I have at max: 1200 MHz ,at min 83 and in typeerformance, are these values corecct or wrong for a custom rom?
-Greeting-
PD:Andro's Rom (3 days for release)
Yes, or no, because you need a screen off profile or your battery life will be damn short.
I think this should be in the general section and i recommend using the conservative governor over the performance since conservative goes to the minimum frequency when phone is not being used i.e. when screen is off. This is best for performance since it automatically goes to the maximum frequency when screen is on and when screen is off it goes to the minimum which is good for battery.
1200 is too high....
It will damage your battery....
I use 100 MHz to 800 MHz....
Its average and most of the users use the same....
[email protected] said:
1200 is too high....
It will damage your battery....
I use 100 MHz to 800 MHz....
Its average and most of the users use the same....
Click to expand...
Click to collapse
I think that is a very wise thing to do. I shall see how my phone runs at that speed.
Oks.thx.
Now:
MAX:800
MIN:83
Type: Conservative.
Are these values correctly now?
-Greettings-
AndroKite said:
Oks.thx.
Now:
MAX:800
MIN:83
Type: Conservative.
Are these values correctly now?
-Greettings-
Click to expand...
Click to collapse
Yeah its good.... ^_^
Happy to help..... ^_^
My batery temp is 27º - 28º celcius,is a good temp or maybe it can be danger for my battery?
-Grettings-
AndroKite said:
My batery temp is 27º - 28º celcius,is a good temp or maybe it can be danger for my battery?
-Grettings-
Click to expand...
Click to collapse
Aslong as its not 35+ degrees you are ok
Sent from my GT-I5800 using XDA App
Lol! Did you make a mistake by posting this question in the development section? Suppose to put at general section.
Accidentally sent from my ultra speedy SG3 phone using tapatalk.
P.S If my post have helped you, don't feel shy to click the thanks button
That frecuency will eat your battery.
I use my SetCPU at frecuencies 400-800Mhz, and use profiles for screen off (83-400Mhz), battery <20% (200-600Mhz), time (2am-6am) (83-83Mhz powersave)
always on demand (except time profile)
Greetings
My config is
Main 400-800 Mhz Ondemand Set on boot
Profiles
Temp >45°C 200-500 Mhz priority 100 Ondemand
time 2am-6am 83-83 Mhz priority 95 powesave
screen off 83-500 Mhz priority 90 Ondemand
Battery <20% 200-600 Mhz priority 80 Ondemand
I have g3mod 2.0 OC kernel
Greetings
I just use basic settings, no profiles or anything. Look in my signature.
I may add a few profiles after my lil bro is finished playing games on my phone.
My battery temp is 39 degrees Celsius is it that a good tempeture?
anything between 83 and 800 would work like charm and enough for day to day tasks..use conservative governor..set profile for screen off and on call..
Related
Hey so I was wondering what an appropriate level for min and max were on setcpu and I was looking for pretty decent battery life. Enough to get me through the day.
Sent from my HTC Glacier using XDA Premium App
To be honest, I have mine set to 806 max, 245 min ondemand. The 806 provides plenty for everyday tasks, and I can oc up to 1.7ghz on the rare occasion I play a 3D game.
Sent from my HTC Glacier using XDA App
Saad1115 said:
Hey so I was wondering what an appropriate level for min and max were on setcpu and I was looking for pretty decent battery life. Enough to get me through the day.
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
i run 1209max 368min...i get decent life as well...for example i just charged my phone lastnight after getting 1 day 16 hours on a single charge and that was with moderate use
plus everyones phone is going to be different....what works for me isnt always going to work for you and vice versa
Mine is more directed toward battery life, but there is alittle OC in there and it lasts me almost 2 days. (with gps on)
screen off priority 100: 368 max, 245 min
charging priority 90: 1516 max, 245 min
battery < 27% priority 70: 368 max,245 min
battery < 60% priority 60: 768 max, 245 min
battery < 70% priority 50: 1113 max, 245 min
default is 1209 max, 245 min
hope this helps!
Saad1115 said:
Hey so I was wondering what an appropriate level for min and max were on setcpu and I was looking for pretty decent battery life. Enough to get me through the day.
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Unless you are trying to impress your friends with crazy high quadrant scores, the STOCK or lower frequency will give you better battery life as well as easier on the CPU.
personally i keep mine @ 1018/238 via the native governor in the Cyanogen settings.
Unless i am playing some kind of heavy 3d game I keep mine on the interactive gov clocked @ 768/245
I keep mine at 1209 max 245 min with moderate use I can get up to a day & a half without charging.....
Iced glacier mytouch 4g white
Recovery-clockwork mod
There is no such thing as the best settings for OCd phones. Every chipset is different and will react differently to the load you place on it. The only thing that is certain is that on ondemand and interactive governors, having too big of a spread between max and min, will freeze your phone. Find what works for you and stick to it
It's time to Overclock our Phone...
DISCLAIMER: OVERCLOCK IS DANGEROUS FOR OUR PHONES
How to:
1. Now download r151 from Here
2. Put the files of r151 in the root of SD, run HARET.
3. Download SetCPU from Here and install It.
4. Now open SetCPU, And choice "Autodetect Speeds Reccomanded".
5. Allow Root.
6. Press Windows button and choice "Perflock Disabler" and "Attemp to Disable Perflock" and Check "Set on Boot".
7. Now, close the windows and OC our Phone.
My phone under USB and AC run at 825 MHz without Crash, i had tryed to run it at 864 MHz but System Crash everytime. Without USB and AC my phone run at 787 MHz. I Post 2 Images 1. = Normal Clock 2. = 825 MHz Clock.
To Made Benchmark i Use BenchmarkPi.
1. Screen Normal Clock
2. Screen 825MHz
For Other Question:
1. SetCPU
2. -r0bin-'s Post
I did it, it works perferctly !
Upscaled to 825 and min 128
Downscaled to 245 while charging and screen off
Thanks !
doublej4473 said:
I did it, it works perferctly !
Upscaled to 825 and min 128
Downscaled to 245 while charging and screen off
Thanks !
Click to expand...
Click to collapse
My Profiles:
1. Screen Off Min: 19 MHz Max: 245 MHz
2. In Call: Min: 128 MHz Max: 600 MHz
3. Charging AC: Min: 19 MHz Max: 825 MHz
4. Charging USb: Min: 19 MHz Max: 825 MHz
5. Main Profile: Min: 19 MHz Max: 787 MHz
...
Tell me please, does it helps to save the battery in last releace (r163)? I`m asking becouse i try to use Master CPU, and it seems to me that it don`t helps to save energy... But I don`t use profiles, only ondemand settings from 120-600 mHz.
Thanks!
@HTCxxxx
what is the percentage priority by profile?
puxus said:
Tell me please, does it helps to save the battery in last releace (r163)? I`m asking becouse i try to use Master CPU, and it seems to me that it don`t helps to save energy... But I don`t use profiles, only ondemand settings from 120-600 mHz.
Thanks!
Click to expand...
Click to collapse
To PowerSave try 19-480 MHz if Don't need Performance or 19-600 MHz Im Sorry But i Don't Know Master Cpu
doublej4473 said:
@HTCxxxx
what is the percentage priority by profile?
Click to expand...
Click to collapse
In Call is 100
And Screen Off 100 too.
19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.
codiak said:
19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.
Click to expand...
Click to collapse
Why Unusable??? Yhea, Undervolting can be an Interesting Thing, but i Think if the Volting is too low phone Freeze, and if is too high cpu can have an High temperature if you're stressing cpu and phone can freeze too. But i've noted, when i use a low "screen off" profile battery consumaption is high? why? is a problem of kernel? or is nomal?
codiak said:
19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.
Click to expand...
Click to collapse
you are right,i also experienced that 19 Mhz makes phone lazy
i'm also agree about 2nd part..i read the same
HTCxxxx said:
Why Unusable??? Yhea, Undervolting can be an Interesting Thing, but i Think if the Volting is too low phone Freeze, and if is too high cpu can have an High temperature if you're stressing cpu and phone can freeze too. But i've noted, when i use a low "screen off" profile battery consumaption is high? why? is a problem of kernel? or is nomal?
Click to expand...
Click to collapse
you don't need to undervolt it too low,you just need to find the right voltage
try last kernel from r0bin and you will not have high battery consumption anymore
Low Mhz does not lead automaticly to low consumtion.
If you phone has something todo (update something for example) it will get the job done faster with high Mhz and is going fastert to sleep after that.
With low Mhz it takes longer and so can have higher consumtion.
On my HD2 I dont use profiles (like screen off) and it has a very low consumtion on standby/sleep.
If you set a minimum speed when screen is off a11 is not able to go to suspend, maybe
just a quick feedback on power consumption:
it never been so good with r167+drain fix without SetCPU
when I set profiles with low frequency (19 or 128Mhz) it keeps on consuming battery up to 100mA. when i switch SetCPU profiles off, i go to 9mA in suspend mode.
true story
there must be a way to setup SetCPU in a way it doesnt affect too much battery drain in suspend mode, but for the time being i just deactivated it.
tzacapaca said:
you are right,i also experienced that 19 Mhz makes phone lazy
i'm also agree about 2nd part..i read the same
you don't need to undervolt it too low,you just need to find the right voltage
try last kernel from r0bin and you will not have high battery consumption anymore
Click to expand...
Click to collapse
yes i see some improvement, and im happy for it...
(I THINK)
Hi All,
I've understood why CPU doesn't run @ 19MHz or @ 128 MHz...
Go to /sys/acpucloclock and look acpuclk_tbl...In It there are write all frequencies CPU can Run:
245760,400000,480000,600000,768000,787200,806400,825600,844800,864000....
but no Under 245 MHz so if You use a Profile for Screen off From 19MHz to 254MHz, cpu Run everytime @ 245MHz...so there is an high consummation of energy
bye
HTCxxxx said:
(I THINK)
Hi All,
I've understood why CPU doesn't run @ 19MHz or @ 128 MHz...
Go to /sys/acpucloclock and look acpuclk_tbl...In It there are write all frequencies CPU can Run:
245760,400000,480000,600000,768000,787200,806400,825600,844800,864000....
but no Under 245 MHz so if You use a Profile for Screen off From 19MHz to 254MHz, cpu Run everytime @ 245MHz...so there is an high consummation of energy
bye
Click to expand...
Click to collapse
hi
as codiak said earlier lowering CPU(underclocking) doesn't have so much impact on battery life..he also explained you why..if you want i will explain you too
explanation:run CPU at low voltage,open an app or downloading an email,etc= CPU will take time to get to the level app needs,display will stay longer while it CPU will get done the job= worse battery life
Undervolting will have impact on battery life
explanation:run same CPU clock at lower Voltage= CPU will use less power=better battery life
hope it's clear enough for you now,and if anyone else thinks i'm wrong feel free to prove me i'm wrong
P.S. Anyway i asked devs and they will lower CPU to run @ less than 245 Mhz.
Enjoy
tzacapaca said:
hi
as codiak said earlier lowering CPU(underclocking) doesn't have so much impact on battery life..he also explained you why..if you want i will explain you too
explanation:run CPU at low voltage,open an app or downloading an email,etc= CPU will take time to get to the level app needs,display will stay longer while it CPU will get done the job= worse battery life
Undervolting will have impact on battery life
explanation:run same CPU clock at lower Voltage= CPU will use less power=better battery life
hope it's clear enough for you now,and if anyone else thinks i'm wrong feel free to prove me i'm wrong
Click to expand...
Click to collapse
Ok thank you very much!!!
I am using:
Rom: Insertcoin
Kernel: Bricked 1.5
Could you give me some tips to setup the best way setcpu.
I've seen some guys mentioning setting lowest frequency to around 400 and etc. and I don't know why. Could you give me some advice on setting up the program correctly.
Hi, I personally set the lowest frequency to somewhere around the 500mhz and smaller and set the govenor to ondemand as this will only use the the speed of your kernel when its needed thus, will use less battery.
Why around 500mhz and not 194. And will 5 sec refresh on the widget drain much battery? It's now on passive because I don't want to loose battery on bull****.
SsBloodY said:
Why around 500mhz and not 194. And will 5 sec refresh on the widget drain much battery? It's now on passive because I don't want to loose battery on bull****.
Click to expand...
Click to collapse
I put at 500mhz because sometimes the phone may slow down on its own and I don't think that setting the refresh rate to 5sec will steal much battery because its only a small widget
Any more opinions? Would be nice
Don't set it to 500 minimum. This will lock the phone to at least 500 mhz at all times and will cause substantial battery drain.
Go with 192 minimum or the next step up.
Sdobron said:
Don't set it to 500 minimum. This will lock the phone to at least 500 mhz at all times and will cause substantial battery drain.
Go with 192 minimum or the next step up.
Click to expand...
Click to collapse
+1 on that.
My personal settings (most of the time) are:
Screen On 192/648
Screen Off 192/384
Governer OnDemand
Sometimes I up the frequency if I need to run something heavy, not all that often though.
agreed 192 minimum is much better. if you are having issues with the phone being slow then get rid of sense...
Just wanted to say thanks to the three users above this post as I tried 192mhz and it is in fact a lot better now (please realise I've only just turned 17 and play a lot of games hence 500mhz)
i want to know just one thing
is overclock danger or not ?? safe or not ??
some of my friends said that they do this and it still for sometime and then the cpu burn what this mean ?? i'm afraid to use caynogen mod with oc karanel to up to 801 mghz some one tell me it is danger and so risky
can you help me found the best rom yet for galaxy fit ??
jack1990sparrow said:
i want to know just one thing
is overclock danger or not ?? safe or not ??
some of my friends said that they do this and it still for sometime and then the cpu burn what this mean ?? i'm afraid to use caynogen mod with oc karanel to up to 801 mghz some one tell me it is danger and so risky
can you help me found the best rom yet for galaxy fit ??
Click to expand...
Click to collapse
Okay look....
Overclocking is both safe and dangerous....
If you keep your phone overclocked at a high frequency all the time then it will cause damage to the CPU and the battery life....
But 800 MHz if fairly enough and should not cause any damage.
Even I keep my phone at 800 MHz all the time....
Regarding the best ROM, just check out the development section and find the ROM that matches your needs....
thanks you i think it is good enough to overclock but it must be for your daily work if you want read book than make the cpu speed in 500 if want to play games make it in 800 but i think the battery life will be very bad what you think i must do to keep my life battery up every time ?
i just want rom for gaming and so fast i will check the development section thanks you
jack1990sparrow said:
thanks you i think it is good enough to overclock but it must be for your daily work if you want read book than make the cpu speed in 500 if want to play games make it in 800 but i think the battery life will be very bad what you think i must do to keep my life battery up every time ?
i just want rom for gaming and so fast i will check the development section thanks you
Click to expand...
Click to collapse
You can set up profiles using the SetCPU app to get a better battery life....
Here's my SetCPU profile settings :
Normal Usage - 83 to 800 MHz
Screen off - 83 to 300 MHz
Time based (4:00 AM to 7:00 AM) - 83 MHz
Governer - Ondemand
My battery lasts about 30 hours with moderate usage....
[email protected] said:
You can set up profiles using the SetCPU app to get a better battery life....
Here's my SetCPU profile settings :
Normal Usage - 83 to 800 MHz
Screen off - 83 to 300 MHz
Time based (4:00 AM to 7:00 AM) - 83 MHz
Governer - Ondemand
My battery lasts about 30 hours with moderate usage....
Click to expand...
Click to collapse
OMG How is that possible 30 hours
i aleary set cpu to max 1.8ghz and min 1.6ghz how to st it?? i did try to set it too 1.8mina nd max but my phone hangs and powerd-off!!! how to set it?!
Hey. I wouldnt recommend your current srtup at all unless you want horrible battery life and massive amounts of heat however i sont have an answer for your predicament, try using another app with the same function?
Sent from my GT-I9100 using XDA
listen to me. set it like I say:
max frequency 1512
min frequency 384
governor interactive
go to profiles and create a new profile. set:
screen off
max 432
min 192
governor conservative
priority 100
this way you have a good performing phone and with screen off a power saving profile. with this configuration I have 15 hours battery (enough for a day) of mid use...with data activated and live wallpaper
Nice stats ! I'm going to try that!
Sent from my Sensation 4G using xda premium
Some phones can handle higher frequency then others if your phone can't go over 1.8 well there is nothing you can do..
Swyped From My Sensation.
I SET IT TO this But anyway i don't care battery life
Dont OC much
dude that's friggin gih frequency's. Dont push it too hard, it'll do no good to the processor. Besides, what do you need that kind of power for ? Runing Crysis ?