Related
Hello,
I'm a noob here at XDA and working with Android. I was wondering if z4root is a good way to root my Huawei Impulse 4G(U8800-51). If not, what is the best way to root this device?
Sent from my Huawei U8800-51 using XDA App
Ref
You can try the GUIDE
[GUIDE] ROOT and CWM Recovery for Impulse 4G
ROOT for AT&T Impulse 4G (Huawei u8800-51)
NOTE: I take no credit for SuperOneClick, or the actual guide. I simply found it, simplified it, and reposed here. Thanks goes to CLShortFuse for SuperOneClick, and all the members at XDA-Developers, specifically in the Huawei Ideos x5 forum.
Also, I am not responsible for any bricked devices, loss of data, zombie infections, Rage fits, or thermonuclear warfare caused by this guide. Oh, and also, if you succeed, your warranty is now void. PLEASE follow the instructions to a T.
This guide is for Windows PCs. I don't have any guide for Linux or Mac, sorry.
This guide will teach you how to root and install ClockWorkMod Recovery your AT&T Impulse 4G, also known as the Huawei Impulse 4G.
PRE-ROOT REQUIREMENTS:
Put the device in ADB mode (Settings\Applications\Development\check USB Debugging)
STEP 1
Plug device into computer and let the drivers install.
CHECK to make sure the ADB driver installed (Right click "Computer" and click Manage, and click Device Manager) If 'Ideos' is in 'Other Devices', you will need to start at Step 2. If 'Android Composite ADB Interface' shows up in 'Android Phone', you are good to go to Step 3)
STEP 2 (Ideos in Other Devices)
When the device was plugged in, 'CD Drive (E:\) Mobile Partner' should have popped up for AutoPlay. If it did not, check 'Computer' to see if it has. If it hasn't, unplug the device and plug it back in. Once it shows up, go back into Device Manager from Step 1 and right click 'Ideos' in 'Other Devices' and select 'Update Driver'. Click on Install Driver Manually instead of Searh Online and browse to E:\drivers. This will install the ADB drivers needed to root.
STEP 3 (ADB Drivers Installed, now to root)
Now that your device has ADB drivers installed and working, download SuperOneClick v2.1 from http://forum.xda-developers.com/attachment.php?attachmentid=674200&d=1312258565
Extract all the files into a folder, and run SuperOneClick with Admin permissions (right click SuperOneClick, select Run as Administrator)
After SuperOneClick opens, simply click the 'Root' button on the top.
NOTE: It may freeze up a few times, as if it stopped responding. That is normal.
As it goes through its process, it will eventually stop and tell you 'busybox is not installed. Install?' Hit yes, and yes to all the other prompts. At the end, it will tell you that your device is now rooted. TA-DAAAAA. Reboot your device and the root is complete.
STEP 4 (CWM Time)
Download CWM here
http://forum.xda-developers.com/attachment.php?attachmentid=741968&d=1317928514
Turn the device off, and press and hold Volume Up, Down and Power buttons simultaneously. The AT&T logo will pop up, and then a pink-purple screen will pop up over it. Plug the device into your computer and let the drivers install. A popup may tell you some drivers didn't install, that's ok. A single, unnamed Removable Storage device will come up; open it. Take the 'recovery.img' file in there and rename it to 'recovery-backup.img', then copy the recovery-clockwork-5.0.2.6-u8800.img' to the storage device. Rename it to 'recovery.img'.
IMPORTANT: Make sure to 'Safely Remove Device' before unplugging!
After unplugging, remove the battery and reinsert it, and hold Volume Up and Power buttons to boot into CWM.
There you have it, Root and CWM. I've begun toying around with ROMs, I will try to port CM7.1 to this device, along with a customized, clean version of the stock ROM. Enjoy!
WaterDuffalo
Cool thank you I will give that a try. Ill post my results.
Sent from my Huawei U8800-51 using XDA App
Root
Thank you again for the info. Everything worked perfectly! My device is now rooted. Keep me posted if you get the ROM for CM7 for this device.
iTzPeters
Impulse 4G
i messed up
as i was trying to put on the cwm recovery onto my phone and it kept messing up i accedently deleted my real recovery img and i was wondering if anyone could download there stock huawei u8800-51 recovery.img onto here so i can put it back on my phone if you need root explorer to get it you can download this one to be able to get it and put it up so i can have it...
Update!
vantien said:
You can try the GUIDE
[GUIDE] ROOT and CWM Recovery for Impulse 4G
ROOT for AT&T Impulse 4G (Huawei u8800-51)
NOTE: I take no credit for SuperOneClick, or the actual guide. I simply found it, simplified it, and reposed here. Thanks goes to CLShortFuse for SuperOneClick, and all the members at XDA-Developers, specifically in the Huawei Ideos x5 forum.
Also, I am not responsible for any bricked devices, loss of data, zombie infections, Rage fits, or thermonuclear warfare caused by this guide. Oh, and also, if you succeed, your warranty is now void. PLEASE follow the instructions to a T.
This guide is for Windows PCs. I don't have any guide for Linux or Mac, sorry.
This guide will teach you how to root and install ClockWorkMod Recovery your AT&T Impulse 4G, also known as the Huawei Impulse 4G.
PRE-ROOT REQUIREMENTS:
Put the device in ADB mode (Settings\Applications\Development\check USB Debugging)
STEP 1
Plug device into computer and let the drivers install.
CHECK to make sure the ADB driver installed (Right click "Computer" and click Manage, and click Device Manager) If 'Ideos' is in 'Other Devices', you will need to start at Step 2. If 'Android Composite ADB Interface' shows up in 'Android Phone', you are good to go to Step 3)
STEP 2 (Ideos in Other Devices)
When the device was plugged in, 'CD Drive (E:\) Mobile Partner' should have popped up for AutoPlay. If it did not, check 'Computer' to see if it has. If it hasn't, unplug the device and plug it back in. Once it shows up, go back into Device Manager from Step 1 and right click 'Ideos' in 'Other Devices' and select 'Update Driver'. Click on Install Driver Manually instead of Searh Online and browse to E:\drivers. This will install the ADB drivers needed to root.
STEP 3 (ADB Drivers Installed, now to root)
Now that your device has ADB drivers installed and working, download SuperOneClick v2.1 from http://forum.xda-developers.com/attachment.php?attachmentid=674200&d=1312258565
Extract all the files into a folder, and run SuperOneClick with Admin permissions (right click SuperOneClick, select Run as Administrator)
After SuperOneClick opens, simply click the 'Root' button on the top.
NOTE: It may freeze up a few times, as if it stopped responding. That is normal.
As it goes through its process, it will eventually stop and tell you 'busybox is not installed. Install?' Hit yes, and yes to all the other prompts. At the end, it will tell you that your device is now rooted. TA-DAAAAA. Reboot your device and the root is complete.
STEP 4 (CWM Time)
Download CWM here
http://forum.xda-developers.com/attachment.php?attachmentid=741968&d=1317928514
Turn the device off, and press and hold Volume Up, Down and Power buttons simultaneously. The AT&T logo will pop up, and then a pink-purple screen will pop up over it. Plug the device into your computer and let the drivers install. A popup may tell you some drivers didn't install, that's ok. A single, unnamed Removable Storage device will come up; open it. Take the 'recovery.img' file in there and rename it to 'recovery-backup.img', then copy the recovery-clockwork-5.0.2.6-u8800.img' to the storage device. Rename it to 'recovery.img'.
IMPORTANT: Make sure to 'Safely Remove Device' before unplugging!
After unplugging, remove the battery and reinsert it, and hold Volume Up and Power buttons to boot into CWM.
There you have it, Root and CWM. I've begun toying around with ROMs, I will try to port CM7.1 to this device, along with a customized, clean version of the stock ROM. Enjoy!
WaterDuffalo
Click to expand...
Click to collapse
Do you know how to update to Gingerbread 2.3? Please reply ASAP!
vantien said:
You can try the GUIDE
[GUIDE] ROOT and CWM Recovery for Impulse 4G
ROOT for AT&T Impulse 4G (Huawei u8800-51)
NOTE: I take no credit for SuperOneClick, or the actual guide. I simply found it, simplified it, and reposed here. Thanks goes to CLShortFuse for SuperOneClick, and all the members at XDA-Developers, specifically in the Huawei Ideos x5 forum.
Also, I am not responsible for any bricked devices, loss of data, zombie infections, Rage fits, or thermonuclear warfare caused by this guide. Oh, and also, if you succeed, your warranty is now void. PLEASE follow the instructions to a T.
This guide is for Windows PCs. I don't have any guide for Linux or Mac, sorry.
This guide will teach you how to root and install ClockWorkMod Recovery your AT&T Impulse 4G, also known as the Huawei Impulse 4G.
PRE-ROOT REQUIREMENTS:
Put the device in ADB mode (Settings\Applications\Development\check USB Debugging)
STEP 1
Plug device into computer and let the drivers install.
CHECK to make sure the ADB driver installed (Right click "Computer" and click Manage, and click Device Manager) If 'Ideos' is in 'Other Devices', you will need to start at Step 2. If 'Android Composite ADB Interface' shows up in 'Android Phone', you are good to go to Step 3)
STEP 2 (Ideos in Other Devices)
When the device was plugged in, 'CD Drive (E:\) Mobile Partner' should have popped up for AutoPlay. If it did not, check 'Computer' to see if it has. If it hasn't, unplug the device and plug it back in. Once it shows up, go back into Device Manager from Step 1 and right click 'Ideos' in 'Other Devices' and select 'Update Driver'. Click on Install Driver Manually instead of Searh Online and browse to E:\drivers. This will install the ADB drivers needed to root.
STEP 3 (ADB Drivers Installed, now to root)
Now that your device has ADB drivers installed and working, download SuperOneClick v2.1 from http://forum.xda-developers.com/attachment.php?attachmentid=674200&d=1312258565
Extract all the files into a folder, and run SuperOneClick with Admin permissions (right click SuperOneClick, select Run as Administrator)
After SuperOneClick opens, simply click the 'Root' button on the top.
NOTE: It may freeze up a few times, as if it stopped responding. That is normal.
As it goes through its process, it will eventually stop and tell you 'busybox is not installed. Install?' Hit yes, and yes to all the other prompts. At the end, it will tell you that your device is now rooted. TA-DAAAAA. Reboot your device and the root is complete.
STEP 4 (CWM Time)
Download CWM here
http://forum.xda-developers.com/attachment.php?attachmentid=741968&d=1317928514
Turn the device off, and press and hold Volume Up, Down and Power buttons simultaneously. The AT&T logo will pop up, and then a pink-purple screen will pop up over it. Plug the device into your computer and let the drivers install. A popup may tell you some drivers didn't install, that's ok. A single, unnamed Removable Storage device will come up; open it. Take the 'recovery.img' file in there and rename it to 'recovery-backup.img', then copy the recovery-clockwork-5.0.2.6-u8800.img' to the storage device. Rename it to 'recovery.img'.
IMPORTANT: Make sure to 'Safely Remove Device' before unplugging!
After unplugging, remove the battery and reinsert it, and hold Volume Up and Power buttons to boot into CWM.
There you have it, Root and CWM. I've begun toying around with ROMs, I will try to port CM7.1 to this device, along with a customized, clean version of the stock ROM. Enjoy!
WaterDuffalo
Click to expand...
Click to collapse
I did fine until I reached step three, run as administrator. I left the password box blank and I am getting a cannot leave password blank message. My computer is not password protected. Any ideas? I am running windows xp.
outlaw4550
vantien said:
You can try the GUIDE
[GUIDE] ROOT and CWM Recovery for Impulse 4G
ROOT for AT&T Impulse 4G (Huawei u8800-51)
NOTE: I take no credit for SuperOneClick, or the actual guide. I simply found it, simplified it, and reposed here. Thanks goes to CLShortFuse for SuperOneClick, and all the members at XDA-Developers, specifically in the Huawei Ideos x5 forum.
Also, I am not responsible for any bricked devices, loss of data, zombie infections, Rage fits, or thermonuclear warfare caused by this guide. Oh, and also, if you succeed, your warranty is now void. PLEASE follow the instructions to a T.
This guide is for Windows PCs. I don't have any guide for Linux or Mac, sorry.
This guide will teach you how to root and install ClockWorkMod Recovery your AT&T Impulse 4G, also known as the Huawei Impulse 4G.
PRE-ROOT REQUIREMENTS:
Put the device in ADB mode (Settings\Applications\Development\check USB Debugging)
STEP 1
Plug device into computer and let the drivers install.
CHECK to make sure the ADB driver installed (Right click "Computer" and click Manage, and click Device Manager) If 'Ideos' is in 'Other Devices', you will need to start at Step 2. If 'Android Composite ADB Interface' shows up in 'Android Phone', you are good to go to Step 3)
STEP 2 (Ideos in Other Devices)
When the device was plugged in, 'CD Drive (E:\) Mobile Partner' should have popped up for AutoPlay. If it did not, check 'Computer' to see if it has. If it hasn't, unplug the device and plug it back in. Once it shows up, go back into Device Manager from Step 1 and right click 'Ideos' in 'Other Devices' and select 'Update Driver'. Click on Install Driver Manually instead of Searh Online and browse to E:\drivers. This will install the ADB drivers needed to root.
STEP 3 (ADB Drivers Installed, now to root)
Now that your device has ADB drivers installed and working, download SuperOneClick v2.1 from http://forum.xda-developers.com/attachment.php?attachmentid=674200&d=1312258565
Extract all the files into a folder, and run SuperOneClick with Admin permissions (right click SuperOneClick, select Run as Administrator)
After SuperOneClick opens, simply click the 'Root' button on the top.
NOTE: It may freeze up a few times, as if it stopped responding. That is normal.
As it goes through its process, it will eventually stop and tell you 'busybox is not installed. Install?' Hit yes, and yes to all the other prompts. At the end, it will tell you that your device is now rooted. TA-DAAAAA. Reboot your device and the root is complete.
STEP 4 (CWM Time)
Download CWM here
http://forum.xda-developers.com/attachment.php?attachmentid=741968&d=1317928514
Turn the device off, and press and hold Volume Up, Down and Power buttons simultaneously. The AT&T logo will pop up, and then a pink-purple screen will pop up over it. Plug the device into your computer and let the drivers install. A popup may tell you some drivers didn't install, that's ok. A single, unnamed Removable Storage device will come up; open it. Take the 'recovery.img' file in there and rename it to 'recovery-backup.img', then copy the recovery-clockwork-5.0.2.6-u8800.img' to the storage device. Rename it to 'recovery.img'.
IMPORTANT: Make sure to 'Safely Remove Device' before unplugging!
After unplugging, remove the battery and reinsert it, and hold Volume Up and Power buttons to boot into CWM.
There you have it, Root and CWM. I've begun toying around with ROMs, I will try to port CM7.1 to this device, along with a customized, clean version of the stock ROM. Enjoy!
WaterDuffalo
Click to expand...
Click to collapse
Hi, I know this post is old, but I got one U8800-51 with damaged charge port and I couldn't find any root strategy using some root APK. I've used KingRoot, KingoRoot, Poot (with Ministro libraries), FramaRoot, TowelRoot, z4root, GingerBreak and nothing happens. Always says "Error". I'm using Android Froyo 2.2 in that phone.
I regret reliving this old post, but I do it out of mere necessity. I live in Venezuela and this mobile phone here is still common.
I see as a last resort repair the charge port, but for now I do not have the necessary resources.
I appreciate the help you can give me.
Hello, please be patient with me. I need to install a cwm to change a korean rom, but when i go to the market and install the rom manager, when i click, says that my phone is not on the list. My phone is a korean vega 5 im-t100k and i've found a download web for this phone http://mizal.net:82/pantech/NO.5. And i've found this CWM_6.0.19_For_T100K.zip to download. ok, when i decompress, it appears a directory with 6 files: adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll, installer.bat and recovery.img. Well, i've rooted my phone with unlock root and superuser works ok. I've installed adb in my windows 8 and i have access to my vega 5. Ok, I connect windows 8 with my phone in debuggin mode and transfer files with no problem. Ok, i've opened the directory with the 6 files and clicked on installer, it appears the terminal and says is looking for device, but nothing else. Please i've been looking information all around the web but it's all a mess. Please someone would be so kind to tell me how to do it step by step?. Thank you very much in advance, i'm desperated.
You need to have the phone's drivers installed on your computer. Try connecting the phone in USB Debugging mode and install the drivers. You can check the device manager in control panel to see if you have working drivers or not.
Let me know if it didn't work.
work
Hi all first off I'm sorry if this has been posted before but I'm having a problem unbricking an Asus transformer tf101 B60, I'll start with what's going on or not for that matter. lol
1. Boot to recovery is CWM-Based Recovery v5.5.0.4 roach-tf101-r2
2. will not see sd card / backup-restore= -2014-04-05.02.52.56 / no files found
3. Choose a zip = e: can't open /sdcard/update.zip
4.PC windows 7 pro 64 bit will not see the tablet when plugged into usb getting unrecognized device,force driver still getting yellow ding=device cannot start
if I plug in the usb and turn on the tablet windows does not even see that and unit sits on logo screen. and other screen the cold lynx boot that hangs there.
So in short I'm hitting a brick wall, windows won't see it, it won't see the SD card in recovery mode.
I've read in these posts how to fix this problem and have all the software / firmware you name it, but they all say almost the same thing, windows needs to see the device in order for any of these fixes to work, and thus is my wall I'm hitting.
Any help to find a solution to this problem would be oh so thankful to you all and call you Tablet Gods, this was a tablet given to me as a paper weight and I thought if it boots it can be fixed?
Thanks for your time and God like tablet knowledge.
Cheers.
Install the APX drivers (Universal Naked Drivers) and use the tool "Easyflasher" to flash TWRP recovery (Forget CWM) both from this link
http://forum.xda-developers.com/showthread.php?t=1688012
You might need to install the APX drivers manually using Device Manager
If you find that the PC still does not see the TF101, you might need a new cable
Driver Not Working
*Detection* said:
Install the APX drivers (Universal Naked Drivers) and use the tool "Easyflasher" to flash TWRP recovery (Forget CWM) both from this link
http://forum.xda-developers.com/showthread.php?t=1688012
You might need to install the APX drivers manually using Device Manager
If you find that the PC still does not see the TF101, you might need a new cable
Click to expand...
Click to collapse
I booted the unit into recover mode and windows sees unknown device..Ok
Tried to install new naked driver and getting a splash saying not compatible with windows 64 bit, I tried this on a brand new windows 7 pro 32 bit laptop and got the same results. I do have a brand new usb cable for it thinking that the old one was faulty, tried adb again same thing no device found, are there any commands in terminal emulator that can force the driver on the usb port? I'm thinking that if windows sees an unknown device then at least it sees something there just not whats there? Am i wrong in that somehow it's lost the usb firmware connection? so the driver will not install and if forced does not make the connection to the device? So this is my results.
So I'm ready to put gun in mouth over this, my laptops going to divorce me over driver abuse and the tablet mocks me with the frozen Asus logo.
Again Thanks for all the advice and i'll keep slugging it out.As this unit is in perfect condition outside of the Bricked part
You don't need to boot it into recovery mode to start with, just install the drivers normally first with the TF101 connected and booted normally
It's always going to say it can't find the device if the driver isn't installed
Focus on getting that APX driver installed and working, once you have that installed, Im pretty sure it will see the device fine
Asus TF101 B60 Softbrick? What Now?
Hello all.
I've been searching in vain for an answer to my Bricked Asus tf101? I'm just going to get right to the problem.
I can't get the tablet to be seen by windows 7 pro 64bit, Unknown device and yes I've tried everything, except asking if there's a way to force connection through a terminal like I've seen done with a router and a network switch to force a flash file so as to get at least a response after a reboot instead of just the Asus splash screen, here's a summary.
The Good.
1. I can boot to recovery CWM-based recovery v5.5.0.4 roach-tf101-r2 with menu's
Bad: Does not see sd card only see's internal and there's no file or folder error for backup/restore
2.Boots to screen with 2 icons data wipe and linix cold boot and goes nowhere from there just hangs.
So I'm stuck here, I have all to tools to do the job only if windows would see it, Adb does not see device which means the same thing no driver no fix,
Everywhere I read it says do this and that and it will restore to factory, that would be great if windows saw the thing, so I'm looking for a way to get the tablet to boot to something other than a loop. also tried the put the E101_SDUPDATE.zip in the root of the SD card and restart, does not see the card or file or both so it's not loading the file?
1. windows 7 not seeing device, will not take force drivers, Universal-Nvidia-Asus- MTP
2. recovery does not see sd card, so can't flash new anything?
3. So no communication from SD/USB
4. Is there a terminal command I can use to force a Blob or flash a recovery to the tablet when drivers and USB don't respond?
And to top that off my laptop filed for divorce for driver abuse..lol I'm not giving up.
Thanks to you all,
I want to thank you all for your time and advice it is very much appreciated, and I'll keep slugging away because I know there's a fix out there.
Cheers.
Drivers need to be signed in 64bit windows, use 32bit Win 7 either on another machine or in VMWare or Virtualbox etc
Then the drivers should install
Thanks
*Detection* said:
Drivers need to be signed in 64bit windows, use 32bit Win 7 either on another machine or in VMWare or Virtualbox etc
Then the drivers should install
Click to expand...
Click to collapse
Thanks for the Advice, Is there a thread outlining this so I can give it a try? I do have a new laptop I'm building out with windows 7 Pro 32bit as I've had so much trouble with the 64bit version.
If you're building a 32bit Win 7 laptop, then no need for virtual machines, just use that laptop, this is the Easyflasher thread, you should only need to follow the couple of simple instructions once you have 32bit Win 7 running
http://forum.xda-developers.com/showthread.php?t=1688012
Basically in a nutshell:
1) Plug in TF101 to PC and make sure ADB debugging is enabled in Dev options on TF
2) Drivers will/should fail to install
3) Open Device manager
4) Right click the ! missing driver
5) Update driver > Point to extracted Universal Naked Drivers from Easyflasher thread
6) Drivers should install
7) Leave TF plugged into PC
8) Power TF off
9) Hold Volume Up & Power until the PC sounds the USB connect sound
10) TF is now in APX mode (Nothing on TF screen yet) drivers should install, check Device Manager, if it doesn't install, point it to the extracted Universal drivers folder again until they are installed
11) Follow instructions to use Easyflasher
12) Done
*Detection* said:
If you're building a 32bit Win 7 laptop, then no need for virtual machines, just use that laptop, this is the Easyflasher thread, you should only need to follow the couple of simple instructions once you have 32bit Win 7 running
http://forum.xda-developers.com/showthread.php?t=1688012
Basically in a nutshell:
1) Plug in TF101 to PC and make sure ADB debugging is enabled in Dev options on TF
2) Drivers will/should fail to install
3) Open Device manager
4) Right click the ! missing driver
5) Update driver > Point to extracted Universal Naked Drivers from Easyflasher thread
6) Drivers should install
7) Leave TF plugged into PC
8) Power TF off
9) Hold Volume Up & Power until the PC sounds the USB connect sound
10) TF is now in APX mode (Nothing on TF screen yet) drivers should install, check Device Manager, if it doesn't install, point it to the extracted Universal drivers folder again until they are installed
11) Follow instructions to use Easyflasher
12) Done
Click to expand...
Click to collapse
I am trying to get mine out of the reboot loop and cant seem to get it into APX mode to install the drivers.....any idea how go from here and have been trying step 9 above.
Will keep on trying to see if I can get it to work
Sicknote said:
I am trying to get mine out of the reboot loop and cant seem to get it into APX mode to install the drivers.....any idea how go from here and have been trying step 9 above.
Will keep on trying to see if I can get it to work
Click to expand...
Click to collapse
Need more info
What happens when you try to enter APX mode?
Which OS are you running on the PC?
Do the APX drivers install ?
etc etc etc
*Detection* said:
Need more info
What happens when you try to enter APX mode?
Which OS are you running on the PC?
Do the APX drivers install ?
etc etc etc
Click to expand...
Click to collapse
When i try to put it in APX mode, the screen goes black but pc does not see it. I have tried this bit lots of times and not sure if I'm missing something...
Have the drivers in a folder on my desk top. Have watched videos on YouTube but what i see is not happening when i try it...
OS is windows 7.
Drivers don't install.
Sicknote said:
When i try to put it in APX mode, the screen goes black but pc does not see it. I have tried this bit lots of times and not sure if I'm missing something...
Have the drivers in a folder on my desk top. Have watched videos on YouTube but what i see is not happening when i try it...
OS is windows 7.
Drivers don't install.
Click to expand...
Click to collapse
You're not going to be able to put the tablet into APX mode till you get the drivers installed correctly.
With the tablet connected to the computer and the tablet on, download the naked driver package. open up device manager and right click on Other Devices - APX and chose update driver. Chose browse and then go to where you downloaded the naked driver package. If it complains that they aren't signed, click install anyway. If successful, you should now be able to put your tablet in APX mode.
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Not rebooting automatically after fastboot continue command
sevenr33 said:
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Click to expand...
Click to collapse
Hi, I've followed the instructions you gave and now I'm stucked at the part which it wouldn't reboot by itself after i typed the "fastboot command".
1) Before I've had chance to charge my phone, it ran out of battery and fastboot mode does not charge the phone. I've also tried to flash the recovery image in fastboot mode, but i got Err:0x2017, what is this error about?
2) And the GUI should run in location bin files as my fastboot driver, not the 0KB fastboot in default location.
2) Do all these steps require unlocking bootloader? I don't think I've unlocked, all I did was just root the phone.
Help
Hi
I have a rooted Huawei Ascend Mate but I installed the wrong TWRP recovery a few days ago. My phone keeps booting and I can't use my recovery, because it is a touch version but it doesn't respond to my touch. So, I don't know if I can flash my stock rom or another recovery...
Can I use this tutorial to fix my phone or can you please make one for the Huawei Ascend Mate?
kind regards
Hi,
I have a rooted Xperia Z5 and I would like to update my firmware to 32.2.A.0.305.
I used to do firmware updates many times before using flashtool on my windows 7 machine.
Recently I switched to windows 10 and now need to reinstall the fastboot driver.
I downloaded the driver from sonymobile webstie:
http://developer.sonymobile.com/downloads/drivers/fastboot-driver/
Unzipped the file, and got a directory with the "android_winusb.inf" file.
Booted the phone in "bootloader" mode via the TWRP recovery (LED on phone is blue).
The regular method of power down, volume up+connect to USB did not work. The LED was blue for a second and then turned off.
When in "bootloader/fastboot" mode, opened the windows "device manager" and found the problematic S1 device.
Right click on it, update driver, browse my computer, pointed to the directory where the ".inf" file is located.
Windows "makes sounds" as if it is installing the driver, but then gives an error:
"Windows found a driver software for your device but encountered an error while attempting to install it"
"Android ADB interface"
"The system cannot find the flie specified"
I have no idea what the problem is.
A few posts suggested that this might be a driver-signing problem with windows 10.
They suggested removing the "driver-signing" option and try. Did not work.
I also tried this with a virtual machine Windows 7 that I have installed, and got the same error, so I'm not sure it is a windows version problem.
I read in one place that this is an error with the location of the file and that it should be located under the "C:\Windows\WinSxS" directory.
Tried that as well, and no luck.
Does someone have any idea what the problem is?
Alernatively, if someone can explain or point me to a post of how to use fastboot and flashtool with linux,
that can also help.
Thank you.
Avi
driver signature verification
1. Goto START (windows icon);
2. Keep pressing SHIFT, klick POWER and RESTART
(shift is pressed all the time along);
3. Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button.
When your computer restarts you'll see a list of options.
4. Press F7 on your keyboard to select Disable driver signature enforcement.
Your computer will now restart and you’ll be able to install unsigned drivers.
This is firt to do, but didnt quite get it if you tried this allready. Greetings
Have the same problem. Disabled driver signature enforcement. Did not help
Are you sure it's disabled? Some pc's don't have the option to disable the driver signature enforcement. If that's the case you need to enter the bios settings and look for the tk keys and delete them, then restart your pc and you can install the fastboot driver.
Hope this helps
Had the same issue on my new setup.
This solved all my problems: https://forum.xda-developers.com/xperia-z/help/help-findiing-installin-s1boot-fastboot-t2218143
dim4x4 said:
Have the same problem. Disabled driver signature enforcement. Did not help
Click to expand...
Click to collapse
Disable driver signature enforcment then install flashtool drivers and select your phone drivers and fastboot drivers, it will ask you are you sure to install press yes and then in folder x10flasher you have fastboot and open cmd in that folder and just use fastboot. Cheers
L33Tgod said:
Disable driver signature enforcment then install flashtool drivers and select your phone drivers and fastboot drivers, it will ask you are you sure to install press yes and then in folder x10flasher you have fastboot and open cmd in that folder and just use fastboot. Cheers
Click to expand...
Click to collapse
Nice and cool - but we still dont have a Sony Xperia Z5 Driver from it in the List