Hi there,
I've accidently deleted all contents in /system/etc and now my tf300 won't boot anymore.
Stupid, i know!
Info: ww.30, locked, rooted, adb not working (debugging mode is off)
Any help please!
Thanks,
Marco
The same happened to me too. I have a tf300tg and it found a system update but after the first reboot it got stuck on the boot screen.
It is unblocked and rooted.
how can I unbrick it?
Hey guys hope this helps Link its a tutorial to fix your your 300 using linux
d_crossfader said:
Hey guys hope this helps Link its a tutorial to fix your your 300 using linux
Click to expand...
Click to collapse
Tried that, but adb is not working.
Return the device to the shop.
Thanks anyway!
Sent from my GT-I9000 using Tapatalk 2
I still have mine, but I do not have linux installed on my pc.
I can access the tab through fastboot but not adb.
can I fix it somehow through that?
thanks.
peseotni said:
I still have mine, but I do not have linux installed on my pc.
I can access the tab through fastboot but not adb.
can I fix it somehow through that?
thanks.
Click to expand...
Click to collapse
I'm not sure but Google for "fastboot commands"
I did that, but when I want to flash something on boot, system or recovery partition it gives me the following error message:
FAILED (remote: (InsufficientMemory))
even after I eraced the partitions.
What else can I do now?
peseotni said:
I did that, but when I want to flash something on boot, system or recovery partition it gives me the following error message:
FAILED (remote: (InsufficientMemory))
even after I eraced the partitions.
What else can I do now?
Click to expand...
Click to collapse
Never used fastboot so i can't help you. Good luck in finding a solution!
Sent from my GT-I9000 using Tapatalk 2
Can you download a rom and use "fastboot flash zip rom.zip"?
Sent from my Incredible 2 using Tapatalk 2 Beta-5
thanks it finally worked. Now I need to find a way to put the original rom on it. strangly enough it gives me an error message when I try to install the original rom.
peseotni said:
thanks it finally worked. Now I need to find a way to put the original rom on it. strangly enough it gives me an error message when I try to install the original rom.
Click to expand...
Click to collapse
Try reflashing recovery? You said you were messing with it earlier.
Sent from my Incredible 2 using Tapatalk 2 Beta-5
Tablet returned from Asus. They reflashed the device within warrenty. Root was no problem for Asus. Lucky me
Sent from my GT-I9000 using Tapatalk 2
MarcoHafkamp said:
Tablet returned from Asus. They reflashed the device within warrenty. Root was no problem for Asus. Lucky me
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Nice to hear that. Others had to pay 200€
Related
I am having trouble, and since I cant post on the page where this should be asked. (this is my first post) I am asking here hoping that somebody will look...
I have rooted my verizon S3 and it works great... I am however trying to install a CM10 Rom on my device. I have followed the instructions and get all the way to selecting the zip on the sdcard. it finds it, it opens it and after about 20 seconds it gives me a status 7 error and says error in XXXXXX\XXXXX .zip
I have done all the steps perfectly and have formatted and wiped it twice trying this... I even have my backup in place...
I have tried 3 or 4 different cm10 roms and they all give me the same error... What am i over looking?
Thanks
I think you need to flash a CWM/kexec hybrid recovery.
Download the app EZ Recovery and flash the hybrid CWM 6.0.1.0
Sent from my SCH-I535 using Tapatalk 2
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
DROID3R said:
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
Click to expand...
Click to collapse
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
kwiksilvr said:
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
Click to expand...
Click to collapse
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Marcismo55 said:
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
You could always Odin back to stock then re-root and install cwm again and restore your backup. May be an easier way not sure. But back up your files on a PC if you do that.
Sent from my SCH-I535 using xda app-developers app
kwiksilvr said:
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
Click to expand...
Click to collapse
I don't know how you are blaming me when I specifically told you to flash a ClockworkMod/Kexec recovery... not TWRP.
Seems your issue is lack of following directions. Good luck on solving your issue.
Sent from my SCH-I535 using Tapatalk 2
Hi everyone,
i am so very new to this. here it goes. I tried to root my HTC One S and install cm9. well the root worked. I installed the cm9 rom. that looked like it worked too. so i went to turn the phone on and it booted up ok, showed the cm9 boot up animation, then the screen went completly white and stayed like that. well i booted up into clockworkmod recovery, did a factory reset (i also did a factory reset/clear storage in bootloader), and accidentally erased everything, i think. stock rom, cm9 everything. now i can only get the phone to boot up into the bootloader or clockworkmod recovery. so i think its bricked. it tried to install the tmobile ruu and that failed. idk what to do, im really nervous i wont be able to get my phone back. cwmr also says it cant mount sd card..when i plugged the phone in to the computer, devices menu says android and sometimes it says ville. If someone is able to give me step by step instructions on how to fix this, i would greatly appreciate it because i am freaking out. I have seen the term flash around the forums idk what that means or how to do it. i also tried forcing a new rom thru adb and that didnt work. i really dont know what to do at this point. I would greatly appreciate it, if someone can help me with this.
Thanks
Frank
My guess would be: flash the stock recovery via fastboot.
Then get a RUU and install it. (and you probably just had the white screen because u didn´t flash boot.img).
southkill said:
My guess would be: flash the stock recovery via fastboot.
Then get a RUU and install it. (and you probably just had the white screen because u didn´t flash boot.img).
Click to expand...
Click to collapse
stupid question, but i am really not sure how to do that. where would i get the stock recovery? and what would the comand be in fastboot?
do i install the RUU while its locked, or unlocked?
flost0590 said:
Hi everyone,
i am so very new to this. here it goes. I tried to root my HTC One S and install cm9. well the root worked. I installed the cm9 rom. that looked like it worked too. so i went to turn the phone on and it booted up ok, showed the cm9 boot up animation, then the screen went completly white and stayed like that. well i booted up into clockworkmod recovery, did a factory reset (i also did a factory reset/clear storage in bootloader), and accidentally erased everything, i think. stock rom, cm9 everything. now i can only get the phone to boot up into the bootloader or clockworkmod recovery. so i think its bricked. it tried to install the tmobile ruu and that failed. idk what to do, im really nervous i wont be able to get my phone back. cwmr also says it cant mount sd card..when i plugged the phone in to the computer, devices menu says android and sometimes it says ville. If someone is able to give me step by step instructions on how to fix this, i would greatly appreciate it because i am freaking out. I have seen the term flash around the forums idk what that means or how to do it. i also tried forcing a new rom thru adb and that didnt work. i really dont know what to do at this point. I would greatly appreciate it, if someone can help me with this.
Thanks
Frank
Click to expand...
Click to collapse
try to relock your bootloader with the all in one toolkit and after that, while your phone is in fastboot usb mode with the bootloader reloked, install the offial ruu for your phone. Try to find the download of the original ruu, it is an exe file, when you run it the phone must be connected in fastboot usb, if everything goes fine the phone should be back to stock.
Ok I will try tonight. Hopefully it works.
Sent from my HTC_A510c using xda app-developers app
Will the code be fastboot flash push filename.exe /sdcard? If not what would the code be in fastboot?
Sent from my HTC_A510c using xda app-developers app
flost0590 said:
Will the code be fastboot flash push filename.exe /sdcard? If not what would the code be in fastboot?
Sent from my HTC_A510c using xda app-developers app
Click to expand...
Click to collapse
well i tried this method and this is what i got. it said bootloader signature failed. can someone help me with this
c:\fastboot>fastboot flash push RUU_Ville_U_TMOUS_1.84.531.2_R2_Radio_0.16.31501
S.16_2_10.22.31501S.10L_release_263233_signed.exe
sending 'push' (578821 KB)...
OKAY [ 24.679s]
writing 'push'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 71.776s
flost0590 said:
Will the code be fastboot flash push filename.exe /sdcard? If not what would the code be in fastboot?
Sent from my HTC_A510c using xda app-developers app
Click to expand...
Click to collapse
.EXE are run on your Windows PC. Connect phone to PC in fastboot mode. Click on.exe file on PC and follow directions on PC screen.
ok what if RUU fails with error 155?
i even extracted rom.zip from the RUU and tried to push it. both no go.
Yes I get the sane thing.
Sent from my HTC_A510c using xda app-developers app
Well I ended up funding a way to fix it. What I did was, relocked it, updated the drivers, then installed the stock rom
Sent from my Nexus 7 using xda app-developers app
flost0590 said:
Well I ended up funding a way to fix it. What I did was, relocked it, updated the drivers, then installed the stock rom
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Well I have a simular situation as I flashed the viper rom everything worked fine fof about a week now it will only boot straight to recovert but it wont mojnt sd card and I can also get to bootloader but thats it and I can get ig to ruu ??? So just so you know im rooted CWM and its unlocked sOff thanks PLEASE ADVISE
Please help with patients
sorry
So I updated my bootloader to 4.2 fine, now I'm unable to install twrp, fastboot just comes back with:
sending 'recovery' (7872 KB)... FAILED (command write failed (Unknown error))
or sometimes I just hangs on sending...
I can't do anything :/
can anyone help?
Are you sure you are using the correct version of twrp? It is bootloader specific and in my experience WW OR US specific. Make sure you are using the 4.2 compatible version. If that is all good, try downloading again. Maybe you got a bad download or bad cable
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Yeah everything's fine, it just keeps giving that error, I'm just grateful it does work, just can't flash any ROMs on it, stuck with stock
Sent from my HTC One using Tapatalk 4 Beta
My guess is something is wrong with your Windows installation of the Android SDK. Perhaps the USB drivers of your tablet as well?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Weaponx525 said:
My guess is something is wrong with your Windows installation of the Android SDK. Perhaps the USB drivers of your tablet as well?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I've tried reinstalling it all, some fastboot commands work fine, I just can't send the recovery over :/ fastboot erase cache works perfectly :/
Sent from my HTC One using Tapatalk 4 Beta
l.m.prowse said:
I've tried reinstalling it all, some fastboot commands work fine, I just can't send the recovery over :/ fastboot erase cache works perfectly :/
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Try a different USB port. I had this same problem when I used the front port on my computer. Once I moved to the back port everything worked like a dream. If that doesn't help it might be a bad cable.
Okay new problem, I got that working, and i flashed the 2.5 4.2 bootloader, but nothing works, nothing would boot, and now the recovery says version is 2.4.3.0, but the downloaded file that i flashed says its 2.5.0.0-4.2, it cant mount anything, I cant even get back to the fastboot screen, it just boots to recovery
edit: it can only mount the system partition too, nothing esle :/
l.m.prowse said:
Okay new problem, I got that working, and i flashed the 2.5 4.2 bootloader, but nothing works, nothing would boot, and now the recovery says version is 2.4.3.0, but the downloaded file that i flashed says its 2.5.0.0-4.2, it cant mount anything, I cant even get back to the fastboot screen, it just boots to recovery
edit: it can only mount the system partition too, nothing esle :/
Click to expand...
Click to collapse
Can you boot up into your system?
Sent from my Inspire 4G using xda app-developers app
andrewnelson23 said:
Can you boot up into your system?
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
Nope :/ it says theres no os installed
Sent from my HTC One using Tapatalk 4 Beta
So i will give you on qyestion did you verifey the files if they are corruped
Sent from my LG-P895 using xda premium
pinoxia-devlopper said:
So i will give you on qyestion did you verifey the files if they are corruped
Sent from my LG-P895 using xda premium
Click to expand...
Click to collapse
Yeah they were fine, I genuinely have no idea what's gone wrong :/
Sent from my HTC One using Tapatalk 4 Beta
So tell you seriously that there is no chang while installing a new rom in my galaxy ace i have installed jelly blast rom after that i used ram expander to get more ram up to 1 Go not ddr but like readyboost i searched shadowgun deadzone and he still not working. only the kernel and android version change nothing else -_- so good luck for your HTC one hope he will survive hehe
Sent from my LG-P895 using xda premium
Trying to load CM11 M1 and now in a boot loop. Haven't been able to copy the new image over yet. Unable to get into recovery mode, just the stock 'four circles' spinning. Can anyone help? Thanks
Can you get to Fastboot?
Sent from my Nexus 5 using xda app-developers app
Not fubar yet buddy. Get into fastboot and proceed from there. A quick search should provide ample answers. Give me 5 and I'll write you a step by step if need be.
On my phone. Limited with links and all.
Sent from my Nexus 5
Same things been happening to me all day trying to get it to load but it is always stuck on a loop on the load screen.
To get out from it ive been disconnecting from computer and holding power off, the cyanogenmod will auto start FOR SOME REASON but just keep powering off till its dead then start up recovery wipe cache/data etc and restore your backup.
There's another thread on this same issue
Edit, links all wonky
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=526
Click to expand...
Click to collapse
Link no worky.
Neurotica said:
Not fubar yet buddy. Get into fastboot and proceed from there. A quick search should provide ample answers. Give me 5 and I'll write you a step by step if need be.
On my phone. Limited with links and all.
Sent from my Nexus 5
Click to expand...
Click to collapse
Much obliged. I can get into CWM recovery now, just not sure next steps since I don't have a image on the sdcard yet...
jd1639 said:
There's another thread on this same issue
Edit, links all wonky
Click to expand...
Click to collapse
This link?
http://forum.xda-developers.com/showthread.php?t=2589940
Harry GT-S5830 said:
Can you get to Fastboot?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
In Fastboot... now not sure what's next. Can't adb push the new image....
theesotericone said:
This link?
http://forum.xda-developers.com/showthread.php?t=2589940
Click to expand...
Click to collapse
That link works, thanks. Don't know why I didn't see it in my search. Following steps....
argh, driver issue now. Installed the updated USB drivers from the SDK but when I'm in CWM recovery mode I had a banged out device. Had to install the naked drivers... Boy, this is fun. :silly:
Tried every build available aswell tried both manual root/Su and CF Auto root but no combination will it load, will also do a system restore on my main rig after messing around with all the random driver installations.
Try it on a spare laptop, you never know, might get lucky.
I did notice on the log file in CWM after installation there are 2 file that cannot be installed, I do not know if that has anything to do with it or not, looks like some sort of addon folder that cant be located. Only other thing I can think of is using a more stable version of CWM.
Try twrp and see if you have the same issues. http://d-h.st/YpG. Just flash it in cwm.
If all else fails, flash a factory system image and then format /data and the cache partitions.
This will get your device working while you learn more about how to flash it, and recover it if necessary.
Sent from my Nexus 5 using Tapatalk
rrsarge said:
In Fastboot... now not sure what's next. Can't adb push the new image....
Click to expand...
Click to collapse
You flash the stock image, try extract the files and execute the flash-all batch file.
Yesterday I managed to press install on the newest update, 4.4.4 on my Nexus 5. It was rooted and still is, but by installing this OTA it somehow made it crash. Now that I try to get into recovery mode I just get the android which is dead with an ! on it. It was rooted with Xposed and TWRP.
What do I do? Im on a Mac
OTA removed root replaces recovery. I'm amazed it managed to replace recovery whilst Xposed was installed. Anyway, seems like it did.
You must fastboot flash a custom recovery
Sent from my Nexus 5 using Tapatalk
rootSU said:
OTA removed root replaces recovery. I'm amazed it managed to replace recovery whilst Xposed was installed. Anyway, seems like it did.
You must fastboot flash a custom recovery
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I feel embarrassed to ask, but how do I do that on my Mac? When I rooted it I did it on my PC at home, now Im traveling with my Mac for work..
Thanks!
killhaug said:
I feel embarrassed to ask, but how do I do that on my Mac? When I rooted it I did it on my PC at home, now Im traveling with my Mac for work..
Thanks!
Click to expand...
Click to collapse
The same really. Install fastboot and use the "fastboot flash recovery /pathto/your/recovery.img" command
Sent from my Nexus 5 using Tapatalk
rootSU said:
The same really. Install fastboot and use the "fastboot flash recovery /pathto/your/recovery.img" command
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I did this and now Im stuck in a TWRP loop, wont get into the system. I dont know what to do now, any inputs?
EDIT: Solved it. Thanks!