Ive cracked my screen and ive found i can buy a new screen and lcd for 169.99. or i can buy just the over glass for $20. I heard you can use a heat gun to seperate the glass and the lcd. Has anyone done this and can tell me if it works?
Sent from my SGH-I727R using xda app-developers app
Mostly likely the digitizer will get destroyed in the process. Buy the complete unit.
Someone said a few days ago he only replaced the glass but he had to break it in order to separate it, use the search I bet you'll find it quickly. If you can afford it take the whole thing, less chances of screwing up your phone, and you could always keep the old lcd for a test run with a glass only or in case you somehow manage to crack it again.
Still I'd suggest buying a screen protector once you fix your screen, costs less, barely noticeable and saves a whole lot of money and hassle.
kishke said:
Someone said a few days ago he only replaced the glass but he had to break it in order to separate it, use the search I bet you'll find it quickly. If you can afford it take the whole thing, less chances of screwing up your phone, and you could always keep the old lcd for a test run with a glass only or in case you somehow manage to crack it again.
Still I'd suggest buying a screen protector once you fix your screen, costs less, barely noticeable and saves a whole lot of money and hassle.
Click to expand...
Click to collapse
This. I cracked my screen and bought an entire new one for $160 via ebay. It took 10 minutes to take apart and install the new one and be back up and running. I also bought the Otterbox Defender, honestly...works like a charm. It's durable, nice, feels good and it doesn't feel as bulky as it looks. The only down fall about a case with a screen protector is that the Galaxy series has a screen that goes all the way to the edge of the phone (like most modern phones now) so hitting stuff on the VERY edge of the screen is more difficult because of the raised case.
Buy the screen and a protector and if you are still curious, buy the replacement glass for your broken screen and try it. Worst case, you're out 20 bucks and have a completely broken screen (would be out the other $160 for the new screen you'd have to buy if you mess up any way) or best case, you're out $20 bucks but have a new screen incase you ever break it again.
Unscrew the 7 screws on the back (one is above the sim slot, keep it separate as it's a different size) and once you take the back piece off, there's one small black screw holding the board to the screen. The phone is 3 pieces, screen, board and back piece, it's extremely simple. Just pop all the circuit things with your nail or whatever (there's like 6 total). You have to pry your headphone jack off as it's glued unless your new screen comes with one...doubt it.
someone posted they got sammy to replace it for 189, call sammy up and see what they say, i think thats a good price
Forget Glass
OFWGKTADGAF said:
Ive cracked my screen and ive found i can buy a new screen and lcd for 169.99. or i can buy just the over glass for $20. I heard you can use a heat gun to seperate the glass and the lcd. Has anyone done this and can tell me if it works?
Sent from my SGH-I727R using xda app-developers app
Click to expand...
Click to collapse
I repair phones and have replaced Lcd/digi assembly on both I727 and T989. No way you get that apart without busting the exiting assembly up. The cheapest part can be order via Ebay from China and you'll have to wait about two weeks for part. Or there's the company I used in San Fancisco at gounlock dot com that has it listed at $154 I believe. They have a listing on ebay under SkyStarTrade and I offered em $148 including shipping and the took it. I had the part in 3 days. Would highly recommend!!!!!!
I just got off the phone with Sammi Friday. The Rep quoted me $158 to replace the glass. So if they mess up the digitizer is on them. Cheaper than I was able to find the combo anywhere on line. So tomorrow my phone heads back to Sammi. I'll let you know in about three weeks how the service was and whether they honored their quote.
And exactly 8 days from the date that I shipped it to Sammi I have a my phone back. They replaced the LCD, bezel and glass for $158 as quoted. Not only that but they paid all shipping and used UPS 2nd day air both ways. And I'm still under warranty by having them take care of it. All in all couldn't be happier with the service. So if anyone needs the glass fixed my vote would go to Sammi.
Related
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Report it broken, pay $90 for a replacement through Asurion. Cheaper than $500, y'know?
Sent from my FroyoEris
You need to google for a eris digitizer.
LMGTFY
http://www.google.com/search?hl=en&...fai=CMBq5koWzTNrsN46EygTEha3rCQAAAKoEBU_Q0wbi
i think u can get them for like 40+ dollars off ebay
If you don't mind the long shipping times, you can get a digitizer + the entire housing together for around $60 on ebay. Doesn't seem like a bad deal to me.
#EDIT#
Zombie post . . . sorry about that. Need to remember to look at dates before replying.
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I just replace mine, and is wasn't too bad. There is videos on YouTube about how to do it. It took me about an hour, and the part costs about 40 bucks. If you need any help with it, feel free to email me [email protected]
Aaron
you can get one @ 49usd
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-g5-eris-p-2727.html
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I'm going through the same thing. Amazon has some digitizers for about $40. I decided to spend the extra $20 and get this instead
http://www.amazon.com/gp/product/B004F5CEDW
It's the whole casing. I didn't want to bother with stripping the digitzer off the frame which is glued on. With replacing the whole body, you just move the mainboard over and plug everything back in. At least this is my hope. I'll post here again when the thing actually arrives. I ordered it two weeks ago and it probably won't be here until mid March.
Good luck with whatever you decided to go with.
UPDATE. hmmm october was the post date. I guess this guy has long taken care of his problem
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
roscuthiii said:
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
Click to expand...
Click to collapse
There's Youtube videos for disassembly. I haven't watched them myself, but I know they exist, so they probably tell you what tools you need there. From what I remember hearing, just some small torx screwdrivers, or maybe some small phillips, too, but don't quote me on those.
Here is a link to the teardown video I followed.
http://www.youtube.com/watch?v=zHwm-32BI0w
The amazon link in my previous post is what I bought. It was the whole body. There are just screen replacements but I didn't want to mess with that because the digitizer is glued to the front piece. I didn't want to risk warping or breaking the front piece and completely screwing myself over. Anyway, what I bought came with the tools you need to perform the teardown and an extra screwdriver that was not needed.
I am glad I did this. However, it came with it's share of issues.
-The very top of my digitizer does not work. As a result, I can't pull down the notification bar. I can get to it through the menu button but it is annoying.
-I had to move the ear speaker and loudspeaker over. They were glued to some foam which was stuck/glued to the chassis. That foam absorbed the vibration. When my phone rings loud it is nasty because the speaker is bouncing around. I tried to cut some foam myself to replace what was stuck in the old case. It helped but it's not perfect.
-There are some rubber buffers? Isolators? Not sure what their called which also needed to be moved over form the old case.
-It took a month to ship to my house. After discovering these issues, I am kind've stuck with them because it would take a month to send the parts back and another month to get a replacement. By then I'll be due for a new phone.
So that's my experience of replacing the whole case.
Let me know if you have anymore questions.
Thanks for sharing your experience!
My pleasure. Glad to help out.
Sent from my Eris using XDA App
To add to this, because I'm sure there are others out there like me who intend to use their Eris until it gets run over, dropped in lava, drawn, quartered, and defecated upon . . .
I ordered the same replacement housing and digitizer as mentioned above, and had 2 small problems:
The housing I got had a nut in it that came loose, so that one of the corners wasn't able to reassemble properly.
There was something different in the new housing that caused the proximity sensor to function incorrectly.
For #1, I just used some super glue to weld the nut into place. This appears to have worked OK, but I fear that the point is weakened now and I will need to be very gentle if I disassemble the phone again.
For #2, The problem was that the housing was allowing bleed through inside the case from the proximity flasher to the light sensor, which caused the sensor to determine that there was something close to it when in fact there wasn't. I placed a small (oh so small) piece of electrical tape into the housing between where the IR flasher and sensor are located, and the problem was resolved.
If presented with the option of purchasing a new digitizer alone, or a new digitizer and housing together, follow groovel76's suggestion; it's well worth the time and money to go with the latter. The hassle of cleaning the old adhesive off of the new housing, and the risks of getting new adhesive in places where you don't want it far outweigh the cost of just getting a housing with adhesive pre-applied. I tried to do just a digitizer first, and ended up with a small amount of super glue (DO NOT RECOMMEND) getting on the new screen and the edge of the housing, as well as a screen that didn't seat properly because I didn't get quite all of the old bits out of the old housing. This resulted in dust getting under the screen and another crack when I attempted to fix what I'd screwed up the first time.
Between the availability of parts and ROMs for this phone, I see it being in my family for a LONG time yet.
Yes! Buy a digitizer online (most come with the tools you need such as the torx screwdrivers, mine did) and search for videos on youtube. That's what I did and it only cost me $37 for the digitizer and about 30 minutes of my time. And it worked perfectly as new when I got it all back together.
Has Anyone else cracked a screen on their infuse yet and replaced it? The only parts I can find are the whole assembly of the LCD, digitizer, etc and its like $200. When I had an iphone i replaced the screen/glass part for about $30.
I looked at buying a eBay phone with cracked screen, by the time you add on 180-200$ for the screen it wasn't worth while. Cheapest I found was ~180$
because of the way our phones are constructed, it makes the repair much more expensive. If I'm not mistaken, the iphone's glass and lcd aren't bonded together, and don't have the digitizer attached. The bonded screen and glass with digitizer is much more expensive. you can find the whole thing for about 130.
What I did when I cracked my screen was, I just put the phone with cracked screen up on ebay and got 117 for it. Then I just bought a used one off craigslist. They got for like 200-250 in my area. so its like a 100 dollar repair
that really sucks samsung made such a stupid design. I really like this phone and was enjoying it alot more than my iphone.
Are there any androids without such a bad design for the screen?
Gorilla Glass is Da Bomb
i found out on ebay have only glass to sell but should be make sure u r able to separate d lcd n glass!!!its cheap about $20 only...my lovely infuse broken glass also....now im waitin for d glass n replace it....good luck for me ^^
Please advise if the glass replacement will be successful.
I had the glass broken and replaced whole screen assembly (about $200).
It was very unpractical.
Break??? Gorilla glass??? Say it ain't so....mine has been thru hell, up against walls, dropped our car doors, ect...ect...not even a scratch....
Sent from my SAMSUNG-SGH-I997 using xda premium
dman3285 said:
Break??? Gorilla glass??? Say it ain't so....mine has been thru hell, up against walls, dropped our car doors, ect...ect...not even a scratch....
Click to expand...
Click to collapse
You shouldn't have said it...I would be extra careful now!!
My Infuse has held up well also but if it's the same screen (gorilla glss) as an iPhone it is definitely possible to crack...my son has broken 2 iPhone screens from drops without case.
andrawer said:
You shouldn't have said it...I would be extra careful now!!
My Infuse has held up well also but if it's the same screen (gorilla glss) as an iPhone it is definitely possible to crack...my son has broken 2 iPhone screens from drops without case.
Click to expand...
Click to collapse
gorilla glass is far different from the iphone screen ._.
youtube.com/watch?v=1WS5I0SpL6c
I'm not sure if they're a legit company :/
That's why I buy all my phones from Bestbuy and get the service plan for $10.59 a month. All that's covered and like every 6-7 months I go get another Infuse (refurbished) for free just because. Lol
Sent from my SAMSUNG-SGH-I997 using XDA App
Gorilla glass can break. It really all depeneds on the angle of impact. I dropped my phone exactly face down on tile it didn't bounce just smacked the floor dead on. I was expecting the worse but it was fine.
Sent from my SAMSUNG-SGH-I997 using xda premium
I broke mine, don't really know how but it was hardly noticeable. it still bothered me so I replaced it. well I shouldn't have cuz the replacement was defective. ugh. I don't recommend the repair but would be willing to do it for a small fee. the screen is bonded to a metal frame (magnesium maybe, its light even for aluminum but I didn't spark test it) and pretty much is difficult not to destroy in removal. hence all the parts that come with it. though I think now that I know what to expect I could do the repair without an issue. if you decide to do it your self pm me. ill let you know what you will run into.
Cracked the corner of my screen. This really sucks.. I paid only 150 for the phone, but will have to spend 180 to replace it. Hopefully the price will go down?
I dropped mine on gravel and it must have hit a rock just right, cracked it pretty good. Unlike my wife's iphone (which had the same thing happen but at a different location), the android touch screen still works just fine.
funyunfails said:
Has Anyone else cracked a screen on their infuse yet and replaced it? The only parts I can find are the whole assembly of the LCD, digitizer, etc and its like $200. When I had an iphone i replaced the screen/glass part for about $30.
Click to expand...
Click to collapse
Just spoke with Samsung at 1-888-987-4357.
They will repair for $155.
Seems like the way to go if needing repair.
basically my front glass lens got a crack (LCD is fine) and my back housing has been worn out. If any one willing to donate a dead Captivate will really appreciate and will pay the delivery cost to Middle east.
If nobody helps you out, care to provide your phone for my project?
amazon.com, search captivate digitizer. if not on there, Google it. you can buy replacement parts.
Sent from my I897
http://www.amazon.com/Samsung-Galax...T4MI/ref=sr_1_2?ie=UTF8&qid=1329961487&sr=8-2
Here you go. And why in god name does it cost that much? This phone is an antique at this point! $124 for a screen? Perhaps thats why the OP was hoping someone might have a dead one, probably cheaper to buy a broken captivate than buy a new screen!
I know it seems late, but get a screen protector, it helps your fingers glide over the cracks without getting cut. If you already have one, buy a new one, i know atfer a while it clouds the screen, and that plus the cracks will make you hate the phone.
A nice new clear screen protector will let you be able to tolerate it for a while longer....
I know what im talking about.....
heres my cracked cappy... it still worked too! i used it like this for a good 4 months or more, then bought a used one off a co-worker for 100 bucks.
http://dl.dropbox.com/u/19201431/Images/cracked%20to%20****%20but%20works.jpg
I bought a replacement "glass only" off ebay for 9 bucks, but upon more research and watching a bunch of youtube videos, i found out the LCD digitizer and glass are bonded together, so there was no way of removing the old glass without damaging the LCD.
I installed the replacement glass over-top of the cracked glass, it helps see past some of the cracks, and stops my fingers from getting sliced by the sharp edges of the cracks. its sometimes hard to activate the 4 bottom capacitive buttons through the double glass, but I only use that phone for testing and skype.
Any luck repairing it?
Well, I knew the time would come, I shouldn't be so picky on cases. I had my phone in my lap, hopped out of the car and heard my phone drop from my lap. Totally forgot it was there. One corner impact and it cracked my screen, which is disappointing because I drop my iPhone all the time and nothing happens to it. But, at least it's not the whole screen that's shattered, might even be a waste to replace it. The screen is responsive still.
With that said, anyone know where I can get a replacement screen or should I have a "professional" do it?
I'm looking at this:
http://www.ebay.com/itm/LG-Google-N...e_Replacement_Parts_Tools&hash=item233373ec1c
That way there's no damage to the frame.
well yeah i want to know that too and how much it cost me to replace the screen
Sent from my Nexus 5 using Tapatalk
@dinggus
Ebay link looks OK. I guess you can replace screen yourself, if you have "straight" hands. Nexus 5 Teardown should helps you.
BTW, more Parts for Nexus 5.
Well, if you are going to try this one yourself, it's one of the "easier" ones. As long as you get the LCD assembly and frame that is already put together. On eBay, there are some vendors selling the the assembly + frame for $135. No really crazy tools are needed. Shouldn't be anything too catastrophic happen since you are changing the whole front of the phone. If you were trying to separate the top glass, I'd definitely advise against if you aren't a pro. If you absolutely don't feel comfortable with doing it and can be without the phone for a few days, then feel free to PM me, and we can discuss other options.
If you have steady hands, enough patience and some previous experience in disassembling phones (youtube could help a lot), it shouldn't turn out to be quite a big challenge.
I would advise though in some attention taking off the rear cover (it's not difficult, but if you apply too much pressure you might end up bending or breaking it). Same goes with the battery, which is attached to the back of the screen with some adhesive. Use a plastic tool for this, and try to peel it off with a strong and steady hand. Once you do that, it's only a few screws.
I think LG would fix it for $150 so $135 to fix it yourself eh. Unless you want the accomplishment, but I have never ventured into replacing a cracked screen.
Just got off the phone with LG, they said they can't price over the phone, they have to have a tech see the phone and they'll call with a quote. So, 2 weeks without a phone just to get a quote and maybe repaired if I want to spend that kind of money.
I am 80% positive that I have viewed a few post of them charging $150 for screen replacement. You aught to check in the thread "who dropped it" the answer might be there. Its in general. Hard to find with xda app.
Sent from The Deathstar
Well, turns out once the screen is cracked it cracks easier now. As of now, the phone starts clicking on random things when the screen is touched.
I'm debating to either buy a new one and sell this one, should come out to the same price as buying a replacement screen once the cracked phone is sold.
What would you guys suggest? I can't send it in to LG as I need my phone and replacement screen + front housing is $200 to replace myself or $220 to replace by a professional.
I'm looking at this: http://www.etradesupply.com/lg-nexus-5-lcd-screen-and-digitizer-assembly-with-frame.html
It seems to come with majority of everything and I just need to transfer over the antenna wires, motherboard and battery.
or
http://www.repairsuniverse.com/lg-g...exus 5 Screen with Frame&utm_campaign=LE55ONS
I'll have to transfer over everything, which they have a tutorial - https://www.youtube.com/watch?v=OPuCmfhzgbg - which makes me nervous seeing this.
dinggus said:
Well, turns out once the screen is cracked it cracks easier now. As of now, the phone starts clicking on random things when the screen is touched.
I'm debating to either buy a new one and sell this one, should come out to the same price as buying a replacement screen once the cracked phone is sold.
What would you guys suggest? I can't send it in to LG as I need my phone and replacement screen + front housing is $200 to replace myself or $220 to replace by a professional.
Can't you try the below? Quite easy to dis-assemble the phone, steady hands and proper screw driver + torx driver, use a hairdryer to warm up the glue connecting the battery + LCD to the digitizer
Sorry can't post external links to XDA due to post counter search Ebay for "Frame-LCD-Display-Touch-Digitizer-Screen-for-LG-Google-Nexus-5-D820-D821" results are between $108-$120 ...
Click to expand...
Click to collapse
I dropped my nexus 5 getting out if the car and now the glass screen is shattered at a corner. The digitizer seems fin and every where on the screen is responsive.
So I was wondering if there were a place i can order just the LCD screen and without the digitizer/housing.
Sent from my Nexus 5 using Tapatalk
The digitizer and LCD are fused together.. You need to replace them both!
If I were you, I would send it to a LG Service outlet and let them replace it. The ones you order online may or may not work + you need to do everything yourself. However, if you're good at it, then ordering online will certainly save you few bucks!
As the phone is only $350. Spending anything more then $150 won't do it for me as I'd rather buy a new or used phone. I was hoping there was a place to get just the glass part.
Sent from my Nexus 5 using Tapatalk
The only way that makes sense is if you can get a phone that is as good or better than the n5 for $150 or less.
I dropped mine, three days after it was delivered, no case as it had not yet arrived
The corner of the case was dented and the screen shattered but still fully useabIe.
I was wary about knock off spare parts and my skill with glue and tape if I went DIY so I sent mine in to LG service centre. The cost was £114.67 including Special delivery both ways ( Insured, tracked, next day delivery).
The worst part was the waiting, it took them 10 days to give me an estimate of he cost and three more days to get it back to me. It is good as new now and still has warranty.
I've just checked, thats about $190! So I uderstand your dilemma.
B
LReyes66 said:
I dropped my nexus 5 getting out if the car and now the glass screen is shattered at a corner. The digitizer seems fin and every where on the screen is responsive.
So I was wondering if there were a place i can order just the LCD screen and without the digitizer/housing.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This is Elena from parts4repair.com,we can offer only oem glass for you,(the original one is out of stock now),and I am a new user,so i can't offer the link for you,maybe you will be interested to visit our website,or contact with us by [email protected].
Please notice that:the outer glass lens is without any function of digitizer or display. and only glass replacement is a professional job, and special tools are required, too. By the way, glass and the screen are bonded together, so both separating them and gluing them together are difficult job. Please sure you can do it before order.
Hope can help you,Thanks.
Never try to replace just the glass. You'd need loca glue & a uv light to cure it. The glue could get into other components and totally ruin your phone. And even if by a small chance you can pull it off, it will never be 100 percent. Always replace the whole assembly. - coming from somebody who has tried to replace just the glass.
Lokke9191 said:
Never try to replace just the glass. You'd need loca glue & a uv light to cure it. The glue could get into other components and totally ruin your phone. And even if by a small chance you can pull it off, it will never be 100 percent. Always replace the whole assembly. - coming from somebody who has tried to replace just the glass.
Click to expand...
Click to collapse
you are right,it is very hard to get it done right by people who mostly have no experience,so please think twice before do it if it is first time for you to change it.And we also can offer LG N5 D820 a full screen assembly(front housing cover + digitizer + lcd screen+glass).
I used my old front housing and removed the old LCD and Glass. It was very difficult but it came out working 100%. This has been the 3rd display I have fixed and so far the most difficult. The rest of the parts were really easy though. Just separating the LCD and housing was painstakingly time consuming and dangerous.
Sent from my Nexus 5 using Tapatalk