Database Info

Galaxy ACE Wont boot :[

I have Galaxy ace
I wanted to switch to 2.3.3, so I downloaded the software ROM manager did flash. He asked me to pick and chose just Pelephone Pelephone, he wrote that he succeeded. After Flash went to Backup (backup), I clicked, boom turned off. I gave him a minute or two That's it.
BY THE WAY, you know what this Emergency MOD? Computer can recognize it is about this situation.

help?plzzzzzzzzzzzzzz

it seems that you tried to show some intelligence in flashing rom
who said you to flash with rom manager when the site clearly stated that you have to use odin to flash rom.
the only thing now you can try is putting you phone in download mode and flash with odin and follow the flash guide directions below-
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take 5-10 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!

Hey dude
tnx for hlp,but he dont get into download mode and recovery mod.
he Not Responding for nothing.
when i try to turn it on,recovery mod.download mod, he wont boot.

sorry to say but i think you bricked or semi-bricked your ace...

i got more then less same problem..
just have my galaxy ace GT-S5830
needed restart.. try turn on again... only thing he did was buzzing and samsung came in the screen lightning on and off... but wasnt able to continue to normal android menu...
i try a restart now
in small yellow i see downloading.. hope it works..
else i bring it back to the shop.. phone is just 1!! day old

guddu2011 said:
sorry to say but i think you bricked or semi-bricked your ace...
Click to expand...
Click to collapse
How to solve bricked SGA?

try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart

alstonleo said:
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
Click to expand...
Click to collapse
Facing the same problem, the critical point the mobile does not respond to power up (either turning on, recovery mode or even download mode), any help please??? I got this mobile less than month now

Samsung Galaxy Ace Wont Boot!!
when i press the power button of my galaxy ace, baring in mind the battery has charge, the empty battery indicator comes up and then the phones turns off straight away. i have tried flashing different versions of android hoping it was a buggy firmware but no luck. this also happens when plugging the phone into an ac power supply. any help?????????

If you cannot access the download mode or the recovery mode then your phone is bricked. All what you can do is go to the service center and pull up a nice story about how it happened while you were sleeping. If you are lucky enough, you will get a replacement.
Btw WRONG THREAD. THERE IS A SEPARATE ONE FOR THE ACE.
TeamCooper Developer
TheMyth Developer
www.teamcooper.net

Galaxy ACE only displaying the word "Android"
Same problem here, only I use Ubuntu 12 and was wondering if there is a way of re-flashing using download mode and Ubunu?

Can't finish installing Serendipity VII

I followed the following instructions on the serendipity website but after going through steps 1-12, I ended up with an unrooted Samsung GT-I9000 2.3.3 which cannot be rooted with SuperOneClick 1.9.5 (using both GingerBreak and psneuter). Since the last portion of the installation requires CWM Recovery, I think this might not work.
I am pretty sure that somebody is going to scold me for posting this thread with the answer right in front of me; I swear that I tried looking for somebody who had this same problem, but couldn't find anything remotely close.
On a side note, this phone is a Samsung Captivate. When I did the first instance of Odin, I pressed volume up and down at the same time to get into download mode. When I did it the second time (after it had been upgraded to the GT-I9000), I had to press power and down volume to get to Download, so I'm pretty sure the version of phone has changed.
I don't know what I did wrong in the instructions; I would have posted this to this thread, but xda-developers won't let me post to the developer section. I couldn't find anyone else with the same problem. Please help. Thank you. (This is non-vital, the phone still works and I'm able to send/receive calls, but for some reason the home button doesn't work. I can live without that for a few days)
Installation:
1. Download this package.
2. Open Odin3 1.7.
3. Select the PDA, PHONE, CSC, and PIT files in their correct spots.
4. Connect phone in download mode. Use a USB port that's on your motherboard (the ones on the back of the computer). Use the Samsung USB cable.
5. Ensure that Auto-reboot and Re-Partition are both checked. These have a tendency to change after plugging the phone in, so double check them.
6. This is where the bootloader will be flashed, along with stock Gingerbread. Hit Start.
7. Allow the phone to boot.
8. Close Odin3, and open a fresh one. Select Reorient_Kernel_1.1 in the PDA box.
9. Reboot into download mode (adb reboot download, or hold Vol Down + Power).
10. Plug the phone into the computer.
11. MAKE SURE RE-PARTITION IS NOT CHECKED. If it is, you'll soft-brick and have to start over.
12. Flash the kernel (hit start). Allow the phone to reboot.
~IF YOU ARE CURRENTLY ON A SAMSUNG-BASED GINGERBREAD ROM WITH BOOTLOADERS (NOT CM or MIUI), START HERE~
13. Place the ROM .zip (You know, the one you downloaded from the giant link up there) onto the SD Card.
14. Reboot into Recovery (adb reboot recovery, or Vol Up + Power).
15. Flash ROM with CWM.
16. Enjoy!
Note, you will get some popup at start about not having network time. Just hit cancel and pretend it never popped up.

if u did step 11 and 12 you should have the reoriented kernel installed and hold vol up+power to get into cwm recovery mode and choose install from zip option, choose the zip which should be on ur sd card before. then u can flash S7 .zip and wham ban thank you ma'am u got it done

There is a Serendipity sticky in the Q&A subforum where questions like this should be posted. Please use the sticky before starting a new thread in the wrong forum.

[Q] I have very big problem i need help

Hello,
I have tried many many system in my tablet and there is nothing working on with me i need someone who can help me to get the tablet back to default system i have tried cyanogenmod all version my tablet is p6200 and i tried everything now its not working anymore , i need some steps to get it back guys

if you want to go stock rom use Odin and download stock rom for you're country from http://www.sammobile.com/firmware/?page=3&model=GT-P6200&pcode=0&os=1&type=3#firmware

when i connect the usb in laptop its shown
USB Device Not Recolonize what shall i do to get the tablet to default and i have tried many things like i root the tablet and i try manyyyyyy roms so please can you tell me what to do exactly i download the kies program in my laptop what i have to do else ?

Not kies but use Odin and put you're tablet in download mode (power + vol down)

explain please give me the link of odin because i dont know it and when i press in power and volume up its shown
Warning
A custom OS can cause critical problems in tablet and installed applications. if you want to download a custom OS, press the voume up key.
otherwise, press the volume down key to cancel
Volume up : Continue
Volume down: Cancel ( restart tablet )

i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?

NightZeus said:
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
Click to expand...
Click to collapse
What To Do:
- Make sure Kies is Closed
- Disconnect the Tab from your PC
- Restart your Tab in Download Mode (Power Off Tab then Hold Volume - & Power Button)
- Open Odin , do not change any checkbox items
- Click the PDA button and find the Stock ROM .md5 file and select it (DO NOT HIT START YET)
- Plug in your Tab to the PC at which point the first "ID:COM" box should turn yellow and the Message windows should read "Added"
- Now, Hit Start
- When Completed the "ID:COM" Box should turn Green and right above it it should say "Pass"
The tablet should reboot,
- Disconnect the Tab from your PC

How can i go to download mode if i press on power and volume - its turn to recovery mode how can i go to download mode now

I find how to go to download mode
i open the odin and put the file on PDA and i saw its became yellow and added fine and then i hit start
its not sucess i got faild
what can i do now

try to find a tar.md5 package with a .pit file specifically for your device..,
alternately try flashing a stock Honeycomb ROM.. and booting into recovery and factory reset.
Most importantly research and read, If you can get into Download mode you're 90%+ will be OK

Get ClockworkMod recovery from here
http://forum.xda-developers.com/showthread.php?t=2112667
Use odin to flash it
boot to recovery
wipe system and cache
use odin to install your stock rom again
boot

Fix For Freezing After 4.4.2 Update

I've seen quite a few posts of people with freezing after installing 4.4.2 no matter what they do and both myself and a friend have been at the mercy of this - myself with a custom rom and my friend with the Samsung OTA update.
From what I remember from back in the HD2 days with similar symptoms it's related to the baseband/modem - a check of both her phone and mine showed the baseband was incorrect for the ROM and updating it resolved the issue.
The following guide will flash the latest stock, unrooted, NB4 ROM with a matching modem/baseband.
Whilst it shouldn't affect Knox as everything is official signed files (and Knox is fine on my friends phone after I did this procedure), I take no responsibility for your own Knox status.
***THIS *SHOULDN'T* AFFECT KNOX IN ANY WAY AS YOU ARE ONLY FLASHING SIGNED STOCK SAMSUNG STUFF***
First off, backup anything on the phone you want to keep and download the following then extract them all to the same folder:
Samsung USB Drivers - http://developer.samsung.com/android...er-for-Windows
Odin - http://uploaded.net/file/hwtdrpll
Latest 4.4.2 Firmware - https://mega.co.nz/#!QVwlVDgJ!QyAxmD...TVvdM07LOs0V10
PIT File for 4.4.2 Firmware - http://forum.xda-developers.com/show...9&postcount=77
NB1 Modem Firmware - https://mega.co.nz/#!JJBglRDY!ZT5SkT...4obRSKpB4B8NB1
1) Install Samsung Drivers
2) On your phone go Settings --> General --> About and keep tapping "Build Number" until it says developer mode enabled.
3) Go back to Settings --> General and tap Developer Options.
4) Tick enable "USB Debugging" then plug the phone into your computer.
5) Push and hold Volume Down + Home Button + Power Button all at the same time - hold until it goes black and vibrates indicating it
rebooted. Once it vibrates, release the power button but keep the other two held down - when you get the prompt on the screen press Volume Up - this will put the phone into Odin mode.
6) On the computer, right click Odin and click "Run as Administrator"
7) Click the button labelled PIT and select the file "My_N9005.pit"
8) Click the button labelled AP and select the file labelled "N9005XXUENB4_N9005DBTENB1_N9005XXUENB1_HOME.tar.m d5"
9) Make sure Re-Partition is ticked and click start.
10) When it finishes your phone will reboot - once you see the Samsung Logo, put the phone back into Odin Mode by pushing and holding Volume Down + Home Button + Power Button again, same as last time. Don't close Odin just yet.
12) In Odin, click Reset and then click the button labelled AP and select the file called "N9005XXUENB3_Modem-XXUENB1-LTE.tar.md5"
13) Click Start
14) When it finishes it should reboot. Dont panic about your phone appearing german, you can change the language right at the start on the first screen
***Optional Steps***
If your phone doesn't boot still, do the following:
1) Hold down Volume Up + Home Button + Power until it reboots, then release the power button keeping the other two held down (Basically the same as Odin mode except Volume Up instead of Volume Down).
2) You should now be in recovery - ignore any errors. Select Wipe Data/Factory Reset then Wipe Cache Partition - you don't need to reboot in between.
3) Once that's done, reboot and you should be up and running fine. If it still hasn't booted after 10 mins at this point, it's the phone itself most likely.

hi what is the password for download.. mega is asking for decryption key...

[Q] S2 GT-i9105P not working since flashed CM11

can anyone help me whats the reason when u get white screen all over the device anywhere recovery,Download mode ...... CM11 made my phone equal to dead

Sarfu4ndroid said:
can anyone help me whats the reason when u get white screen all over the device anywhere recovery,Download mode ...... CM11 made my phone equal to dead
Click to expand...
Click to collapse
when did you noticed the white screen?

gabi_tz said:
when did you noticed the white screen?
Click to expand...
Click to collapse
as soon as i flashed cm11 n restarted my phone its white from then

But is booting? The menu and back buttons are having light? Vibration work?
Sent from my GT-I9105P using Tapatalk

gabi_tz said:
But is booting? The menu and back buttons are having light? Vibration work?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
ya its booting main menu working no vibrations

Well, i think there is a problem with the display if is booting and in recovery is the same. You can try to flash with odin stock firmware but you have to do it "blind". Search for odin tutorial anf follow step by step even if you don't see enithing on screen.
Sent from my GT-I9105P using Tapatalk

If you want to go blind into download mode maybe the following will help:
1: hold power volume down and home button for around 5/6 seconds then let them go
2: press the volume up key and see if odin recognize the device.

safariking said:
If you want to go blind into download mode maybe the following will help:
1: hold power volume down and home button for around 5/6 seconds then let them go
2: press the volume up key and see if odin recognize the device.
Click to expand...
Click to collapse
i can do that odin recognizes my device
and i flashed stock ROM also
but still its same just one time i got the display in download mode after flash phone restarted n display same as white

I don't know why it was ok in download mode and after reboot it is not.
Sent from my GT-I9105P using Tapatalk

gabi_tz said:
I don't know why it was ok in download mode and after reboot it is not.
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
that i also don't know can u tell me how to flash android mobile

With odin. Download firmware from sammobile.com
Sent from my GT-I9105P using Tapatalk

Sarfu4ndroid said:
that i also don't know can u tell me how to flash android mobile
Click to expand...
Click to collapse
Before we proceed, make sure:
1-You have installed your Samsung Galaxy SII Plus GT-I9105/P USB drivers on your PC.
2-You need to enable USB debugging mode (Settings>Developer options) which is deactivated by default.
3-Your SII Plus GT-I9105/P should have 70-80% charge remaining.
4-Your SII Plus GT-I9105/P should be factory unlocked.
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt.
6-Make sure that kies program is not running & disable antivirus.
How to do it:
Step 1) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up. (For some phones, when you see the construction Android robot and a triangle, press Power again to confirm to enter into Download Mode).
Step 2) Now open ODIN on your PC and connect your Galaxy SII Plus GT-I9105/P to your computer.
Step 3) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue and will show the COM port number.
Step 4) unzip the downlowded file, u will get a Home.tar file.
Step 5) click on pda in odin (if odin 3.09 choose AP) and choose the file "xxxx.tar.md5"
Step 6) check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Pass". your phone will restart (first boot will take a longer time so don't panic)
It is recommended to make hard reset after flashing to have a fresh official firmware.

DenisRonaldo798 said:
Before we proceed, make sure:
1-You have installed your Samsung Galaxy SII Plus GT-I9105/P USB drivers on your PC.
2-You need to enable USB debugging mode (Settings>Developer options) which is deactivated by default.
3-Your SII Plus GT-I9105/P should have 70-80% charge remaining.
4-Your SII Plus GT-I9105/P should be factory unlocked.
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt.
6-Make sure that kies program is not running & disable antivirus.
How to do it:
Step 1) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up. (For some phones, when you see the construction Android robot and a triangle, press Power again to confirm to enter into Download Mode).
Step 2) Now open ODIN on your PC and connect your Galaxy SII Plus GT-I9105/P to your computer.
Step 3) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue and will show the COM port number.
Step 4) unzip the downlowded file, u will get a Home.tar file.
Step 5) click on pda in odin (if odin 3.09 choose AP) and choose the file "xxxx.tar.md5"
Step 6) check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Pass". your phone will restart (first boot will take a longer time so don't panic)
It is recommended to make hard reset after flashing to have a fresh official firmware.
Click to expand...
Click to collapse
ya i know this thankx but its not working for after flashing stock its the same as before

??
Sarfu4ndroid said:
can anyone help me whats the reason when u get white screen all over the device anywhere recovery,Download mode ...... CM11 made my phone equal to dead
Click to expand...
Click to collapse
What you've done before, did you flash any customs/zip files??, have you tried flash it to the stock using Odin??