i aleary set cpu to max 1.8ghz and min 1.6ghz how to st it?? i did try to set it too 1.8mina nd max but my phone hangs and powerd-off!!! how to set it?!
Hey. I wouldnt recommend your current srtup at all unless you want horrible battery life and massive amounts of heat however i sont have an answer for your predicament, try using another app with the same function?
Sent from my GT-I9100 using XDA
listen to me. set it like I say:
max frequency 1512
min frequency 384
governor interactive
go to profiles and create a new profile. set:
screen off
max 432
min 192
governor conservative
priority 100
this way you have a good performing phone and with screen off a power saving profile. with this configuration I have 15 hours battery (enough for a day) of mid use...with data activated and live wallpaper
Nice stats ! I'm going to try that!
Sent from my Sensation 4G using xda premium
Some phones can handle higher frequency then others if your phone can't go over 1.8 well there is nothing you can do..
Swyped From My Sensation.
I SET IT TO this But anyway i don't care battery life
Dont OC much
dude that's friggin gih frequency's. Dont push it too hard, it'll do no good to the processor. Besides, what do you need that kind of power for ? Runing Crysis ?
Related
Hey so I was wondering what an appropriate level for min and max were on setcpu and I was looking for pretty decent battery life. Enough to get me through the day.
Sent from my HTC Glacier using XDA Premium App
To be honest, I have mine set to 806 max, 245 min ondemand. The 806 provides plenty for everyday tasks, and I can oc up to 1.7ghz on the rare occasion I play a 3D game.
Sent from my HTC Glacier using XDA App
Saad1115 said:
Hey so I was wondering what an appropriate level for min and max were on setcpu and I was looking for pretty decent battery life. Enough to get me through the day.
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
i run 1209max 368min...i get decent life as well...for example i just charged my phone lastnight after getting 1 day 16 hours on a single charge and that was with moderate use
plus everyones phone is going to be different....what works for me isnt always going to work for you and vice versa
Mine is more directed toward battery life, but there is alittle OC in there and it lasts me almost 2 days. (with gps on)
screen off priority 100: 368 max, 245 min
charging priority 90: 1516 max, 245 min
battery < 27% priority 70: 368 max,245 min
battery < 60% priority 60: 768 max, 245 min
battery < 70% priority 50: 1113 max, 245 min
default is 1209 max, 245 min
hope this helps!
Saad1115 said:
Hey so I was wondering what an appropriate level for min and max were on setcpu and I was looking for pretty decent battery life. Enough to get me through the day.
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Unless you are trying to impress your friends with crazy high quadrant scores, the STOCK or lower frequency will give you better battery life as well as easier on the CPU.
personally i keep mine @ 1018/238 via the native governor in the Cyanogen settings.
Unless i am playing some kind of heavy 3d game I keep mine on the interactive gov clocked @ 768/245
I keep mine at 1209 max 245 min with moderate use I can get up to a day & a half without charging.....
Iced glacier mytouch 4g white
Recovery-clockwork mod
There is no such thing as the best settings for OCd phones. Every chipset is different and will react differently to the load you place on it. The only thing that is certain is that on ondemand and interactive governors, having too big of a spread between max and min, will freeze your phone. Find what works for you and stick to it
I have at max: 1200 MHz ,at min 83 and in typeerformance, are these values corecct or wrong for a custom rom?
-Greeting-
PD:Andro's Rom (3 days for release)
Yes, or no, because you need a screen off profile or your battery life will be damn short.
I think this should be in the general section and i recommend using the conservative governor over the performance since conservative goes to the minimum frequency when phone is not being used i.e. when screen is off. This is best for performance since it automatically goes to the maximum frequency when screen is on and when screen is off it goes to the minimum which is good for battery.
1200 is too high....
It will damage your battery....
I use 100 MHz to 800 MHz....
Its average and most of the users use the same....
[email protected] said:
1200 is too high....
It will damage your battery....
I use 100 MHz to 800 MHz....
Its average and most of the users use the same....
Click to expand...
Click to collapse
I think that is a very wise thing to do. I shall see how my phone runs at that speed.
Oks.thx.
Now:
MAX:800
MIN:83
Type: Conservative.
Are these values correctly now?
-Greettings-
AndroKite said:
Oks.thx.
Now:
MAX:800
MIN:83
Type: Conservative.
Are these values correctly now?
-Greettings-
Click to expand...
Click to collapse
Yeah its good.... ^_^
Happy to help..... ^_^
My batery temp is 27º - 28º celcius,is a good temp or maybe it can be danger for my battery?
-Grettings-
AndroKite said:
My batery temp is 27º - 28º celcius,is a good temp or maybe it can be danger for my battery?
-Grettings-
Click to expand...
Click to collapse
Aslong as its not 35+ degrees you are ok
Sent from my GT-I5800 using XDA App
Lol! Did you make a mistake by posting this question in the development section? Suppose to put at general section.
Accidentally sent from my ultra speedy SG3 phone using tapatalk.
P.S If my post have helped you, don't feel shy to click the thanks button
That frecuency will eat your battery.
I use my SetCPU at frecuencies 400-800Mhz, and use profiles for screen off (83-400Mhz), battery <20% (200-600Mhz), time (2am-6am) (83-83Mhz powersave)
always on demand (except time profile)
Greetings
My config is
Main 400-800 Mhz Ondemand Set on boot
Profiles
Temp >45°C 200-500 Mhz priority 100 Ondemand
time 2am-6am 83-83 Mhz priority 95 powesave
screen off 83-500 Mhz priority 90 Ondemand
Battery <20% 200-600 Mhz priority 80 Ondemand
I have g3mod 2.0 OC kernel
Greetings
I just use basic settings, no profiles or anything. Look in my signature.
I may add a few profiles after my lil bro is finished playing games on my phone.
My battery temp is 39 degrees Celsius is it that a good tempeture?
anything between 83 and 800 would work like charm and enough for day to day tasks..use conservative governor..set profile for screen off and on call..
I am using:
Rom: Insertcoin
Kernel: Bricked 1.5
Could you give me some tips to setup the best way setcpu.
I've seen some guys mentioning setting lowest frequency to around 400 and etc. and I don't know why. Could you give me some advice on setting up the program correctly.
Hi, I personally set the lowest frequency to somewhere around the 500mhz and smaller and set the govenor to ondemand as this will only use the the speed of your kernel when its needed thus, will use less battery.
Why around 500mhz and not 194. And will 5 sec refresh on the widget drain much battery? It's now on passive because I don't want to loose battery on bull****.
SsBloodY said:
Why around 500mhz and not 194. And will 5 sec refresh on the widget drain much battery? It's now on passive because I don't want to loose battery on bull****.
Click to expand...
Click to collapse
I put at 500mhz because sometimes the phone may slow down on its own and I don't think that setting the refresh rate to 5sec will steal much battery because its only a small widget
Any more opinions? Would be nice
Don't set it to 500 minimum. This will lock the phone to at least 500 mhz at all times and will cause substantial battery drain.
Go with 192 minimum or the next step up.
Sdobron said:
Don't set it to 500 minimum. This will lock the phone to at least 500 mhz at all times and will cause substantial battery drain.
Go with 192 minimum or the next step up.
Click to expand...
Click to collapse
+1 on that.
My personal settings (most of the time) are:
Screen On 192/648
Screen Off 192/384
Governer OnDemand
Sometimes I up the frequency if I need to run something heavy, not all that often though.
agreed 192 minimum is much better. if you are having issues with the phone being slow then get rid of sense...
Just wanted to say thanks to the three users above this post as I tried 192mhz and it is in fact a lot better now (please realise I've only just turned 17 and play a lot of games hence 500mhz)
my phone is sensation XE and now with Ordroid 1.8.3 ROM.
I heard that setcpu can help extend battery power life, but when I tested the setCPU on my sensation XE, I did not see that the battery life was extended at all. If you set underclock for the CPU when screen off, it became a little laggy when you get the screen on...in a word, I don't think it is useful for our daily use of the phone...
What you think and could you let me know your experience of using the setCPU?
Yes you are right if we underclock unlocking the phone become laggy.its because the max clock cycle will reduce to very low..i am using CPU tuner in which i increase the max clock rate while screen off little more..do one thing..increase underclock Max clock frequency little bit more..so that it will not slow during unlocking.....try it ..
Xperian using xda app
shyamjptpm said:
Yes you are right if we underclock unlocking the phone become laggy.its because the max clock cycle will reduce to very low..i am using CPU tuner in which i increase the max clock rate while screen off little more..do one thing..increase underclock Max clock frequency little bit more..so that it will not slow during unlocking.....try it ..
Xperian using xda app
Click to expand...
Click to collapse
That's a good advice. Thanks, I will try it for sure...
BTW, is it really power saving to underclock the CPU when screen off?
yes it saves but when somebody calls then the alert will be late,probably vibrate first and after 3s backlight will be on and finally it rings!!!!
hit thanks if it helps!!
well this is my first thread here. i just want share something here and if my bad english can't express what I mean and make some guys not happy sorry about that....
ok let's back to the topic.i have met much more srceen upside down's problem in different rom with different kernel and want solve the problem but cannot becase of my limited skills. but today i find a the min cpu frequency will make the sreen different.
that is:
if i chose the min cpu frequency at 192 MHz and meet the screen upside down very frequently.
the default min cpu frequency is 268 MHz and meet the screen upside down often.
if i chose the min cpu frequency at 345 MHz and meet the screen upside down very few times.
if i chose the min cpu frequency at 1036 MHz and cant meet the screen upside down
test like this:
chose different min cpu frequency and close the screen then open the screen then close then open..
the roms i have tested have the same phenomenon
PACman_GLACIER v16.1
SyNthetic_aospX 1.0.0-MR1SG
well that's all
i know that may really not solve the problem just share it with you guys.
mybestway said:
well this is my first thread here. i just want share something here and if my bad english can't express what I mean and make some guys not happy sorry about that....
ok let's back to the topic.i have met much more srceen upside down's problem in different rom with different kernel and want solve the problem but cannot becase of my limited skills. but today i find a the min cpu frequency will make the sreen different.
that is:
if i chose the min cpu frequency at 192 MHz and meet the screen upside down very frequently.
the default min cpu frequency is 268 MHz and meet the screen upside down often.
if i chose the min cpu frequency at 345 MHz and meet the screen upside down very few times.
if i chose the min cpu frequency at 1036 MHz and cant meet the screen upside down
test like this:
chose different min cpu frequency and close the screen then open the screen then close then open..
the roms i have tested have the same phenomenon
PACman_GLACIER v16.1
SyNthetic_aospX 1.0.0-MR1SG
well that's all
i know that may really not solve the problem just share it with you guys.
Click to expand...
Click to collapse
I think it also has something to do with the governors too. I could use the same frequency on smartass v2 and performance but it happens less often on performance.
thx for reply. feel better at 345mhz with v2
Sent from my MyTouch 4G using Tapatalk 2
I can get the screen to flip regardless of frequency unless I switch to the performance governor. Then a max frequency of 384 still flips easily, but 784 and above is better.
Sent from my myTouch 4G using XDA
I2IEAILiiTY said:
I think it also has something to do with the governors too. I could use the same frequency on smartass v2 and performance but it happens less often on performance.
Click to expand...
Click to collapse
Performance maxes out the cpu at all times, which helps the OP's point.
Sent from my HTC Glacier using xda app-developers app
darjama said:
I can get the screen to flip regardless of frequency unless I switch to the performance governor. Then a max frequency of 384 still flips easily, but 784 and above is better.
Sent from my myTouch 4G using XDA
Click to expand...
Click to collapse
i feel min frequency of 384 may help not max frequency
Sent from my MyTouch 4G using Tapatalk 2