Helloo guys; please help me i upgraded to ICS and tried to go back to GB but when i did it didn't work stucked at the (touch the android) screen doing a little search i saw that i have to flash another kernel also did it without success.
doing a little more search i found a guy wrote u have to uncheck auto-reboot, and F.reset time and check Repartition,and use a PIT file.
infourtunatlly i put the file from I9100G by mistake. the process was successful but when i shut the phone it didn't turn on again in any mode no download mode, no recovery mode, completely dead........
anyway when i tried to plug into PC it recognize something and make the PnP noise but after trying to search for a driver it says this usb device has malfunction that happened a couple of times and after that no recognition at all.
the phone keeps warm when the battery plugged in, i have tried all tricks of erease memory and everything.
will i have luck trying a usb jig? i ordered one but from the search i think i have a hard brick which the jig will not override ....
the jig will arrive after 2 weeks so do u recommend doing something??
please help guys am crying for this
i'm sorry
Lacrious said:
Helloo guys; please help me i upgraded to ICS and tried to go back to GB but when i did it didn't work stucked at the (touch the android) screen doing a little search i saw that i have to flash another kernel also did it without success.
doing a little more search i found a guy wrote u have to uncheck auto-reboot, and F.reset time and check Repartition,and use a PIT file.
infourtunatlly i put the file from I9100G by mistake. the process was successful but when i shut the phone it didn't turn on again in any mode no download mode, no recovery mode, completely dead........
anyway when i tried to plug into PC it recognize something and make the PnP noise but after trying to search for a driver it says this usb device has malfunction that happened a couple of times and after that no recognition at all.
the phone keeps warm when the battery plugged in, i have tried all tricks of erease memory and everything.
will i have luck trying a usb jig? i ordered one but from the search i think i have a hard brick which the jig will not override ....
the jig will arrive after 2 weeks so do u recommend doing something??
please help guys am crying for this
Click to expand...
Click to collapse
I'm sorry, I advise you to try the jig for 10 seconds or press the 4 spin battery and try to turn it on
Related
Hello friends .
I have installed -= [ROM-Leak][ODIN] Gingerbread 2.3.4 T959VUVKG4 =-
on my galaxy s 4g using ODIN 1.7 and everything was working fine .
Then i found another rom that i like and would like to change .
but now when i go into download mode by plugging usb cable on my phone after pressing vol up + vol down button . my com port does not show on ODIN and windows says - "USB DEVICE NOT RECOGNIZED"
This is very sad as i am not able to change roms
can any 1 help .
till now i have only used ODIN for roms , i am a little noob at cwm .
help would be appreciated .
thank you
It is redundant, but you have to uninstall ALL Samsung USB drivers, restart the PC, reinstall the USB drivers, do the download-mode on phone, plug it in, SHOULD pick up... IF NOT, do the above all over again. This is what I do when mine does this.. Sometimes it works right away, other times it takes a few reboots, but eventually the PC WILL install the "device" and Odin3 will pick it up.
i have already tried unistalling and reinstalling thrice . No help . Ive also tried 3 diff usb ports .
It is a pain, but this method was the only thing that worked for me.. it took some time.. and patience. Even went through this last-night while flashing from KC1 to KG4, and then to KH2... KG4 seems to be the trouble maker with the USB issue...
thanx . somehow the other download screen appered [ phone -->yellow -->pc ]
and i installed another rom . everything is ok now . thanx for the help
Glad to hear it worked out for you. Sounds like soft-bricking helped you out a bit in this case. They are usually nothing to really fear as long as you can get into either Download mode or that screen mode, ROMS Will always flash with Odin into either one.
MoToKrusheR said:
Glad to hear it worked out for you. Sounds like soft-bricking helped you out a bit in this case. They are usually nothing to really fear as long as you can get into either Download mode or that screen mode, ROMS Will always flash with Odin into either one.
Click to expand...
Click to collapse
oh ! ok . nice .
wonder why arent all roms made for odin ? :S
I also found out that some windows updates for windows 7 was causing a ruckus with recognizing sg4g and other phones. I am having this problem now. I will try the suggestion, although i've done it 10 times. But I need my phone, I have to make calls regarding my dad (just died and I cant afford to not have contact. TIA
did you fix it?
first of all it was working all good with jvu saurom port then out of curiosity i decided to go for jbparanoid,
after that everything is good but i decided to go back to gb(jvu saurom port) i cant seem to load it to red cwm after flashing the port of jvu,
so i tried formating /system/cache/data still no red nor regularbootup
stupidity strikes i decided to format boot :crying: there i got the samsung logo but wont even start to boot nor i cant access blue or red cwm :crying::crying:
now im on my laptop trying to go back to stock and Download mode it cant even show the option its just samsung logo and it cant even be recognized by my laptop tried uninstalling everything that relates to samsung and fresh install kies and samsung drivers but no luck tried heimdall/odin it doesnt go it cant even recognize my phone :crying::crying:
i need help im pretty close to darkness here :crying:
THANKS
btw my laptop is running windows7 64bit
Try pulling the battery then put battery in and hold volume up and volume down then plug in USB cable and see if it goes into download mode. If it doesn't the ONLY two things that will possibly work is a USB jig or getting a memeber who can JTAG it and recover it for you.
wawaweewa said:
first of all it was working all good with jvu saurom port then out of curiosity i decided to go for jbparanoid,
after that everything is good but i decided to go back to gb(jvu saurom port) i cant seem to load it to red cwm after flashing the port of jvu,
so i tried formating /system/cache/data still no red nor regularbootup
stupidity strikes i decided to format boot :crying: there i got the samsung logo but wont even start to boot nor i cant access blue or red cwm :crying::crying:
now im on my laptop trying to go back to stock and Download mode it cant even show the option its just samsung logo and it cant even be recognized by my laptop tried uninstalling everything that relates to samsung and fresh install kies and samsung drivers but no luck tried heimdall/odin it doesnt go it cant even recognize my phone :crying::crying:
i need help im pretty close to darkness here :crying:
THANKS
btw my laptop is running windows7 64bit
Click to expand...
Click to collapse
MrBooMY said:
Try pulling the battery then put battery in and hold volume up and volume down then plug in USB cable and see if it goes into download mode. If it doesn't the ONLY two things that will possibly work is a USB jig or getting a memeber who can JTAG it and recover it for you.
Click to expand...
Click to collapse
thank you for your reply
been trying the download mode more than ever its not going thru ill look into usb jig and my laptop wont recognize my laptop :crying:
Try download mode using a different USB port.
EXPERIMENT said:
Try download mode using a different USB port.
Click to expand...
Click to collapse
Did that sir a retractable one but no use
Sometimes it's just a matter of waiting and perseverance. Try disconnecting your phone from the computer, taking the battery out, leaving it for 10 mins. & then coming back and trying again.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Whizzpopper said:
Sometimes it's just a matter of waiting and perseverance. Try disconnecting your phone from the computer, taking the battery out, leaving it for 10 mins. & then coming back and trying again.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Ok thanks will try that im taking every advice i can get my other option is go back to at&t if not ill get jig online ill take out the battery right now. Sad thing about it my laptop nor pc wont recognize it tried a bunch of drivers and removed a bunch too
I cant make my laptop recognize my phone or my pc
wawaweewa said:
I cant make my laptop recognize my phone or my pc
Click to expand...
Click to collapse
do you get any kind of error message when you try to connect the phone.... I had a similar problem and had to redownload the drivers ..... then was able to get the computer to recgonize the phone... the other issue you might have is a bad USB cable.
jdsatyr said:
do you get any kind of error message when you try to connect the phone.... I had a similar problem and had to redownload the drivers ..... then was able to get the computer to recgonize the phone... the other issue you might have is a bad USB cable.
Click to expand...
Click to collapse
Its installing as unknown device and sometimes it cant read it
Oh well called at&t they'll send a new one with in a week
wawaweewa said:
Oh well called at&t they'll send a new one with in a week
Click to expand...
Click to collapse
Good that at&t send you new one bro, but mine before have a problem totally bricked samsung vibrant and my samsung infuse which has power button problem i send it to here http://mobiletechvideos.mybigcommerce.com/ is fast shipping and services are amazing, i can't complain to at&t since i bought phones from craiglists before.
xxxSuperserieSxxx said:
Good that at&t send you new one bro, but mine before have a problem totally bricked samsung vibrant and my samsung infuse which has power button problem i send it to here http://mobiletechvideos.mybigcommerce.com/ is fast shipping and services are amazing, i can't complain to at&t since i bought phones from craiglists before.
Click to expand...
Click to collapse
yeah im still in warranty so no questions about it they said well rreplace it asap so yeah..lesson learned
Got my new infuse but i think the screen of it (contrast) is kinda off ill look in to in
I have a TF101 SN60 - SBK1. I was trying today to root it to instal a stupid USB modem app and i bricked it.
Right now it is in recovery mode and i can`t get it out. Tried all the combination of the buttons and still doesn`t work.
I tried to reput the stock rom from Asus and i had success(2 times) but was still in recovery mode and after that i tried once more and it failled.. now i have 7 " !!!!! phone update failled !!!!" and i am very pissed and mad as i do not know what to do no more. I wasted 5 hours today trying to do something to it but i can`t no more. Please help me with some tips or maybe help me put it back to it`s normal state. Thank you.
Which recovery and version do you have installed, and how did you install it?
almost same issue
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
sriv2102 said:
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
Click to expand...
Click to collapse
Have you tried APX mode?
I would try another PC, or get a new charging cable. It is possible for the USB cable to charge but not work for USB. Happened to me.
So today, I tried to install TWRP onto a standard, 4.0.4 Samsung Stellar. Followed the instructions, went through Odin, and it failed with auth errors. Well, crap. Reboot the phone, get into there, and try to use GooManager to do it for me. I let it do the standard OpenBootloader or whatever, didn't work. So then I tried EZ-Unlocker. Unlocked just fine, until I turned off the phone. Try booting it, nothing happens; no vibration, no sound, no screen, nothing. I thought this was a dead battery (The battery was running at literally, 3% after I used EZ-Unlocker), so I plugged it in. No red light. Take out the battery, slap it back in. Same result, nothing happens to the phone. Well, crap. Try holding the power button again, nothing happens. Connect it to my computer and it reads it as some QUSB or whatever; look that up, download and installed a driver file for Qualcomm, and now Odin3Execution recognizes it, but Odin 3.07 doesn't. However, I still cannot use Odin to try flashing a new ROM onto it or anything because I cannot get into Odin mode. I was thinking of buying a USB jig to get it into Odin, but I want to confirm with someone else that this is a full hard-brick and not me being stupid.
tl;dr: Stellar doesn't boot at all; power button unresponsive, cannot get into recovery or download/odin mode; computer recognized it as QHSUSB_DLOAD, installed drivers to get it to be recognized as a Qualcomm HS-USB QDLoader 9008 at COM7. Very similar to http://forum.xda-developers.com/showthread.php?t=822939 but just a different phone.
edit: I found this: http://rootzwiki.com/topic/109153-howto-unbrick-a-bootloader-bricked-stellar/ but the download link times out. I'm willing to try this since it may solve the problem. Does anyone know where I can find a mirror of the download link?
edit2: I just sent a PM to invisiblek here on XDA.
edit3: And thanks to invisiblek, I managed to get it into download mode! Solved; if you want the stella-unbrick file, shoot me a PM and I'll upload it somewhere.
I an also looking for solution and need your help.
Sent from my SCH-R830 using XDA Free mobile app
Sch-i200 bricked download page required
hello
could you give the download link where I can find bricked soln. as such I bricked my stellar and I want to use it in India so I want to unlock it too.
Kindly help and hope to get back from you soon
Hope this is the right place to be asking this question
First timer so pls excuse if i miss out anything.
I was doing an ota firmware update to my t mobile Samsung note 2 (SGH-T889) using kies 3.1. My phone was stuck on 41 percent for about an hour so i disconnected the phone thinking that it will reboot and ask me to reconnect. Well since it didnt, its been stuck on this firmware encounter an issue please selcet recovery mode in kies and try again.
I hooked it back up and now in kies it just says connecting but nothing happens.
i tried putting my phone in download mode to see if itll connect to kies and still nothing. The phone wont allow me to get into recovery mode due to this issue. Im a mac user so i even downloaded wine to use odin i downloaded all samsung drivers needed for a connection and odin cant even detect my phone. Im not sure if usb debugging is on in my phone . I cant access nothing on my phone i tried many tricks on youtube looked at xda forms i even went into tmobile and they didnt kno what to do. Im using the factory usb, i tried diff ports and just cant seem to get a good connectiong between either programs. Please helps its been 3 days without a phone..thank you
Hi,
I see you've already asked about this in the appropriate section for your device.
http://forum.xda-developers.com/note-2-tmobile/help/note-2-stuck-firmware-encounter-issue-t3217172
That's awesome! :good:
As XDA Assist is here to help navigate the site, not for support... I'll close this thread since you already found your way.
Good luck!