[Q] flash Newest cellular radio 1.08.01.0111 - EVO Shift 4G Q&A, Help & Troubleshooting

here is a question.
how do you flash Newest cellular radio 1.08.01.0111 when your volume up button does not work at all?

Does your volume down work? If you're just talking about navigating the bootloader menu then you're fine. When you press down at the last menu item it cycles back to the top.
Sent from my PG06100 using xda app-developers app

rchris494 said:
here is a question.
how do you flash Newest cellular radio 1.08.01.0111 when your volume up button does not work at all?
Click to expand...
Click to collapse
What you want is HERE. Just be sure and Read the Instructions. There is also a video .

problem is
never mind i got it...
fastboot flash radio radio.img

rchris494 said:
never mind i got it...
fastboot flash radio radio.img
Click to expand...
Click to collapse
You don't need to send fastboot commands you just load PG06IMG.zip on the root of your sdcard and boot into bootloader.
Sent from my HTC Evo Shift using xda app-developers app

rchris494 said:
never mind i got it...
fastboot flash radio radio.img
Click to expand...
Click to collapse
Fastboot Flash . Why didn't you just.... NVM . Glad you got it.

the problem was. i could not confirm i wanted to apply the update. when you place it on the SD card. boot into the bootloader it reads the PG06IMG.zip, but it asks do you want to do this update. volume up for yes. i could not do a volume up for the yes part.

Is your volume button broken ?

That would drive me nuts! If that happened to me I would ruu and send the phone in...
Sent from my Nexus 7 using xda premium

yes, broken on the board. so it blows trying to use the phone... the ****tards at sprint where suppose to call me over a week ago with a new replacement phone. still no call. i am about to go to another sprint store and have them give me a new phone...

You could try calling Sprint directly over the phone. Sometimes ( Not always ) you get better results that way.

Related

Edge slow defective?

Is it just my device or is it T-Mobile on edge this device is super slow loading web pages. My signal strength is always bouncing about but usually its -85dBm 15asu. Should I take the device in or am I just thinking to much. I just got the replacement.
Sent from my Nexus S using XDA App
Did you try the new radio introduced in 2.3.3?
Nope does it work with cm7? Can you link me to it?
Sent from my Nexus S using XDA App
Darrien13 said:
Nope does it work with cm7? Can you link me to it?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=11661588&postcount=2596
bootloader.img and radio.img must be in your sdk\tools folder.
Boot into bootloader/fastboot mode
To flash the radio, use the fastboot command:
fastboot flash radio radio.img
select "reboot bootloader" and you should see the new version of the radio
To flash the bootloader:
fastboot flash bootloader bootloader.img
select "reboot bootloader" and you should see the new version of the bootloader
The new version numbers:
radio I9020XXKB1
bootloader I9020XXKA3
The versions that came with my phone:
radio I9020XXJK8
bootloader I9020XXJK1
Click to expand...
Click to collapse
also. if you haven't make sure you wipe dalvik/factory/cache to see if it would fix it.
its just difficult whether or not to say if your device is defective because you flashed a custom rom.
was it like this when you were on stock?
try flashing netarchy's 1.2.5 cm7 compatiable kernel as well
- Incorporate many updates from the newer 2.3.3 kernel sources,
including wifi driver updates, touchscreen updates, drivers for
future SLCD nexus-s variants, and more
Click to expand...
Click to collapse
If I wanted to would I be able to go back to the old radio
Sent from my Nexus S using XDA App
Darrien13 said:
If I wanted to would I be able to go back to the old radio
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
you can but there is no fastboot for the old radio available. it might be in the 2.3.2 OTA and you can pick it out from there but im not sure if its there since there wasn't a radio change in 2.3.2.
There wouldn't really be a reason for me to go back though right? Also I would still be able to flash, things from the bootloader?
Sent from my Nexus S using XDA App
Darrien13 said:
There wouldn't really be a reason for me to go back though right? Also I would still be able to flash, things from the bootloader?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
yes. flashing the updated bootloader is optional, but thats up to you. im not responsible for any bricks, i would just update both of them.
both of those two files are extracted from the 2.3.3 OTA.
there has been a great number of feedback that says that this radio definitely helps.
to figure out if your device is defective or not (it probably isnt).. return back to stock and see how it is. it could be based on your location since you are in a EDGE only area.
Thanks for your help. I put my sim in my G1 and it was even slower so I don't think it's my device
Edit:it was just like this when I restored back to stock
Sent from my Nexus S using XDA App
Darrien13 said:
Thanks for your help. I put my sim in my G1 and it was even slower so I don't think it's my device
Edit:it was just like this when I restored back to stock
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
It's most likely your area then. If you could get a backup of the old radio, you could try the new radio and see which one is better performance.

Flash radio w/o a pc?

Ok guys. I was wanting to flash a radio onto my inspire to run with virtuous Unity 2.35. I asked around here & I was told NOT to flash a radio w/o a pc using bootloader & was also told it was perfectly safe. Even caused an argument between the two. So, is it safe to flash a radio w/o a pc & adb or not? Hoping not to start another argument. Ha! Thanks all! :')
Sent from my Inspire 4G using XDA Premium App
Yes. It has to be in a flashable .zip that's titled exactly PD98IMG.zip, placed on the root(not in a folder) of the sd and done from HBOOT(Volume Down+Power buttons from being off).
This is the preferred method but don't forget the obligatory "check the md5" after it has been placed on the sd before the flash attempt. ManD5 is a good app to do this w/ and can be dl'ed from Market.
Tx
Yessir, I've got the manD5 app. I'd never flash anything anymore w/o checking that. Although I did my 1st few flashes starting out. And had problems, imagine that! Thanks for the reply. I've never flashed a radio before but that's what I've always heard. Now what about the RIL? Sometimes I hear bout both of em together & sometimes not...
Sent from my Inspire 4G using XDA Premium App
Safest way is straight from the phone:
Download a PD98IMG.zip from the radio thread and place in the root directory (not in a folder) of your SD card.
Verify the md5 (open Terminal Emulator, type "md5sum /sdcard/PD98IMG.zip").
Reboot into Bootloader, and apply the new radio.
Reboot phone and enjoy!
Flash radio, boot, reboot to CWM and flash the ril from there. You will possibly have undesirable battery/reception...at first. Wait at least 48hrs before making any changes as the radio/ril seems to have a settling period before you'll see optimal/realistic results. I know that sounds odd but it's how it works.
Ok, sweet. I've always kept terminal emmulator on my phone in case i ever need it but never have. So that's it, put it in the root of sd, type that in emmulator & then HBOOT from there? How come ur the first one tellin me bout doing it thru emmulator? Thanks so much for the input
Sent from my Inspire 4G using XDA Premium App
Sent from my Inspire 4G using XDA Premium App
Yea, I've heard bout em havin kind of a "settling" period
Sent from my Inspire 4G using XDA Premium App
HTCinspiration said:
Ok, sweet. I've always kept terminal emmulator on my phone in case i ever need it but never have. So that's it, put it in the root of sd, type that in emmulator & then HBOOT from there? How come ur the first one tellin me bout doing it thru emmulator? Thanks so much for the input
Sent from my Inspire 4G using XDA Premium App
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
He's not lazy like me.
Oh, right. Ha! :'D So does the ril come with the zip?
Sent from my Inspire 4G using XDA Premium App
Oh wait. Nevermind. I see ril doesn't come in the zip. So when I download this, I should be downloading a radio AND an ril? Verify MD5, flash radio, boot, then reboot back into CWMR & flash the RIL? Do I got that right?
Sent from my Inspire 4G using XDA Premium App
Hmmm, maybe I should just have my fun flashing roms & stick with the radio I got before I jack somethin up. Hehe, Thanks guys! Y'all are awesome
Sent from my Inspire 4G using XDA Premium App
HTCinspiration said:
Oh wait. Nevermind. I see ril doesn't come in the zip. So when I download this, I should be downloading a radio AND an ril? Verify MD5, flash radio, boot, then reboot back into CWMR & flash the RIL? Do I got that right?
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
If you still want to flash a different radio and RIL, then You've pretty much got it down pat. Yes, download both the radio and the matching RIL for that radio. Verify MD5's for both the radio zip and the RIL zip once they're on the root of your sd card. If you have good matches, you're all set to begin. Don't forget to flash the radio from HBOOT (power down the phone, then power back up by holding Vol-down + Power, then let off Power while still holding Vol-down for an extra second or two and let off), HBOOT will find the PD98IMG.zip and when prompted to upgrade, press Vol-up to accept and let it do its thing. The radio will flash and you'll reboot the phone. Once you boot back up, reboot to Recovery, then mount /system and flash the RIL. After you flash the RIL, reboot the phone and you're done.
EDIT: I always recommend that once you flash any file that is in PD98IMG.zip format, don't forget to either rename the file if you're keeping it on your sd card, or just simply delete it. The reason for this is in the event that things go south and you need to get back into HBOOT, you won't have a forgotten-about PD98IMG.zip file trying to apply when you're trying to cure a bootloop
Right on, u da man Dyne! That's what I was needin. The whole process. Now I'm comfortable doing it. Thanks alot man. Fixin to download em now! :') I'll be sure to "thank" u when I'm not on the app :')
Sent from my Inspire 4G using XDA Premium App
HTCinspiration said:
Right on, u da man Dyne! That's what I was needin. The whole process. Now I'm comfortable doing it. Thanks alot man. Fixin to download em now! :') I'll be sure to "thank" u when I'm not on the app :')
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
No problem I remember the first time I flashed a radio...... kept thinking I was going to blow something up, lol. As long as your MD5's match up, (just like prior to flashing anything), then half the battle is already won. Just don't forget to let your radio and RIL combo "settle in" for about a day or two before determining if you're getting data speeds that are to your liking

[DEV][WIP][11/29] Evo Design 4g Clockwork Mod Recovery 5.0.2.6

Clockwork Mod Recovery 5.0.2.6
for the Evo Design 4g
don't flash unless you know what you are doing. experienced users only
Seeing as how I still have not recieved my Design in the mail and am still stuck with this Motorola Photon I need people to test the recoveries I compile!
You need your bootloader unlocked you can do this with my HTC Super Tool
Extract the rar into your C: folder so you will be looking at C:\htcsupertool
Download recovery image HERE
Unzip and place recovery.img in your htcsupertool/root folder!
Reboot your phone into fastboot mode, open cmd and type:
cd /htcsupertool/root
fastboot flash recovery recovery.img
fastboot reboot
NOW! SINCE YOU ARE GUINEA PIG YOU BREAK YOUR PHONE YOUR FAULT NOT MINE!
Feel free to donate/thanks or both )
Here is 2fast4u88's port, it's worth a shot
2fast4u88 said:
Lol I know what you mean
Ok I am pretty busy this weekend, how ever below is a few files for you guys. I know some doesn't belong here but since I nabbed them I figured I would throw them in the post also. Now since I am not familiar with the process of flash recovery with the htc unlock. If someone would be kind enough to post the commands, it would save me some time. How ever be warned this does not have the wimax stuff in it. As it has been a good while since I played with a shift 4g. In turn I almost forgot all about the wimax stuff.
Any way here goes.
Stock Recovery: http://dl.dropbox.com/u/24065431/Kindom_Stock.img
Cwm Recovery ( Not sure of the version right off but synced sometime last week): http://dl.dropbox.com/u/24065431/kingdom-testing_recovery.img
Stock Radio (Not sure of version, but is from the ruu for you guys): http://dl.dropbox.com/u/24065431/radio.img
Then for kicks h-boot 1.22:
http://dl.dropbox.com/u/24065431/hboot_1.22.0000.img
I have no idea if it will work, but don't see why it won't at least boot. Since I don't know what issues you guys had to begin with. Not sure what the recovery may have issue wise. Let me know if it boots and if keys are mapped correct. Functions you can test though be warned to do so at your own risk.
Click to expand...
Click to collapse
Sent from my MB855 using xda premium
Useful links:
Stock RUU: http://www.filefactory.com/file/cd4..._2.60_0708_PRL51079_release_209668_signed.exe
@piaa_nissan's find give him a thx
RESERVED
Reserved #2
Updated and fixed link lol
Pushed to phone successfully but it will not boot into recovery, just stays on the white HTC screen.
Us out the same like when you flash the evo one threw rom manager?
Sent from my MoPho using XDA-Premium
Exactly like that
Hrmm well that sucks I will recompile
Sent from my MoPho using XDA-Premium
It's all good, I'll keep testing as needed
piaa_nissan said:
It's all good, I'll keep testing as needed
Click to expand...
Click to collapse
Thank you sir.
Updated someone try and report back geez I need my design already
Sent from my MoPho using XDA-Premium
I'm wide awake and willing, but I'm at the hospital with my mom. She was just recently diagnosed with copd, and keeps having issues with it. I'll give it a go when I get home in the morning. I downloaded it already to my phone, so I'll plug and play first chance I get. Second times the charm.
Sent from my *rooted* EVO Design using xda premium app
Try fastboot boot recovery.img as well
Sent from my MoPho using XDA-Premium
I tried it still want load only white htc screen......
frigid said:
Try fastboot boot recovery.img as well
Sent from my MoPho using XDA-Premium
Click to expand...
Click to collapse
I tried that... Also tried adb reboot recovery. All gets white Screen...
Hrmm I will try another build
Sent from my MoPho using XDA-Premium
biggdaddeee said:
I tried it still want load only white htc screen......
Click to expand...
Click to collapse
This is where I am at now too. How do I fix this?
Skellinator said:
This is where I am at now too. How do I fix this?
Click to expand...
Click to collapse
There is currently no fix we are awaiting another build and that should work. We must wait patiently.
Sent from my ROOTED HTC Evo Design 4G.
El Ha$on said:
There is currently no fix we are awaiting another build and that should work. We must wait patiently.
Sent from my ROOTED HTC Evo Design 4G.
Click to expand...
Click to collapse
Well, I guess I should have known better that to mess with it. Is there a way to relock the bootloader so I can take it back to the store? I can't get my pc to see the device.
Skellinator said:
Well, I guess I should have known better that to mess with it. Is there a way to relock the bootloader so I can take it back to the store? I can't get my pc to see the device.
Click to expand...
Click to collapse
I am not sure but frigid has taken his device back to Sprint with bootloader unlocked and have replaced it for him. But you should still be able to see your phone when you connect it to the pc. Try rebooting. Or maybe other things on the internet may help
Sent from my ROOTED HTC Evo Design 4G.

[Q] booting problem, need help

hi, I just bought a used htc inspire 4g, the guy how sold it to me told me that I just need it to do a hard rest and the phone will be good to go
I did the hard reset and the phone stays on th htc withe screen, a need to remove the batery for the phone to turn of
the phone does star up but its locked, i have the emei unlock code but wen I enter the code the phone says succssesfully unlock but wen the phone restarts its stays on the htc withe screen
I´ve been browsing arround and I thing it has a corrupt rom or something like that
I dont have the memory with any of the roms or anything like that
can I restore my phone to the original settings or how can I fix the problem?
thanks!
Well, I'm at a loss but let's see where this goes until someone else who knows joins the thread
While the phone is off press and hold the volume down button and while holding it down press the power button.
Wanna see if you get a few options there or if it boots normally.
Sent from a dream.
Teichopsia said:
Well, I'm at a loss but let's see where this goes until someone else who knows joins the thread
While the phone is off press and hold the volume down button and while holding it down press the power button.
Wanna see if you get a few options there or if it boots normally.
Sent from a dream.
Click to expand...
Click to collapse
on the top of the phone with green leters it says
ACE PVT SHIP s-on RL
HBOOT- (some numbers)
MICRO- (some numbers)
eMMboot
(date)
HBOOT
and the options are
fast boot
recovery
factory reset
simlock image crc
OK, download the att ruu, and from that boot screen.(where it shows pvt son,hboot etc) plug in your phone to PC and run the orogram. Links to the ruu can be found in the sticky above(stuck in boot/white screen read this) you'll want the last section
Sent from my Inspire 4G using XDA
marsdta said:
OK, download the att ruu, and from that boot screen.(where it shows pvt son,hboot etc) plug in your phone to PC and run the orogram. Links to the ruu can be found in the sticky above(stuck in boot/white screen read this) you'll want the last section
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
do I need to do the alternate-flashing or RUU?
how do I know withs one to download
the AT&T Inspire 4G - Froyo
or
AT&T Inspire 4G - Gingerbread
edit: I thing its the AT&T Inspire 4G - Gingerbread because the radio numbers,
Its the same. The alternate method is flashing the ruu. And use the gb one.
Sent from my Inspire 4G using XDA
marsdta said:
OK, download the att ruu, and from that boot screen.(where it shows pvt son,hboot etc) plug in your phone to PC and run the orogram. Links to the ruu can be found in the sticky above(stuck in boot/white screen read this) you'll want the last section
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
I didn't know about that one.
That's what I love about this place. Everyday one learns something new and in general, everyone is helpful.
Sent from a dream.
marsdta said:
Its the same. The alternate method is flashing the ruu. And use the gb one.
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
it didnt work! I did tha arternate mothod and the phone does the same!
do you have anymore ideas?
thanks!
its 2 am here im going to bed
keops22 said:
it didnt work! I did tha arternate mothod and the phone does the same!
do you have anymore ideas?
thanks!
its 2 am here im going to bed
Click to expand...
Click to collapse
Go to the HTC site, and in the support section download the GB update file (.exe). Boot into hboot (power + volume down) and then choose fastboot (you will see fastboot usb in red).
Then, let it work....that should flash the GB stock rom.
Just 1 piece of advice...NEVER INSTALL A FROYO RUU if your device was shipped with GB or you are not sure with what OS it came with....you will mess it further....
glevitan said:
Go to the HTC site, and in the support section download the GB update file (.exe). Boot into hboot (power + volume down) and then choose fastboot (you will see fastboot usb in red).
Then, let it work....that should flash the GB stock rom.
Just 1 piece of advice...NEVER INSTALL A FROYO RUU if your device was shipped with GB or you are not sure with what OS it came with....you will mess it further....
Click to expand...
Click to collapse
a cant find the update file on the htc site! I´ve been browsing for a wile a y cant findet, can you sen me the like?
edit: find it! I think its the same .exe program from the post form marsdta, I will download it anyway and si if it fixes the problem
AIts the same as what I linked too earlier.
If ruu didn't work it doesn't look to good. You can try flashing the pd98img and maybe have better luck with that
Sent from my Inspire 4G using XDA
glevitan said:
Go to the HTC site, and in the support section download the GB update file (.exe). Boot into hboot (power + volume down) and then choose fastboot (you will see fastboot usb in red).
Then, let it work....that should flash the GB stock rom.
Just 1 piece of advice...NEVER INSTALL A FROYO RUU if your device was shipped with GB or you are not sure with what OS it came with....you will mess it further....
Click to expand...
Click to collapse
it dint work neither, it says unpdate successesfully but en the phone boots it stays on the htc withe screen and a need to remove the batery for the phone to boot but wen I enter the unlock code the phone reboots and stays on the with screen
i`ve noticed that it only stays on the withe screen wen the phone es rebooted but if I torn it of or remove the batery it will boot fine
anyone has anoter idea?
marsdta said:
AIts the same as what I linked too earlier.
If ruu didn't work it doesn't look to good. You can try flashing the pd98img and maybe have better luck with that
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
can you link me a guide or were can i find ho to do that?
keops22 said:
can you link me a guide or were can i find ho to do that?
Click to expand...
Click to collapse
Sounds like the volume rocker might be broken
Sent from my Inspire 4G using XDA
glevitan said:
Sounds like the volume rocker might be broken
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
can it be fixed?
keops22 said:
can it be fixed?
Click to expand...
Click to collapse
I actually don't know how to....there are a couple of tutorials in the forum...
Anyway, I am not sure that is broken but might explain what is going on!!
keops22 said:
can you link me a guide or were can i find ho to do that?
Click to expand...
Click to collapse
The guide is also in what I linked earlier(stuck in boot etc) but it sounds like its a hardware issue
Sent from my Inspire 4G using XDA
marsdta said:
The guide is also in what I linked earlier(stuck in boot etc) but it sounds like its a hardware issue
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
I am going to try it out, and see if it works
I just hope its not a hardware issue!!
marsdta said:
AIts the same as what I linked too earlier.
If ruu didn't work it doesn't look to good. You can try flashing the pd98img and maybe have better luck with that
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
It didn't wort! The phone does the same!
Thanks for your help, hope someone has another idea
edit: wen I was doing the pd98img update on the screen on my phone were all the files were being updated some files
didnt update, it said
(8) TP - bypassed
(9) TP - bypassed
(10) TP - bypassed
all the other ones updated fine
is that normal in the update process?

Flashing radio.img to atrix 2.

I'm using a ATT atrix 2 MB865 ics leaked. I like to ask if somebody tried already to flash radio.img on this phone to get better reception ang good signal. Thanks
Sent from my MB865 using xda premium
ryuben2k said:
I'm using a ATT atrix 2 MB865 ics leaked. I like to ask if somebody tried already to flash radio.img on this phone to get better reception ang good signal. Thanks
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Atrix 2 has a locked bootloader mate. No flashing radios/kernels or anything of the sort with a locked down bootloader. Impossible to do.
Welcome to Motorola. :silly:
Ok, thanks for the answer. Wish that when we receive the OTA ICS they fix the radio or unlocked the bootloader.
Sent from my MB865 using xda premium
Yeah unfortunately, I don't see that happening anytime soon.
Sent from my SAMSUNG-SGH-I727 using xda premium
Fall of Enosis said:
Atrix 2 has a locked bootloader mate. No flashing radios/kernels or anything of the sort with a locked down bootloader. Impossible to do.
Welcome to Motorola. :silly:
Click to expand...
Click to collapse
Not doable sir, even using moto-fasboot flash radio radio.img" adb command??
Thanks
Guys you can flash a radio image with moto-fastboot just fine, but I will tell you that you can ONLY use the radio images that come with the fxz, you will ONLY flash the radio file from there. You unfortunately do not have too may choices though, only the radio from 2.3.5, or 2.3.6, or 4.04 since those are the ONLY FXZs that we have. What you can not do is make your own radio files and flash them, like on other phones. If you are in another part of the world with a US AT&T phone and you flash another region's radio files, your phone will likely have no signal, so be careful to ONLY use radios meant for your version and region.
jimbridgman said:
Guys you can flash a radio image with moto-fastboot just fine, but I will tell you that you can ONLY use the radio images that come with the fxz, you will ONLY flash the radio file from there. You unfortunately do not have too may choices though, only the radio from 2.3.5, or 2.3.6, or 4.04 since those are the ONLY FXZs that we have. What you can not do is make your own radio files and flash them, like on other phones. If you are in another part of the world with a US AT&T phone and you flash another region's radio files, your phone will likely have no signal, so be careful to ONLY use radios meant for your version and region.
Click to expand...
Click to collapse
Thanks sir.
One question, is it doable if i flash radio.img from other atrix2 phone that working well on signal?
I'll try to backup the radio from other phone with good signal then take out to my phone with fastboot.
Thanks again...
handyman08 said:
Thanks sir.
One question, is it doable if i flash radio.img from other atrix2 phone that working well on signal?
I'll try to backup the radio from other phone with good signal then take out to my phone with fastboot.
Thanks again...
Click to expand...
Click to collapse
No, that will likely cause a bootloop/softbrick. You must use official radio.img files as they are signed by moto. You can find out what firmware the other a2 is running and try and download that fxz and flash just that radio.img file so that it is the same as the other atrix2. No guarantees if that phone is a different version say international vs ATT, though.
i flashed radio of indian A2 ICS on ATT hardware .....
but didnt find any improvement in signal (which was affecting my 4G->Edge shifting in auto mode)
Sir, the other phone i'd already ota upgrade to ics stock. 6.7.2-226-EDICS-8
Baseband ver.
2012-06-27 14:27 Off.Bld
LUD_EDISON_R1D7_PATCH_47_120627_1241
crh1090280_M570_PC_CARD_RAIN
Do you have flashable zip radio version of 2.3.5 or 2.3.6 or 4.0.4?
Thanks
Sent from my DROID BIONIC using Tapatalk
Hope someone still reads this thread. I have an Atrix 2 but I think the last owner try a lot of times a wrong unlock code, I got the correct code but it didnt work, a solution for this kind of problem in a Atrix 1 was to reflash the radio.
Where can I get the official radio files for this device? maybe can post the step by step guide to do that?
Im on official ICS.
Thanks for the help.
janocool said:
Hope someone still reads this thread. I have an Atrix 2 but I think the last owner try a lot of times a wrong unlock code, I got the correct code but it didnt work, a solution for this kind of problem in a Atrix 1 was to reflash the radio.
Where can I get the official radio files for this device? maybe can post the step by step guide to do that?
Im on official ICS.
Thanks for the help.
Click to expand...
Click to collapse
fist you need to go http://forum.xda-developers.com/showthread.php?t=1138092 download moto fastboot win 32 (the one at the very bottom) unzip it to the root of your hard drive ( C:/ ) then put the attached radio image inside that folder,power off your phone and turn it on by pressing power button and vol down keys, this will take you into fastboot, plug your phone to your pc, open a comand prompt inside moto-fastboot folder (right click while holding shift) and type
moto-fastboot flash radio radio.img
this will take like 2 secs then type exit, unplug your phone, pull battery, turn it on normally, there will be a dead android with a triangle comming out of his chest, press power button and it will power on normally
remember to have updated motorola drvers installed (google arround on a how to) , and use one of the back panel usb ports
http://db.tt/vTDc6Ibh <----radio image
Sent from the gray stuff inside my skull
Thanks will try tomorrow, hope it works
---------- Post added at 04:37 AM ---------- Previous post was at 04:26 AM ----------
demonoid phenomenom said:
fist you need to go http://forum.xda-developers.com/showthread.php?t=1138092 download moto fastboot win 32 (the one at the very bottom) unzip it to the root of your hard drive ( C:/ ) then put the attached radio image inside that folder,power off your phone and turn it on by pressing power button and vol down keys, this will take you into fastboot, plug your phone to your pc, open a comand prompt inside moto-fastboot folder (right click while holding shift) and type
moto-fastboot flash radio radio.img
this will take like 2 secs then type exit, unplug your phone, pull battery, turn it on normally, there will be a dead android with a triangle comming out of his chest, press power button and it will power on normally
remember to have updated motorola drvers installed (google arround on a how to) , and use one of the back panel usb ports
http://db.tt/vTDc6Ibh <----radio image
Sent from the gray stuff inside my skull
Click to expand...
Click to collapse
Just to be sure this radio will work in the AT&T version of the atrix 2 ?
janocool said:
Thanks will try tomorrow, hope it works
---------- Post added at 04:37 AM ---------- Previous post was at 04:26 AM ----------
Just to be sure this radio will work in the AT&T version of the atrix 2 ?
Click to expand...
Click to collapse
yes it will work , I've just flashed GB retail claro latam radio, i also have an at&t a2 i live in chile
Sent from the gray stuff inside my skull
demonoid phenomenom said:
yes it will work , I've just flashed GB retail claro latam radio, i also have an at&t a2 i live in chile
Sent from the gray stuff inside my skull
Click to expand...
Click to collapse
I flash the radio use my unlock code and no luck with it, maybe other radio file to try? or a link for a list of radios that can I use? thanks.
personally I don't believe that changing radios would help, if it doesn't helped the first time it wouldn't work on further attempts , but if it does http://db.tt/7cnJSKpT those are numerous radio images from several ics retail firmwares (thanks firmware team) if that don't work i don't know what can you do
Sent from the gray stuff inside my skull
demonoid phenomenom said:
personally I don't believe that changing radios would help, if it doesn't helped the first time it wouldn't work on further attempts , but if it does http://db.tt/7cnJSKpT those are numerous radio images from several ics retail firmwares (thanks firmware team) if that don't work i don't know what can you do
Sent from the gray stuff inside my skull
Click to expand...
Click to collapse
Thanks bro for you concern actually I call today to AT&T just to be sure that I have the correct code, they told me that my phone doesn't have a unlock code and it will just work on AT&T , so I think I get a really nice media player.
janocool said:
Thanks bro for you concern actually I call today to AT&T just to be sure that I have the correct code, they told me that my phone doesn't have a unlock code and it will just work on AT&T , so I think I get a really nice media player.
Click to expand...
Click to collapse
there are internet sites that sells unlocking codes, maybe a last attempt? google arround for it
Sent from the gray stuff inside my skull
demonoid phenomenom said:
there are internet sites that sells unlocking codes, maybe a last attempt? google arround for it
Sent from the gray stuff inside my skull
Click to expand...
Click to collapse
Already ask 3 sellers in eBay and they will provide me the same code one guy told me that I have a corrupted sim lock data. Don't know what it means they mention that the only solution is using a cable no more detail
Ok so when we fxz does it reflash radio.img thru rsd light or do we have to tell it thru fast boot commands. I get random reboots when it says that the radio has no signal. Lol. Driving me nuts. After it gets. Done booting it will be fine as long as it says radio is working. But it will reboot until it does.
Sent from my MB865 using xda premium

Categories

Resources