Related
Im trying to install a new rom in my gtab and for some reason when i plug it into my laptop the gtab is not popping up on the computer?????? I turned on debugging just like i did when i originally did it.?????????????? Its a sony laptop running windows 7 home premium any ideas?????
withoutcomp1 said:
Im trying to install a new rom in my gtab and for some reason when i plug it into my laptop the gtab is not popping up on the computer?????? I turned on debugging just like i did when i originally did it.?????????????? Its a sony laptop running windows 7 home premium any ideas?????
Click to expand...
Click to collapse
debugging allows adb to work.
You need to turn on usb storage on your tablet for your computer to see it.
How do i do that?
I have cyanogenmod installed in it
It should be in the notification area on your tablet every time you plug your computer into your tablet. "USB connected. Select to copy files to/from your computer"
select it and then press the button "Turn on USB storage"
When you are done then press "Turn off USB storage"
Thats what i thought but theres nothing there??????
withoutcomp1 said:
I have cyanogenmod installed in it
Click to expand...
Click to collapse
I installed cm6.2 beta last night and I think it mounts the sdcards differently than any of the other roms. Be aware there are some differences in this rom but the usb mount is universal
So what do i do? I got noting here, is ther something in the setting i have to change?
If you have clockwork recovery installed then boot into clockwork recovery. (if not then install clockwork recovery 0.8)
Plug tab into computer with USB cable
Go into "mounts and storage"
"mount USB storage"
Don't know if it makes a difference but I only use the mini usb port on the tab.
I didn't have cm 6.2 installed long because it still has all the 3g stuff on it but it seemed to me it was seeing my external sdcard (sdcard2) as my internal sdcard (sdcard). You could try putting the update.zip on a micro sdcard and putting that in the tab and then seeing if clockwork sees it to install
Did that and still nothing
Any other ideas?
hi, I just installed Vegan-Tab 5.1 and i tried to connect the USB to my computers (windows vista/xp) neither of them recognizes the removable disk. gtablet shows USB connected, and on my PC it asked for installing Nvidia Harmony driver, i dont have one so the system failed to install it. Then drive E: shows up, but when i click it it shows "please insert a disk into removable disk E:".
When i had the original TNT ROM although it prompted for install Nvidia Harmony but i can still access E:.
Please help.
Well I think you need to turn on USB storage on the tablet
Drag notification bar down and select files to copy to/from computer
Then enable USB storage
I just installed the same rom and am having the same problem. Can't find a way to get my computer to see the usb, it shows up, but asks for disc.
I'm also having the same issue, PC won't "see" the tablet
also USB thumb drives are not recognized anymore
Missing USB Flash
I'm having the same problem running Vegan 5.11 and it can't see a flash drive plugged into it.
Ed Kinsel
Big Ideas
Finally got BigIdeas installed and I don't have usb either. It shows up on the PC but it asks for a disk. When I (try) to enable it on the tab it just sits and the little icon turns like it's tryin but I get nothing? Any help would be appreciated. Thanks, Howie
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
dootle said:
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
Click to expand...
Click to collapse
No prompt comes up when PC is connect to device.....
Plug in USB................... nothing happens
Also, I noticed that when a SD Card is inserted, the text under >settings>SD Card & Device storage> READS "unmount in progress" after you mount the SDCARD
Now it's working
meandg5 said:
Finally got BigIdeas installed and I don't have usb either. It shows up on the PC but it asks for a disk. When I (try) to enable it on the tab it just sits and the little icon turns like it's tryin but I get nothing? Any help would be appreciated. Thanks, Howie
Click to expand...
Click to collapse
Went into CWM and mounted the USB drive, rebooted, and now it works fine?
Also, when I am in ES file explorer and I am navigated to the /sdcard
it reads ""sdcard unmounted or not present"
got it all figured out......
Still not seeing the flash
Does connect through the mini USB to the internal SD storage...
Anyone know id there's any docs for the Vegan system?
Ed Kinsel
dootle said:
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
Click to expand...
Click to collapse
I am a noobie, how do you enable this on Vegan tab ? TnT Lite had a prompt.
DLP-ROB said:
got it all figured out......
Click to expand...
Click to collapse
I'm having the same problem with the unmount in progress. Can you please tell me how you figured it out? I've done everything including nvflash, CWM, to start fresh and I still am making no progress.
Thanks
I had the same problem. Here is what worked for me.
1. Plug in your USB.
2. You should see the USB icon show up on the top left taskbar.
3. Swipe that taskbar downwards.
4. Click on "USB connected"
5. Click on the "Turn on USB Storage" icon on the bottom right of the screen.
6. Click "OK"
Your drive letter should be mapped on your PC, you should be able to drag and drop files. When you are done, just click the "Turn off USB Storage" icon. You can now disconnect your USB cable.
Hope that helps.
Thank you so much. This is simple once you know it, but I was completely stumped. Am still getting used to the UI.
Thanks! Saved me a lot of possible pain.
Thank you very much!!! Iwas in the same fix!
DLP-ROB said:
got it all figured out......
Click to expand...
Click to collapse
That posting is really helpful (sarcasm). How did you get it figured out?
I'm having the same problem and I'm not getting the USB connected symbol or any other notification from the tablet that the PC is connected.
I'm running CM with the clemsyn kernel 2.6.32.9.
I wiped and cleared everything (cache, SD Card...) from the settings in order to install the new Ice Cream rom which I got working but then wanted to clean everything up. So obviously after doing the formats, it also wiped the zip (icecream). I can access clock work recovery, but it doesn't recognize my USB at all, same machine and cable is fine. I am trying to do it as a USB Mass Storage device but still it cannot recognize it. Any help would me much appreciated.
namsu55 said:
I wiped and cleared everything (cache, SD Card...) from the settings in order to install the new Ice Cream rom which I got working but then wanted to clean everything up. So obviously after doing the formats, it also wiped the zip (icecream). I can access clock work recovery, but it doesn't recognize my USB at all, same machine and cable is fine. I am trying to do it as a USB Mass Storage device but still it cannot recognize it. Any help would me much appreciated.
Click to expand...
Click to collapse
I'm not sure if you mean SD storage and not USB but you should have never formatted your SD storage.
In clockworkmod recovery there is an option to mount the SD storage. Make sure its mounted and then try activating the USB storage again. This should give you the ability to add a ROM zip file on the SD storage so you can flash it.
Thanks for the reply. Basically I am in clockwork recovery mode, I mount the SDCARD, then I go and select the option "mount USB storage". Sometimes I find that it finds Android 1.0 and I see the I: come up but then goes away quite quickly. But most of the time it comes up as unrecognized.
Now I have 2 cables, both which charge the phone fine. I have used one on a BlackBerry and remember it does the job of connecting as a data connection fine. Also have tried my XP laptop, same result.
My feeling is that it may possibly be the actual USB port on the phone that is the problem but I am unsure in this. It never failed to connect when the phone was working properly (in an actual OS).
You should update your CWM... 5.0.2.0 is the latest version.
But anyway, you don't need to mount SD card then mount USB storage. Only need to do the latest. Once you do this, unplug and replug the phone, the drive should pop up.
polobunny said:
You should update your CWM... 5.0.2.0 is the latest version.
But anyway, you don't need to mount SD card then mount USB storage. Only need to do the latest. Once you do this, unplug and replug the phone, the drive should pop up.
Click to expand...
Click to collapse
When I go into clock work recovery it says USB device Unrecognized. Problem is I don't have anything on the SD I have the ROM on my computer. Whether I go to the mount USB storage menu or not. Unsure what to do?
namsu55 said:
When I go into clock work recovery it says USB device Unrecognized. Problem is I don't have anything on the SD I have the ROM on my computer. Whether I go to the mount USB storage menu or not. Unsure what to do?
Click to expand...
Click to collapse
I imagine you don't have a working adb setup on your computer to update CWM, right?
Boot into CWM with phone plugged in. Go to mount USB storage. If your "SD" isn't recognized, still on that screen, unplug and replug phone. It should get detected then.
Tried this several times keep getting Unknown Device. I installed the SDK with Google Drivers. Unsure if that is the ADB set up.
namsu55 said:
Tried this several times keep getting Unknown Device. I installed the SDK with Google Drivers. Unsure if that is the ADB set up.
Click to expand...
Click to collapse
Yes that's the adb setup.
You might need to manually install the drivers for your phone, although this shouldn't impact on the SD mounting capabilities. Just to make sure, I would get a working adb setup and use fastboot to update your Clockworkmod Recovery to 5.0.2.0.
You can follow this to know how to use fastboot
http://wiki.cyanogenmod.com/wiki/Fastboot#Flash_Custom_Recovery.img
If you have trouble getting your phone to be detected and the drivers installed, I suggest you use PDAnet drivers instead (if you're under Windows). Some phones for some reason need .inf driver hacking to get detected.
http://junefabrics.com/android/
I will give this a go many thanks.
polobunny said:
Yes that's the adb setup.
You might need to manually install the drivers for your phone, although this shouldn't impact on the SD mounting capabilities. Just to make sure, I would get a working adb setup and use fastboot to update your Clockworkmod Recovery to 5.0.2.0.
You can follow this to know how to use fastboot
http://wiki.cyanogenmod.com/wiki/Fastboot#Flash_Custom_Recovery.img
If you have trouble getting your phone to be detected and the drivers installed, I suggest you use PDAnet drivers instead (if you're under Windows). Some phones for some reason need .inf driver hacking to get detected.
http://junefabrics.com/android/
Click to expand...
Click to collapse
Just to let you know, I am trying to access USB Storage from clockwork recovery since I don't have any rom on here at all.
This may sound weird but I held the USB in the phone port in an angle, luckily the removable drive came up. I got the the ROM on the SD it has installed and loading. I'll see if its an issue with the USB on the phone later on but as long as it got back up and running (Ice Cream) for now.
Anyway thanks guys much appreciated. I'll be a lot more careful next time before I go around wiping everything especially the SD LOL.
namsu55 said:
Just to let you know, I am trying to access USB Storage from clockwork recovery since I don't have any rom on here at all.
Click to expand...
Click to collapse
I gathered this much from your posts.
Edit: Glad you got it working. Make sure you get CWM updated whenever you can if you haven't done so, this could lead to problems down the road to flash different zips.
polobunny said:
I gathered this much from your posts.
Edit: Glad you got it working. Make sure you get CWM updated whenever you can if you haven't done so, this could lead to problems down the road to flash different zips.
Click to expand...
Click to collapse
I'll do that next time I get a chance, I thought my phone was gone there for sure. Thanks again.
namsu55 said:
I'll do that next time I get a chance, I thought my phone was gone there for sure. Thanks again.
Click to expand...
Click to collapse
The Nexus S is a difficult phone to brick, luckily. Most of the rooting, bootloader unlocking and flashing steps are easy to follow too.
No problem!
namsu55 said:
This may sound weird but I held the USB in the phone port in an angle, luckily the removable drive came up.
Click to expand...
Click to collapse
Sounds like you have a bad connector on your phone.
obsanity said:
Sounds like you have a bad connector on your phone.
Click to expand...
Click to collapse
Yeah I think so.
All -
Okay, USB Mass Storage mode, what about it?
My Galaxy Note 5.3 with ICS has it. My Galaxy S3 with ICS does not have it.
I've been Googling for hours, and getting nowhere. The Samsung website says the N8000 has "USB Mass Storage Mode". But two posters on XDA say that it does not.
What I like to do is keep my PC file directory synced to my Samsung device. On my old Galaxy Tab 7 Classic, I can just plug it in (USB Mass Storage Mode), and it mounts and works. I then use ROBOCOPY (Windows rsync wannabe) and it syncs up just fine, and very quickly. I've got it in a batch file, I just plug in, double-click the icon, and it goes.
On the S3, MTP mode, as everyone seems to already know, doesn't cut it at all. It can't detect dates or metadata, so it wants to re-copy everything, in very slow MTP mode. UGH!
Prior to the ICS update for my note 5.3, I just rooted and used Samba.
So my questions:
1. Can someone definitively confirm whether the GT-N8000 Galaxy Note 10.1 has true USB Mass Storage mode support, or not?
2. If not, do we think Samsung is going to add it, as they did with the Galaxy note 5.3?
3. If not, is Samba the right way to go here? Is there a better way?
4. I've heard that "Airdroid" might be good, but does it support syncing a la rsync or robocopy?
5. Does anyone have any thoughts on how to proceed?
Thank you all so much for your patience and guidance!
Glen
I can't get USB mass storage mode to work at all. I am on Windows 8 RTM.
justauser said:
I can't get USB mass storage mode to work at all. I am on Windows 8 RTM.
Click to expand...
Click to collapse
My Galaxy S2 has USB Mass Storage mode... and I'm very dissapointed that the Note 10.1 does not have USB Mass Storage mode. Why do they keep changing these file structures... its so inconsistent.
One of the reasons I jumped from Transformer Prime TF201 to the Note 10.1 is because I thought the file structure in the Note 10.1 is better sturctured, just like the S2.
Anyone has any work around this? I do not want to always remove my microSD card all the time.
glenbarney said:
All -
Okay, USB Mass Storage mode, what about it?
My Galaxy Note 5.3 with ICS has it. My Galaxy S3 with ICS does not have it.
I've been Googling for hours, and getting nowhere. The Samsung website says the N8000 has "USB Mass Storage Mode". But two posters on XDA say that it does not.
What I like to do is keep my PC file directory synced to my Samsung device. On my old Galaxy Tab 7 Classic, I can just plug it in (USB Mass Storage Mode), and it mounts and works. I then use ROBOCOPY (Windows rsync wannabe) and it syncs up just fine, and very quickly. I've got it in a batch file, I just plug in, double-click the icon, and it goes.
On the S3, MTP mode, as everyone seems to already know, doesn't cut it at all. It can't detect dates or metadata, so it wants to re-copy everything, in very slow MTP mode. UGH!
Prior to the ICS update for my note 5.3, I just rooted and used Samba.
So my questions:
1. Can someone definitively confirm whether the GT-N8000 Galaxy Note 10.1 has true USB Mass Storage mode support, or not?
2. If not, do we think Samsung is going to add it, as they did with the Galaxy note 5.3?
3. If not, is Samba the right way to go here? Is there a better way?
4. I've heard that "Airdroid" might be good, but does it support syncing a la rsync or robocopy?
5. Does anyone have any thoughts on how to proceed?
Thank you all so much for your patience and guidance!
Glen
Click to expand...
Click to collapse
In settings/developer options, select usb debugging. Then when you connect to pc you should get mass storage hookup
You just need the MTP drivers .........
On WinXP machines mostly You will have to download KIES , install it to get drivers installed but not run it, connect 10.1 via USB and voila You will have a folder showing "phone" and sdcard folder.
Now You can use the sdcard card as mass storage. Only when it comes to transfer of files not recognized by Android or the device it will ask You wether it should be copied , just click yes.
On most win7 pcs Sammy devices are recognized automatically as MTP ...........
Same issue here , and for windows 8 i can't get the right drivers for it , the pc can't recognize the device in case i installed last version of Samsung Kies
The Note 10.1 uses MTP like the S3. I used this -> http://forum.xda-developers.com/showthread.php?t=1711009 on my Note 10.1 and it lets me mount the external micro SD card when I plug it into my Windows 7 computer. You have to be rooted w/ busybox installed. It should work for the S3 also, since that is what it was made for.
Good luck!
go to settings...
I'm running ICS 4.0.4 on galaxy note which runs MTP mode by default.
Usb mass storage mode can be enabled from settings-> wireless and network (more) -> usb utilities... turn on mass storage
There u r... hope it helps
is there a mod for the note 10.1 for ums?
Bump for an old question -
Is there a working solution for USB mass storage mode that works well with our note yet ?
aalupatti said:
Bump for an old question -
Is there a working solution for USB mass storage mode that works well with our note yet ?
Click to expand...
Click to collapse
help me please
how i can do recovery my deleted photo's ??
i cant connect my tablet to PC via mass storage
N8000
ehsan102 said:
help me please
how i can do recovery my deleted photo's ??
i cant connect my tablet to PC via mass storage
N8000
Click to expand...
Click to collapse
there are few apps in the market that i have seen that can do it.
Also there are windows applications that can do it too..
Dont remember anything over my head, but i am sure search will give you results..
I have done once in the past... It was along toiling process but eventually got many of them back.
aalupatti said:
there are few apps in the market that i have seen that can do it.
Also there are windows applications that can do it too..
Dont remember anything over my head, but i am sure search will give you results..
I have done once in the past... It was along toiling process but eventually got many of them back.
Click to expand...
Click to collapse
i tested all apps
but dosnt work again
ehsan102 said:
i tested all apps
but dosnt work again
Click to expand...
Click to collapse
Try mounting the internal sd a card in windows or mac and try using a mac or windows application.
http://www.zdnet.com/blog/digitalcameras/how-to-recover-deleted-photos-from-your-sd-card/1102
aalupatti said:
Try mounting the internal sd a card in windows or mac and try using a mac or windows application.
http://www.zdnet.com/blog/digitalcameras/how-to-recover-deleted-photos-from-your-sd-card/1102
Click to expand...
Click to collapse
thanks my friend
but that above link was for deleted photo and for not portable device
do You know a software windows for recovery file for portable device ?
ehsan102 said:
thanks my friend
but that above link was for deleted photo and for not portable device
do You know a software windows for recovery file for portable device ?
Click to expand...
Click to collapse
If you are able to mount the internal sd as card in your pc then you should be able to do it, since it would be acting like any other hard drive
I dont think this is possible with stock firmware.. but if you are able to install an asop rom like CM then you might have option to do it by using some app like ums mass storage enabler or so..
aalupatti said:
If you are able to mount the internal sd as card in your pc then you should be able to do it, since it would be acting like any other hard drive
I dont think this is possible with stock firmware.. but if you are able to install an asop rom like CM then you might have option to do it by using some app like ums mass storage enabler or so..
Click to expand...
Click to collapse
see the attach image
im using a custom ROM
but UMS donsnt work with any apps
do you know apps for recovery photo for android ?
ehsan102 said:
see the attach image
im using a custom ROM
but UMS donsnt work with any apps
do you know apps for recovery photo for android ?
Click to expand...
Click to collapse
By stock i meant , stock and stock based roms...
You will need an asop based rom
aalupatti said:
By stock i meant , stock and stock based roms...
You will need an asop based rom
Click to expand...
Click to collapse
Please offer to me a ASOP for n8000
thanks so much
ehsan102 said:
Please offer to me a ASOP for n8000
thanks so much
Click to expand...
Click to collapse
try pacman or cm or revolt..
Hello friends, I am facing a problem with USB Mass storage. Please find the case as below.
Previously when I used to connect my phone with my laptop, it used to show a pop-up notification on either I wish to enable USB mass storage mode or just wish to have my phone on charging only. USB debugging was also working like a charm during those days.
Now, from last two days (suddenly) none of the computers (i have tried on almost 10 different laptops) is recognizing my phone. Though this is the problem, it gets charged over USB without any problems.
Could someone of you please help with your expert knowledge??? I have tried downloading certain applications from Play Store also but no luck at all.
In furtherance to this, please note that I clicked on "format/emmc" while installing one of the custom ROMs through CWM recovery before two days and i suspect that this could have caused a problem.
Please help.
rajenpurohit said:
Hello friends, I am facing a problem with USB Mass storage. Please find the case as below.
Previously when I used to connect my phone with my laptop, it used to show a pop-up notification on either I wish to enable USB mass storage mode or just wish to have my phone on charging only. USB debugging was also working like a charm during those days.
Now, from last two days (suddenly) none of the computers (i have tried on almost 10 different laptops) is recognizing my phone. Though this is the problem, it gets charged over USB without any problems.
Could someone of you please help with your expert knowledge??? I have tried downloading certain applications from Play Store also but no luck at all.
In furtherance to this, please note that I clicked on "format/emmc" while installing one of the custom ROMs through CWM recovery before two days and i suspect that this could have caused a problem.
Please help.
Click to expand...
Click to collapse
Buddy,
Formatting EMMC is just like formatting SD card and EMMC is Internal SD card.
Do one thing backup all your data and then reboot in recovery and there you will find the options:-
Mount & Storage --> Mount USB Storage.
First connect your phone to USB and to the laptop then do the above said if its connected then its working and you only have to clear the defaults of the USB application.
If its not working then try other rom with proper guidance of flashing given by the OP.
Hit Thanks Instead of Saying It.....