Rogers APN settings not working?? - AT&T, Rogers HTC One X, Telstra One XL

i was using cleanrom 3.1 for a while, and everything was working fine. but i seen the new version (4.1) http://forum.xda-developers.com/showthread.php?t=1655011 and couldn't resist all the new features and mods lol.. thing is, now that i updated to 4.1 my LTE is no longer working, its just using 4G
ive tried the same settings i used before on cleanrom 3.1 and they don't seem to work. settings as seen here ===> http://dl.xda-developers.com/attach...166a897/4ffa16a7/1/1/2/3/8/6/9/Rogers_APN.txt
i flashed back to my old nandroid backup which was a stock rom and the LTE was working fine again. but when i flash to cleanrom 4.1 the LTE doesn't work, even after putting the APN settings in..
any help would be much appreciated, i need my LTE to work or there is no point lol, not worth having a custom rom if i don't get LTE speeds that i pay for
edit: nevermind.. it just started working musta been something on the rogers end of things. woot!

Related

[Q] Help! PLease!

I rooted my skyrocket and flashed CM7 Alpha Version 3 ROM.
I wasn't able to receive calls, or txt messages.
Also, does anyone know if I can uninstall ADW.Launcher From CM7? I want a pure google based ROM. I like Pure google, but dont wanna slap down the price for a unlocked nexus...
Can anyone guide me in the right direction?
Flash the new version alpha 4 with da_g new cm7 v4 kernel and that should solve your problem
Sent from my SAMSUNG-SGH-I727 using xda premium
I had to flash DaG's kernel even with the latest update to CM7. My WiFi wasn't working before I did.
You will also need to restore backed up APN settings for data and LTE to work. I tried entering them manually (as outlined in the OP for the ROM) and it didn't work.
There isn't a vanilla Android ROM for this phone yet, at least not to my knowledge. You could try making one I suppose, but that is no easy task (nor is it risk-free!).
Good luck!

Rogers i727r Rooting and Roms?

Last week I got the i727r from my work and was wondering if I have to be careful which roms I use. I am not on the rogers network but have unlocked it and using it with another network currently.
Am I ok installing at&t based roms in this case or do I have to be picky on what I install.
I have previous experience with rooting and installing roms, but seems like there might be some hickups.
Thanks in advance
From what I understand by reading the rogers based roms usually play nice with att but I don't know about the carrier your using.
Sent from my Xoom using xda premium
There are some minor differences make sure the rom says it will work with the rogers version of the phone.
If it's a work supplied phone you most likely should not be flashing roms on it as if you ever need to fall back to odin or if you brick it then that's not cool.
It's not I work phone I just work for a dealer so it's unlocked working with my current provider. I had no problems getting root working and tried a few roms just nothing seems to satisfy my geek yet for the i727.
Seems like most of the roms are debloated versions of the stock rom, but the stock rom works so well I am not unhappy with it.
I do understand the risks of rooting and roming I have been doing it since the HTC G1 (Oldschool android lol) just my first Samsung experience all I can say is WOW!
Thanks for the advice and the answers!
Keep the community rocking
If you flash att roms youll need to change your apn settings. And should flash red sonja rom
Debloated rogers rom is fine for now. I'm running the Go launcher with ICS theme and Roboto font and it is nice. We'll have to wait for new official roms to get some better 3rd party roms and that includes that Red rom.
silver03wrx said:
If you flash att roms youll need to change your apn settings. And should flash red sonja rom
Click to expand...
Click to collapse
I found red Sonja pretty Laggy actually
Which ROMs are recommended for a SGHi727r? I have recently acquired the cell (and love it) but the guy in the store says its sooo much more capable when it isn't stock. (with stock settings, the cell would last only half a day... until I got JuiceDefender, now it lasts a full day hehe)
I was wondering which ROMs you more experienced guys would suggest. (and that would be ROMs that do not increment the flash counter of course, still not sure of how this works, however I do know how to verify it) My phone was rooted by using SuperOneClick
Sent from my SGH-I727R using XDA App
Be carefull
just be really careful what roms you are using i almost brick my phone twice using a i727 rom not really compatible with the i727R
so if you are not good with computer and dont know how to restore kernel, original roms and cwm to do hard reset and clean cache (cause sometime the ok button in android 3e recovery is not working at all ) with odin you will be ****ed !
im still looking for a stable version so if anyone have a good one please keep us inform
You will never brick flashing any 727 roms as far as use they should all work with proper setup pay attention to what your doing and bam problem solved
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have tried almost every rom on here, and have only had problems with certain MIUI due to the recovery i use. For Battery i found Alien ICS had the best battery it can be found here http://forum.xda-developers.com/showthread.php?t=1608088
If you want to stay on ginger bread then i would recommend TPC found here http://forum.xda-developers.com/showthread.php?t=1357506
Now I know your not on rogers but if you need name display and want to use ICS you will have have to use an UCLE2 ROM/Modem. The best way is to read a lot i did and make your own decisions and just remember as long as you can get into Download mode you can use Odin to go back to stock
I have been using the CM9 ROM's since they came out, and they are fast, no buggier than any others, and I can get quite literally 24 hours on a charge with over 2 hours of screen time. Right now I have been on battery for 2.5 hours and I am still at 96%.
I personally don't think you can go wrong with CM9, but that's just my opinion, and you know what they say about those...
I have flashed pretty much every i727 ROM on my i727r and haven't had a problem.
Sent from my SAMSUNG-SGH-I727R on Alien ICS #8
well i have just changed from gb rc7 to sky ics 4.2e with the 15ish update and it is AWSOME for the i727r !!! you should try it out
Royal Bank APP
Hey guys.
Just wondering is there a solution for downloading apps which are made for canadian based roms but i am use Sky ICS.
Basically it says that the software is not supported for this device. Is there a way to change the ID in the phone software so Google Play sees the device as a I727R (rogers).
Be nice if rogers would get their act together and release their rom so the community can start creating custom roms with it.
Thanks.
B.

Re: [ROM] SKY-ICS 4.2F3-7 (UXCLF3 Base) 7/9/12 OFFICIAL ROGERS ICS AT&T/ROGERS SAFE

Re: [ROM] SKY-ICS 4.2F3-7 (UXCLF3 Base) 7/9/12 OFFICIAL ROGERS ICS AT&T/ROGERS SAFE
Message to noobs from a beginner.
This was my first root, flash, ROM and everything. I came from a 4s.
First I was pretty scared but I read most of the stickies and learned the "lingo".
I then researched and found that generally most folks thought very highly of Sean and his ROMs so I decided on this one. I wanted an official release and most posts thought Rogers was better than ATT. I'm an ATT customer btw.
First flash bootlooped. Had to switch to touch CWM from regular. Flashed the new touch cwm via Odin instead of buying it. Why it makes a difference I have noooo idea but the exact same steps allowed a perfect ROM install.
Next I was confused on radio choices. Used the RAT UNLOCKED Rogers at first but freaked out bc it want giving me any data. Had to switch from any option looking for LTE since its not available.
Touch UX is better than twlauncher but there are still some bus with settings, that don't stick even after saving sometimes.
Everything came in so easily from my google account and TiBu. Thanks for making that so easy. No APN work needed by me.
Eventually decided to flash the 6 radio and the 6 sky ics modded kernel. The combination of these two took my average ram, everything cleared, from 340ish to 240ish and the battery practically sits still. All I did was clear cache and dalvik for each flash and had zero problems.
This ROM is a very good one and ICS is much smoother than GB.
Don't be afraid to flash kernels or radios, just have a nice nandroid backup ready! I haven't needed one yet with these files.
Check out YouTube to see walkthroughs if needed, there are so many.
I thought about switching ROms yesterday, to Mohans new one. Even had it downloaded, but decided against it bc people were reporting awful battery life and is still based on an ATT leak instead of an official.
Noobs, read and learn. Doing this stuff is so easy if you do. If you haven't understood this post, itself very basic, don't flash anything yet!
Sent from my SAMSUNG-SGH-I727 using xda premium
Great Info
thanks for the info. Moved to seanz Dragon ics. Best rom ever for battery life and smoothness.
I did first flash with this Rom too. easy. i was also an iphone user. Swinched to droid a few years back but never got around to flashing till last weekend.

[Q] 727r rom / kernel / modem combo for WIND

I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
WORKING(more or less) COMBOS:
R34P3ReX_T989_Skyrocket_Conversion - Juggernaut_50_0218 - Tmo_SGH-T989_KID_radio
Gingerbread base, gyroscope tilts screen wrong way, a bit buggy, but works
CM10, CM10, T989UVLH1
Works well enough, having Call issues though. Going to try a new radio
Cyanogen always gets terrible battery. Going to look for an optimized version but not a problem for me
CM10, Blaze 4G UVLH5
Calling worked, I could hear caller, but they heard a lot of garbled blarky. Not good
u don't need a specific ROM or kernel at all, all u need to do is try different t radios. try the uvle1 from the t989 aka Hercules subsection, and give the modem someone dumped from the i757m bell version to see if u can catch a signal. I strongly believe the later will work
pileot said:
I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
Click to expand...
Click to collapse
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
df186 said:
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
Click to expand...
Click to collapse
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
I have been running SkyJB 4.1.2, and Blaze LB7 in Southern Ontario, picking up Wind signals. Speeds are okay, still trying to find the best combo, but that combo works.
kr4tos said:
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
Click to expand...
Click to collapse
flash the radio twice,no cable plugged in before flashing rom, might help
df186 said:
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
Click to expand...
Click to collapse
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
pileot said:
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
Click to expand...
Click to collapse
if it was built for t989 specific phones it wont install because of the assert
u dont need a t989 rom anyways, but if you want to try them out make sure the updater script doesnt have the assert function and do the rotation fix
I'm using the i727r (Rogers) running CM 10.1. I'm still on Rogers using the stock radio for now. Is there any consensus as to which radio file to flash for best results?
I know this thread is a little stale, but I figured I would throw in my two cents.
I have an i727r, unlocked. Right now I am running PACman Rom (http://forum.xda-developers.com/showthread.php?t=2178402) with the Blaze LB7 radio (4th from the bottom here: http://forum.xda-developers.com/showthread.php?t=1895400). They said I shouldn't be able to run an ICS radio with a JB Rom, but somehow it seems to be working. Note that the radio was on there before flashing PACman.
The kernel showing up in my phone info is the one that came with the PACman Rom, 3.0.72-cyanogenmod. I know this because before flashing PACman over stock, the kernel was 3.0.8.
Having said all that I'm thinking about updating my radio, probably to UVMB1. I'm not sure if I should bother though. I have a Nexus S, which is designed as an AWS phone out of the factory, and when I put my SIM card in that phone, the speedtest results are the same as what I'm getting right now with the LB7 radio on the Skyrocket. So I'm not sure I'd gain much by updating. :/
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
droiduzr2 said:
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
Click to expand...
Click to collapse
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
wraith79 said:
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
Click to expand...
Click to collapse
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Edited: UVMB1 as well
icenight89 said:
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Click to expand...
Click to collapse
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
You will, or already have had issues you're not aware of.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
Edited, UVMB1, the NEW Blaze 4G radio from this thread seems to work as well:
http://forum.xda-developers.com/showthread.php?t=1895400
But like x said, u had issues u just weren't aware of them. Problems don't just APPEAR for no reason.
this threads getting confusing.
ucmc1 and uxuma7 is for rogers and att users on cm10.1
if using unlocked skyrocket for other carriers then you would need compatible jb radio for the new/unlocked carrier for cm10.1 based roms
so for tmo/wind etc you would need UVMB1 for the AWS bands, there are other jb radios for telus, bell but don't know if/how well they work on said carrier.
so if your carrier uses the same frequency's as tmo then UVMB1 seems to be what users are reporting success with.
if your carrier is using same frequency as att/rogers then the ucmc1 or uxuma7 radio is what you need
correct me if im wrong
^^^ this is exactly what I said except in a more detailed explanation .
icenight89 said:
^^^ this is exactly what I said except in a more detailed explanation .
Click to expand...
Click to collapse
good, i just needed a confirmation so i can add that info and a link to this post in the radio section of the 1stop sticky

[Q] LTE toggle not working on Spacerocket rom

I have flashed the Rogers Jellybean radio on my ATT Galaxy s2 skyrocket i727 and it has successfully toggled LTE and 3g on several custom roms. But for some reason it has not worked on SpaceRocket Rom I727 Full S5 Experience. The radio works fine for the LTE band but I am unable to toggle between LTE and 3g. Flashing back to Beanstalk rom or LiquidSmooth rom and I am able to toggle again. My baseband version is i727RUXUMA7. I am using the ATT network, and under mobile settings.../APNs I have only one listing, which is ATT Phone. When using the other custom roms there were several listings: ATT Lte, Straighttalk,..etc. Under Available networks, there is only a selection for "Default setup", which is grayed out. What am i missing? I have read thru the stickies several times trying to catch my own mistakes and I assume that I missed something. Any help would be great.
Sounds like an issue with the ROM.
Sent from my SAMSUNG-SGH-I727 using XDA Free mobile app
That is what i was afraid of. I was hoping it was something easy to fix on my end because I really like this rom. Could it be that this rom is Sansung based and not CM.xx based, or does that even matter? Does the LTE toggle by method of flashing Rogers radio work on stock rooted roms?

Categories

Resources