[Q] Huawei ideos x5 (U8800) APN settings wont save, NEED HELP ASAP - General Questions and Answers

Hi everyone! I am posting this here because I need 10 post to post in the right tread...
So my problem is this: I installed the aurora 4.0.3 custom rom that seems to work great but I cant connect to the internet... (wlan works great)
I had before this oxygen custom ROM wich worked good but decided to try android 4. when I installed the newest official update...(i think it was 2.3.5 or something like that, looked newer that 2.3 almost like 4.0)... the internet did not work at that point eather (after the install) The apn settings wont SAVE!!
They just dissapear after I press save when everything is correctly written! well I tought that installing the custom rom would fix it... well it didnt...
I installed everything correctly, recoveries, deleted stuff from recovery etc.
One thing I tought that will changing a new SIM card fix this?
IDK what to do now, please help me!!
Oh my operator is Saunalahti from Finland (im there too...)
EDIT: I tried with my brothers sim card wich has a different operator, dna and the internet worked fine. there was also all the apn settings, dna internet and mms. switched back to mine and still not working. could the SIM card get any damage while installing new firmwares and custom roms? I had mine in the phone under the installs if it matters.

Anyone? and if you thinky I write bad and messy, I am not so great at english but I hope you understand : )

Noone knows on this site how to get my apn settings to work???
btw they worked today for like 5 mins then I rebooted and they where gone again...

Related

Still No phoe signal But Everything else works help Please

I Updated my tilt phone to (Dutty_s_WM6.1_Official_UC_5.2.19199_RTM)
and now i have no phone signal.. Tired Alot of different raidos but still no fixes..i need my phone dont want to go back to my old one somebody help....
I have Also have flashed diffrent rom still same problem... could it be my sims card?
although it does work on my old phone
flashed the orignal and still nothing
HELP I NEED MY PHONE
Maybe someone can tell me why would it have changed going to the new up date .... but if i go back to duttys previous ver. it doesnt work ?????
WILLIEGONZA said:
I Updated my tilt phone to (Dutty_s_WM6.1_Official_UC_5.2.19199_RTM)
and now i have no phone signal.. Tired Alot of different raidos but still no fixes..i need my phone dont want to go back to my old one some body help....
I have Also have flashed diffrent rom still same problem
Click to expand...
Click to collapse
I'm not sure why this is happening to you, there is a test rom on the wiki somewhere try flashing one of the test roms here sorry i cant help more,
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Go to the Comm Manager and make sure the Phone is turned On and Flight Mode is OFF
This has happened to me with a few ROMS.
wish it was that easy but no
When i bought my tytn 2 i had same problem .
try to go in SETTING/PERSONAL/PHONE
then select tags BAND in the bottom of screen.
Usually you'll find :
Select your network type = Auto
Select your GSM/UTMS band = Auto
Try to force this parameters according your mobile company .
then make a Network selection manually .
I hope this help you.
Ciao
Luca
tried that 2 nothing
The only other thing that helped when this happened to me was to flash the Original Shipped ROM.
i hate myself should of left your first one alone.... flash that old one and still the same..phones still not working
But even in a manual search didn't show any phone company?
I have the same signal problem here. I trying to get a AT&T Tilt to work here in Brazil. Tried all available ROMs and Radios. Tried every available configuration stteing on the phone (band, connection etc). Flashed the phone back to the original ROM(adn Rdaio) and NOTHING.
I still waiting a miracle from heaven!
goingtobrazil said:
I have the same signal problem here. I trying to get a AT&T Tilt to work here in Brazil. Tried all available ROMs and Radios. Tried every available configuration stteing on the phone (band, connection etc). Flashed the phone back to the original ROM(adn Rdaio) and NOTHING.
I still waiting a miracle from heaven!
Click to expand...
Click to collapse
Tim , Vivo or Claro?
I resolved on mine (tim) with follow:
try to go in SETTING/PERSONAL/PHONE
then select tags BAND in the bottom of screen.
Usually you'll find :
Select your network type = Auto
Select your GSM/UTMS band = Auto
Try to force this parameters according your mobile company .
then make a Network selection manually .
Ciao
Luca
showed att operator picked that then it asked to restart and still nothing
WILLIEGONZA said:
showed att operator picked that then it asked to restart and still nothing
Click to expand...
Click to collapse
You have a BAAAAAAAAD ROM flash....
Take a deep breath and relax. I suggest hard reset first then remove your SIM card and re-insert. make sure the cut out edge of the SIM is the out side not on the inserted side.
Make sure you have a ROM, and i would suggest one that does NOT have the radio cooked with it. It can be Dutty's or Sleuth. I recommend Sleuth's ROM for I find it more robust. Flash properly and you will have your phone back.
BTW... remove your SD ( Memory Card ) before you start the flash.
Good luck.

Lost 3g - Paradox V1 ROM

Hey guys. I lost my 3g after installing this version of ROM (Paradox V1). With previous DroidJelly V1 version I didn't have any problems with this. I did everything well with installation, this is not my first installed ROM. I'm 100% sure that I dont have simlock. When I reinstalled to stock, my 3g back. So this is not a problem with my sim card or provider. Disabling/Enabling Data traffic or on/off Plane mode dont help
the difference between droidjelly and paradox is just rhe name, same developer, same rom, try downloading the files again and if you still experience problems reflash stock rom
Sent from my ST21i using Tapatalk 2
Same Issue...
Zeuskk said:
Hey guys. I lost my 3g after installing this version of ROM (Paradox V1). With previous DroidJelly V1 version I didn't have any problems with this. I did everything well with installation, this is not my first installed ROM. I'm 100% sure that I dont have simlock. When I reinstalled to stock, my 3g back. So this is not a problem with my sim card or provider. Disabling/Enabling Data traffic or on/off Plane mode dont help
Click to expand...
Click to collapse
I got the same problem... First I believed my sim card was locked, nishuy21 help me and sugest that posibility, butI got my sim cheked, and no, It's no locked!!! and I los my 3g too when i flahs the rom... by the way, aswome rom :good:... Any Ideas????
Thanks In advanced!!!!
Excuse my bad spelling....
Ok problem solved! I just clicked on phone internet browser and then all settings for internet were downloaded and installed and my 3g back This is strange couse it only happend when I clicked on browser. Is not working with FB, mail or other apps. I didnt have this kind of problems on DroidJelly, couse it was working from the beggining.

[Q] No SIM card detected Xperia E C1505 Nanhu

Hey guys, first of all a big hello to everyone, since this is my first post here on XDA!
I've been on this forum for a while, but it's only since now that I really can't figure things out anymore on my own, or trough other posts.
Now the situation:
I've got a sony Xperia E C1505 (codename Nanhu) (that's single SIM)
which is not running well even on stock software. On stock software (ROM version 11.3.A.0.47) the phone keeps freezing after a while, say 10 seconds after the reboot. When it freezes, it instantly reboots.
I got tired of this rebooting phone and first flashed Firefox O.S. to see what it looks like. It's quiete awesome but I didnt have any radio's... Anyways ATLEAST it didnt freeze on me.
So I flashed back again to the stock 11.3.A.0.47, to see myself run into the freezing problems AGAIN!
This time I decided that I'd flash CM10 to see what it does.
So far I came across 2 different versions:
- JB version (by jjim, am I correct?)
- FXP version (by FXP)
I've been running FXP228 now and it works flawlessly! Everything works, every radio is intact and even the camera app works.
But.. *drumroll..* here's the thing; My SIM card does not get detected. It doesen't even ask me for a PIN at startup!
I've downloaded this 3rd party app for my SIM info, it says the following:
SIM state: UNKNOWN
Phone Type: GSM
Network type: UNKNOWN
The IMEI is correct though
The baseband is correct aswell, atleast I believe so.
Btw, I live in the Netherlands and my SIM card is from Vodafone. I've already tested this card in another phone, it works as it should.
What can I do to make the SIM-Card be detected? I've scoured the forums looking for solutions.. Sadly enough, I only came across this which was my closest approach to my problem:
http://forum.xda-developers.com/showthread.php?t=2277279
I also noticed this:
http://forum.xda-developers.com/showthread.php?t=2209767
Anyway's.. I'm sort of stuck right now. The next step for me is to try n flash FXP 220..
If anyone's got a direct solution or workaround for me on this stage, I'd be happy.
Also, some explainment around the whole JB rom's would be nice. I understand that I first have to flash a modified stock ROM from JB to install CM10 ? Where can I get this .TFT file? I've already searched in http://forum.xda-developers.com/showthread.php?t=2326830 and http://forum.xda-developers.com/showthread.php?t=2330638 but I don't get much wiser out of it.
Looking forward to your responses!
- Ruud
Edit: SOLVED!!
http://forum.xda-developers.com/showthread.php?t=2276943
I used the xperia_e_single_jb_cwm.elf first, then i flashed nanhu-CM10DS-0.8.1.33-ota.zip
After 2 reboots it finally got into the home screen, asked me for the PIN straight away and works like a charm.
Many thanks to jjim
Hope this helps for a future user.
Things i have tried:
- Flash FXP firmware versions; (failed)
- 220 (failed)
- 224 (no gsm)
- 228 (no gsm)
- Restore stock over and over (failed)
- Modify stock (failed)
- Modified the FXP firmware with modem.zip files from the stock and re-flashed (failed)
- Flashed JB firmware. SUCCES!!!!
Greetings Ruud from the Netherlands
Why don't you just relock bootloader and apply for warranty
I'm sure it's been just a couple of months since Xperia E is released
Is there anything that stops you from applying warranty?:what::what:
Sent from my C1604 using xda app-developers app
I couldnt apply this phone for warranty because the previous user / owner already messed around with this phone.
Same to me. I've tried FXP238 and still no GSM network detected
Hey man, thanks a lot with your post, Im having exactly the same problem.
I have tried with FXP241 with no lock detecting the SIM card.
I downloaded the files you posted. Flashed the jjm34 boot+recovery and then installed the CM10DS file you mentioned. During the install I had the error "symlink: some symlinks failed"
Did you have the same problem?
Thanks!
Zdo
SIM no signal
have a xperia c1505 and after doing a root was no signal and can not make calls.
someone help me
hello
Do a factory reset and if that fails then flash the stock rom onto your phone
---------- Post added at 03:36 AM ---------- Previous post was at 02:42 AM ----------
You need to flash a file called cm_nanhu_DS-ota110 to fix any simcard problem ,I have it on my phone now and testing it atm Works okay
Ruud033 said:
Hey guys, first of all a big hello to everyone, since this is my first post here on XDA!
I've been on this forum for a while, but it's only since now that I really can't figure things out anymore on my own, or trough other posts.
Now the situation:
I've got a sony Xperia E C1505 (codename Nanhu) (that's single SIM)
which is not running well even on stock software. On stock software (ROM version 11.3.A.0.47) the phone keeps freezing after a while, say 10 seconds after the reboot. When it freezes, it instantly reboots.
I got tired of this rebooting phone and first flashed Firefox O.S. to see what it looks like. It's quiete awesome but I didnt have any radio's... Anyways ATLEAST it didnt freeze on me.
So I flashed back again to the stock 11.3.A.0.47, to see myself run into the freezing problems AGAIN!
This time I decided that I'd flash CM10 to see what it does.
So far I came across 2 different versions:
- JB version (by jjim, am I correct?)
- FXP version (by FXP)
I've been running FXP228 now and it works flawlessly! Everything works, every radio is intact and even the camera app works.
But.. *drumroll..* here's the thing; My SIM card does not get detected. It doesen't even ask me for a PIN at startup!
I've downloaded this 3rd party app for my SIM info, it says the following:
SIM state: UNKNOWN
Phone Type: GSM
Network type: UNKNOWN
The IMEI is correct though
The baseband is correct aswell, atleast I believe so.
Btw, I live in the Netherlands and my SIM card is from Vodafone. I've already tested this card in another phone, it works as it should.
What can I do to make the SIM-Card be detected? I've scoured the forums looking for solutions.. Sadly enough, I only came across this which was my closest approach to my problem:
http://forum.xda-developers.com/showthread.php?t=2277279
I also noticed this:
http://forum.xda-developers.com/showthread.php?t=2209767
Anyway's.. I'm sort of stuck right now. The next step for me is to try n flash FXP 220..
If anyone's got a direct solution or workaround for me on this stage, I'd be happy.
Also, some explainment around the whole JB rom's would be nice. I understand that I first have to flash a modified stock ROM from JB to install CM10 ? Where can I get this .TFT file? I've already searched in http://forum.xda-developers.com/showthread.php?t=2326830 and http://forum.xda-developers.com/showthread.php?t=2330638 but I don't get much wiser out of it.
Looking forward to your responses!
- Ruud
Edit: SOLVED!!
http://forum.xda-developers.com/showthread.php?t=2276943
I used the xperia_e_single_jb_cwm.elf first, then i flashed nanhu-CM10DS-0.8.1.33-ota.zip
After 2 reboots it finally got into the home screen, asked me for the PIN straight away and works like a charm.
Many thanks to jjim
Hope this helps for a future user.
Things i have tried:
- Flash FXP firmware versions; (failed)
- 220 (failed)
- 224 (no gsm)
- 228 (no gsm)
- Restore stock over and over (failed)
- Modify stock (failed)
- Modified the FXP firmware with modem.zip files from the stock and re-flashed (failed)
- Flashed JB firmware. SUCCES!!!!
Greetings Ruud from the Netherlands
Click to expand...
Click to collapse
Do you still have got the Modem.zip files for the stock rom ??
Hi Everyone,
I have purchased my Xperiz Z 'C6602' in the start of this year (2014). Yesterday, I faced a problem that my mobile was showing no Sim card detection. I have restarted my mobile many times, open the Sim slot and again placed it corrected but the problem persists. I have reset my mobile, check the aeroplane mode but all is well. I am wondering that how this happened because my mobile was working great. I used it at night very well and then after some hours at morning the mobile showed no network connection (detect no Sim) while the Sim was in the Sim Slot.
Please tell me the solution of this problem. Thanks
i got no signal at c1605 (dual)

[Q] Huawei U8860 doesn't do "DLOAD" flashes and fails to recognize SIM card

Hello all.
I would like to ask this in this thread but I still have no permissions to write there. :crying:
I succesfully rooted my U8860 and installed TWRP. Also every custom ROM installation from the thread above works. Unfortunaly since I installed a custom ROM the phone doesn't recognize the SIM card anymore. It just sais "no SIM installed". I tried to fix this with setting up own APN entries but without any results.
Then I wanted to go back to Stock ICS 4.0.3, because the SIM works there. But the update process stops after approx. 30%. Also the downgrade patch hangs after 60%.
So, there I am. Read a lot of hints and tryed everything except of this: formating the partition in pink mode. I am a little afraid of making it worse with loosing the IMEI and/or MAC Address.
Would be nice if anybody has the solution for getting back to ICS or the SIM working on other ROMs.
Thank you!
Greetz,
Vijabei

Samsung S8+ HK Snapdragon Radio problem

Hi guys, i have a question. Recently i got weird problem, my sim card stopped working overnight, Everything is normal, there is info about simcard, number, imei, everything, i tryed changig sim, but all sims that i tryed act the same. Things that i find that are wrong. In siminfo Radio is off, and airplane mode icon is always on, even if i turn it off in settings icon is still blue, i tryed flashing lates rom over odin, and it didnt work, i also tryed flashing custom rom (one that i found that is not on some wier chinese site that ask for my chinese number), twrp and still nothing, i lost a few days, and i need some help, i tryed everything i know. I cant go and enter *#*#4636#*#* to see siminfo and turn radio on(something that i saw on YouTube), that code dosent work on my device. I even tryed dissasembly the phone to see if everything is conected, and i dont find anything unusual, everything is in place. So please if anyone can help me that would be grat.
Im sorry im not native English speaker, and i apologize for my bad writing
Looks like a damaged efs partition
Well, it may be, but i have EFS backup when was okay(i learned thats important, hard way on s4 ), but everyting seems okay, i finally find right combination rom, and sim card seems to work fine, i cant call to conform, but its on 4g connection, and signal strenght is changigng just fine. And as soon as i flash stock rom radio goes off.
I actualy solved my problem, i flashed combination rom and tur radio on, right after that i flashed stock rom without CSC, and it worked, i got error on decryption, but i just wipe/factory restart from recovery, and it worked. So if anyone have some problem with ther S8+ g9550 PM me, ill try to help out.

Categories

Resources