Hello ! I recently installed Cool3D Runnymede Sense 3.5 Bravo v.7 on my HTC Desire and after install the ClockWorkMode stucked. I pulled out the battery for the first boot. After this, the ROM worked just fine until I saw some annoying problems like this: network signal is ok but it appears a „No service” message, WhatsApp couldn’t find what model of phone i have (I couldn’t set it) and the most important thing... Mobile Networks settings menu is INCOMPLETE !!! It contains just Roaming settings, no APN, no Network Operators ... none of the rest that are normally there. Anyone knows what is happening here ?! Please help me. I’m not expert in this sort of problems. (I flashed the ROM after full wipe... on previous CM7)
Related
Hello I'm new here and had a question about my htc inspire or desire. somebody installed a custom rom I guess to unlock the phone for me everything works but the wifi seems to be not working. Its connected to the router and it shows gr8 signal also shows its connected but some how I dont have any data or access to the internet it says web page cannot display? and I cant use android apps or market or gmail. Plz help thanks
i Have same issue, its driving me mad.
Help Please.
My problem solved. It was caused by the custom rom. So what you can do is try to go back with the stock rom or install a new rom and flash it. Make sure you have backed up all your stock rom so incase if something goes wrong you can get back to your old rom.
Hi everyone! I am posting this here because I need 10 post to post in the right tread...
So my problem is this: I installed the aurora 4.0.3 custom rom that seems to work great but I cant connect to the internet... (wlan works great)
I had before this oxygen custom ROM wich worked good but decided to try android 4. when I installed the newest official update...(i think it was 2.3.5 or something like that, looked newer that 2.3 almost like 4.0)... the internet did not work at that point eather (after the install) The apn settings wont SAVE!!
They just dissapear after I press save when everything is correctly written! well I tought that installing the custom rom would fix it... well it didnt...
I installed everything correctly, recoveries, deleted stuff from recovery etc.
One thing I tought that will changing a new SIM card fix this?
IDK what to do now, please help me!!
Oh my operator is Saunalahti from Finland (im there too...)
EDIT: I tried with my brothers sim card wich has a different operator, dna and the internet worked fine. there was also all the apn settings, dna internet and mms. switched back to mine and still not working. could the SIM card get any damage while installing new firmwares and custom roms? I had mine in the phone under the installs if it matters.
Anyone? and if you thinky I write bad and messy, I am not so great at english but I hope you understand : )
Noone knows on this site how to get my apn settings to work???
btw they worked today for like 5 mins then I rebooted and they where gone again...
Hello everyone, I'm new to xda but not new to rooting and stuff
However I need help
I rooted my Wildfire a while ago..and then i installed some font...which messed my stock rom
receving no technical support over email or service centre, i manually flashed cm7
...
all goinig well but there is no 3g connection at all...the phone keeps on rebooting when i turn on 3g....and 2g is incredibly slow!!!!!!!!!!
I hvnt s off 'ed my wf but hv rooted it successfully..I'd like to know if s off is needed for radio flash...pl help me
How should I s-off my rooted wf??
Hello, i solved this issue.. I was on the radio 3.35.20.10 which is the newest. I flashed the latest rc1 cm7.2. Yes (3g and H) mobile network works flawlessly.. changing a few type of internet build prop values of cm7.2 will lead to rebooting when turning on mobile data
I won't be of any help but I have the same problem: I can't remember when I have noticed it the first time - my Wildfire keeps on rebooting if I switch to 3G.
Initially I thought that one of the different modes (2g/3g only, 2g or 3g etc.) would cause the problem but I have tried everything without any success.
If I find the time I'll probably try a newer nightly to see if this will help.
AFAIK I'm on the newest radio (flashed it a while back due to the well known radio problem).
Anyone with a helpful hint?
ontheflames said:
Hello, i solved this issue.. I was on the radio 3.35.20.10 which is the newest. I flashed the latest rc1 cm7.2. Yes (3g and H) mobile network works flawlessly.. changing a few type of internet build prop values of cm7.2 will lead to rebooting when turning on mobile data
Click to expand...
Click to collapse
Hm, I'm not sure about your solution - could you be a bit more specific? I've already done a lot of things to get rid of the problem - including flashing newer versions of CM7 - currently I'm on the 20120420 nightly. Release date for the newest RC1 is 20120314 if I'm correct - so it looks that this didn't solve my problem.
Furthermore I flashed the radio again (inspired by this thread) - without any help regarding the bootloops. I'm really close to do an RUU update - but I usually rely on good old traditional computer wisdom: "never change a running system" XD
If someone with a bit more understanding of the changes in build.prop could give hints what (which values) exactly could be the reason for the problem this would be really helpful.
Hey guys, I've flashed the UltiMIUIcs http://forum.xda-developers.com/showthread.php?t=1550689 after flashing, I can't seem to turn on the wi-fi. I've flashed other ROMs too, wiped the cache, factory reset...so I can't seem to find a solution. Can anyone help me?
First of all, check if the mac adress on wifi works. Secondly, i had the same issue on my HTC HD2 and therefor i used a small programm called 'Task 29'. It erases all your phone memory and after that i began to flash a new rom. And than Wifi worked again! I don't know if Task 29 is available on your phone. Otherwise, if i were you i'd flashed the rom again or otherwise try to flash a different kernel (maybe it is kernel related, i suggest to search in the thread if others users have the same problem)
Greetings,
Arjan
well i got a problem at i install Android 4.0.3 (Ice Cream Sandwich) + Sense UI 3.6 + Beats Audio and my wifi calling is no working i need to unchek the the location marks and when i go the wifi calling it say enabling but it never come on top im been searching but i dont know whats the cause if theres a solution to that or someone knows please send message here or private really will like the help
Hello, i have the same problem
i updated to 4.0.3 and after update, my wifi has began not to work.
abnormal resets have been occuring.
is anyone who solved this problem?
thanks in advance.
I just flashed for the first time and everything seemed fine,
till (after flashing the Gapps) I noticed my phone won't connect to a mobile network.
WiFi is working, only Mobile Network is defunct.
I tried two different SIMs, both worked on other devices but not on this.
I may be wrong, but I don't think a locked SIM is my problem, since I don't see any SIM-with-an-exclamation icon icon as described in other posts.
Detailed Description:
Lock-screen shows the text "(No Service)".
When trying to search for a network in Settings > Mobile Networks > Network Operators, it says "Error while searching for networks".
Additional Info:
Device: LG P-500.
Flashing toolchain: Gingerbreak; ROM Manager + CWM.
Flashed: Stable CM7.2 from CM's site;
Gapps from Goo.im.
Baseband: P500-M76XX-V10f-FEB-18-2011-XX.
(Taken by LGMDP AFTER flashing to CM7)
P.S. Before posting I looked for similar posts, but could only find ones dealing with the New Baseband (e.g. http://forum.xda-developers.com/sho...&highlight=error+while+searching+for+networks). As I have the Old Baseband and CM7.2 requires the Old Baseband (so it seems), they seemed irrelevant.
Thanks in advance!
Cm needs new baseband. There's your problem.
As a substitute, chech the cm7.2 development thread in the original work category. The first post provides a temporarely fix.
Sent from my LG-P500 using xda premium
Mine got strange problem:
After flashing ROM PowerGB X 1.0, everything works fine (sms receive & send, Internet via mobile / Wifi, calling outside) but only one problem, I cannot receive call! When I call from outside to my P500 no, the network always says busy or I've requested to block my phone from outside.
I've check all settings regarding call blocking, but all is normal.
Thanks, thatnextdoorboy!
I've updated to the new baseband (using the LGMDP guide) and it now works great!
I think that this guide is a bit unclear, reading it it seems that only CM7.2 Nightlies require the new, while the Stable version doesn't.
Thanks again! (You're actually pretty nice to newbies around here...)