Database Info

[Q] Droid Charge Baseband-Help

Ok..I always try to figure it out by searching the forums...could not get there this time. I had Humbles rom on the phone...then I realized I should update my Baseband...so the mission starts.. I started on Basband ep3 on both the first and second lines..after reading it sounded like I needed to flash back to stock to get the update to ee4....I first deactivated voodo by adding the file directly ...reset phone then waited while the sexy voice said it was deactivated... then I flashed the stock rom...when I powered up the the phone on stock ...it did download the update...while installing the update it crashes and does not install correctly...so after messing around I re-flashed the stock rom and then downloaded the update again.....same thing happened.....then after reading some more I thought maybe my partitions where jacked so I flashed charge.pit ...now my phone wouldn't even show signs of life...stressing a bit ....I was able to flash Hummble 4.0 which brought my phone back to life...happy that it is working I'm now back where I originally started but now I'm on Ep1...even worse than before I started..lol
Does anyone have any ideas why it would not update? any help would be great!

Ep3 is the newest radio version. Ep1 is the second newest. And ee4 is the oldest. So you were really trying to unupdate. You are fine with the ep1 modems. But if you want to upgrade flash the ep3h radios through Odin.
Sent from my Gummy Charged GBE 2.1 using XDA App

Yep
I'm confused....thanks for the clarification.... I thought I had to go to stock to get any updates...whats with all the posts talking about that?

any quick link to where I could download the ep3 for odin? much appreciated

kmichaeld said:
any quick link to where I could download the ep3 for odin? much appreciated
Click to expand...
Click to collapse
Here ya go - EP3 Modem

The only reason you ever need to go back to stock is if you want to "unroot" your phone or to fix soft bricks. The baseband version corrosponds to the type of radios your phone is running (how you get your signal). And the radios are always independent of your ROM. Here's a short overview of the different radios from beginning to present.
ED1: Original charge modem. (sucked).
ED2: still sucks.
EE4: Latest official update for the droid charge. This is the radio that most Froyo Roms are based off of.
<I'm going to skip over a few because they are kind of non-existant now>
EP1Q: A leaked Gingerbread Radio. Significant improvements in signal strength.
EP1W: Improves upon EP1Q radio by handling data switching better. (A lot of Gingerbread ROMS are based off of this radio).
EP3H: The newest radio and probably the best. Some small improvements in data switching and got rid of occasional "popping" sounds from EP1W radio. Most of the newest ROMS use this radio as a base (Meaning they are optimized to use this radio).
Long story short, use the latest Radios. They always bring improvements. =)

Looking for a stable rom

so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!

nvertigo said:
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
Click to expand...
Click to collapse
Yes, you can use the one-click to put KJ6 on there then flash a different ROM via CWM.

Personally I've had the best experience with Valhalla ROMs. Last night I just flashed RAVERX3X latest Valhalla Black build. Its low profile so it's quick and responsive, and even better, not a single instability issue.
Sent from my SGH-T959V using XDA App

thanks for the advice guys!

I did the first flash step, which worked successfully and rebooted my phone. then i tried to flash the bootloaders that came with it, but uploading PIT 1/10 failed, and it froze trying to end session. i pulled the battery and the phone seemed bricked, but i connected the cable and oneclick said it was connected (no download mode screen, no lights at all). so i did the initial one-click flash and let it reboot again, then flashed valhalla black.
nothing SEEMS to be wrong, but i'm a little scared. can anyone weigh in on what happened?

You're ok. I can't explain what happened but people have reported similar issues, nothing on the screen but it can be seen in ODIN, and were able to recover (as you did) just fine.
Sent from my SGH-T959V using XDA App

This section of XDA is small, but good in terms of quality.
I just flashed Raver's Cyanogenmod/Valhalla hybrid and it is smooth and stable.

One-Click...
At the beginning of the week, I still had Froyo on my device.
I used Bryan's one-click (SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar)...
(I had a scare, too... which involved the so-called "Rainbow screen" -- but FB suggested I run the one-click, again and also to do the Bootloaders -- and everything turned out ok).
But, I needed to get CWM 5 (and, that particular one-click had CWM 3.0.2.8x)
So, I flashed an update of Bryan's kernel (sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip)
And, because I was feeling overjoyed at all the goodness that I'd seen so far, I flashed RaverX3X's rc3.zip (from Team Acid's Source Forge site)...
And, life is really, really, really... good.

yep
+1 Valhalla black edition! Installed today and love love love.

ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!

nvertigo said:
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
Click to expand...
Click to collapse
Not sure about the crashing but I experienced reboots because of the kernel Valhalla Black uses. There are fixes out there for that part of the problem but what you should really is perform a factory data reset, do the one to get a ROM with CWM on it, then use CWM to install Valhalla Black per the instructions on the page for it. I've a feeling you'll be much more stable after that.
As for the 10 minutes, that's basically to allow your phone to rebuild the Davlik cache (cache with optimizations for your apps). Definitely let it sit while it does that just to be safe.

thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.

nvertigo said:
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
Click to expand...
Click to collapse
If it was fully booting and you weren't getting the "rainbow" screen, then your boot loaders are fine. If in doubt, go check out bhundven's one-clicks, and run one of them - twice. The first time it doesn't let you check the boot loader box but the 2nd time it does.
Valhalla Final comes with bundven's beta 2c kernel. I believe people are running that without issue. Keep in mind Valhalla Final and Valhalla Black are two different ROMs with two different kernels.
I did a one-click back to stock (factory reset, cache wipes, etc.) & am running bhundven's latest beta kernel with no problems (thus far).

ICS frustrations - rant

I have come to the conclusion that something is wrong with my phone. I have tried to install ICS....a lot. I am not exagerating when I say that I have tried every Odin install, and every ICS ROM that has more than a few positive results. Nothing will work. I am not new to flashing, I have had a Captivate, Inspire, Tab and have had no issues with those, even created a few themes and build.prop tweaks. I know what I am doing and I follow the OP instructions perfectly. The damn thing just wont take. I get the white Samsung screen, a black screen, a vibration, and a reboot. So at this point I think I am just going to stick with GB for right now and hope that either the offcial ICS update works (when available) or maybe 5.0 later this year.
Two weeks of try to make this work has run me ragged. Outside of the ICS issues though this is by far the best device I have had in terms of performance and reliablility.
Rant over.

Did u flash the uclc5 radio at any point in time?
If not what radio did u install, and did u install it before u flashed ics rom?
What recovery were u using?
Did u odin back stock in between each ics attempt? Did u use dark side wipe at all?
*#* Google dropbox, its useful.
https://www.dropbox.com/referrals/NTcwNDE0ODUyOQ *#*

icenight89 said:
Did u flash the uclc5 radio at any point in time?
If not what radio did u install, and did u install it before u flashed ics rom?
What recovery were u using?
Did u odin back stock in between each ics attempt? Did u use dark side wipe at all?
*#* Google dropbox, its useful.
https://www.dropbox.com/referrals/NTcwNDE0ODUyOQ *#*
Click to expand...
Click to collapse
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?

lacer4576 said:
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
Click to expand...
Click to collapse
Personally, I haven't had anything but trouble with superdarkside. Its an excellent tool, but for me, hasn't meshed well with ICS. You should try following seans op for Sky ICS UCLC4, without using darkside at all to change from where your at now.
Also, the modem (aside from UCLC5 for some) has no effect on the installs, I sat on Sky ICS UCLC4 with the UCLC3 modem for a couple weeks without any issues at all.
I have tried all of the CWM mods posted here, and to be honest, my favorite is the CWM touch when installed from rommanager. Seans roms seem to take better with it more than the rest. The CWM touch that is posted on the sky UCLC4 OP is good, but it has a couple minor bugs.
Are you using SuperSU or superuser? Supersu has backfired on numerous occasions for me, I always stick to superuser (and I'm sure I'll be flamed for the comment. Every skyrocket reacts differently, remember)

mahausrath said:
Personally, I haven't had anything but trouble with superdarkside. Its an excellent tool, but for me, hasn't meshed well with ICS. You should try following seans op for Sky ICS UCLC4, without using darkside at all to change from where your at now.
Also, the modem (aside from UCLC5 for some) has no effect on the installs, I sat on Sky ICS UCLC4 with the UCLC3 modem for a couple weeks without any issues at all.
I have tried all of the CWM mods posted here, and to be honest, my favorite is the CWM touch when installed from rommanager. Seans roms seem to take better with it more than the rest. The CWM touch that is posted on the sky UCLC4 OP is good, but it has a couple minor bugs.
Are you using SuperSU or superuser? Supersu has backfired on numerous occasions for me, I always stick to superuser (and I'm sure I'll be flamed for the comment. Every skyrocket reacts differently, remember)
Click to expand...
Click to collapse
I will give it a shot. I would really like to get back to ICS, I got so used to it on my other phones.
I have been using superuser, haven't had a problem yet from that.

lacer4576 said:
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
Click to expand...
Click to collapse
I know this may be silly but have you tried to re-download the one click leak your using? Maybe you have a bad download or a corrupt file. And, or try to use a different usb port when you flash. It seems you've tried everything and maybe you have a defective device. I started having a lot of issues recently after going from ROM to ROM so I just flashed the one-click to get back to a clean state and then carefully chose which ROM I wanted to use and carefully install it. I've always used Darkside Superwipe but since I've quit using it, things have been much smoother. What I do now is what most Devs are saying now is to wipe/factory reset multiple times and format/system multiple times. If thats not working maybe go all the way back to stock GB with k0nanes stock tar and go from there. As far as the uclc5 radio, be careful!! I'm sure you've read that it can corrupt a partition and cause issues. I did flash it once and it did work for 48 hours but I noticed signal loss so I flashed back to uclc2. Maybe I got lucky it didn't mess me up, who knows? And if you have an issue not receiving an official update, IF you do go back to the stock GB tar, do a nandroid and flash that when it comes out. Just make sure you flash the stock recovery before you take it. I have a stock GB backup on my SD, so IF and WHEN it does come out, I'll just flash the backup, flash stock recovery and take the OTA. With your constant bootloops, it seems to me its a bad download or a defective device. It seems you've tried everything. Good luck...

^^^ this makes sense. Also I was asking about the note radio to advise u against it, or u may end up screwing up ur phone even worse, and have to make a visit to my corrupt efs fix thread lol.

hcyplr29 said:
I know this may be silly but have you tried to re-download the one click leak your using? Maybe you have a bad download or a corrupt file. And, or try to use a different usb port when you flash. It seems you've tried everything and maybe you have a defective device. I started having a lot of issues recently after going from ROM to ROM so I just flashed the one-click to get back to a clean state and then carefully chose which ROM I wanted to use and carefully install it. I've always used Darkside Superwipe but since I've quit using it, things have been much smoother. What I do now is what most Devs are saying now is to wipe/factory reset multiple times and format/system multiple times. If thats not working maybe go all the way back to stock GB with k0nanes stock tar and go from there. As far as the uclc5 radio, be careful!! I'm sure you've read that it can corrupt a partition and cause issues. I did flash it once and it did work for 48 hours but I noticed signal loss so I flashed back to uclc2. Maybe I got lucky it didn't mess me up, who knows? And if you have an issue not receiving an official update, IF you do go back to the stock GB tar, do a nandroid and flash that when it comes out. Just make sure you flash the stock recovery before you take it. I have a stock GB backup on my SD, so IF and WHEN it does come out, I'll just flash the backup, flash stock recovery and take the OTA. With your constant bootloops, it seems to me its a bad download or a defective device. It seems you've tried everything. Good luck...
Click to expand...
Click to collapse
I will try to get a different download, but I do not think that is it. The only reason I say that is because my phone had the exact same response for EVERY ROM I have download. They can't all be bad files. I have tried on two different PCs with three different USB cables. Good thought though, I have had bad downloads before. I am going to keep trying as the ROMs are updated and hope that I figure out what is going on, and hope that I can get the official update at some point. Then I will just root it and get rid of the bloat myself if I have to
I am going to stay away from the L5 radio, not worth the hassle.

On a side note, if installing a rom from the site, remember, most will work with the "base"
But need to reset/full boot before "updating".. dont just flash rom and flash update then reboot

I had a hard time with ICS as well with different problems, all I can say is it disproves the definition of insanity. Trying the same things over and over again will eventually make it work!
Hang in there, it's worth it. Whenever you do get the ODIN one click to work I highly recommend flashing Raider03's SMOOTHIE ROM. Awesome battery life and extremely "SMOOTH"! But be prepared for a few FCs and bugs with all of the ICS ROMS for now!

Firmware question after bad flash

So I had a completely stock Galaxy s 4g, on gingerbread. I had the bright idea of rooting to try out different builds. I was in the middle of flashing when I noticed that what I was flashing was for the Vibrant. Well, it was either let it flash with that or stop the flash, so I stopped it. After searching for hours, I couldn't find a working link for a download to flash a custom build. I was able to find a "stock" flash, but for some reason I don't think it's right. I have problems with low call volume now and have to power the phone off and on to fix it temporarily. Everything else works fine, so far. Another thing I noticed is everyone shows firmware of 2.3.6, mine says 2.3.4????? Here's my info: sigh-t959v, baseband T959VUVKG4, kernel 2.6.35.7-t959vuvkg4-cl385158, build gingerbread.vuvkg4.
Any thoughts on what I should do?
Thanks in advance

This thread has heimdall one clicks that will get you back to stock kj6. Remember to flash once then after booting until you hear the t-mo jingle pull battery and put it back in download mode and check the flash bootloaders and flash it again.
http://forum.xda-developers.com/showthread.php?t=1358498
If you want root in the second post is a one click created by me. You can flash it instead of the plain stock one by bhundeven. But you need to flash the bootloaders to make sure you get rid of all the vibrant stuff.

Ok, thanks a lot. I will flash your build tomorrow when I get home from work. I'll let you know how it goes. Thanks again.

So I flashed your build and everythingis working great, even seems to be running faster. However, the wifi says "error" when I try and activate it. Is that a rom problem? Should I start over and try again?

It is because the kernel uses a different module then what is in the rom itself. That is why it is suppose to be used as a stepping stone to flash to a different rom.

Gotcha.

[Q] (CarbonROM) Flashed new modem firmware, signal sucks. Fix?

I was running Carbon 1.7 nightly on my VZW GS3, there was a slight issue with the ROM randomly rebooting, one of the devs(?) posted a link on G+ with a fix. An update firmware (modem/rpm/tz) from ARM should fix it, just flash and you should be good to go. I flashed it after reading several other people saying it helped and things were running smooth on their devices. I noticed that my connection was a little spotty and sometime my phone got stuck trying to turn on WiFi. I flashed my rom back to 1.7 Stable in case it was a fluke with the nightly I was on, WiFi is fixed, but I've noticed the past couple days that my 4G/LTE signal and general data speeds aren't what they used to be. I was next to my manager today at work, he had 3 bars and I was flickering between 0-1 on 4G.
Is there a fix for this? how to I got back to my old firmware? or is there a better one?
Thank you
Here is a link to the G+ post:
https://plus.google.com/u/0/104277415207525128383/posts/iAVpVPYqMtM

if im following correctly, you can just flash a modem/rpm.
go back to waht you had previously

ddurandSGS3 said:
if im following correctly, you can just flash a modem/rpm.
go back to waht you had previously
Click to expand...
Click to collapse
I don't know what/which to flash, or where to get it (trusted source/ correct modem/rpm). I'm really new at this, so I have no idea what I'm doing, when it comes to fixing things, though I seem to be good at breaking them.

go to the root wiki vzw s3 development section and check the stickies. there's a thread with all the radios and rpms
Sent from my SCH-I535 using xda premium

http://rootzwiki.com/topic/34053-modemrpmtz-vrbmb1-verizon-sgs3-sch-i535-recovery-flashable/