Related
Hi,
My nexus one screen cracked (after falling from 3 feet high) and I need a replacement for the digitizer. I've found this one on dealextreme but I don't know if it will work properly. Has anyone tried it?
http://www.dealextreme.com/details.dx/sku.40671
I've also got this other option. A little more pricy
http://cgi.ebay.es/GENUINE-HTC-NEXU...ssories_RL&hash=item2eaeddd484#ht_2322wt_1137
by the way, can the "plastic opening tool" be replaced by a guitar pick?
thanks a lot
I can't help you with the digitizer but the guitar pick should work fine, it'll just be more difficult.
josealb said:
Hi,
My nexus one screen cracked (after falling from 3 feet high) and I need a replacement for the digitizer. I've found this one on dealextreme but I don't know if it will work properly. Has anyone tried it?
http://www.dealextreme.com/details.dx/sku.40671
I've also got this other option. A little more pricy
http://cgi.ebay.es/GENUINE-HTC-NEXU...ssories_RL&hash=item2eaeddd484#ht_2322wt_1137
by the way, can the "plastic opening tool" be replaced by a guitar pick?
thanks a lot
Click to expand...
Click to collapse
http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
it would be funny if this one is better than the stock one (ie no multitouch/calibration issues)
I have a hunch they are all the same, but please don't hold me to that.
I got the one from ebay, and it worked find with no calibration issues at all.
Note that this is not an easy swap at all. The way this thing is built is pretty incredible. I found someone who tore one down on youtube, and it was split into something like 30 separate videos, and used them to figure it out. I was so surprised and excited that it still worked when I was done that I nearly dropped it again
Note that the one that I got DID NOT come with adhesive. I had to fabricate my own using scotch double stick tape and a knife, and it wasnt perfect. When I was done it seemed to stick well, but there were a few places I could see the tape sticking out slightly, and I'm sure since the seal wasn't perfect that lint would have eventually worked its way inside.
(I ended up sending it off to HTC for an overheating issue and faulty lock button, and elected for the advance replacement, so I ended up with a shiny new phone minus the battery cover they made me keep)
I wish you luck in the repair, I hope you've got a light touch and some heavy patience.
have you tested that digitizer for the dreadful multitouch issues before sending it to htc?
i would love to replace mine, it's getting on my nerves :/
It's so hit-and-miss,I just bought one replacement in lightake.com,I received it today,and I put it on my digitizer.
I bought one off ebay.. went w/a us seller "wholesalegadgetparts" so i could get it quickly the digitizer works fine
as far as adhesive to hold it to the "black frame" i used a 3M double stick tape (cut into very slim strips) that was fairly thin (if its to thick, it'll pop out beyond the aluminum frame when assembled) also used a drop or two of super glue on the top portion..
what sucked was after i got everything back together, my lcd went bad (guess i was mashing it a bit to hard when getting them to stick to the frame) so I bought one off ebay for around $50, seller was "smartlaptopparts" shipped from cali, so quick turn around, and did appear to be "oem"
screen is beautiful now, overall was very happy w/the purchases
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Report it broken, pay $90 for a replacement through Asurion. Cheaper than $500, y'know?
Sent from my FroyoEris
You need to google for a eris digitizer.
LMGTFY
http://www.google.com/search?hl=en&...fai=CMBq5koWzTNrsN46EygTEha3rCQAAAKoEBU_Q0wbi
i think u can get them for like 40+ dollars off ebay
If you don't mind the long shipping times, you can get a digitizer + the entire housing together for around $60 on ebay. Doesn't seem like a bad deal to me.
#EDIT#
Zombie post . . . sorry about that. Need to remember to look at dates before replying.
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I just replace mine, and is wasn't too bad. There is videos on YouTube about how to do it. It took me about an hour, and the part costs about 40 bucks. If you need any help with it, feel free to email me [email protected]
Aaron
you can get one @ 49usd
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-g5-eris-p-2727.html
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I'm going through the same thing. Amazon has some digitizers for about $40. I decided to spend the extra $20 and get this instead
http://www.amazon.com/gp/product/B004F5CEDW
It's the whole casing. I didn't want to bother with stripping the digitzer off the frame which is glued on. With replacing the whole body, you just move the mainboard over and plug everything back in. At least this is my hope. I'll post here again when the thing actually arrives. I ordered it two weeks ago and it probably won't be here until mid March.
Good luck with whatever you decided to go with.
UPDATE. hmmm october was the post date. I guess this guy has long taken care of his problem
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
roscuthiii said:
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
Click to expand...
Click to collapse
There's Youtube videos for disassembly. I haven't watched them myself, but I know they exist, so they probably tell you what tools you need there. From what I remember hearing, just some small torx screwdrivers, or maybe some small phillips, too, but don't quote me on those.
Here is a link to the teardown video I followed.
http://www.youtube.com/watch?v=zHwm-32BI0w
The amazon link in my previous post is what I bought. It was the whole body. There are just screen replacements but I didn't want to mess with that because the digitizer is glued to the front piece. I didn't want to risk warping or breaking the front piece and completely screwing myself over. Anyway, what I bought came with the tools you need to perform the teardown and an extra screwdriver that was not needed.
I am glad I did this. However, it came with it's share of issues.
-The very top of my digitizer does not work. As a result, I can't pull down the notification bar. I can get to it through the menu button but it is annoying.
-I had to move the ear speaker and loudspeaker over. They were glued to some foam which was stuck/glued to the chassis. That foam absorbed the vibration. When my phone rings loud it is nasty because the speaker is bouncing around. I tried to cut some foam myself to replace what was stuck in the old case. It helped but it's not perfect.
-There are some rubber buffers? Isolators? Not sure what their called which also needed to be moved over form the old case.
-It took a month to ship to my house. After discovering these issues, I am kind've stuck with them because it would take a month to send the parts back and another month to get a replacement. By then I'll be due for a new phone.
So that's my experience of replacing the whole case.
Let me know if you have anymore questions.
Thanks for sharing your experience!
My pleasure. Glad to help out.
Sent from my Eris using XDA App
To add to this, because I'm sure there are others out there like me who intend to use their Eris until it gets run over, dropped in lava, drawn, quartered, and defecated upon . . .
I ordered the same replacement housing and digitizer as mentioned above, and had 2 small problems:
The housing I got had a nut in it that came loose, so that one of the corners wasn't able to reassemble properly.
There was something different in the new housing that caused the proximity sensor to function incorrectly.
For #1, I just used some super glue to weld the nut into place. This appears to have worked OK, but I fear that the point is weakened now and I will need to be very gentle if I disassemble the phone again.
For #2, The problem was that the housing was allowing bleed through inside the case from the proximity flasher to the light sensor, which caused the sensor to determine that there was something close to it when in fact there wasn't. I placed a small (oh so small) piece of electrical tape into the housing between where the IR flasher and sensor are located, and the problem was resolved.
If presented with the option of purchasing a new digitizer alone, or a new digitizer and housing together, follow groovel76's suggestion; it's well worth the time and money to go with the latter. The hassle of cleaning the old adhesive off of the new housing, and the risks of getting new adhesive in places where you don't want it far outweigh the cost of just getting a housing with adhesive pre-applied. I tried to do just a digitizer first, and ended up with a small amount of super glue (DO NOT RECOMMEND) getting on the new screen and the edge of the housing, as well as a screen that didn't seat properly because I didn't get quite all of the old bits out of the old housing. This resulted in dust getting under the screen and another crack when I attempted to fix what I'd screwed up the first time.
Between the availability of parts and ROMs for this phone, I see it being in my family for a LONG time yet.
Yes! Buy a digitizer online (most come with the tools you need such as the torx screwdrivers, mine did) and search for videos on youtube. That's what I did and it only cost me $37 for the digitizer and about 30 minutes of my time. And it worked perfectly as new when I got it all back together.
Has anyone seen a good take apart/repair guide for the Inspire4G. Just got digitizer replacement and cannot for the life of me figure out how to attach the ribbon cable without totally disassembling the phone. Hoping to avoid this.
If this is the wrong forum, please direct me to a better one rather than flaming me.
Thanks
Fairly certain that ifixit.com has a good teardown.
Sent from my SGH-T959 using XDA App
Thanks for the tip, but I find nothing for the DesireHD/Inspire4G there other than a total disassemble for the HD that I've already seen, but really did not help me. I just need to change to touch screen. I appreciate the try though.
Got it apart. And kinda back together. Apparently it is not a good idea to reuse the double sided tape that holds the LCD to the motherboard and the digitizer to the LCD. At least the phone works. Now, must order some proper adhesive tape and redo the whole thing.... Took me about 6 hours for whole breakdown and rebuild. Doesn't really seem to fit back together all that well though. Maybe I'll videotape my next breakdown.
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Jeffsmashkot said:
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Click to expand...
Click to collapse
Just so you know, I was a TOTAL noob in phone deconstruction. That being said, the old adhesive seemed quite sticky after i took it apart so I just reused it. Mistake number one. Once it was back together, i notice it slowly opening up like an accordion. The tape wasn't holding and the LCD, digitizer assembly started to rise up. I have since ordered some adhesive tape from the place I got the digitizer from. Definitely get the tape.
I did not bake it as in the video (i assume you watched the same one I did). I used an old spark plug gauge tool thingie to just cut through the tape. It was still really sticky so after i struggled to insert the digitizer ribbon cable, I just reused it. Don't do this. Get new tape.
I did have some plain old scotch double sided tape. I used it in one spot. Lesson: Don't use this stuff. Get new tape.
Did I mention that I think you should get new tape? All in all, it was quite laborious. I went really slowly so as not to brick it. When it was done the phone worked, but like I said the LCD raised up after a couple of minutes. The adhesive was not working anymore. At least I have gained confidence for the next take-apart. I can't believe i GOTTA go alll the way back to total break down. Aaaarrrgh.
So something like this should do the trick?
http://www.harborfreight.com/32-piece-sae-metric-feeler-gauge-32214.html
Thanks for the heads up... Where exactly do you recommend putting the tape? Does it just go on the black edges of the digitizer, or does it actually go on the surface of the LCD? Sorry if that's a noob question, but I haven't gotten the glass off and I want to make sure I have enough adhesive tape from the Ebay Vendor. Did you have any issues with reusing the mylar?
Sorry for the 1000 questions, I really don't want to shell out off contract prices for another phone...
Mylars were all reusable if removed carefully. I photographed every step so I would know what to put back where. Still waiting for my tape from Repairs Universe. The biggest two culprits are:
1] Tape holding back of LCD to the silver chassis frame and
2] Tape holding SIM FPC to the main board.
You might also tape the PCB cover to the upper board, mine was loose after rebuild.
That I believe that is it for the major tape requirements. Of course the digitizer needs to be taped to the LCD. I'm curious, though, the tape framing the LCD holding the digitizer seemed to have some thickness to it. Almost like foam rubber, quite thin, but thicker than regular cellophane tape.
Good luck. Let me know if you have any tips after your attempt.
Got the tape. Retried to rebuild with new OEM tape. Same result. The phone when completed expands like an accordion. The digitizer/LCD assembly does not stay stick to whatever is under it. I know when to admit defeat. Looks like I'm shelling out 500 for another phone. At least I have spare parts!
yeah i was going to do my screen myself till i seen the tear down & then called afew places around here that does screen replacements and said NO we won't touch the Inspire, i spent the money and let HTC fix it. was worth it they replaced the whole shell not just the screen ... IE lcd / digitizer / Outer case that was scratched and dented... basically a new phone with the guts out of my phone
I attempted to do this and let me just say that I too now have spare parts. I purchased a phone off of ebay. I didn't realize the no contract price went up to around 500.00 I should have gone directly to HTC. Live and learn...
I will be in possession of an HTC Inspire for testing purposes that also has a cracked screen. Not sure how bad it is but I was planning on just replacing the display for learning purposes. However it seems that it may not be worth the time spent.
If I do decide to give it a go I'll post my results here. First thing is to acquire new tape. Did you all purchase it locally or did you buy the adhesive online?
YouTube has lots of videos. Best to watch a few a see the best way. If you are scared to break it best you send it in for repair instead. Get a digitizer and screen combo.
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
My recommendation is to buy a case that covers the phone completely, you'll forget about it...
I have a Diztronic case arriving Wednesday, but need to use it with my car dock without the case. It's not a big deal, but given that its trivial to do (except for finding the right paint) I would like to do it.
Well you're definately right, a simple cosmetic fix would be best, here's your part...
Not sure what to tell you man, maybe someone will chime in with some info or similar experience... It's just cheap plastic...
I found this on eHow:
How to Repair Chipped Plastic
You can actually get the bezel separately for $17, but the screen needs to be heated to come off - not easy. Plastic repair is easier (as you pointed out) but a good job requires good paint. Hopefully someone has already tried.
Thanks for the suggestions.
I remembered this thread from cappy section... With people making modifications to their housings... possibly you can msg one of them...
dblevitan said:
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
Click to expand...
Click to collapse
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
It's all kitted up into one part... the solution is a $250 front part of the phone...
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
thanks for repeating exactly what i said an hour before...
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
Make it easier on yourself next time, kid. Just copy/paste...
Sent from my rooted Mayan calendar
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
I looked in some drug stores for some nail polish that would match, but never found anything. It's currently in a case, so I rarely notice it. Maybe sometime when I have energy, I'll try to replace the bezel, but not for now.
Well I cracked the glass on my Galaxy S3 and there is some other superficial damage around the bezel. As I am going to be getting another phone shortly anyway I was thinking about this problem and how I could get my phone as possible to "new." After consideration I'm leaning to using an automotive paint/scratch repair pen as opposed to nailpolish. Depending on how it turns out, I'll upload my process, materials, and pictures.
Ive cracked my screen and ive found i can buy a new screen and lcd for 169.99. or i can buy just the over glass for $20. I heard you can use a heat gun to seperate the glass and the lcd. Has anyone done this and can tell me if it works?
Sent from my SGH-I727R using xda app-developers app
Mostly likely the digitizer will get destroyed in the process. Buy the complete unit.
Someone said a few days ago he only replaced the glass but he had to break it in order to separate it, use the search I bet you'll find it quickly. If you can afford it take the whole thing, less chances of screwing up your phone, and you could always keep the old lcd for a test run with a glass only or in case you somehow manage to crack it again.
Still I'd suggest buying a screen protector once you fix your screen, costs less, barely noticeable and saves a whole lot of money and hassle.
kishke said:
Someone said a few days ago he only replaced the glass but he had to break it in order to separate it, use the search I bet you'll find it quickly. If you can afford it take the whole thing, less chances of screwing up your phone, and you could always keep the old lcd for a test run with a glass only or in case you somehow manage to crack it again.
Still I'd suggest buying a screen protector once you fix your screen, costs less, barely noticeable and saves a whole lot of money and hassle.
Click to expand...
Click to collapse
This. I cracked my screen and bought an entire new one for $160 via ebay. It took 10 minutes to take apart and install the new one and be back up and running. I also bought the Otterbox Defender, honestly...works like a charm. It's durable, nice, feels good and it doesn't feel as bulky as it looks. The only down fall about a case with a screen protector is that the Galaxy series has a screen that goes all the way to the edge of the phone (like most modern phones now) so hitting stuff on the VERY edge of the screen is more difficult because of the raised case.
Buy the screen and a protector and if you are still curious, buy the replacement glass for your broken screen and try it. Worst case, you're out 20 bucks and have a completely broken screen (would be out the other $160 for the new screen you'd have to buy if you mess up any way) or best case, you're out $20 bucks but have a new screen incase you ever break it again.
Unscrew the 7 screws on the back (one is above the sim slot, keep it separate as it's a different size) and once you take the back piece off, there's one small black screw holding the board to the screen. The phone is 3 pieces, screen, board and back piece, it's extremely simple. Just pop all the circuit things with your nail or whatever (there's like 6 total). You have to pry your headphone jack off as it's glued unless your new screen comes with one...doubt it.
someone posted they got sammy to replace it for 189, call sammy up and see what they say, i think thats a good price
Forget Glass
OFWGKTADGAF said:
Ive cracked my screen and ive found i can buy a new screen and lcd for 169.99. or i can buy just the over glass for $20. I heard you can use a heat gun to seperate the glass and the lcd. Has anyone done this and can tell me if it works?
Sent from my SGH-I727R using xda app-developers app
Click to expand...
Click to collapse
I repair phones and have replaced Lcd/digi assembly on both I727 and T989. No way you get that apart without busting the exiting assembly up. The cheapest part can be order via Ebay from China and you'll have to wait about two weeks for part. Or there's the company I used in San Fancisco at gounlock dot com that has it listed at $154 I believe. They have a listing on ebay under SkyStarTrade and I offered em $148 including shipping and the took it. I had the part in 3 days. Would highly recommend!!!!!!
I just got off the phone with Sammi Friday. The Rep quoted me $158 to replace the glass. So if they mess up the digitizer is on them. Cheaper than I was able to find the combo anywhere on line. So tomorrow my phone heads back to Sammi. I'll let you know in about three weeks how the service was and whether they honored their quote.
And exactly 8 days from the date that I shipped it to Sammi I have a my phone back. They replaced the LCD, bezel and glass for $158 as quoted. Not only that but they paid all shipping and used UPS 2nd day air both ways. And I'm still under warranty by having them take care of it. All in all couldn't be happier with the service. So if anyone needs the glass fixed my vote would go to Sammi.