Database Info

InsertCoin + Faux kernel

Hi everyone,
As i am un junior member i can not post on developpers wall so i had something to tell badnews and faux.
I am running insertcoin, i tested the 2.3.4 version and 2.3.5 version.
I also tested faux kernel on both version of insercoint and it appears that faux kernel works properly on insercoint 2.3.4 stable version.
But there is a problem with 2.3.5 Insercoint version, incompatibiliy ou what ? i don't know ....
I can not run cpuspy on 2.3.5 insertcoin version. and at least i found 2.3.4 version a bit faster than 2.3.5.
So i decided to go back to insertcoin 2.3.4 version with faux kernel on it untill the incompatibility is fixed.
See you.

Seeing as how we don't even have kernel source for 2.3.4 yet, it's no surprise that 2.3.3 kernel source doesn't work for a 2.3.5 based rom. And since a sensation 2.3.5 rom isn't even official yet, you should be expecting a lot in incompatibility.
Sent from my HTC Sensation 4G using XDA App

Hi geoffcorey, i saw that the lastest faux kernel are for 2.3.4 .... look at the details ! and it works great with 2.3.4 insertcoin version.

ok baad just post, the update for 2.3.5 and faux kernel 0.1 everything runs smooth, really fast...

don't understand why 2.3.5 version doesn't work as well as 2.3.4 for me. It's is not as fast as 2.3.4 for me.
Maybe i did something wrong then ?
Here is what i did.
I wipe all with a superwipe i found on leerdroid wall then i flashed with 2.3.5 insercoint and at least i instaled faux kernel. But it is not fluid, there is some little freeze in the carrousel ...
@velazkool : are you runing insertcoin rom ?
Someone can share the correct file if my leerdroid superwipe does not correspond ? thanks

Catpoule said:
Hi geoffcorey, i saw that the lastest faux kernel are for 2.3.4 .... look at the details ! and it works great with 2.3.4 insertcoin version.
Click to expand...
Click to collapse
They've been tweaked yo work with 2.3.4, but it's still built from 2.3.3 kernel source.
Sent from my HTC Sensation 4G using XDA App

Kernels on 6.3.0 ARHD - 3.30 base

Hi people!
Can you tell me currently which kernels are compatible with the above mentioned ROM?
Or at this time the stock one is working properly (at least i read it that way somewhere in the threads).
ICS 4.03 / Sense 3.6
Thank you.

I used stock htc kernel and now im on SebastianFM 1.5 Ghz kernel,both are working prefectly,and normal battery life too.

ChobbyNS said:
I used stock htc kernel and now im on SebastianFM 1.5 Ghz kernel,both are working prefectly,and normal battery life too.
Click to expand...
Click to collapse
Thanks for the response, BTW, are you using this one:
Android 4.0.3 Sense 3.6 (3.25.401.101) based ROMs
1.512 GHz OC/UV kernel 3.0.16-g5e58c5e v1.01 for HTC Sensation ?
EDIT - Works!!!

[Q] Kernel Problem - WiFi Error

Hi,
I have a problem:
I'm using a custom kernel, Faux123 version 006, works fine, even with oc, everything works perfect. But after any Update, for example to version 007_r2 or 029, i cant turn on WiFi, there stands only "Error". Is there any possibility to use the newer Version of the Kernel, with WiFi working?
Tried:
Flashing from ARHD 6.6.4 to 6.6.7
2x Super Wipe
Both Kernels.

You need to flash another kernel per my experience of flashing kernels you should check and see that dev has another kernel thats close to that one or flash a different kernel by another dev
sent from xda premium sensation4g s off Insertcoin Ics Evolution v2.0 Sense 4.0 kernel version Bricked-3.0-v1.1

What's your setup?

Hello people of Sensations! I'm soon to be making my way to this phone in a couple of days as I am coming from LG G2x. (crappy phone ever) I've rooted and installed roms on this phone for my family, but that was during the GB days Now its ICS, and well so much has changed.
My question to the people of the Sensation Community is to know, well, whats your setup? Let me know by using the descriptions below:
Recovery:
ROM:
Kernel:
Radio:
Click to expand...
Click to collapse
Help me get started
**If there is already a post like this or I posted in the wrong section please kindly direct me or move to the right section. Sorry again if I messed up **

I am using
Recovery: 4ext recovery
ROM: ViperS 1.1.0
Kernel: SebastianFM kernel
Radio: I dont remember exactly, but this is from latest 3.33 firmware
I use UV -100mV modified by myself, min 192MHz max 1.24MHz, screen off freq max 384MHz, very stable, usually get up to 18 hours with moderate use with screen on around 3hours 30mins.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

read my signature

Recovery: 4ext
ROM: Stock rooted HTC ICS ROM from the TMOUS 3.32.531.14 RUU. De-bloated and de-sensed with ROM Cleaner and Titanium Backup.
Kernel: Stock
Radio: 11.69A.3504.00U_11.23.3504.07_M2
I'm very happy with my current setup. Very stable, easy on battery, and is fast as I need it to be. I do miss the theming of beloved Elegancia, but I recently picked up ROM cooking as a learning hobby again, so this is where I am right now. I never would have run stock anything back on Gingerbread, but TMOUS finally did us right with our much delayed ICS release.

Whoaah! These are nice setups. I'm checking all these ROMs out too. I must say this will be a hard decision.

My signature too says

Fw: 3.33
Recovery: 4ext Touch
Rom: bruce's CM10 Kang 8/07
Kernel: Tamcore 3.0.39

Hi there! I'm using 4ext recovery as it has proven to be easy to use with many wonderful features! My Rom is lightning as it is very fast and stable. My kernel is bricked as I like it for battery life. My firmware is 3.33 the newest ics firmware. My radio is 11.76a 3504.00p_. Hope this helps you out and welcome to xda! Best wishes to you and your new device!
Sent from my Sensation Z710e using xda premium

[Q] Which ideal kernel for Vipers 1.6.3 ?

Hi All,
I need your suggestion which best Kernel for ROM Vipers 1.6.3 except the default Kernel (Bricked)?
Currently I use the default kernel, but the wifi looks unstable (diconnected somestimes).
What I need are:
Stable and good performance kernel for daily purpose (no game used)
Better battery life
Previously I tried Sultan r17.5 but my HH has immediate reboot while got incoming call
HH: HTC Sensation XE
ROM: Vipers 1.6.3
HBOOT: 1.29.0000
Radio: 11.24A.3504.31_M
Locked Bootloader
S-OFF

You might want to change your setup. I've seen better performance compared to bricked with worthy battery trade-off.
Sent from my HTC Sensation XE with Beats Audio using xda app-developers app

try sebastianfm's kernel or pyd-x kernel

rzr86 said:
try sebastianfm's kernel or pyd-x kernel
Click to expand...
Click to collapse
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.

imthatkiid said:
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.
Click to expand...
Click to collapse
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebastianfm or pyd-x kernel by axetilen or other kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything

Sultan Kernel
Sent from my HTC Sensation Z710e using xda app-developers app

rzr86 said:
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebasstian fm or pyd-x kernel by axetilen or others kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything
Click to expand...
Click to collapse
ahh okay, I see. Sorry I misread the original post, but thank you for the info.

Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!

u have the one which come with the rom u can find it in a folder in your sd called venom (after u flashed the rom of course)
or u can try Sultan kernel ... i am usingvit now it is pritty amazing
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA

My phone is getting very buggy with Vipers 1.6.3 and I don't know why. I tried wiping caches but after 1 day it returns in a buggy state. Very slow to open apps and to switch from one to another. Maybe is a kernel problem? I'm using default (Bricked)

padre629 said:
Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!
Click to expand...
Click to collapse
I have tried flash Sultan r17.5 but my phone got reboot while got incoming call.
Also tried to flash SebastianFM 1.5.2 but this kernel has no S2W

Try faux kernel. Its my favorite sense kernel.
Sent from my HTC Sensation using xda premium

I got reboots during phone call on sultan r17.5 (happens rarely but was unable to capture the last_kmsg) and on faux kernel (more frequent here)
I found sebs kernel is the most stablest of all but I'm a die hard fan of s2w (can't live without it)
And finally there is a kernel with sebs sources and s2w along with minimalistic changes.. It's the Grogg kernel 3.0
He recently opened a thread for it.. Do check it
Sent from my Nexus 7 using xda premium

I use faux and never had any problems. It's gives the best performance. Sultan kernel is good though it gives some glitches. Using faux 12u
Sent from my HTC Sensation Z710e using xda app-developers app

I have noticed that with ViperS 1.6.3 you can get reboots on incoming calls when you use "auto brightness" or the "AOSP lock screen".
So try disabling them, wipe cache/dalkiv and see if the problem goes away (it did in my case).