At the moment i'm using a rooted GB stock ROM rom, because Gameloft HD Games are not running with ICS or JB on my DS.
Now i miss the s2w function, and i don't want to kill my power-button.
For testing i flashed the Reaper v3 ROM.
I changed bcm4329.ko from Reaper kernel to s2w kernel (see attachment) and tried it in Reaper v3 ROM, but nothing, wifi can't start.
If i try the s2w or Reaper kernel on my GB stock ROM, it won't boot up any more, just goes to the recovery again.
Is there a chance to get the lovely s2w feature into my GB stock ROM?
BTW: i was not able to get Gameloft HD games running with ICS or JB, even higher clock frequency didn't solve the problem...
this http://forum.xda-developers.com/showthread.php?t=1759112 should work on Reaper.
Works great!
Sent from my HTC Desire S using xda app-developers app
I have this kernel on CM 7.2 and sometimes the phone just won't react and freeze. any updated kernel with s2w on GB?
Sent from my HTC Desire S using Tapatalk 2
Related
is there any kernel that has the 3d fix that only runs at 1.2 ? i have issues runnign 1.5 so i tihnk stok is best, especially 4 battery
You can underclock most custom kernels to run at 1.2. If you are running a custom Rom that is overclocked, usually the Dev posts how to get it down to stock. ARHD 3.6.1 is a good example.
Sent from my HTC Sensation 4G using Tapatalk
So after flashing 3.32 firmware my phone seems to be running fine. No bootloop no hang, but after i install a custom rom, when I hit the power button to lock the device it freezes. It wont come back on and I have to do a battery pull to get it working again. I have tried this on Virtuous rom, Vorbeths AOSP ICS rom, Mikes stock rom from the Sensation, as well as Hypersensation sensless rom. Is it due to the fact that my phone doesnt go well with this firmware? What should I do?
There might be a problem with the kernel cpu settings, perhaps too under volted or too slow clock during screen off.
Try mike's ARHD with Stock Kernel after superwipe.
Sent from my HTC Sensation using XDA
Raven2k said:
There might be a problem with the kernel cpu settings, perhaps too under volted or too slow clock during screen off.
Try mike's ARHD with Stock Kernel after superwipe.
Sent from my HTC Sensation using XDA
Click to expand...
Click to collapse
Will try that. Ive been on stock gb and I don't like it
I want to run a AOSP rom to be truly stock can anyone recommend a kernel to fix this problem?
Bricked 3.0 and SebastianFM are both very good, check speed in SetCPU or Android Overclock or similar.
Best AOSP ROM depends on what you like, but IMO it's gotta be OpenSensation CM9.
It's weird how I was running the March release of open sensation and then when I upgraded to the aprik release it stopped working for me
Sent from my HTC Sensation 4G using XDA
Hi,
I have a problem:
I'm using a custom kernel, Faux123 version 006, works fine, even with oc, everything works perfect. But after any Update, for example to version 007_r2 or 029, i cant turn on WiFi, there stands only "Error". Is there any possibility to use the newer Version of the Kernel, with WiFi working?
Tried:
Flashing from ARHD 6.6.4 to 6.6.7
2x Super Wipe
Both Kernels.
You need to flash another kernel per my experience of flashing kernels you should check and see that dev has another kernel thats close to that one or flash a different kernel by another dev
sent from xda premium sensation4g s off Insertcoin Ics Evolution v2.0 Sense 4.0 kernel version Bricked-3.0-v1.1
Dear friends,
I've been using Fallout rom for a while now but I decided to try a Sense 3.5 rom since they run more stable and faster than most ICS roms.
First I tried Endymion and later Energy rom. However with both roms I get a lot of crashes and I can't figure out why. Sense 3.6 roms run fine.
The crashes with Sense 3.5 also happen whilst the nothing is installed. How can I find out what's crashing my phone?
AW: Lots of crashes when using a Sense 3.5 rom
If they keep crashing, why do you still think they're more stable?
I was on endy before this, planing on going back after doing a test with reaper. Never had any crashes/reboot. I could only think of bad download/install as the cause if no app was installed/restored.
You probably didn't flash the boot.img and are still using the stock kernel.
AW: Lots of crashes when using a Sense 3.5 rom
Aquous said:
You probably didn't flash the boot.img and are still using the stock kernel.
Click to expand...
Click to collapse
Coming from fallout it wouldn't even have booted on the previous kernel, so that can't be the issue.
Have you changed any oc/uv settings?
teadrinker said:
Coming from fallout it wouldn't even have booted on the previous kernel, so that can't be the issue.
Have you changed any oc/uv settings?
Click to expand...
Click to collapse
I flashed the right boot.img and did clean installs (wipe data/cache) and haven't touched oc/uv settings. It also seems to happen more often when I'm multitasking e.g. Listening to music and browsing.
Sent from my HTC Desire S using xda app-developers app
teadrinker said:
If they keep crashing, why do you still think they're more stable?
Click to expand...
Click to collapse
Good one. One would expect the gingerbread roms to be more stable but not on my phone. I like the gingerbread speed and they're more battery friendly than ICS roms in my experience.
Sent from my HTC Desire S using xda app-developers app
R: Lots of crashes when using a Sense 3.5 rom
As far as I know, now ICS ROMs and JB ROMs are far more stable that GB ones. I am using Flinny's CM10.1 build 12 ROM daily without any issue, and I saw that Desire XS is pretty fast, maybe as fast as GB ROMs. Except for personal taste I see no point to stick around with GB ROMs.
desire xs is a great ROM ,, GB does not stand a chance!
Hi All,
I need your suggestion which best Kernel for ROM Vipers 1.6.3 except the default Kernel (Bricked)?
Currently I use the default kernel, but the wifi looks unstable (diconnected somestimes).
What I need are:
Stable and good performance kernel for daily purpose (no game used)
Better battery life
Previously I tried Sultan r17.5 but my HH has immediate reboot while got incoming call
HH: HTC Sensation XE
ROM: Vipers 1.6.3
HBOOT: 1.29.0000
Radio: 11.24A.3504.31_M
Locked Bootloader
S-OFF
You might want to change your setup. I've seen better performance compared to bricked with worthy battery trade-off.
Sent from my HTC Sensation XE with Beats Audio using xda app-developers app
try sebastianfm's kernel or pyd-x kernel
rzr86 said:
try sebastianfm's kernel or pyd-x kernel
Click to expand...
Click to collapse
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.
imthatkiid said:
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.
Click to expand...
Click to collapse
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebastianfm or pyd-x kernel by axetilen or other kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything
Sultan Kernel
Sent from my HTC Sensation Z710e using xda app-developers app
rzr86 said:
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebasstian fm or pyd-x kernel by axetilen or others kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything
Click to expand...
Click to collapse
ahh okay, I see. Sorry I misread the original post, but thank you for the info.
Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!
u have the one which come with the rom u can find it in a folder in your sd called venom (after u flashed the rom of course)
or u can try Sultan kernel ... i am usingvit now it is pritty amazing
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA
My phone is getting very buggy with Vipers 1.6.3 and I don't know why. I tried wiping caches but after 1 day it returns in a buggy state. Very slow to open apps and to switch from one to another. Maybe is a kernel problem? I'm using default (Bricked)
padre629 said:
Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!
Click to expand...
Click to collapse
I have tried flash Sultan r17.5 but my phone got reboot while got incoming call.
Also tried to flash SebastianFM 1.5.2 but this kernel has no S2W
Try faux kernel. Its my favorite sense kernel.
Sent from my HTC Sensation using xda premium
I got reboots during phone call on sultan r17.5 (happens rarely but was unable to capture the last_kmsg) and on faux kernel (more frequent here)
I found sebs kernel is the most stablest of all but I'm a die hard fan of s2w (can't live without it)
And finally there is a kernel with sebs sources and s2w along with minimalistic changes.. It's the Grogg kernel 3.0
He recently opened a thread for it.. Do check it
Sent from my Nexus 7 using xda premium
I use faux and never had any problems. It's gives the best performance. Sultan kernel is good though it gives some glitches. Using faux 12u
Sent from my HTC Sensation Z710e using xda app-developers app
I have noticed that with ViperS 1.6.3 you can get reboots on incoming calls when you use "auto brightness" or the "AOSP lock screen".
So try disabling them, wipe cache/dalkiv and see if the problem goes away (it did in my case).