Related
So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Mine is 2 months old and i had the clicking issue from the beginning but it didn't got worse and to be honest i don't even notice the clicks anymore (i guess that my brain got used to it ).
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2
Ok, thanks mate... hopefully it won't get any worse. I'll give it a week or two and see if mine spreads at all.
Nexus 7 has same problem
Sent from my Nexus 7 using Tapatalk 2
MisterEz said:
So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Click to expand...
Click to collapse
Send it back - that's not acceptable for a highend electronic product. You keep doin this until you get one with accaptable build quality or you buy another brand. Choice is yours. But never accept poor build quality in high end consumer electronics
Had mine for about 3 weeks and received a screen protector a couple of days ago, no problems with the screen but was worried applying the screen protector would show up any defects clickingwise. Panic over screen protector on and display is looking good.
Yeah, I think too many people here accept the fact that their unit has some fault and then just think "well, it could be worse. Be happy with what you got". No way! this should be THE high end tablet, one of the most expensive ones there are and then it has this kind of faults.
IF everybody would be same and think "well this is ok" then Asus wouldn't even learn from their mistakes. They would just keep on with the crappy QC and nothing would be fixed. Maybe they would even worsen the qc to save money and try to find out where is the line that people don't accept the product.
For me, I spend a lot of money and I want my unit be perfect out of the package. It is other issue then if I break it..
I too am having some screen issues, but I think I will have to send my unit back to ASUS completely. Most Dutch retailers only have a very short return period, and I've already had mine for 19 days. I guess I will contact the retailer and ask them what I should do. However, it is really unacceptable that you pay a high price for such a premium product and that it has issues that really should not ocur. The reason why I didn't go back to the retailer was because I didn't really notice it at first, it just got more annoying later on...
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Mine has the loose screen issue all around. But no clicking. So I'm having the same debate in my mind. I think I'm going to return and try for another one.
Sent from my PC36100 using xda app-developers app
I'm returning my 2nd TF700t tomorrow 'cause of loose screen. This time it also made the clicking sound :/
Mine has a loose screen but it's the lower left hand corner by the headphone jack, hdmi port, microphone area. You don't even need to squeeze it hard, it feels hollow in that area and it makes a crunching sound. My biggest fear is the ports there are either going to get damaged or cause a short touching the case. Amazon is sending me a replacement which I should have tomorrow.
Amazon was really gracious in taking my 201 back that I bought in May, but man, WTF, I love Tegra games so the samsung tab is out and I hate Samsung with their wishy washy update and the fact they stop supporting their legacy products fairly fast.
If this next one is trash I don't know what to do, I don't want to be banned by Amazon for returns, sucks ass.
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
MisterEz said:
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
Click to expand...
Click to collapse
If you check out the Nexus 7 forum (also an ASUS tablet) you can gleam some interesting information about the screen separation issues. It's not as easy to take the Infinity apart, so fixes aren't readily available, but I'm sure the issues are related.
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Thats OK said:
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Click to expand...
Click to collapse
From the ASUS Nexus 7 forums I understand that the loose screen/screen separation may be due to adhesion issues that can be somewhat or completely solved by gentle heat followed by light, consistent pressure. Someone did try that with his Infinity with limited results but I think his frame may not have fit properly as well. The crunching sound some have reported may be due to a really crunchy type of tape used to hold down the battery, if there's any excess flex that causes the screen/digitizer to touch the tape. There was also a screen lift/light bleed issue caused by over-tightened screws in the frame holding the motherboard, etc together. That was user fixable, by just loosening the screws and making sure that they were all fairly evenly tightened. That also really helped with the light bleed issues too.
I received my replacement from Amazon, this one is all good, it even has the cooler color screen I like compared to original, sweet!
I have just sent back my second tablet to amazon after receiving the first one with nearly jammed in buttons and a clicking screen. The second one I got had a little clicking to start and then got progressively worse until I chose to return it. Amazon emailed me and said that they are just going to refund me my money instead of sending out another one with probably similar problems... don't really know what to do now... any other good tablets coming out? Haha
Sent from my Galaxy Nexus using xda app-developers app
The way these tablets are held together is via a longer L shaped plastic edge on the faceplate that mates top edge first to a the ledge built into the backshell. Once inserted under the shell at the top edge the rest of the screen can lay down into the rest of the backshell. There are smaller L shaped clips up and down the outsides which click into place via finger pressure. The bottom edge is secured by two metal slide locks which mount the front to the back much like an old style door chain where the round part fits into a large hole and then slides into a narrower opening to latch it into place.
The point of this post? if the sides or top seem loose you can probably click them together with finger pressure. if the bottom is loose the latch got locked without the round part in place. for this you should return if you have warranty left. If it crunches they probably broke an L shaped clip while assembling.
I received my 2nd Infinity today and I immediately noticed the screen on the bottom left hand corner is above the frame and the rest of the bottom part of the screen flexes when I hold it normally. I'm sending it back. I'll give the Infinity one more chance and hope I get a good one. If not, I'll have to look at other options. At some point enough is enough.
My advice for anyone that has build quality issues with their Infinity is to return it. That is a lot of money to spend to keep a tablet that could break down the line. I wouldn't take any chances, but that's just me.
Seriously though, does anyone know of any other top end tabs coming out soon? I'm tired of dealing with sh*t quality
Sent from my Galaxy Nexus using xda app-developers app
Long story short, I bought the Transformer Prime and dock in late June. About a month later I traded the tablet for the Infinity and kept the dock since I read many people stating that it was compatible. First thing I noticed with the Infinity is that it required more force to dock the tablet into the keyboard. I had to push down and slide the lock tab to the right to actually lock the tablet. About a couple weeks ago I noticed that with the tablet docked and the lock tab pushed all the way to the right, I could easily slide the tablet upwards and remove it from the dock without sliding the lock tab to the left first. What this means is that the tablet could easily become undocked, causing it to fall easily if held improperly. The locking mechanism seems to work properly, but I'm not sure if the locking pins have become worn or if the part that the pins connect to inside the tablet have rounded off or something. Has anyone else experienced this problem yet, and if so, what are the possible solutions to fix this? If it's a problem with the dock, I'll probably just end up buying the newer dock ASUS released recently that's stated to be compatible with the Infinity. I've also thought about taking my tablet to Best Buy and seeing if it will dock securely with one of their docks to see if I can rule out the dock. If it's a problem with the tablet itself, I guess I'm SOL. Right now I'm staring at bits of a torn up paper towel, contemplating shoving them into the holes to see if it will temporarily fix the problem, lol.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
I'm guessing you have the same problem as me. There are plastic hooks that are on the dock latch and they broke off on mine. I just figured the problem out last week. I'm going to try to send it back soon for warranty.
First thing I noticed with the Infinity is that it required more force to dock the tablet into the keyboard. I had to push down and slide the lock tab to the right to actually lock the tablet.
Click to expand...
Click to collapse
Yikes. I had this experience too. Mine is still secure though. I hope that doesn't change.
jmeridith said:
I'm guessing you have the same problem as me. There are plastic hooks that are on the dock latch and they broke off on mine. I just figured the problem out last week. I'm going to try to send it back soon for warranty.
Click to expand...
Click to collapse
Just wondering, is the dock still covered under warranty if your bootloader is unlocked? I'd like to send my dock to Asus if I find out the latches on it are broken.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
I have the same problem
bhambalek said:
The locking mechanism seems to work properly, but I'm not sure if the locking pins have become worn or if the part that the pins connect to inside the tablet have rounded off or something. Has anyone else experienced this problem yet, and if so, what are the possible solutions to fix this?
Click to expand...
Click to collapse
I have your exact problem! There is nothing wrong with the locking pins on mine. They're metal and are designed not to be damaged if the tablet is inserted in the locked position. The issue is the locking pins do not line up with the small piece of metal in the locking grooves/holes on the tablet. I can see tiny abrasion marks a few millimetres in front of where they should be at the bottom of my tablet showing that they simply are not lining up.
The issue is with the dock. This should be covered on warranty.
R.e. trying to buy another one - I would warn you that consensus appears to be that the TF700 dock is structurally identical in every way to the TF201 dock. The only difference is the finishing colour which is slightly different and the cost of the TF700 dock which ASUS kindly increased.
My unit came together with a 'TF700' dock and the colours match. And like you it was a very tight fit to start with. I didn't notice the latch problem until last week though (because I actually never tried to remove the tablet with the lock mechanism ON before!).
Thanks dude. Would anyone be kind enough to direct me to Asus's warranty claims department? I can't f find a link to save my life lol.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
How did you get on with the warranty repair?
I have opened up a POLL on transformer forums to see how many users have experienced the docking pins in the tablet either rounding off or snapping off completely.
I'd really appreciate if any of you see this message would go there and make a report to have your voice counted.
You can find it here:
http://www.transformerforums.com/fo...ining-pins-snapped-off-poll-you-affected.html
Also, there's another thread that covers this issue (among possible other issues) here:
http://forum.xda-developers.com/showthread.php?t=2107044
I've been in contact with ASUS Support in the Netherlands -- they claim it is user-induced damage. I have written a slightly spikier mail, but will have to weigh my legal option if they remain on their stance. A device this expensive should have better build quality.
jmeridith said:
I'm guessing you have the same problem as me. There are plastic hooks that are on the dock latch and they broke off on mine. I just figured the problem out last week. I'm going to try to send it back soon for warranty.
Click to expand...
Click to collapse
Did you try ASUS warranty? There is a poll here
... trying to get ASUS to recognise this is a design flaw and not customer induced damage
because
a) The docking tabs in the tablet are PLASTIC
b) There seems to be a tendency for left or right side of tablet to 'catch' in the dock as you remove it and if this occurs just before you release the locking tab---- crack! Locking tab should have hold fast LOCK and UNLOCK positions instead of being spring loaded
I too have this problem. We actually have 2 Infinities and 2 docks. One tablet works fine with both docks, and the other won't stay connected to either dock, so it's definitely the tablet that is broken. Looking inside I can see both plastic pieces are broken off.
What are people's experience with this? Is Asus telling they won't cover it before you even send it in? Are they giving any estimates for what it costs to repair? Pretty crappy that they make a small structural item out of plastic and then say "screw you".
ldkronos said:
I too have this problem. We actually have 2 Infinities and 2 docks. One tablet works fine with both docks, and the other won't stay connected to either dock, so it's definitely the tablet that is broken. Looking inside I can see both plastic pieces are broken off.
What are people's experience with this? Is Asus telling they won't cover it before you even send it in? Are they giving any estimates for what it costs to repair? Pretty crappy that they make a small structural item out of plastic and then say "screw you".
Click to expand...
Click to collapse
Yes, this is the oen issue that made me put ASUS on my blacklist of ****ty companies -- they put it on "user-induced damage", unseen, and if you send it in, they'll take the 125 Euros anyway, even if they only take a crap and wipe their ***es with the RMA form. I'm happy with the tablet as it nw runs, but NONE of that happiness has to do with AUSS' screwy behavior, poor hardware design decisions and even worse customer support.
I was looking for a Win8 tablet for the family, but the only viable option for now is the HP Envy v2 -- as I said, I will never buy ASUS again. And I have never boycotted anything in my life, be it digital or physical, so that says something. :S
Hello,
I've bought my infinity two weeks ago and when I unpacked it I had noticed that on the bottom left side of the panel the screen is popping out a little bit, something like screen flex.
Yesterday, I've noticed that the left side of the panel has a flex as well.
I am really annoyed by this, since OK, I've paid a lot of money for this and now I might have to send it for a repair.
I've talked with the asus support in Greece, and the guy told me to submit a form that he would send me via email and a courier would get it from my house and it would be sent to Czech Republic for service and it would be delivered to me in a maximum of ten days.
Should I send it?
Is it really a big problem? (in example, will the whole panel pop out eventually :silly: )
I though of keeping it for some time and if it gets worse, then sending it..
What do you think?
Thank you for your time,
Sorry for the big post..
did you bu it from a store, or online? if from online, send it back to the company and have them send you another. this might be quicker than sending to ASUS.
I bought it from a store in Greece..I called them and they referred me to Asus support in Greece..
Is this screen flexing a big problem or I can leave with it?
pspuser007 said:
I bought it from a store in Greece..I called them and they referred me to Asus support in Greece..
Is this screen flexing a big problem or I can leave with it?
Click to expand...
Click to collapse
i dont see they the store cant exchange it. especially if you have the receipt.
im not sure if its a big problem, but i wouldnt want a device that has defects like that.
timrock said:
i dont see they the store cant exchange it. especially if you have the receipt.
im not sure if its a big problem, but i wouldnt want a device that has defects like that.
Click to expand...
Click to collapse
They won't
I might keep it for a while..I've stopped noticing it too much..The thing is, if it's something normal that did occur from the manufacturing process then I'm OK with it. I just don't want to end up holding the tablet at one hand and its screen at the other
pspuser007 said:
They won't
I might keep it for a while..I've stopped noticing it too much..The thing is, if it's something normal that did occur from the manufacturing process then I'm OK with it. I just don't want to end up holding the tablet at one hand and its screen at the other
Click to expand...
Click to collapse
From what I've read this is very normal for the Infinity. A lot of people have had similar problems with screen flex or even screen separation. Unfortunately most of them when the receive a replacement, the replacement is either the exact same problem or is even worse. So there is definitely something with the Gorilla Glass and their manufacturing process causing this that they haven't ironed out yet.
From what I've read if it's minor then it shouldn't be too big a problem (some people have the Gorilla Glass almost peeling off). I just got mine and notice the screen sticks up slightly above one of the dock connection points on mine, but knowing the problems others have had I'll use mine for a few days to see if it's worth returning.
So while you can certainly return if you want, considering what you paid it's understandable. But just know that the replacement you get is likely to have at least the same problem, and might actually be worse then the one you sent in. Another somewhat common problem is light bleed, which I think I have on mine also.
bobby2478 said:
From what I've read this is very normal for the Infinity. A lot of people have had similar problems with screen flex or even screen separation. Unfortunately most of them when the receive a replacement, the replacement is either the exact same problem or is even worse. So there is definitely something with the Gorilla Glass and their manufacturing process causing this that they haven't ironed out yet.
From what I've read if it's minor then it shouldn't be too big a problem (some people have the Gorilla Glass almost peeling off). I just got mine and notice the screen sticks up slightly above one of the dock connection points on mine, but knowing the problems others have had I'll use mine for a few days to see if it's worth returning.
So while you can certainly return if you want, considering what you paid it's understandable. But just know that the replacement you get is likely to have at least the same problem, and might actually be worse then the one you sent in. Another somewhat common problem is light bleed, which I think I have on mine also.
Click to expand...
Click to collapse
I've noticed the same across the bottom in mine. It appears exactly where the docking latched are located. I'm no longer going to leave the dock attached. I'll hook it when I really need it then remove and put it aside. I'd say the dock is putting too much strain on the glass. The docking hinge on mine is VERY tight to flip;p open and closed as well
i got a tf300 from ebay , with a broken digitizer opened it up to see the model (of the digitizer) and left it with out a one for the meanwhile
i also ordered a keyboard and a digitizer ( 5158N) , the key board got to me first .
i connected it so ill be able to use the tablet
but the screen seems as some one is touching it all over all the time !
i dont know what to do ,
it open apps on its own , move screens and so on ...
any ideas ?
natifr said:
i got a tf300 from ebay , with a broken digitizer opened it up to see the model (of the digitizer) and left it with out a one for the meanwhile
i also ordered a keyboard and a digitizer ( 5158N) , the key board got to me first .
i connected it so ill be able to use the tablet
but the screen seems as some one is touching it all over all the time !
i dont know what to do ,
it open apps on its own , move screens and so on ...
any ideas ?
Click to expand...
Click to collapse
Hehe, that did happen to some of us. In my case, I first flashed the 4820 TS firmware. If that doesn't stop the mad behaviour, then carefully remove the TS ribbons from the board, and tape them on top of the connectors, making sure they don't touch any conducting metal parts.
graphdarnell said:
Hehe, that did happen to some of us. In my case, I first flashed the 4820 TS firmware. If that doesn't stop the mad behaviour, then carefully remove the TS ribbons from the board, and tape them on top of the connectors, making sure they don't touch any conducting metal parts.
Click to expand...
Click to collapse
so from what you say i need to root it first , right ?
so i open it up and toke out the part thats connect the main board and the TS ( i dont have the TS anyway)
and now im using it with the keyboard and its find !!!
so now i want to know what thus it mean ?
that part is broken ?
it dosnt work w/o a tuch screen connected ?
natifr said:
so i open it up and toke out the part thats connect the main board and the TS ( i dont have the TS anyway)
and now im using it with the keyboard and its find !!!
so now i want to know what thus it mean ?
that part is broken ?
it dosnt work w/o a tuch screen connected ?
Click to expand...
Click to collapse
Nothing is broken apart from the TS. But when you have it connected, it acts crazy. Replace it and it should be fine.
natifr said:
so i open it up and toke out the part thats connect the main board and the TS ( i dont have the TS anyway)
and now im using it with the keyboard and its find !!!
so now i want to know what thus it mean ?
that part is broken ?
it dosnt work w/o a tuch screen connected ?
Click to expand...
Click to collapse
You do know you can use a G01 which is much much cheaper right? Mine was a 5158N originally and I got my replacement G01 for 42 USD.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
I get the phantom touches constantly, so it's just bad ribbons and taping them will definitely stop it?
Sent from my ASUS Transformer Pad TF300T using XDA Premium 4 mobile app
MrKite4 said:
I get the phantom touches constantly, so it's just bad ribbons and taping them will definitely stop it?
Sent from my ASUS Transformer Pad TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure what the question is, but taping the ribbons to the connectors is just a stopgap measure when you for some reason must keep the broken digitizer on (as in waiting for the replacement to come in the mail). It might work or not (does in my case, where if ghost touches hit, all I need do is reboot). So I wouldn't say "definitely." What's your situation?
graphdarnell said:
Not sure what the question is, but taping the ribbons to the connectors is just a stopgap measure when you for some reason must keep the broken digitizer on (as in waiting for the replacement to come in the mail). It might work or not (does in my case, where if ghost touches hit, all I need do is reboot). So I wouldn't say "definitely." What's your situation?
Click to expand...
Click to collapse
sometimes the screen goes crazy and starts zooming in and touching areas when I'm not touching the screen, when I put it back in to sleep and then unlock it again its fine, and then also somewhere in the upper right portion of the screen it's send like out didn't react to the touch so well especially when I'm scrolling and hit that part of the screen it'll stop then either act as if I did a long press or act as if I clicked on the browser url.
Sent from my LG-E980 using XDA Premium 4 mobile app
MrKite4 said:
sometimes the screen goes crazy and starts zooming in and touching areas when I'm not touching the screen, when I put it back in to sleep and then unlock it again its fine, and then also somewhere in the upper right portion of the screen it's send like out didn't react to the touch so well especially when I'm scrolling and hit that part of the screen it'll stop then either act as if I did a long press or act as if I clicked on the browser url.
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you have an undamaged digitizer that acts on its own, you're not alone. Most of the time, the remedy is in reflashing the TS frmware. You need to know what type it is so you can select the correct firmware though. Pop the back cover open and look. Check this thread for troubleshooting tips.
graphdarnell said:
If you have an undamaged digitizer that acts on its own, you're not alone. Most of the time, the remedy is in reflashing the TS frmware. You need to know what type it is so you can select the correct firmware though. Pop the back cover open and look. Check this thread for troubleshooting tips.
Click to expand...
Click to collapse
Would be nice if someone has any NEW light to this matter "Crazy screen"
Me too have this problem and been reading everything in here to remedy that problem.
that 50 page long thread has gone to more questions than answers.
it seems that replacing the TS and the board and the 4820 firmware still gives the "Crazy screen"
I've seen even a brand new TF300T without any visible defect that has the same fault.
has anybody found other firmware to TF300T than 4820.. maybe it isnt 100% compatible with all cheep china TS?
unob said:
Would be nice if someone has any NEW light to this matter "Crazy screen"
Me too have this problem and been reading everything in here to remedy that problem.
that 50 page long thread has gone to more questions than answers.
it seems that replacing the TS and the board and the 4820 firmware still gives the "Crazy screen"
I've seen even a brand new TF300T without any visible defect that has the same fault.
has anybody found other firmware to TF300T than 4820.. maybe it isnt 100% compatible with all cheep china TS?
Click to expand...
Click to collapse
I ordered a cheap g01 for 43 bucks. I then flashed 4820 firmware. No problem at all and its more responsive than the original 5158n.
The boards do also go bad apparently. You can pick one up for 15 usd on ebay. Regardless what version the board came from, you will have to flash.
I recommend every one with issues go with the g01 as its firmware is readily available and actually has a proven track record of working. Its also the cheapest version available ( mine was also an original Asus part for that price )
Just make sure you have root access first.
Sent from my SGH-T889 using xda app-developers app
pyraxiate said:
I ordered a cheap g01 for 43 bucks. I then flashed 4820 firmware. No problem at all and its more responsive than the original 5158n.
The boards do also go bad apparently. You can pick one up for 15 usd on ebay. Regardless what version the board came from, you will have to flash.
I recommend every one with issues go with the g01 as its firmware is readily available and actually has a proven track record of working. Its also the cheapest version available ( mine was also an original Asus part for that price )
Just make sure you have root access first.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Glad to hear happy stories.. too little of them here
i replaced mine TS g01 without changing firmware (i had 4822).
i ran it about 9-10 hours straight and no glitch at all before it began to ghosting.
and then flashed the TS firmware to 4820 with no difference (still ghosting)
i think people have triggered the same problem when replace their TS. (it wasn´t "the cap" problem) and will not necessarily engage immediately after the replacement.
it's really a ghost story.
unob said:
Glad to hear happy stories.. too little of them here
i replaced mine TS g01 without changing firmware (i had 4822).
i ran it about 9-10 hours straight and no glitch at all before it began to ghosting.
and then flashed the TS firmware to 4820 with no difference (still ghosting)
i think people have triggered the same problem when replace their TS. (it wasn´t "the cap" problem) and will not necessarily engage immediately after the replacement.
it's really a ghost story.
Click to expand...
Click to collapse
In that case its either a bad board, or a bad digitizer. There were reports of new screens that looked intact actually having micro fractures that dont act up until the unit had been on and running ( heating up ). I'd try the TS / Micro SD daughterboard first though as its cheaper and easy to access. Worst case scenario is you get a spare or see if someone here wants to pick it up from you. For $15 its worth a shot.
Heres the exact OEM G01 I ordered ( It does have the Asus Logo )
http://www.ebay.com/itm/360697697608?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I cant find any cheap boards on ebay right now but they are frequently listed in the 15-20$ range. You will just have to keep your eyes peeled I guess.
pyraxiate said:
In that case its either a bad board, or a bad digitizer. There were reports of new screens that looked intact actually having micro fractures that dont act up until the unit had been on and running ( heating up ). I'd try the TS / Micro SD daughterboard first though as its cheaper and easy to access. Worst case scenario is you get a spare or see if someone here wants to pick it up from you. For $15 its worth a shot.
Heres the exact OEM G01 I ordered ( It does have the Asus Logo )
http://www.ebay.com/itm/360697697608?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I cant find any cheap boards on ebay right now but they are frequently listed in the 15-20$ range. You will just have to keep your eyes peeled I guess.
Click to expand...
Click to collapse
Thanx for your help. i got lucky coz my seller agrees to send me a new TS and it has been on the road for 2 weeks now...
meanwhile i have found too many people having the same problem so my faith is failing
i will report back.
unob said:
Thanx for your help. i got lucky coz my seller agrees to send me a new TS and it has been on the road for 2 weeks now...
meanwhile i have found too many people having the same problem so my faith is failing
i will report back.
Click to expand...
Click to collapse
Sounds like a plan Hopefully it's just a bad digitizer then.
Sent from my SGH-T889 using xda app-developers app
I was on CM10.2, So I change to asus stock rom and than I lost my root.
How do I root my TF300T without touch screen?
I am on 10.6.1.27.1 with TWRP 2.5.0.0 and I have a docking station.
mwvarela said:
I was on CM10.2, So I change to asus stock rom and than I lost my root.
How do I root my TF300T without touch screen?
I am on 10.6.1.27.1 with TWRP 2.5.0.0 and I have a docking station.
Click to expand...
Click to collapse
i did it with cheap "OTG Host Kit Adapter tf300t" from ebay and usb mouse.. easy as with working TS.
here is the report.
Now i have replaced the new TS. and the Ghost Story is still there?
But it is not random anymore. Now it is only one dot ghosting all the time? (top right corner). I assembled it twice but no avail.
by the way, they sent me "White label" version instead of G01 and i think it worked better (less ghosting).
interesting to hear opinions?
pyraxiate said:
Sounds like a plan Hopefully it's just a bad digitizer then.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
sorry to reply like this.. but i thought maybe you respond if it is to your own response.
hope someone has some light to my discovery.??
only one dot left now .. any suggestions ??
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Tunameltsalad said:
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Click to expand...
Click to collapse
Same thing happened to my brother's tf300t. He returned it as defective, but I guess you could replace the digitizer. As far as I saw, it was a hardware problem, so it requires a hardware fix. Sorry
cmendonc2 said:
Same thing happened to my brother's tf300t. He returned it as defective
Click to expand...
Click to collapse
Was it through amazon? Do you know if he unlocked it?
Tunameltsalad said:
Was it through amazon? Do you know if he unlocked it?
Click to expand...
Click to collapse
Yes it was through amazon. He had unlocked it and installed TWRP and CROM or CM i dont remember.
Tunameltsalad said:
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Click to expand...
Click to collapse
I got a similar situation in the last two weeks. The problem I have is that my TF300T is keeping rebooting by itself. I've googled it and people say most likely it's a hardware issue. I am trying to find a way to see if the device can be reset to factory condition so that I can return it for repair. Looks like we are on a same boat. Hopefully I can find a way to do so.
Just an update on my issue, in case anyone else stumbles across this particular problem. So far I have gone almost a week with no ghost touches. I popped off the back of the device (three guitar picks did the trick), and disconnected the digitizer ribbon cables and reseated them. Problem vanished. My best guess is that the keyboard dock puts odd pressure on the device. That mixed with rough handling is bound to cause some problems.
The problem I have is that my TF300T is keeping rebooting by itself. I've googled it and people say most likely it's a hardware issue
Click to expand...
Click to collapse
It could be the power button is jammed? I know mine is really touchy (all I do is tap it with my stylus and screen turns on/off. Good luck!
Sent from my TF300T using xda app-developers app
Tunameltsalad said:
Just an update on my issue, in case anyone else stumbles across this particular problem. So far I have gone almost a week with no ghost touches. I popped off the back of the device (three guitar picks did the trick), and disconnected the digitizer ribbon cables and reseated them. Problem vanished. My best guess is that the keyboard dock puts odd pressure on the device. That mixed with rough handling is bound to cause some problems.
Click to expand...
Click to collapse
Thank you. I just got mine from Groupon as refurbed.. (they did a ****ty job, apparently) Ghost issue about 2 days after getting it out of the box. By then already unlocked and flashed CWM.. sigh.
I'll try your fix tonight. Any chance there is an image of the right connector/ribbon?
Hopefully the image quality isnt too bad. I took an exacto knife and gently pried up the black foam squares, set them aside and worked my magic. Hope this helps. Just be careful with the ribbon cable (duh). Hope this helps!
Sent from my TF300T using XDA Premium 4 mobile app
Tunameltsalad said:
Hopefully the image quality isnt too bad. I took an exacto knife and gently pried up the black foam squares, set them aside and worked my magic. Hope this helps. Just be careful with the ribbon cable (duh). Hope this helps!
Sent from my TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you! I'll try this adventure later this week.
Did this today.. So far, 20 mins on it, and no issues. Typically took about 5-7 mins before. So, crossing my fingers this is gone.
THANK YOU! I can go back to enjoying my tablet
Im in the same boat with this Ghost Touches Issues, and its getting worse, sometimes im working at college and this Ghost appears and the tablet gets almost unusable, Only the Keyboard Dock saves me.
Please if you can give me more detailed instructions i think i would be brave enought to do this surgery to my tf300t, merry christmas!
elestudiante said:
Im in the same boat with this Ghost Touches Issues, and its getting worse, sometimes im working at college and this Ghost appears and the tablet gets almost unusable, Only the Keyboard Dock saves me.
Please if you can give me more detailed instructions i think i would be brave enought to do this surgery to my tf300t, merry christmas!
Click to expand...
Click to collapse
i just noticed that when having a ghost touches attack, if i put pressure con the tablet, lime trying to bend it, the touches vanish.
I also have the ghost touches but it seems to only happen when the screen is dirty. As soon as I clean it off, they go away. Would a good screen protector help with that? I may go ahead and try taking off the back and messing with it.
Sent from my AOKP Galaxy S4
I thought mine was fixed, but doesnt seem to be. I technically didnt remove the connectors.. I was nervous, they are WAY fragile. I simply unlocked and pressed firmly on them to attempt to reseat them..
Problem seemed to go away until I used Chrome. Chrome is what seems to trigger odd behaviors for me. I may try another browser and see if it still happens.
I've been dealing with this off and on for about 8 months; asus HAS to be aware of it as my tab has been back twice for this issue (out of warranty now) and I take advantage of their complaint form every month or so.
Here's what I've been working off of (based on personal experience/experimentation):
Re-seating the cables might help for a day or less, but isn't a permanent fix. I even went as far as strategic pieces of tape to hold the flex cables in place and tape across the connectors to encourage them to stay closed.
The first time I popped the back off the larger of the three flexes (with the silver wrap) had partially worked out of the connector on the driver board. Re-seated it and problem disappeared for about a day.
The large copper heat spreader was basically spot contacting the CPU and really wasn't touching the smaller ancillary chips (unit had been running warm for a few months, thought that might make things wonky). I pressed heat shield back down to ensure adhesion, and slightly molded the copper around each chip. Ghost touch gone for two days, unit way cooler running than before.
Here's the interesting one to me. Tonight I noticed that even just hovering my finger close to the screen I can get the 'touch dot' to show; this got me thinking about static. I held the tab in a way that at least one finger of one hand was touching the screen, like towards an edge (out of the active area) while using the other hand to touch the screen. Seemed like one hand was grounding the screen, like a charge couldn't dissipate from the surface.
Isn't this a "capacitive touch' screen? Could it be a matter of grounding?
I too purchased this tablet and dock from Groupon about 4 weeks ago or so as a manufacture refurb. My tablet does the same thing. After about an hour or so use most of the time it starts randomly acting like the screen is being touched. And it appears to only be in the upper right corner area (kinda where the lock screen pattern show up when you unlock it) in landscape mode. Sometimes it may take a little longer of use before it happens. It happens regardless if the dock is plugged in or not. I have figured that if I lock the screen and wait a few seconds and then unlock it. The ghost touches are gone for a while. I first began thinking it may have been a OS issue and hough about rooting and putting a custom rom on it. But from what I have seen on the web it doesnt seem to matter whether its rooted or not. So should I RMA it back or has any one had permenant luck with reseating the cable?
Thanks
ItsDuckie said:
I too purchased this tablet and dock from Groupon about 4 weeks ago or so as a manufacture refurb. My tablet does the same thing. After about an hour or so use most of the time it starts randomly acting like the screen is being touched. And it appears to only be in the upper right corner area (kinda where the lock screen pattern show up when you unlock it) in landscape mode. Sometimes it may take a little longer of use before it happens. It happens regardless if the dock is plugged in or not. I have figured that if I lock the screen and wait a few seconds and then unlock it. The ghost touches are gone for a while. I first began thinking it may have been a OS issue and hough about rooting and putting a custom rom on it. But from what I have seen on the web it doesnt seem to matter whether its rooted or not. So should I RMA it back or has any one had permenant luck with reseating the cable?
Thanks
Click to expand...
Click to collapse
I'd try reseating the ribbons. I kind of doubt it would solve the problem since it's a refurbished with a latent defect. Bad ribbons would strike at random but do not wait for a while before acting up. Look at the glass surface under a magnifying glass and bright light. Hairline cracks cause this after the tab heats up, but you can't always detect them. RMA would be the safe option unless you're really pressed for time.
Ghost touches are back. Noticed I had alot of them when my storage was full. Used a previous recovery (same ROM, just earlier date with less junk installed) and it cut down the frequency of them happening. This is so weird.
I had those ghost touches when 4.2 roms started (CM and AOKP and all of the rest of them. Then someone, I don't remember who had compiled rom with decreased touchscreen sensitivity and ghosting was gone. I think they started with PAC or AOKP, I really don't remember.
Then I went to 4.3 and 4.4 roms and I didn't have one single ghost touch since then. I do noticed sometimes when I hover finger over screen it is registered as touch, but ghosting by itself didn't occur on those roms.
one cent fix
I have an ugly, but effective solution working on my pad right now. It has been in place for about three or four months.
Holding in landscape mode, pulled the bottom left corner back slightly and inserted a penny between the back and the lcd. This put enough torque on the screen to kill all of the ghost touches and it still fits into the keyboard dock. There is an ugly gap where the penny is, but it is now fully functional.
Hope this helps some of you