Database Info

Unbrick your NEXTBOOK 7 PREMIUM

Ok, just bricked my Nextbook 7
Here is how I flashed a firmware without access to recovery:
If you are in a bootloop, Connect USB and Power.
Press and hold pin on back until you hear windows try to detect a device but the screen is off.
Download this: http://arctablet.com/assets/tools/Firmware/Rockchip_CPU_based/Rockchip_Batch_Tool_v1.4.zip
Install the driver from the drivers folder.
3. Installing the drivers on the computer
Following the tablet entering in recovery mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package.
It will then install the driver for RK29 Device
4. Sending the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file from here:
http://www.multiupload.com/NQHSNZJSO2
Then push the Upgrade button to transfer the selected firmware to the tablet.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
This procedure has been successfully tested on Windows XP 32 bits for flashing a bricked NextBook 7 Premium YF1011 (but should work on others)

Hi, the multiupload link seems down, would it be possible to re-up? thanks!

And how exactly are you supposed to install the drivers from the driver folder? Because those are not Runable files, theyre drivers, with no install command. So, my daughters nextbook is bricked, wont install drivers(says not successfully installed after i plug it in) and there is no way to install the drivers from the batch file. Anything you left out??? Id like to unbrick this thing. Thanks..

SOLVED
I found out how to install the drivers on windows 7!
Follow this:
click the start button > type in the search box right above the start button "device manager"
(make sure the tablet is plugged in and in USB MODE)
right click the tablet or unknown device
select install/update driver manually
browse for the driver in the download folder then it should be updated
worked for me.

Nextbook 8 stuck in bootloop
I am a noob. My Nextbook 8 is stuck in bootloop, the last app i downloaded was firefox. Ive read that this can be fixed by starting safe mode and doing a factory reset, how do i do this?!? Im desperate, and would greatly appreciate any help that works, thanks.

A quick tutorial to ROOT Micromax A50 Ninja

Please charge your phone atleast 50% or above before you follow the guide.
I am not providing any screenshots.
Steps:
1. Download all the attached files to this post.
2. Unzip mt65x3 usb vcom drivers.7z and install the drivers.
3. Create a folder in C drive or anywhere you like and unzip SP Flash Tool v2.1134.00.7z.
4. Copy the files MT6573_Android_scatter.txt and boot.img to the folder you created and unzipped the SP Flash Tool v2.1134.00.7z.
5. Open the folder where you extracted SP Flash Tool v2.1134.00.7z and right click on the Flash_tool.exe and run as Administrator.
6. In the Flash tool window, click on File and Open Scatter-loading File and on the pop-up window, select the file MT6573_Android_scatter.txt and click Open
7. A pop-up might appear, click OK and if you see any kind of error, ignore it.
8. A list on the bottom pane should appear of the flash tool window. Uncheck all excet BOOTIMG and click or double click on the BOOTIMG. On the pop-up window, select the boot.img file that you copied earlier and Open.
9. Click on Options of the Flash tool and click USB Mode if not selected.
10. Now you are ready to flash your phone.
11. Switch off your phone and take out the battery. Put your battery back on the phone. Do not switch on. Connect it to your PC with the USB cable without pressing any button on the phone. Now windows should find the drivers and install it. After drivers are installed, unplug the cable from your phone. Take out the battery from the phone and put it back again. Do not switch on.
12. Now on the Flash Tool window click on the Download button. A message will appear on the bottom right of the window 'Please insert USB cable in 14 seconds', with the counter running. While its running, connect your phone to the PC. If you fail to do it, repeat Step 12.
13. When connected properly, you will see a yellow progress bar, after finishing 100% a pop up window will appear saying BOOTIMG downloaded. You are done.
14. Now unplug your phone, take the battery out, put it back and start the phone normally as you do. Let it fully boot. (Nothing should be wrong, cuz nothing happened to mine. I tested it first. Ashik Anwar second.)
15. Enable USB Debugging on your phone and and connect it to the PC.
16. Installing USB ADB Drivers or USB Debugging Drivers:
Unzip usb_driver.zip.
Open 'Device Manager'.
Right click on 'Micromax A50' and click 'Update Driver Software'.
On the new window, click 'Browse my computer for driver software', then click 'Let me pick from a list of device drivers on my computer'.
Click 'Have Disk'.
On the new Pop-up window, click 'Browse' and go to the folder where you previously unzipped the drivers and open the folder usb_driver.
Now select from the list of files 'android_winusb.inf' and click 'Open', then click 'OK'.
Now from the list of 3 options, select 'Android ADB Interface' and click 'Next'.
An 'Update Driver Warning' will appear, click 'Yes'.
Another Warning will appear asking 'Would you like to install this device software.
Click Install.
Now the drivers should be installed.
17. Now unzip unlockroot23.zip and install the unlockroot23.exe and run the program.
18. Now time to root. On the UnlockRoot window, click ROOT and the program will root it. When finished, it will ask you to restart your phone. So switch it off and switch it on again.
19. Now after you have switched on your phone, browse through the Apps Drawer. You should find an application called Superuser.
You are ROOTED!!!
Still check it by installing an app that needs root permissions, like Root Explorer.
Install BusyBox from PlayStore cuz some programs need it for root access.
Thanx to Varun for providing the modified boot.img and thanx to all the developers for their hard work in cracking and hacking Android for the benefit of the people.
To overclock, Install MTK CPU-Control test from PlayStore. Doesnt need root.
You can overclock upto 806MHz. Enable Set on boot.
Overclock To 754MHz for stability issues.
Enjoy folks!!!
EDIT:
If you are getting error while flashing, repeat the steps.
If you are unable to boot, please flash the original_boot.img
Remember to run the Flash Tool as Administrator
Also the UnlockRoot program as Administrator
I am not responsible for the death of your phone

Rooting the micromax a52 aisha
i have read your post, can you post a tutorial to root micromax a52 aisha, and increase internal memory

can you help us to root micromax a56
http://forum.xda-developers.com/showthread.php?t=1791748
We also got boot.img and other files
http://forum.xda-developers.com/attachment.php?attachmentid=1235489&d=1343837004

Pls can this procedure work with all mt6573 chipset phone. Cause I've tried all the major rooting process like superone and it likes.
The phone is TECNO T1.
Thanks in advance
Sent from my TECNO T1 using xda premium

saheb11123 said:
i have read your post, can you post a tutorial to root micromax a52 aisha, and increase internal memory
Click to expand...
Click to collapse
So sorry
Been busy
Read this whole website for anything related to Mediatek processors for flashing.
http://bm-smartphone-reviews.blogspot.in/2011/10/mt65x3-flashing-tutorial.html
You need to have a linux machine, Ubuntu, to unpack the boot.img, making unsecure to 1 and the repack it. Flash it back.
I dont have a linux machine anymore.
Searh the net for tutorials.
Bootloader unsecure.
I dont have the time and also aint using the A50 anymore.
Dont mind
Goodluck.

aydot360 said:
Pls can this procedure work with all mt6573 chipset phone. Cause I've tried all the major rooting process like superone and it likes.
The phone is TECNO T1.
Thanks in advance
Sent from my TECNO T1 using xda premium
Click to expand...
Click to collapse
Procedure is same, but bootloaders are/must be different.
Read http://bm-smartphone-reviews.blogspot.in/2011/10/mt65x3-flashing-tutorial.html
First dump the boot.img
unsecure it.
Flash it back.
for unsecuring, google
busy
no time
cant help more than this
goodluck

Thanks a lot for a wonderful guide

Can this be done from a linux machine? (Ubuntu for e.g.)

Rooting the rko3066/rockchip 3066 device

I'm a newbie to Android, but I fumbled around with a rooting tool and found a method that works to root two flavours of rko3066, rockchip 3066 devices. As it only roots the device, I see no reason why it should not root any android device, as long as the correct device drivers are used.
USE AT YOUR OWN RISK.
As always with any routine that flashes the eprom of any
cpu, no responsibility is assumed or implied by the author
for any damage that following these instructions may cause
to your phone, tablet, pc or device.
USE AT YOUR OWN RISK.
Rooting u30gt-h
On tablet
1.In U30gt-h Settings->Display open sleep setting.
2.Set sleep to at least ten minutes.
3.In U30gt-h Settings->storage->click on Three dots in upper
right of Settings window title field
4 Select USB computer connection Dropdown menu .
5. Select "Mass Storage" check box
6. <-- backout of storage settings
7. Browse down in Settings and select Security
8.In Security Settings, Select Unknown sources, to give the
Android device permission to install software from sources
not specifically sanctioned by Google and the Android
Consortium. This ensures that the Root utility,
Tp-Sparky-Root.bat will have the necessary access rights to
root the u30gt. If you have any qualms about unsanctioned
files on your tablet or device, you will want to uncheck
this selection after the rooting process is complete.
Whether any of the rooted utilities and programs you will
want to use are sanctioned, is anybody's guess. As always,
be careful when Dling or intalling Any software. I trust
everyone has and uses anti-virus software on all your
devices.
8.scroll down in settings and select {} Developer
Options, if not there, go to (i)about tablet and touch and
hold the Build field and it will bring up developer Options
in the left hand main menu.
9. In Developer Options, select USB debugging.
10. Close settings, and any other open apps.
11. Goto U30gt main android desktop, to ensure good clean
reboots.
12. Using a Known good micro USB to std USB cable,
connect U30gt tablet to PC, you'll get a "connecting to usb"
in notifications area in Android, and a usb icon in the
notification area. You Do Not want to select "Connect to Pc
to Transfer Files", in the notification menu, just plug in the
cable and let it be.
USE AT YOUR OWN RISK.
On PC
1. Search in a web browser for RKBatchTool_u30.zip, the 1.5
version, DL and unzip in the default zip file subdirs.
Rk-batch-tool 1.5 has u30gt drivers, browse the Rk-batch
tool's dir for the u30 drivers for your PC OS. Right click
on the rockusb.inf and chose Install, to install the driver.
2. Verify that you have a rockchip_usb USB Device under disk
drives in Device Manager. Control Panel->System->Hardware->
Device Manager->Disk Drives->rockchip_usb USB Device.
3. Dl TPSarky-VonDroid-Root.rar from
*"mediafire.com/?vd3y1rld2amdxq5"*
as a newbie I cannot post links, so search mediafire.com for TPSarky-VonDroid-Root.rar
4. Unarchive TPSarky-VonDroid-Root.rar, using an archive, or
zip utility: Winzip, alzip, etc. It may require the password
"geekbuying.com" to unrar the archive.
5. Mouse into TPSarky-VonDroid-Root directory created by the
rar file, until you get to TPsparkyRoot.bat and adb.exe
files, a couple of sudirs inside TpSarky unzipped file
directories.
6. Run, double click on, adb.exe first. It opens up a dos
command window, runs a dos executable that launches adb
server and connects to the U30gt. It opens and closes so
fast you won't hardly see it. If you Do Not run adb.exe.
first, Tp-Sparky-Root.bat will not communicate with the
U30gt, and your root will fail.
7. Now run, double click on, Tp-Sparky-Root.bat
Tp-Sparky-Root.bat will Immediately reboot the u30gt.
8. When the u30gt reboots, hit space key as instructed.
Tp-Sparky-Root.bat will reboot the u30gt, again.
9. Press the space key as instructed, again. The command line
will show
uid=0<root> gid=0<root>
if you have a successful root.
10. Press the space key as instructed, again.
The command informs you the U30gt root has been remounted,
there are a couple of errors relating to SuperSU, I presume
SuperSu was Not included in the tpsarky zip file, or is in
the wrong place for the batch file to find it, but you can
DL SuperSU from GooglePlayStore, nhnf. The Utility notifies
you that Tp-Sparky-Root.bat is completing the root.
11. The u30gt will reboot one last time.
12. DL Titanium Backup Root, Rootchecker, or Avast Android to the tablet,
and they will confirm a rooted tablet.
**As this method only Roots the device, and since it worked
on both my u30gt and an Imito-Mx1 mini android, I think it
should work on nearly any RKO3066 droid device.
As always with any routine that flashes the eprom of any
cpu,
USE AT YOUR OWN RISK.
Thanks to the people who initially posted the original root
routine for the IMITO-MX1 on Youtube, and to geekbuying for
this procedure, as well as the files for rooting the IMITO-
MX1 and ultimately the u30gt. A big thanks to Tp-Sarky or
Tp-Sparky, whoever they may be, for writing the batch file
that does all the work. I also want to thank 900Supersport,
kastycube and the good folks at alldocube for their various
flavours of the u30gt firmware and utilities, as well as
flashmyandroid.com
I have tried all flavours of android 4.1 firmware, 900
supersport, kastycube, to the generic cube-tablet.com
versions from 1.07 to the latest greatest build 1.11, and
None of them gives me access to the microsd card. I bought
two of these puppies for Christmas, IPS version, and neither
the original out of the box or my reconfigured one reads
microsd. It is possible that both got bad sd card readers,
but unlikely. As my imito-mx1 miniandroid reads the microsd
cards, as does the adapter in my pc, it is most probably an
U30gt flavour android system software issue. Anybody got any
clues how to resolve microsd issues in android?

works great
533online said:
I'm a newbie to Android, but I fumbled around with a rooting tool and found a method that works to root two flavours of rko3066, rockchip 3066 devices. As it only roots the device, I see no reason why it should not root any android device, as long as the correct device drivers are used.
USE AT YOUR OWN RISK.
As always with any routine that flashes the eprom of any
cpu, no responsibility is assumed or implied by the author
for any damage that following these instructions may cause
to your phone, tablet, pc or device.
USE AT YOUR OWN RISK.
Rooting u30gt-h
On tablet
1.In U30gt-h Settings->Display open sleep setting.
2.Set sleep to at least ten minutes.
3.In U30gt-h Settings->storage->click on Three dots in upper
right of Settings window title field
4 Select USB computer connection Dropdown menu .
5. Select "Mass Storage" check box
6. <-- backout of storage settings
7. Browse down in Settings and select Security
8.In Security Settings, Select Unknown sources, to give the
Android device permission to install software from sources
not specifically sanctioned by Google and the Android
Consortium. This ensures that the Root utility,
Tp-Sparky-Root.bat will have the necessary access rights to
root the u30gt. If you have any qualms about unsanctioned
files on your tablet or device, you will want to uncheck
this selection after the rooting process is complete.
Whether any of the rooted utilities and programs you will
want to use are sanctioned, is anybody's guess. As always,
be careful when Dling or intalling Any software. I trust
everyone has and uses anti-virus software on all your
devices.
8.scroll down in settings and select {} Developer
Options, if not there, go to (i)about tablet and touch and
hold the Build field and it will bring up developer Options
in the left hand main menu.
9. In Developer Options, select USB debugging.
10. Close settings, and any other open apps.
11. Goto U30gt main android desktop, to ensure good clean
reboots.
12. Using a Known good micro USB to std USB cable,
connect U30gt tablet to PC, you'll get a "connecting to usb"
in notifications area in Android, and a usb icon in the
notification area. You Do Not want to select "Connect to Pc
to Transfer Files", in the notification menu, just plug in the
cable and let it be.
USE AT YOUR OWN RISK.
On PC
1. Search in a web browser for RKBatchTool_u30.zip, the 1.5
version, DL and unzip in the default zip file subdirs.
Rk-batch-tool 1.5 has u30gt drivers, browse the Rk-batch
tool's dir for the u30 drivers for your PC OS. Right click
on the rockusb.inf and chose Install, to install the driver.
2. Verify that you have a rockchip_usb USB Device under disk
drives in Device Manager. Control Panel->System->Hardware->
Device Manager->Disk Drives->rockchip_usb USB Device.
3. Dl TPSarky-VonDroid-Root.rar from
*"mediafire.com/?vd3y1rld2amdxq5"*
as a newbie I cannot post links, so search mediafire.com for TPSarky-VonDroid-Root.rar
4. Unarchive TPSarky-VonDroid-Root.rar, using an archive, or
zip utility: Winzip, alzip, etc. It may require the password
"geekbuying.com" to unrar the archive.
5. Mouse into TPSarky-VonDroid-Root directory created by the
rar file, until you get to TPsparkyRoot.bat and adb.exe
files, a couple of sudirs inside TpSarky unzipped file
directories.
6. Run, double click on, adb.exe first. It opens up a dos
command window, runs a dos executable that launches adb
server and connects to the U30gt. It opens and closes so
fast you won't hardly see it. If you Do Not run adb.exe.
first, Tp-Sparky-Root.bat will not communicate with the
U30gt, and your root will fail.
7. Now run, double click on, Tp-Sparky-Root.bat
Tp-Sparky-Root.bat will Immediately reboot the u30gt.
8. When the u30gt reboots, hit space key as instructed.
Tp-Sparky-Root.bat will reboot the u30gt, again.
9. Press the space key as instructed, again. The command line
will show
uid=0<root> gid=0<root>
if you have a successful root.
10. Press the space key as instructed, again.
The command informs you the U30gt root has been remounted,
there are a couple of errors relating to SuperSU, I presume
SuperSu was Not included in the tpsarky zip file, or is in
the wrong place for the batch file to find it, but you can
DL SuperSU from GooglePlayStore, nhnf. The Utility notifies
you that Tp-Sparky-Root.bat is completing the root.
11. The u30gt will reboot one last time.
12. DL Titanium Backup Root, Rootchecker, or Avast Android to the tablet,
and they will confirm a rooted tablet.
**As this method only Roots the device, and since it worked
on both my u30gt and an Imito-Mx1 mini android, I think it
should work on nearly any RKO3066 droid device.
As always with any routine that flashes the eprom of any
cpu,
USE AT YOUR OWN RISK.
Thanks to the people who initially posted the original root
routine for the IMITO-MX1 on Youtube, and to geekbuying for
this procedure, as well as the files for rooting the IMITO-
MX1 and ultimately the u30gt. A big thanks to Tp-Sarky or
Tp-Sparky, whoever they may be, for writing the batch file
that does all the work. I also want to thank 900Supersport,
kastycube and the good folks at alldocube for their various
flavours of the u30gt firmware and utilities, as well as
flashmyandroid.com
I have tried all flavours of android 4.1 firmware, 900
supersport, kastycube, to the generic cube-tablet.com
versions from 1.07 to the latest greatest build 1.11, and
None of them gives me access to the microsd card. I bought
two of these puppies for Christmas, IPS version, and neither
the original out of the box or my reconfigured one reads
microsd. It is possible that both got bad sd card readers,
but unlikely. As my imito-mx1 miniandroid reads the microsd
cards, as does the adapter in my pc, it is most probably an
U30gt flavour android system software issue. Anybody got any
clues how to resolve microsd issues in android?
Click to expand...
Click to collapse
works great full root on sk30sdk android 4.1.1 2013 rockchip tablet follow instructions and all is well

do you have any idea; f this process works on
Next book 7 premium se
s/n: YFG121******* ?
Sent from my Next7P12 using Tapatalk 4 Beta

Just rooted PIPO M9 which is a RK3188 using this method.
Althought I can everything that a rooted device does, including executing the apps and changing syste files, I don't see SU app anywhere?
Is this normal?

cool, I think I'm gonna try this method tonight after work.
I'll let you know how it goes
Hacking my Own Next7P12-GP, PM me if you can help

Thanks .. it works for RK30_ICS :good::good:

Djuganight said:
Just rooted PIPO M9 which is a RK3188 using this method.
Althought I can everything that a rooted device does, including executing the apps and changing syste files, I don't see SU app anywhere?
Is this normal?
Click to expand...
Click to collapse
Yep, but for security reasons it's better to install some su governor, because now every app can have root access without your permission.

http://forum.xda-developers.com/showthread.php?p=43584766#post43584766
Check this for simple 4 steps root for this device. Easy and without any risks and even with an unroot tool.

Hi Guys, I Need Help to Root my Alcatel One Touch Tab 7HD with
Chipset: Rockchip RK3066
Android 4.1.1
Kernel Version: 3.0.8+
Build Number: 100_ASPPH_000
I cannot enter too Stock Android Recovery Mode ;(
I already Install the adb driver, usb driver of this device and Rockchip Driver ;(
I'll try many Rooting Procedures but Opportunetly it doesnt work ;(
The ff. the i will use to ROOT this Alcatel One Touch Tab 7 HD are
Application Status
1. UnlockRoot Failed
2. SuperOneClick v.1.9.1.0 Failed
3. Root_with_Restore_by_Bin4ry_v31 Failed
4. Srsroot Failed
5. Zuodashi Failed
i'll Try also this Method but its doesn't work too ;(
Rooting the rko3066/rockchip 3066 device
http://forum.xda-developers.com/show....php?t=2127573
[GUIDE] Fix ADB USB driver for Rockchip RK3066
http://forum.xda-developers.com/show....php?t=2061063
I hope any can Help me. ;(

Thank you very much, I have just rooted my Cube U18GT-S

Works also on Kiano Core 10.1 Dual 3G...
after installing Samsung Android ADB driver for Win 7. Thank you very much.....:fingers-crossed: :good:

Search in a web browser for RKBatchTool_u30.zip, the 1.5
version, DL and unzip in the default zip file subdirs.
Rk-batch-tool 1.5 has u30gt drivers, browse the Rk-batch
tool's dir for the u30 drivers for your PC OS. Right click
on the rockusb.inf and chose Install, to install the driver.
Click to expand...
Click to collapse
I'm trying to root my Andi-7 tablet with Android 4.1.1 and the RK30sdk.
I searched as instructed and found this zip file.
Extracted the file, found rockusb.inf and right clicked and chose install.
Every time, I get the error message.
Any help?

Thanks
Works on Xelio P717A

You can try this method found here http://forum.xda-developers.com/showthread.php?t=1987280&page=2. It's the method I used on my IdeaUSA CT705 it's just repetative having to keeping pushing the"enter" button as it also states in the thread.

Working on iRulu AX105
Thank you, working on iRulu AX105 Tablet, 10.1"

Permission denied
As ichiyamato said, this method not working for sk3066 device. Scrips are not working because there are no permission to copy necessary files into device.
All scripts gave,
Code:
*---* VonDroid.com N101 II Root Tool based on work by sunnydavid *---*
--- Plug in your device, make sure debugging is enabled in Developer Options
--- This script will now copy files over to your N101 II
failed on '/data/local/tmp' - Permission denied
link failed File exists
I think we should open write permission on device. But i dont know how.
Thanks.

Work on Touchmate TM-MID940
I have successfully root my Touchmate TM-MID940 with TPSarky Android rooting method
Thanks

Confirmed working on an Energy System i8 tablet.
The micro SD card on my device does not stay in properly, so this method was needed.
I had to manually fiddle with adb a little (I had been trying other methods to root), so personally I would change the instructions to explain how to open a command prompt and execute:
adb kill-server
adb start-server
(Check it says starting server)
adb get-state
(check it says device)
then run the batch file

Rooted Cube U30GT-H firmware original v1.11 Rockchip 3066 with Kingo Root. Easy, easy. :good:

rootmaster
ichiyamato said:
Hi Guys, I Need Help to Root my Alcatel One Touch Tab 7HD with
Chipset: Rockchip RK3066
Android 4.1.1
Kernel Version: 3.0.8+
Build Number: 100_ASPPH_000
I cannot enter too Stock Android Recovery Mode ;(
I already Install the adb driver, usb driver of this device and Rockchip Driver ;(
I'll try many Rooting Procedures but Opportunetly it doesnt work ;(
The ff. the i will use to ROOT this Alcatel One Touch Tab 7 HD are
Application Status
1. UnlockRoot Failed
2. SuperOneClick v.1.9.1.0 Failed
3. Root_with_Restore_by_Bin4ry_v31 Failed
4. Srsroot Failed
5. Zuodashi Failed
i'll Try also this Method but its doesn't work too ;(
Rooting the rko3066/rockchip 3066 device
http://forum.xda-developers.com/show....php?t=2127573
[GUIDE] Fix ADB USB driver for Rockchip RK3066
http://forum.xda-developers.com/show....php?t=2061063
I hope any can Help me. ;(
Click to expand...
Click to collapse
I think u should try rootmaster . Search it on google . Its an chieneese app but u shall understand how to use when u will install it . It can root many of the rk3066 devices

[Q] Bricked Asus Transformer TF 101 B60

Hi all first off I'm sorry if this has been posted before but I'm having a problem unbricking an Asus transformer tf101 B60, I'll start with what's going on or not for that matter. lol
1. Boot to recovery is CWM-Based Recovery v5.5.0.4 roach-tf101-r2
2. will not see sd card / backup-restore= -2014-04-05.02.52.56 / no files found
3. Choose a zip = e: can't open /sdcard/update.zip
4.PC windows 7 pro 64 bit will not see the tablet when plugged into usb getting unrecognized device,force driver still getting yellow ding=device cannot start
if I plug in the usb and turn on the tablet windows does not even see that and unit sits on logo screen. and other screen the cold lynx boot that hangs there.
So in short I'm hitting a brick wall, windows won't see it, it won't see the SD card in recovery mode.
I've read in these posts how to fix this problem and have all the software / firmware you name it, but they all say almost the same thing, windows needs to see the device in order for any of these fixes to work, and thus is my wall I'm hitting.
Any help to find a solution to this problem would be oh so thankful to you all and call you Tablet Gods, this was a tablet given to me as a paper weight and I thought if it boots it can be fixed?
Thanks for your time and God like tablet knowledge.
Cheers.

Install the APX drivers (Universal Naked Drivers) and use the tool "Easyflasher" to flash TWRP recovery (Forget CWM) both from this link
http://forum.xda-developers.com/showthread.php?t=1688012
You might need to install the APX drivers manually using Device Manager
If you find that the PC still does not see the TF101, you might need a new cable

Driver Not Working
*Detection* said:
Install the APX drivers (Universal Naked Drivers) and use the tool "Easyflasher" to flash TWRP recovery (Forget CWM) both from this link
http://forum.xda-developers.com/showthread.php?t=1688012
You might need to install the APX drivers manually using Device Manager
If you find that the PC still does not see the TF101, you might need a new cable
Click to expand...
Click to collapse
I booted the unit into recover mode and windows sees unknown device..Ok
Tried to install new naked driver and getting a splash saying not compatible with windows 64 bit, I tried this on a brand new windows 7 pro 32 bit laptop and got the same results. I do have a brand new usb cable for it thinking that the old one was faulty, tried adb again same thing no device found, are there any commands in terminal emulator that can force the driver on the usb port? I'm thinking that if windows sees an unknown device then at least it sees something there just not whats there? Am i wrong in that somehow it's lost the usb firmware connection? so the driver will not install and if forced does not make the connection to the device? So this is my results.
So I'm ready to put gun in mouth over this, my laptops going to divorce me over driver abuse and the tablet mocks me with the frozen Asus logo.
Again Thanks for all the advice and i'll keep slugging it out.As this unit is in perfect condition outside of the Bricked part

You don't need to boot it into recovery mode to start with, just install the drivers normally first with the TF101 connected and booted normally
It's always going to say it can't find the device if the driver isn't installed
Focus on getting that APX driver installed and working, once you have that installed, Im pretty sure it will see the device fine

Asus TF101 B60 Softbrick? What Now?
Hello all.
I've been searching in vain for an answer to my Bricked Asus tf101? I'm just going to get right to the problem.
I can't get the tablet to be seen by windows 7 pro 64bit, Unknown device and yes I've tried everything, except asking if there's a way to force connection through a terminal like I've seen done with a router and a network switch to force a flash file so as to get at least a response after a reboot instead of just the Asus splash screen, here's a summary.
The Good.
1. I can boot to recovery CWM-based recovery v5.5.0.4 roach-tf101-r2 with menu's
Bad: Does not see sd card only see's internal and there's no file or folder error for backup/restore
2.Boots to screen with 2 icons data wipe and linix cold boot and goes nowhere from there just hangs.
So I'm stuck here, I have all to tools to do the job only if windows would see it, Adb does not see device which means the same thing no driver no fix,
Everywhere I read it says do this and that and it will restore to factory, that would be great if windows saw the thing, so I'm looking for a way to get the tablet to boot to something other than a loop. also tried the put the E101_SDUPDATE.zip in the root of the SD card and restart, does not see the card or file or both so it's not loading the file?
1. windows 7 not seeing device, will not take force drivers, Universal-Nvidia-Asus- MTP
2. recovery does not see sd card, so can't flash new anything?
3. So no communication from SD/USB
4. Is there a terminal command I can use to force a Blob or flash a recovery to the tablet when drivers and USB don't respond?
And to top that off my laptop filed for divorce for driver abuse..lol I'm not giving up.
Thanks to you all,
I want to thank you all for your time and advice it is very much appreciated, and I'll keep slugging away because I know there's a fix out there.
Cheers.

Drivers need to be signed in 64bit windows, use 32bit Win 7 either on another machine or in VMWare or Virtualbox etc
Then the drivers should install

Thanks
*Detection* said:
Drivers need to be signed in 64bit windows, use 32bit Win 7 either on another machine or in VMWare or Virtualbox etc
Then the drivers should install
Click to expand...
Click to collapse
Thanks for the Advice, Is there a thread outlining this so I can give it a try? I do have a new laptop I'm building out with windows 7 Pro 32bit as I've had so much trouble with the 64bit version.

If you're building a 32bit Win 7 laptop, then no need for virtual machines, just use that laptop, this is the Easyflasher thread, you should only need to follow the couple of simple instructions once you have 32bit Win 7 running
http://forum.xda-developers.com/showthread.php?t=1688012
Basically in a nutshell:
1) Plug in TF101 to PC and make sure ADB debugging is enabled in Dev options on TF
2) Drivers will/should fail to install
3) Open Device manager
4) Right click the ! missing driver
5) Update driver > Point to extracted Universal Naked Drivers from Easyflasher thread
6) Drivers should install
7) Leave TF plugged into PC
8) Power TF off
9) Hold Volume Up & Power until the PC sounds the USB connect sound
10) TF is now in APX mode (Nothing on TF screen yet) drivers should install, check Device Manager, if it doesn't install, point it to the extracted Universal drivers folder again until they are installed
11) Follow instructions to use Easyflasher
12) Done

*Detection* said:
If you're building a 32bit Win 7 laptop, then no need for virtual machines, just use that laptop, this is the Easyflasher thread, you should only need to follow the couple of simple instructions once you have 32bit Win 7 running
http://forum.xda-developers.com/showthread.php?t=1688012
Basically in a nutshell:
1) Plug in TF101 to PC and make sure ADB debugging is enabled in Dev options on TF
2) Drivers will/should fail to install
3) Open Device manager
4) Right click the ! missing driver
5) Update driver > Point to extracted Universal Naked Drivers from Easyflasher thread
6) Drivers should install
7) Leave TF plugged into PC
8) Power TF off
9) Hold Volume Up & Power until the PC sounds the USB connect sound
10) TF is now in APX mode (Nothing on TF screen yet) drivers should install, check Device Manager, if it doesn't install, point it to the extracted Universal drivers folder again until they are installed
11) Follow instructions to use Easyflasher
12) Done
Click to expand...
Click to collapse
I am trying to get mine out of the reboot loop and cant seem to get it into APX mode to install the drivers.....any idea how go from here and have been trying step 9 above.
Will keep on trying to see if I can get it to work

Sicknote said:
I am trying to get mine out of the reboot loop and cant seem to get it into APX mode to install the drivers.....any idea how go from here and have been trying step 9 above.
Will keep on trying to see if I can get it to work
Click to expand...
Click to collapse
Need more info
What happens when you try to enter APX mode?
Which OS are you running on the PC?
Do the APX drivers install ?
etc etc etc

*Detection* said:
Need more info
What happens when you try to enter APX mode?
Which OS are you running on the PC?
Do the APX drivers install ?
etc etc etc
Click to expand...
Click to collapse
When i try to put it in APX mode, the screen goes black but pc does not see it. I have tried this bit lots of times and not sure if I'm missing something...
Have the drivers in a folder on my desk top. Have watched videos on YouTube but what i see is not happening when i try it...
OS is windows 7.
Drivers don't install.

Sicknote said:
When i try to put it in APX mode, the screen goes black but pc does not see it. I have tried this bit lots of times and not sure if I'm missing something...
Have the drivers in a folder on my desk top. Have watched videos on YouTube but what i see is not happening when i try it...
OS is windows 7.
Drivers don't install.
Click to expand...
Click to collapse
You're not going to be able to put the tablet into APX mode till you get the drivers installed correctly.
With the tablet connected to the computer and the tablet on, download the naked driver package. open up device manager and right click on Other Devices - APX and chose update driver. Chose browse and then go to where you downloaded the naked driver package. If it complains that they aren't signed, click install anyway. If successful, you should now be able to put your tablet in APX mode.

Xperia Z5 fastboot driver not installing

Hi,
I have a rooted Xperia Z5 and I would like to update my firmware to 32.2.A.0.305.
I used to do firmware updates many times before using flashtool on my windows 7 machine.
Recently I switched to windows 10 and now need to reinstall the fastboot driver.
I downloaded the driver from sonymobile webstie:
http://developer.sonymobile.com/downloads/drivers/fastboot-driver/
Unzipped the file, and got a directory with the "android_winusb.inf" file.
Booted the phone in "bootloader" mode via the TWRP recovery (LED on phone is blue).
The regular method of power down, volume up+connect to USB did not work. The LED was blue for a second and then turned off.
When in "bootloader/fastboot" mode, opened the windows "device manager" and found the problematic S1 device.
Right click on it, update driver, browse my computer, pointed to the directory where the ".inf" file is located.
Windows "makes sounds" as if it is installing the driver, but then gives an error:
"Windows found a driver software for your device but encountered an error while attempting to install it"
"Android ADB interface"
"The system cannot find the flie specified"
I have no idea what the problem is.
A few posts suggested that this might be a driver-signing problem with windows 10.
They suggested removing the "driver-signing" option and try. Did not work.
I also tried this with a virtual machine Windows 7 that I have installed, and got the same error, so I'm not sure it is a windows version problem.
I read in one place that this is an error with the location of the file and that it should be located under the "C:\Windows\WinSxS" directory.
Tried that as well, and no luck.
Does someone have any idea what the problem is?
Alernatively, if someone can explain or point me to a post of how to use fastboot and flashtool with linux,
that can also help.
Thank you.
Avi

driver signature verification
1. Goto START (windows icon);
2. Keep pressing SHIFT, klick POWER and RESTART
(shift is pressed all the time along);
3. Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button.
When your computer restarts you'll see a list of options.
4. Press F7 on your keyboard to select Disable driver signature enforcement.
Your computer will now restart and you’ll be able to install unsigned drivers.
This is firt to do, but didnt quite get it if you tried this allready. Greetings

Have the same problem. Disabled driver signature enforcement. Did not help

Are you sure it's disabled? Some pc's don't have the option to disable the driver signature enforcement. If that's the case you need to enter the bios settings and look for the tk keys and delete them, then restart your pc and you can install the fastboot driver.
Hope this helps

Had the same issue on my new setup.
This solved all my problems: https://forum.xda-developers.com/xperia-z/help/help-findiing-installin-s1boot-fastboot-t2218143

dim4x4 said:
Have the same problem. Disabled driver signature enforcement. Did not help
Click to expand...
Click to collapse
Disable driver signature enforcment then install flashtool drivers and select your phone drivers and fastboot drivers, it will ask you are you sure to install press yes and then in folder x10flasher you have fastboot and open cmd in that folder and just use fastboot. Cheers

L33Tgod said:
Disable driver signature enforcment then install flashtool drivers and select your phone drivers and fastboot drivers, it will ask you are you sure to install press yes and then in folder x10flasher you have fastboot and open cmd in that folder and just use fastboot. Cheers
Click to expand...
Click to collapse
Nice and cool - but we still dont have a Sony Xperia Z5 Driver from it in the List