Database Info

InsertCoin + Faux kernel

Hi everyone,
As i am un junior member i can not post on developpers wall so i had something to tell badnews and faux.
I am running insertcoin, i tested the 2.3.4 version and 2.3.5 version.
I also tested faux kernel on both version of insercoint and it appears that faux kernel works properly on insercoint 2.3.4 stable version.
But there is a problem with 2.3.5 Insercoint version, incompatibiliy ou what ? i don't know ....
I can not run cpuspy on 2.3.5 insertcoin version. and at least i found 2.3.4 version a bit faster than 2.3.5.
So i decided to go back to insertcoin 2.3.4 version with faux kernel on it untill the incompatibility is fixed.
See you.

Seeing as how we don't even have kernel source for 2.3.4 yet, it's no surprise that 2.3.3 kernel source doesn't work for a 2.3.5 based rom. And since a sensation 2.3.5 rom isn't even official yet, you should be expecting a lot in incompatibility.
Sent from my HTC Sensation 4G using XDA App

Hi geoffcorey, i saw that the lastest faux kernel are for 2.3.4 .... look at the details ! and it works great with 2.3.4 insertcoin version.

ok baad just post, the update for 2.3.5 and faux kernel 0.1 everything runs smooth, really fast...

don't understand why 2.3.5 version doesn't work as well as 2.3.4 for me. It's is not as fast as 2.3.4 for me.
Maybe i did something wrong then ?
Here is what i did.
I wipe all with a superwipe i found on leerdroid wall then i flashed with 2.3.5 insercoint and at least i instaled faux kernel. But it is not fluid, there is some little freeze in the carrousel ...
@velazkool : are you runing insertcoin rom ?
Someone can share the correct file if my leerdroid superwipe does not correspond ? thanks

Catpoule said:
Hi geoffcorey, i saw that the lastest faux kernel are for 2.3.4 .... look at the details ! and it works great with 2.3.4 insertcoin version.
Click to expand...
Click to collapse
They've been tweaked yo work with 2.3.4, but it's still built from 2.3.3 kernel source.
Sent from my HTC Sensation 4G using XDA App

[Q] ICS problems Regarding Firmware 3.32.401.xxx

So after flashing 3.32 firmware my phone seems to be running fine. No bootloop no hang, but after i install a custom rom, when I hit the power button to lock the device it freezes. It wont come back on and I have to do a battery pull to get it working again. I have tried this on Virtuous rom, Vorbeths AOSP ICS rom, Mikes stock rom from the Sensation, as well as Hypersensation sensless rom. Is it due to the fact that my phone doesnt go well with this firmware? What should I do?

There might be a problem with the kernel cpu settings, perhaps too under volted or too slow clock during screen off.
Try mike's ARHD with Stock Kernel after superwipe.
Sent from my HTC Sensation using XDA

Raven2k said:
There might be a problem with the kernel cpu settings, perhaps too under volted or too slow clock during screen off.
Try mike's ARHD with Stock Kernel after superwipe.
Sent from my HTC Sensation using XDA
Click to expand...
Click to collapse
Will try that. Ive been on stock gb and I don't like it

I want to run a AOSP rom to be truly stock can anyone recommend a kernel to fix this problem?

Bricked 3.0 and SebastianFM are both very good, check speed in SetCPU or Android Overclock or similar.
Best AOSP ROM depends on what you like, but IMO it's gotta be OpenSensation CM9.

It's weird how I was running the March release of open sensation and then when I upgraded to the aprik release it stopped working for me
Sent from my HTC Sensation 4G using XDA

InsertCoin Sense 4 + SebastianFM kernel

Hi everybody,
I haven't permision to write on Development forum, so i write in Q/A.
I'm InsertCoin 2.x + SebastianFM kernel tandem user. I checked many versions of ROMa and kernels and IMO it is the best compromise between batery life and performance. Unfortunately after last update ROM (to version 2.2) WIFI doesn't work with SebastianFM kernel. There are sugestions to downgrade firmware, but it is not necessary. WIFi working great on latest firmware, above kernel and IC ROM 2.0.
Best wishes!
Sent from my Sensation Z710e using xda premium

if you check the last few pages of sebastians kernel thread ..he added a new 1.4.1 with wifi fix modules ..you can flash that (it works with vipes rom btw ..so it should with IC 2.2 too )

[Q] sweep2wake for GB Stock or Reaper ROM

At the moment i'm using a rooted GB stock ROM rom, because Gameloft HD Games are not running with ICS or JB on my DS.
Now i miss the s2w function, and i don't want to kill my power-button.
For testing i flashed the Reaper v3 ROM.
I changed bcm4329.ko from Reaper kernel to s2w kernel (see attachment) and tried it in Reaper v3 ROM, but nothing, wifi can't start.
If i try the s2w or Reaper kernel on my GB stock ROM, it won't boot up any more, just goes to the recovery again.
Is there a chance to get the lovely s2w feature into my GB stock ROM?
BTW: i was not able to get Gameloft HD games running with ICS or JB, even higher clock frequency didn't solve the problem...

this http://forum.xda-developers.com/showthread.php?t=1759112 should work on Reaper.

Works great!
Sent from my HTC Desire S using xda app-developers app

I have this kernel on CM 7.2 and sometimes the phone just won't react and freeze. any updated kernel with s2w on GB?
Sent from my HTC Desire S using Tapatalk 2

[Q] Which ideal kernel for Vipers 1.6.3 ?

Hi All,
I need your suggestion which best Kernel for ROM Vipers 1.6.3 except the default Kernel (Bricked)?
Currently I use the default kernel, but the wifi looks unstable (diconnected somestimes).
What I need are:
Stable and good performance kernel for daily purpose (no game used)
Better battery life
Previously I tried Sultan r17.5 but my HH has immediate reboot while got incoming call
HH: HTC Sensation XE
ROM: Vipers 1.6.3
HBOOT: 1.29.0000
Radio: 11.24A.3504.31_M
Locked Bootloader
S-OFF

You might want to change your setup. I've seen better performance compared to bricked with worthy battery trade-off.
Sent from my HTC Sensation XE with Beats Audio using xda app-developers app

try sebastianfm's kernel or pyd-x kernel

rzr86 said:
try sebastianfm's kernel or pyd-x kernel
Click to expand...
Click to collapse
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.

imthatkiid said:
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.
Click to expand...
Click to collapse
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebastianfm or pyd-x kernel by axetilen or other kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything

Sultan Kernel
Sent from my HTC Sensation Z710e using xda app-developers app

rzr86 said:
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebasstian fm or pyd-x kernel by axetilen or others kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything
Click to expand...
Click to collapse
ahh okay, I see. Sorry I misread the original post, but thank you for the info.

Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!

u have the one which come with the rom u can find it in a folder in your sd called venom (after u flashed the rom of course)
or u can try Sultan kernel ... i am usingvit now it is pritty amazing
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA

My phone is getting very buggy with Vipers 1.6.3 and I don't know why. I tried wiping caches but after 1 day it returns in a buggy state. Very slow to open apps and to switch from one to another. Maybe is a kernel problem? I'm using default (Bricked)

padre629 said:
Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!
Click to expand...
Click to collapse
I have tried flash Sultan r17.5 but my phone got reboot while got incoming call.
Also tried to flash SebastianFM 1.5.2 but this kernel has no S2W

Try faux kernel. Its my favorite sense kernel.
Sent from my HTC Sensation using xda premium

I got reboots during phone call on sultan r17.5 (happens rarely but was unable to capture the last_kmsg) and on faux kernel (more frequent here)
I found sebs kernel is the most stablest of all but I'm a die hard fan of s2w (can't live without it)
And finally there is a kernel with sebs sources and s2w along with minimalistic changes.. It's the Grogg kernel 3.0
He recently opened a thread for it.. Do check it
Sent from my Nexus 7 using xda premium

I use faux and never had any problems. It's gives the best performance. Sultan kernel is good though it gives some glitches. Using faux 12u
Sent from my HTC Sensation Z710e using xda app-developers app

I have noticed that with ViperS 1.6.3 you can get reboots on incoming calls when you use "auto brightness" or the "AOSP lock screen".
So try disabling them, wipe cache/dalkiv and see if the problem goes away (it did in my case).