Database Info

[SOLVED]Rom Manager Boot Loop after selecting Backup current rom

Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)

Double tread
Inviato dal mio LG-P500 con Tapatalk 2

??.. can u reply in english please.

problem solved.
CLOSE THREAD

help
clawsright said:
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Click to expand...
Click to collapse
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.

Vipuljain_in said:
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Click to expand...
Click to collapse
Even though the the P500 is "supported" by ROM Manager, ROM manager is extremely wonky with that device. ROM Manager is not the only way to install a recovery and IMHO is the worst way to manage that device. ADB, Fastboot, and FlashImageGUI are much safer alternatives. FlashImageGUI requires the 'flash_image' binary to be installed on the device. I've never seen it on a stock ROM for any device but it is usually included with custom ROMs. 'flash_image' can be extracted from /system/bin of any custom ROM and pushed to the device. FlashImageGUI can be downloaded from Play Store. The other two alternatives are a little more cumbersome, but just as effective.
I have written a Windows front-end for the fastboot executable called Android Flash Recovery. Assuming that your device drivers are correctly installed and the device can be booted in to fastboot mode, Android Flash Recovery can make recovery installation much easier. The link for AFR is in my signature.

clawsright said:
problem solved.
CLOSE THREAD
Click to expand...
Click to collapse
Thread closed

SOLVED [soft brick]-[need help] ---Edited

I have a Atrix 2 MB865 which is not a AT&T phone.. It was on ICS before..I rooted it,flashed custom recovery and everything went smooth till here.Then I tried to flash carbon 4.3 unoffical rom through CWM recovery.. Got a message that flash was a success but when I rebooted I got stucked in bootloop.. I tried flashing a stock rom using RSD lite in fastboot mode but everytime it get stucked at "7/20 rebooting cbt.bin fail".. Any help will be greatly appreciated.
Recovery mode is not working and phone is opening is just fastboot mode and no matter what stock rom I flash (ICS or GB) it is stucked at that 7/20 rebooting step and I get a FAIL message... again I say any help will be really appreciated.
EDIT:I can enter stock recovery... will this help???
The above scenario was my problem yesterday and after a lot of browsing and understanding the basic concept I was able to recover my phone.I want to thank to all the Atrix community group for helping me out and providing very good and accurate set of instructions. For me I come from a samsung background so dont have any much knowledge about Motorola chipset but again thanks for the helpful threads/post I was able to recover my phone.
SO THIS IS HOW I RECOVERED
As I mentioned in the above scenario that I was able to enter in fastboot and Stock recovery mode but flashing a stock rom (no matter ICS or GB) wont work because flashing failed in RSD LITE (7/20 Reboot cbt.bin FAIL).
I had drivers and I had antivirus turned off and I have met the every requirement that is favourable for RSD lite to flash stock rom package to my MB865.
Then I saw this THREAD,all thanks to @alteredlikeness.
He proposed a menthod of flashing firmware without using RSD Lite and it WORKED!!!!:victory:
He provided a batch file package and told to extract in your FXZ folder(extracted Stock Rom folder).
As told the device must be connected in fastboot mode to PC and then the batch file should be run ... I followed all the instructions carefully and took a while to run the batch file but in the end it flashed everything and I recovered my phone.
Just in case if anyone has met the above mentioned problem try this method .. It seems to be working for both AT&T and NON AT&T MB865 phones.

[Q] My A110 bricked ...plzz Help

Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.

@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..

ibshar said:
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
Click to expand...
Click to collapse
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???

@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Then you need to flash the stock ROM with SP Flash tool

@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Yes..u can flash through SP tool as said by @IBashar..in case..if u dont want to flash through SP tools..I will suggest u to use someone else SD card & paste ur rom in that & then flash through recovery..as I personally feel that flashing through SP Tool is quite cumbursome..
HIT THANKS IF I HELPED U
Sent from my JMP V13 using xda app-developers app

@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Don't worry bro! Try to boot into CWM again because it should be there. Then try to flash the ROM again...
And remember, in future, always take a Nandroid backup before you install anything, mod or ROM. It really helps in case something goes wrong and phone stops working,

ibshar said:
Then you need to flash the stock ROM with SP Flash tool
Click to expand...
Click to collapse
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..

@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
None of the tools will work unless you install the correct Drivers.. So install teh drivers that are given in the SP Flash tool thread and then try.

@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
I Also Face The Problem With SP Tools 0% Problem Take Out The USB Cable And Insert It Again And After 30-40 Seconds It Will Show The Process Completed 100% And Green Ring Will Be There
Sent from my Micromax A110 (Canvas 2) using xda premium

@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
see the video below

non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro

How to enable usb debugging mode when phone is bricked

Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......

plz can anyone tell how to enable usb debugging mode when phone is bricked.....

if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!

Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..

Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app

Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:

software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???

henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??

Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...

Guys....my question is how to enable usb debugging on a soft bricked device

help me bricked micrmex express 2 plz

my phone too .. I forgot to switch my USB debugging...

Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]

The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!

chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....

Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk

Please Help My S6 International Stuck on android SplashScreen

I had already rooted My S6 and install Xero lite rom It's still work fine. Then I try to install Axis rom in twrp
after i was flash my phone look seem got a bootloop ,my screen stuck on "Samsung Galaxy s6 Powered by android " but sound have loop again and again. I Try to put another rom file with Usb Cable and it didn't work then i try to flash stock rom with Odin because my phone still able to get in download mode but when i click start to flash It Show error and fail
can anyone help me please?
Sorry for my bad English skill.
Thankyou.

Bring your S6 back to Samsung for warranty repair.

tan3warut4 said:
I had already rooted My S6 and install Xero lite rom It's still work fine. Then I try to install Axis rom in twrp
after i was flash my phone look seem got a bootloop ,my screen stuck on "Samsung Galaxy s6 Powered by android " but sound have loop again and again. I Try to put another rom file with Usb Cable and it didn't work then i try to flash stock rom with Odin because my phone still able to get in download mode but when i click start to flash It Show error and fail
can anyone help me please?
Sorry for my bad English skill.
Thankyou.
Click to expand...
Click to collapse
When you tried to installed Axis ROM you do a dirty flash or a clean wipe? Can you still get into twrp recovery?
Piece of advice always do a backup or at least have a backup available on your phone.
Make sure to do a clean wipe and then install the ROM. If none of them work flash the official stock ROM for your phone via Odin