Looking for a stable rom - Samsung Galaxy S (4G Model)

so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!

nvertigo said:
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
Click to expand...
Click to collapse
Yes, you can use the one-click to put KJ6 on there then flash a different ROM via CWM.

Personally I've had the best experience with Valhalla ROMs. Last night I just flashed RAVERX3X latest Valhalla Black build. Its low profile so it's quick and responsive, and even better, not a single instability issue.
Sent from my SGH-T959V using XDA App

thanks for the advice guys!

I did the first flash step, which worked successfully and rebooted my phone. then i tried to flash the bootloaders that came with it, but uploading PIT 1/10 failed, and it froze trying to end session. i pulled the battery and the phone seemed bricked, but i connected the cable and oneclick said it was connected (no download mode screen, no lights at all). so i did the initial one-click flash and let it reboot again, then flashed valhalla black.
nothing SEEMS to be wrong, but i'm a little scared. can anyone weigh in on what happened?

You're ok. I can't explain what happened but people have reported similar issues, nothing on the screen but it can be seen in ODIN, and were able to recover (as you did) just fine.
Sent from my SGH-T959V using XDA App

This section of XDA is small, but good in terms of quality.
I just flashed Raver's Cyanogenmod/Valhalla hybrid and it is smooth and stable.

One-Click...
At the beginning of the week, I still had Froyo on my device.
I used Bryan's one-click (SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar)...
(I had a scare, too... which involved the so-called "Rainbow screen" -- but FB suggested I run the one-click, again and also to do the Bootloaders -- and everything turned out ok).
But, I needed to get CWM 5 (and, that particular one-click had CWM 3.0.2.8x)
So, I flashed an update of Bryan's kernel (sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip)
And, because I was feeling overjoyed at all the goodness that I'd seen so far, I flashed RaverX3X's rc3.zip (from Team Acid's Source Forge site)...
And, life is really, really, really... good.

yep
+1 Valhalla black edition! Installed today and love love love.

ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!

nvertigo said:
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
Click to expand...
Click to collapse
Not sure about the crashing but I experienced reboots because of the kernel Valhalla Black uses. There are fixes out there for that part of the problem but what you should really is perform a factory data reset, do the one to get a ROM with CWM on it, then use CWM to install Valhalla Black per the instructions on the page for it. I've a feeling you'll be much more stable after that.
As for the 10 minutes, that's basically to allow your phone to rebuild the Davlik cache (cache with optimizations for your apps). Definitely let it sit while it does that just to be safe.

thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.

nvertigo said:
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
Click to expand...
Click to collapse
If it was fully booting and you weren't getting the "rainbow" screen, then your boot loaders are fine. If in doubt, go check out bhundven's one-clicks, and run one of them - twice. The first time it doesn't let you check the boot loader box but the 2nd time it does.
Valhalla Final comes with bundven's beta 2c kernel. I believe people are running that without issue. Keep in mind Valhalla Final and Valhalla Black are two different ROMs with two different kernels.
I did a one-click back to stock (factory reset, cache wipes, etc.) & am running bhundven's latest beta kernel with no problems (thus far).

Related

MIUI 2.3.5 1.9.23 - No soft keys after succesfull flash

Appologies for not replying to the original MIUI thread. I am not a new user and i am very experienced in flashing roms etc, especially on samsung devices. I have been around for a while now but this is my first post so i cannot post in the dev section yet.
Last night i flashed MIUI to my infuse. I followed the instructions in the op here exactly.
http://forum.xda-developers.com/showthread.php?t=1278053
I had no problems flashing and everything was successfull, however there were 2 major issues. First being the soft keys. The four buttons menu, home, back, and search buttons did not function at all. They werent even backlit. The volume rocker and power buttons functioned fine. I reflashed from blue cwm twice and still nothing.
This is where i ran into my second issue. There were no posts about anyone having the soft key issue however i did notice alot of people losing their recover and being stuck on the samsung boot screen. This eventually happened to me.
I went to samfirmware and downloaded 2.1 and odin'd it, then odin'd the community kernel to get ext4 and red cwm then restored my nandroid so i am back to normal. I wanted to post about my soft key issue but as i said i had to post in q&a due to my lack of posts.
Any suggestions? if not, i at least wanted to inform the dev of the issue.
Thanks
have you tired CM7, just asking cuz they have almost the same bugs....so i would curious to see if your softkey issue transfers to that rom as well. and if not........
i would try loading up CM7, wiping from the orange CWM and flashing MiUi from there. it Should have worked the way you did itk if you were coming from stock. but who knows maybe seeing if it happens on Cm7 will lead to your answer.
just an idea though
no i havent been able to try cm7 yet as i dont have a build environment set up anymore and havent seen a release yet, would love to give it a shot if someone wants to send me a zip.
i really hope it doesnt have the same issue or ill have to donate this thing to my fiance and get a gs2 or something lol.
Check your mail, you seem to know what your doing so test it out see what happens.
Happy Flashing
Happy flashing indeed, thanks for this im going to give it a go right now, bbl with results.
Hell the only reason i was flashing miui to begin with is b/c i am currently unable to build cm7 so hope this works..
Thanks a ton!!
Ok so heres how it went down.
After my fail last night with the softkeys i did a little research and flashed serendipity s7. So with the cm7 zip you sent me i started out flashing over this since they are both ext4 i didnt think there would be a prob.
Followed your instructions, wipe, flash, pull battery, wipe, flash. After the first flash i was in orange cwm. I didnt give it a chance to boot until after the second flash obviously, but it would boot directly into orange cwm everytime.
From there i decided to odin to stock and flash the community kernel again.
Now that i was back in red cwm and formatted to ext4 i repeated your original instructions and everything flashed just fine.
As far as the soft keys, i have no issues at all. Everything is working just fine.
I was flashing from 2.1 uke3 last night, and thats also what i flashed with tonight and was successfull with.
Anyways thanks for the help glad to say im not having the issue with cm7. much appreciated
--forgot to add i am going to try to reflash miui coming from cm7 and see how that goes if i still get the same issue
--Okay, booted to orange cwm, wiped and flashed the same miui zip as before. Only one wipe and one flash no battery pull or anything. Everything flashed perfectly and my soft keys are functional. Not quite sure what the deal was before but miui is booting just fine. I'm afraid to boot recovery to many times as everyone seems to lose it after a few uses. We'll see how it goes for now, never been an miui fan to iphoneish for my taste but until i can build a recent cm7 rom i need something, was getting bored with rooted stock.
Thanks again for your help!
powdered_donuts said:
Ok so heres how it went down.
After my fail last night with the softkeys i did a little research and flashed serendipity s7. So with the cm7 zip you sent me i started out flashing over this since they are both ext4 i didnt think there would be a prob.
Followed your instructions, wipe, flash, pull battery, wipe, flash. After the first flash i was in orange cwm. I didnt give it a chance to boot until after the second flash obviously, but it would boot directly into orange cwm everytime.
From there i decided to odin to stock and flash the community kernel again.
Now that i was back in red cwm and formatted to ext4 i repeated your original instructions and everything flashed just fine.
As far as the soft keys, i have no issues at all. Everything is working just fine.
I was flashing from 2.1 uke3 last night, and thats also what i flashed with tonight and was successfull with.
Anyways thanks for the help glad to say im not having the issue with cm7. much appreciated
--forgot to add i am going to try to reflash miui coming from cm7 and see how that goes if i still get the same issue
--Okay, booted to orange cwm, wiped and flashed the same miui zip as before. Only one wipe and one flash no battery pull or anything. Everything flashed perfectly and my soft keys are functional. Not quite sure what the deal was before but miui is booting just fine. I'm afraid to boot recovery to many times as everyone seems to lose it after a few uses. We'll see how it goes for now, never been an miui fan to iphoneish for my taste but until i can build a recent cm7 rom i need something, was getting bored with rooted stock.
Thanks again for your help!
Click to expand...
Click to collapse
Glad it all worked out.....

[Q] Diagnosing Random Crashes/Freezes

Hello android gurus/deities (too much?),
Just got my first smartphone, a Droid Charge. Great phone, especially for the price. The screen is freaking fantastic and of course Android is amazing as ever.
However, since first activating it, I seem to get random crashes. I can't replicate the problem, since it doesn't seem connected to anything visual. First time it happened when I decided to check out the camera, took a picture, and tried to view it. Other times have been the first time trying out netflix, first time sending a text. Seems to happen the first time I use some apps.
The crash basically consists of a short 5-10 second freeze followed by a reboot. Any ideas? Is this a hardware issue I need to have addressed or more likely a software issue that I just need to wait for updates to come along and fix it? Or is this a common occurence with Android and I just need to suck it up? lol
Edit: Has also happened 3 or 4 times while browsing the web, including this site...
charges hardware are pretty great for the price the software is a big issue for the charge whitch is why most of us myself included suggest rooting your device whitch literally a dummy could do using odin... i am running a stock based of a leak called infinity rom pretty amazing for a stockish rom for now so reboots are known at least for me but i really think the majority of the problem for this phone is the software gps loss signal going in and out as in data (this is a hit and miss) ..... hope this helped you iron things out...
Out of curiosity, what will rooting my device accomplish with respect to the reboots? Anything?
I rooted the device, then tried infinityROM but ran into so many problems I flashed back to the factory rom X(... Rooted again, but still get reboots, any ideas?
Where can I get a more solid kernel? From reading around it sounds like that "might" solve the reboots :\
RevTorA said:
Where can I get a more solid kernel? From reading around it sounds like that "might" solve the reboots :\
Click to expand...
Click to collapse
http://rootzwiki.com/topic/4847-guide-new-users-guide-everything-how-to-root-rom-kernels-radios-cwm/
Also depends what rom you are running.
If it keeps happening after you root and flash a new kernel (and maybe install a rom) upload a logcat to a filesharing place and hop on IRC to ask for help.
irc.andirc.net
#charge
Port 6666
Sent from my SCH-I510 using xda premium
Thanks... once that site's back up I'll download a the kernel from there... The kernel on that page should work my Charge if it's currently the factory rom right?
Edit: Just to check, Imoseyon's kernel (listed here is the only available kernel aside from the factory kernel? I should try flashing this to see if it fixes my problem? Where can I get the factory kernel (just the kernel :\) if things go awry?
Edit2: Also found imnut's PBJT kernel here. I'm unaware of some of the terminologies (I've only messed with a couple Ubuntu/Fedora distros of linux), can this and any other kernel for the Charge work with Gingerbread (2.3.6)?
RevTorA said:
Thanks... once that site's back up I'll download a the kernel from there... The kernel on that page should work my Charge if it's currently the factory rom right?
Edit: Just to check, Imoseyon's kernel (listed here is the only available kernel aside from the factory kernel? I should try flashing this to see if it fixes my problem? Where can I get the factory kernel (just the kernel :\) if things go awry?
Edit2: Also found imnut's PBJT kernel here. I'm unaware of some of the terminologies (I've only messed with a couple Ubuntu/Fedora distros of linux), can this and any other kernel for the Charge work with Gingerbread (2.3.6)?
Click to expand...
Click to collapse
PBJ is a Froyo kernel. It will only work with Froyo.

ICS frustrations - rant

I have come to the conclusion that something is wrong with my phone. I have tried to install ICS....a lot. I am not exagerating when I say that I have tried every Odin install, and every ICS ROM that has more than a few positive results. Nothing will work. I am not new to flashing, I have had a Captivate, Inspire, Tab and have had no issues with those, even created a few themes and build.prop tweaks. I know what I am doing and I follow the OP instructions perfectly. The damn thing just wont take. I get the white Samsung screen, a black screen, a vibration, and a reboot. So at this point I think I am just going to stick with GB for right now and hope that either the offcial ICS update works (when available) or maybe 5.0 later this year.
Two weeks of try to make this work has run me ragged. Outside of the ICS issues though this is by far the best device I have had in terms of performance and reliablility.
Rant over.
Did u flash the uclc5 radio at any point in time?
If not what radio did u install, and did u install it before u flashed ics rom?
What recovery were u using?
Did u odin back stock in between each ics attempt? Did u use dark side wipe at all?
*#* Google dropbox, its useful.
https://www.dropbox.com/referrals/NTcwNDE0ODUyOQ *#*
icenight89 said:
Did u flash the uclc5 radio at any point in time?
If not what radio did u install, and did u install it before u flashed ics rom?
What recovery were u using?
Did u odin back stock in between each ics attempt? Did u use dark side wipe at all?
*#* Google dropbox, its useful.
https://www.dropbox.com/referrals/NTcwNDE0ODUyOQ *#*
Click to expand...
Click to collapse
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
lacer4576 said:
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
Click to expand...
Click to collapse
Personally, I haven't had anything but trouble with superdarkside. Its an excellent tool, but for me, hasn't meshed well with ICS. You should try following seans op for Sky ICS UCLC4, without using darkside at all to change from where your at now.
Also, the modem (aside from UCLC5 for some) has no effect on the installs, I sat on Sky ICS UCLC4 with the UCLC3 modem for a couple weeks without any issues at all.
I have tried all of the CWM mods posted here, and to be honest, my favorite is the CWM touch when installed from rommanager. Seans roms seem to take better with it more than the rest. The CWM touch that is posted on the sky UCLC4 OP is good, but it has a couple minor bugs.
Are you using SuperSU or superuser? Supersu has backfired on numerous occasions for me, I always stick to superuser (and I'm sure I'll be flamed for the comment. Every skyrocket reacts differently, remember)
mahausrath said:
Personally, I haven't had anything but trouble with superdarkside. Its an excellent tool, but for me, hasn't meshed well with ICS. You should try following seans op for Sky ICS UCLC4, without using darkside at all to change from where your at now.
Also, the modem (aside from UCLC5 for some) has no effect on the installs, I sat on Sky ICS UCLC4 with the UCLC3 modem for a couple weeks without any issues at all.
I have tried all of the CWM mods posted here, and to be honest, my favorite is the CWM touch when installed from rommanager. Seans roms seem to take better with it more than the rest. The CWM touch that is posted on the sky UCLC4 OP is good, but it has a couple minor bugs.
Are you using SuperSU or superuser? Supersu has backfired on numerous occasions for me, I always stick to superuser (and I'm sure I'll be flamed for the comment. Every skyrocket reacts differently, remember)
Click to expand...
Click to collapse
I will give it a shot. I would really like to get back to ICS, I got so used to it on my other phones.
I have been using superuser, haven't had a problem yet from that.
lacer4576 said:
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
Click to expand...
Click to collapse
I know this may be silly but have you tried to re-download the one click leak your using? Maybe you have a bad download or a corrupt file. And, or try to use a different usb port when you flash. It seems you've tried everything and maybe you have a defective device. I started having a lot of issues recently after going from ROM to ROM so I just flashed the one-click to get back to a clean state and then carefully chose which ROM I wanted to use and carefully install it. I've always used Darkside Superwipe but since I've quit using it, things have been much smoother. What I do now is what most Devs are saying now is to wipe/factory reset multiple times and format/system multiple times. If thats not working maybe go all the way back to stock GB with k0nanes stock tar and go from there. As far as the uclc5 radio, be careful!! I'm sure you've read that it can corrupt a partition and cause issues. I did flash it once and it did work for 48 hours but I noticed signal loss so I flashed back to uclc2. Maybe I got lucky it didn't mess me up, who knows? And if you have an issue not receiving an official update, IF you do go back to the stock GB tar, do a nandroid and flash that when it comes out. Just make sure you flash the stock recovery before you take it. I have a stock GB backup on my SD, so IF and WHEN it does come out, I'll just flash the backup, flash stock recovery and take the OTA. With your constant bootloops, it seems to me its a bad download or a defective device. It seems you've tried everything. Good luck...
^^^ this makes sense. Also I was asking about the note radio to advise u against it, or u may end up screwing up ur phone even worse, and have to make a visit to my corrupt efs fix thread lol.
hcyplr29 said:
I know this may be silly but have you tried to re-download the one click leak your using? Maybe you have a bad download or a corrupt file. And, or try to use a different usb port when you flash. It seems you've tried everything and maybe you have a defective device. I started having a lot of issues recently after going from ROM to ROM so I just flashed the one-click to get back to a clean state and then carefully chose which ROM I wanted to use and carefully install it. I've always used Darkside Superwipe but since I've quit using it, things have been much smoother. What I do now is what most Devs are saying now is to wipe/factory reset multiple times and format/system multiple times. If thats not working maybe go all the way back to stock GB with k0nanes stock tar and go from there. As far as the uclc5 radio, be careful!! I'm sure you've read that it can corrupt a partition and cause issues. I did flash it once and it did work for 48 hours but I noticed signal loss so I flashed back to uclc2. Maybe I got lucky it didn't mess me up, who knows? And if you have an issue not receiving an official update, IF you do go back to the stock GB tar, do a nandroid and flash that when it comes out. Just make sure you flash the stock recovery before you take it. I have a stock GB backup on my SD, so IF and WHEN it does come out, I'll just flash the backup, flash stock recovery and take the OTA. With your constant bootloops, it seems to me its a bad download or a defective device. It seems you've tried everything. Good luck...
Click to expand...
Click to collapse
I will try to get a different download, but I do not think that is it. The only reason I say that is because my phone had the exact same response for EVERY ROM I have download. They can't all be bad files. I have tried on two different PCs with three different USB cables. Good thought though, I have had bad downloads before. I am going to keep trying as the ROMs are updated and hope that I figure out what is going on, and hope that I can get the official update at some point. Then I will just root it and get rid of the bloat myself if I have to
I am going to stay away from the L5 radio, not worth the hassle.
On a side note, if installing a rom from the site, remember, most will work with the "base"
But need to reset/full boot before "updating".. dont just flash rom and flash update then reboot
I had a hard time with ICS as well with different problems, all I can say is it disproves the definition of insanity. Trying the same things over and over again will eventually make it work!
Hang in there, it's worth it. Whenever you do get the ODIN one click to work I highly recommend flashing Raider03's SMOOTHIE ROM. Awesome battery life and extremely "SMOOTH"! But be prepared for a few FCs and bugs with all of the ICS ROMS for now!

[Q] Cannot get from GB to ICS at all.

I keep running into problems after flashing any ICS custom ROM. (Maybe I should try going to an ICS Stock ROM first).
Most times it just loops on the loading screen.
- Phone is rooted of course.
- I usually have the Emancipation GB custom rom before flashing to this one or a Stock GB with root and red CWM.
- I follow instructions to a 'tee'
- When I do reboot, it loops at Samsung logo.
The last time I tried (Dark Knight ICS Rom), just recently, I flashed then rebooted into recovery (from advance-boot to recovery), and it didn't go to recovery mode, it just looped.
So currently I'm on Stock GB with root and red CWM.
What am I doing wrong?
What are some things I should consider?
Some of the GB custom roms are nice yes, but I rooted mainly so I could get ICS.
Thanks for any help anyone can offer/
http://forum.xda-developers.com/showthread.php?t=1610374
Wipe cache/Wipe dalvick/factory restore
You flash the rom
Then Gapps
Restart....Then it bootloops?
omansteveo said:
http://forum.xda-developers.com/showthread.php?t=1610374
Wipe cache/Wipe dalvick/factory restore
You flash the rom
Then Gapps
Restart....Then it bootloops?
Click to expand...
Click to collapse
Yeah pretty much.
Only happens for ICS ROMs. Well the ones I've tried.
Still new at this, so I'll keep trying and that link you posted is one of my most visited links.
Skebodan said:
Yeah pretty much.
Only happens for ICS ROMs. Well the ones I've tried.
Still new at this, so I'll keep trying and that link you posted is one of my most visited links.
Click to expand...
Click to collapse
Ive been at it for about 5 months now and have bricked my phone like 20 times ha ha...so Ill do what I can to help. I've been successful going from GB to ICS to JB and vice versa. Try this also....When you phone starts to boot loop pull the battery and boot into recovery. Then wipe everything again and reflash the rom and gapps
omansteveo said:
Ive been at it for about 5 months now and have bricked my phone like 20 times ha ha...so Ill do what I can to help. I've been successful going from GB to ICS to JB and vice versa. Try this also....When you phone starts to boot loop pull the battery and boot into recovery. Then wipe everything again and reflash the rom and gapps
Click to expand...
Click to collapse
lol alright thanks man. I've bricked mine about twice now. Just started about a week lol.
I'll give you an update in about 2 hours. Got to get ready for work
I have gone from Emancipation to this in the past with no prob... just follow his instructions for install and you are good to go - credit and thanks to Entropy512.
http://forum.xda-developers.com/showthread.php?t=1601844
Pony Express said:
I have gone from Emancipation to this in the past with no prob... just follow his instructions for install and you are good to go - credit and thanks to Entropy512.
http://forum.xda-developers.com/showthread.php?t=1601844
Click to expand...
Click to collapse
To be honest I was running from using Entropy's build.
Fear of it being too technical (It's actually the first thread I saw when I was thinking of going to ICS). So I used it and my phone is up and running now on ICS.
Won't be able to play around with it as much until I get home from work but thanks for mentioning it again.
Now to go and read the thread all the way through (kidding) well see if the problems he had are still occurring.
Thanks again guys.
For me, using Entropy's build made it easy to go to any other ICS rom for the Infuse- it is great as is or as a "stepping-stone" to other ICS builds. Glad it worked for you.
Yea man it was nice. I don't even need the other custom roms, this has everything I wanted.
And since it has a theme chooser, I'm good for life on the look of it.
I might try and customize my own stuff in the future but for now, all is right with my Infuse. I was going to get the Note but I got a brand new phone right here.

[Q] Phone application force closes after finishing a call...

Hello, all.
I have a T-Mobile Blaze 4G with rooted stock ROM (Gingerbread), flashed radio version T989UVMC6, manually debloated and dewizzed. I'm running Halo launcher and Busybox Free version 9.6.
Since almost the first day I've had this phone, it would occasionally force close the phone process, usually when hanging up the phone with the Bluetooth radio on and paired with an earpiece. It happened bone stock, rooted, after I changed the modem, whenever. It seemed to happen less often after I changed the modem. The process always starts back up, but the Bluetooth device connection and system sound controls are wonky (unusable) until the phone is rebooted.
The only thing that seems to stop it is running Zepplinrox's V6 Supercharger script. That, however, occasionally freezes the entire system when trying to open certain apps, requiring a reboot. I've run earch after search on this subject, and nobody else seems to have this problem. The only thing I haven't tried is wiping the whole thing and flashing a custom ICS or JB ROM. I tried Dark Knight ver. 8 and hated it pretty much instantly.
I have two questions. Number one; Will flashing a custom ROM fix this situation? I figure that this must be a problem with the crappy stock Samsung ROM. Number two; Which ROM is fully functional and stable? I'd really like to keep this phone dependable. I don't care about the latest and greatest funky cool features that are hit-or-miss at best. I just need dependable, fast and functional.
Since you have been having issues for a while, I would suggest starting fresh. With a few runs of black hole wipe from cwm. Add a run of the gremlin remover for extra cleanliness. Then a flash of the latest ICS rooted stock rom and kernel, for reliability.
Black hole wipe. http://forum.xda-developers.com/showthread.php?t=1721057
Gremlin remover, FSC http://forum.xda-developers.com/showthread.php?t=2218713
Uvmb1 ics ROM http://forum.xda-developers.com/showthread.php?t=2329081
Romman0 said:
Since you have been having issues for a while, I would suggest starting fresh. With a few runs of black hole wipe from cwm. Add a run of the gremlin remover for extra cleanliness. Then a flash of the latest ICS rooted stock rom and kernel, for reliability.
Black hole wipe. http://forum.xda-developers.com/showthread.php?t=1721057
Gremlin remover, FSC http://forum.xda-developers.com/showthread.php?t=2218713
Uvmb1 ics ROM http://forum.xda-developers.com/showthread.php?t=2329081
Click to expand...
Click to collapse
I'll definitely go for the rooted version! Does it matter what order in which the ROM and the kernel are flashed? Also, I take it from the name of the download link that I'll have to go through the process of de-bloating this thing again. S'okay, I actually enjoy that part, but I don't want to screw it up since I've not messed with anything newer than GB. Is there a good guide somewhere on the forum for apps that can be dumped safely? I know there was one for GB stock root.
Thanks for the response.
ionizd said:
I'll definitely go for the rooted version! Does it matter what order in which the ROM and the kernel are flashed? Also, I take it from the name of the download link that I'll have to go through the process of de-bloating this thing again. S'okay, I actually enjoy that part, but I don't want to screw it up since I've not messed with anything newer than GB. Is there a good guide somewhere on the forum for apps that can be dumped safely? I know there was one for GB stock root.
Thanks for the response.
Click to expand...
Click to collapse
Flash the ROM then the kernel, rewipe cache and davlik, then profit.
The most recent ICS debloating thread. http://forum.xda-developers.com/showthread.php?t=2183726&highlight=debloat
Romman0 said:
Flash the ROM then the kernel, rewipe cache and davlik, then profit.
The most recent ICS debloating thread. http://forum.xda-developers.com/showthread.php?t=2183726&highlight=debloat
Click to expand...
Click to collapse
A few more silly questions; Do I need GAPPS or is that just for CM? Aren't the CM 10 ICS nightlies fairly stable and relatively bug-free? I use CM7 on my Nook color and it's...okay... Just a few little annoying things pop up with that. To be honest, I like the idea of starting with a clean slate and adding stuff I like rather than pulling stuff out of the Samsung stock ROM, but the issues I've had with the Nook and CM7 have sort of scared me off. Your opinions?
ionizd said:
A few more silly questions; Do I need GAPPS or is that just for CM? Aren't the CM 10 ICS nightlies fairly stable and relatively bug-free? I use CM7 on my Nook color and it's...okay... Just a few little annoying things pop up with that. To be honest, I like the idea of starting with a clean slate and adding stuff I like rather than pulling stuff out of the Samsung stock ROM, but the issues I've had with the Nook and CM7 have sort of scared me off. Your opinions?
Click to expand...
Click to collapse
All the AOSP ROMs for the Blaze needs GAPPs. And yes. The latest CM10 nightly is stable. And you said CM10 ICS? CM9 is ICS and CM10 is Jellybean.
ionizd said:
A few more silly questions; Do I need GAPPS or is that just for CM? Aren't the CM 10 ICS nightlies fairly stable and relatively bug-free? I use CM7 on my Nook color and it's...okay... Just a few little annoying things pop up with that. To be honest, I like the idea of starting with a clean slate and adding stuff I like rather than pulling stuff out of the Samsung stock ROM, but the issues I've had with the Nook and CM7 have sort of scared me off. Your opinions?
Click to expand...
Click to collapse
The stock roms don't require gapps, but like Wolf said the cm10 jb variants do.
If your willing to use cm10 it is very stable. Just use the latest CM10 nightly and not the old stable version.
Here http://forum.xda-developers.com/showthread.php?t=1922935
The jb gapps 20121011 http://goo.im/gapps/gapps-jb-20121011-signed.zip
xWolf13 said:
All the AOSP ROMs for the Blaze needs GAPPs. And yes. The latest CM10 nightly is stable. And you said CM10 ICS? CM9 is ICS and CM10 is Jellybean.
Click to expand...
Click to collapse
Of course. I get a bit confused ever since people started talking about 10.1.
Okay, I went ahead and installed the stock rooted ROM with the stock kernel. Went through the debloating process (mostly, there are some apps that I'm not sure I can do without so they stay for now), and did some customizing. I'm seeing a bit more battery drain. Is this an issue with ICS or do I need to try another kernel or supercharge the phone? I also have this crazy issue with ROM Manager ver. 5.5.3.0. It tells me that there is an updated version of Clockworkmod Recovery, but it freezes when I try to flash from ROM Manager. Also, ROM Manager freezes when I try to reboot into Clockworkmod Recovery. Maybe I need to test a bit more before I mess with it any more.
**EDIT** Well, it looks as if my CWM recovery installation is corrupted. Can I reflash it without messing up my current ROM?
ionizd said:
Okay, I went ahead and installed the stock rooted ROM with the stock kernel. Went through the debloating process (mostly, there are some apps that I'm not sure I can do without so they stay for now), and did some customizing. I'm seeing a bit more battery drain. Is this an issue with ICS or do I need to try another kernel or supercharge the phone? I also have this crazy issue with ROM Manager ver. 5.5.3.0. It tells me that there is an updated version of Clockworkmod Recovery, but it freezes when I try to flash from ROM Manager. Also, ROM Manager freezes when I try to reboot into Clockworkmod Recovery. Maybe I need to test a bit more before I mess with it any more.
**EDIT** Well, it looks as if my CWM recovery installation is corrupted. Can I reflash it without messing up my current ROM?
Click to expand...
Click to collapse
Yes, with Odin, in the Dev forum
BTW, stay away from ROM Manager with our device. I've softbricked so many times because of it, it's ridiculous
jparnell8839 said:
Yes, with Odin, in the Dev forum
BTW, stay away from ROM Manager with our device. I've softbricked so many times because of it, it's ridiculous
Click to expand...
Click to collapse
Used this method http://forum.xda-developers.com/showthread.php?t=2011585, it worked well. Still have the battery drain issue, though. : /
ionizd said:
Used this method http://forum.xda-developers.com/showthread.php?t=2011585, it worked well. Still have the battery drain issue, though. : /
Click to expand...
Click to collapse
Since you have it setup, except for battery life. I would make a backup, then try a mod one at a time and see if any help. Also check the battery stats to see if anything of is seen. ICS will use more juice than GB, generally.
I would suggest Nos/direct injection, supercharger, or cross breeder. I would use one and see, then restore and try another.
http://forum.xda-developers.com/forumdisplay.php?f=565
Some time later...
I've been using the stock rooted ICS ROM since my last post, debloated and dewizzed of course, with Holo Launcher and T989UVMC6 baseband version flashed. Just over a month has passed, and I have good news!
I FREAKING LOVE THIS PHONE!!!
All of the force close and freezing issues have vanished, the phone's battery lasts almost as long as it did on GB, it's WAY more user friendly, and the phone is as fast as it ever was.
The bad news is that my wife got a GS4 and I lust after it now. : /
Thanks to everyone for their help!

Categories

Resources