[Q] Infuse Samsung Logo Disappears but doesnt boot - General Questions and Answers

Hey,
I was running CM9 alpha on my infuse until I encountered an odd problem. Every time I try to reboot the phone, the Samsung logo will appear and then disappear as if it is about to boot. The only problem is right when I expect to see the boot animation, nothing happens and the screen just goes black. I have used Odin to re-flash stock and I get a pass but when the stock rom boots the same problem occurs. I can still access recovery but thats about it. What should I do?

Try wipe data/factory restore clear all cache and fix permissions the re flash
Sent from my SGH-I997 using XDA

Related

TF101 B80 stuck on ASUS boot screen

My tablet recently froze when i was not able to turn off my wifi in the settings of my Revolution 3.1 ROM. I have tried to boot up since this and now it is stuck on the ASUS boot screen with the circle.
I am able to boot to cwm 3.2.0.1 and wipe data/flash the rom again, but no matter what I do, it is stuck on the same screen.
I recently tried doing a cold boot and a factory reset/wipe data in the recovery menu, but when i choose to wipe data, after it loads the recovery kernal image, all i get is the android triangle.
What else can I try?
I have the same problem with my TF101. Are you able to find a solution to your problem.
shutchins said:
My tablet recently froze when i was not able to turn off my wifi in the settings of my Revolution 3.1 ROM. I have tried to boot up since this and now it is stuck on the ASUS boot screen with the circle.
I am able to boot to cwm 3.2.0.1 and wipe data/flash the rom again, but no matter what I do, it is stuck on the same screen.
I recently tried doing a cold boot and a factory reset/wipe data in the recovery menu, but when i choose to wipe data, after it loads the recovery kernal image, all i get is the android triangle.
What else can I try?
Click to expand...
Click to collapse
Maybe a problem in kernel or /system partition, try to flash the ROM again may fix the problem.
Same......
tingtan said:
Maybe a problem in kernel or /system partition, try to flash the ROM again may fix the problem.
Click to expand...
Click to collapse
I have the same problem.....
I rooted, installed Rom Manager to get CWM Recovery installed and then flashed the new CyanogenMod 10 - B1 ♦ K.A.T. As soon as I restarted, after it appeared that the flash went fine, it hung at the boot screen - not frozen just wont go any further.
I tried rebooting by holding the power button, I tried re-flashing both the CY 10 and the original Rom and tried "restoring" my backed up rom.
I have tried recovering through Easy Flasher but I don't think my PC is seeing the transformer properly.
I have ADB drivers installed but because the TF dose not boot properly it dose not seem to get there.
I have let the battery drain as some report a resolve when they get it to power down all the way but as soon as I plug it in and power it up it goes back to the boot screen and stays there.
Please help as I cant afford to lose this pad (yes I knew the risks).
Chaos-sa said:
I have the same problem.....
I rooted, installed Rom Manager to get CWM Recovery installed and then flashed the new CyanogenMod 10 - B1 ♦ K.A.T. As soon as I restarted, after it appeared that the flash went fine, it hung at the boot screen - not frozen just wont go any further.
I tried rebooting by holding the power button, I tried re-flashing both the CY 10 and the original Rom and tried "restoring" my backed up rom.
I have tried recovering through Easy Flasher but I don't think my PC is seeing the transformer properly.
I have ADB drivers installed but because the TF dose not boot properly it dose not seem to get there.
I have let the battery drain as some report a resolve when they get it to power down all the way but as soon as I plug it in and power it up it goes back to the boot screen and stays there.
Please help as I cant afford to lose this pad (yes I knew the risks).
Click to expand...
Click to collapse
Same issue, I can't get my computer to recognize the tablet to push any files to it, and I can't mount it from TWRP. What can I do?
Have you guys tried wiping out before flashing? Wipe out the cache,system, and all other partitions.

Remove gt-I9100 after installing CWM on SPH-D710

I recently went through the efforts to install the rom and kernel for the SGS2E4gT. http://forum.xda-developers.com/showthread.php?t=1514665 this one here, now, I can get it to install, boot, run, everything with no problems, but what I want changed is that after installing the CWM EL26 the phone boots with a gt-I9100 under the Samsung Galaxy S logo. I want to remove this and set it back to the regular boot screen without CWM as the default boot recovery. I've tried useing the auto rooting tool to install a different boot image and fix the logo, but every time afterward the phone won't boot to the system and I have to start from square one.
Does anyone know how to do this where that rom will load with the proper boot image
Anyone, please, I've been at this for hours
I've gone through every option I can think of now, if theirs anyway to just change the boot image that shows when you first load the phone I'd be happy with that.

REMICS 1.4 to other rom

I had a problem as I was on REMICS 1.4 and then decided to try "aokp_galaxysl_milestone-6" so I put it on my Sdcard and make a reboot to recovery then wiped factory reset and then installed the new flash and at rebooting to install the second part "gapps-ics-20120429-signed", I got stuck there and had soft brick.
I want to know why this happened coz am planning also to try "InDROID EVOLUTION RC1" ROM, so what is am doing wrong when changing from one ROM to another,
and why I got this soft brick ?
Plus I can't find a file for CWM, to rebot at recovery and then chose it like I do in my s6102? OR I do this by odin or what ?
I used odin to flash I9003DDLF2_I9003ODDLF2_INU but didn't loops the loading at the logo samsung, also tried to get to a backup of remics and stuck at the start and never loads ....
Thanks a lot in advance
RemICS 1.4 is fine but...
same problem here, more or less. I can't install any other package on the gt-i9003 including stock like ddkp3. tried restocking from xxkpe but the boot logo looping is all i get. we need an intervention.
Use vol up+home+power button to boot to recovery. Then wipe data. Yes there is stock recovery.
Sent from my GT-I9003 using xda app-developers app

Stuck on glowing "Samsung" logo after Odin flash?

I was on CM10 initially, and flashed Galaxy Rom HD over it, hoping it would flash over it, but it froze during the flash, so I rebooted into download mode, and flashed the stock ICS thru Odin and Odin says it was success. now im currently stuck in the glowing "Samsung" logo... SOMEONE PLEASE HELP :C
Flash clockwork recovery and do a factory reset, then reflash
Sent from my myTouch 4g via Tapatalk
Odin is doing factory reset + complete format of internal card before flashing stock roms. I had that to, i was waiting 15 mins at boot logo, i just restarted into 3e recovery did some wipes (not sure which one) and i just rebooted, was working after that
Sent from my GT-P6200 using xda app-developers app

cwm recovery problem karbonn a 11

hi all,
i have rooted karbonn a11 and want to flash lewa rom which i have already downloaded now prob. is that it does not start in recovery. when i start the phone in recovery then it hangs and shows recovery mode. no further screen changes rather than continuous showing recovery mode. it only get off if i remove battery. so plz help me that how to start in recovery and flash lewa rom. i am new to flashing rom so plz explain everything clearly..
Sent from my A11 using xda app-developers app
What is your actual problem ur recovery mode not show or other
Sent from my GT-I9105 using XDA Premium 4 mobile app
twrp
You could look up twrp and see if its available for your phone. its much better than cwm . flashing that may solve your problem.
similar problem
I just flashed TPR with KT747 kernel (on Sprint GS3), ran into the issue a couple others had where it shuts off after boot animation and won't finish booting. I saw that the solution is wiping, clearing cache, reinstalling, clear cache again, boot. However, when I try to boot in recovery, it takes me to odin mode instead of cwm and the screen stays on "Downloading... Do not turn off target!!" So my 2 boot options at this point either freeze my phone or turn off before completing boot.
So I am unsure how to continue. Help would be greatly appreciated =)
EDIT: Ok, I think I solved my own problem. Sorry for the unnecessary post!

Categories

Resources