can anyone help me whats the reason when u get white screen all over the device anywhere recovery,Download mode ...... CM11 made my phone equal to dead
Sarfu4ndroid said:
can anyone help me whats the reason when u get white screen all over the device anywhere recovery,Download mode ...... CM11 made my phone equal to dead
Click to expand...
Click to collapse
when did you noticed the white screen?
gabi_tz said:
when did you noticed the white screen?
Click to expand...
Click to collapse
as soon as i flashed cm11 n restarted my phone its white from then
But is booting? The menu and back buttons are having light? Vibration work?
Sent from my GT-I9105P using Tapatalk
gabi_tz said:
But is booting? The menu and back buttons are having light? Vibration work?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
ya its booting main menu working no vibrations
Well, i think there is a problem with the display if is booting and in recovery is the same. You can try to flash with odin stock firmware but you have to do it "blind". Search for odin tutorial anf follow step by step even if you don't see enithing on screen.
Sent from my GT-I9105P using Tapatalk
If you want to go blind into download mode maybe the following will help:
1: hold power volume down and home button for around 5/6 seconds then let them go
2: press the volume up key and see if odin recognize the device.
safariking said:
If you want to go blind into download mode maybe the following will help:
1: hold power volume down and home button for around 5/6 seconds then let them go
2: press the volume up key and see if odin recognize the device.
Click to expand...
Click to collapse
i can do that odin recognizes my device
and i flashed stock ROM also
but still its same just one time i got the display in download mode after flash phone restarted n display same as white
I don't know why it was ok in download mode and after reboot it is not.
Sent from my GT-I9105P using Tapatalk
gabi_tz said:
I don't know why it was ok in download mode and after reboot it is not.
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
that i also don't know can u tell me how to flash android mobile
With odin. Download firmware from sammobile.com
Sent from my GT-I9105P using Tapatalk
Sarfu4ndroid said:
that i also don't know can u tell me how to flash android mobile
Click to expand...
Click to collapse
Before we proceed, make sure:
1-You have installed your Samsung Galaxy SII Plus GT-I9105/P USB drivers on your PC.
2-You need to enable USB debugging mode (Settings>Developer options) which is deactivated by default.
3-Your SII Plus GT-I9105/P should have 70-80% charge remaining.
4-Your SII Plus GT-I9105/P should be factory unlocked.
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt.
6-Make sure that kies program is not running & disable antivirus.
How to do it:
Step 1) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up. (For some phones, when you see the construction Android robot and a triangle, press Power again to confirm to enter into Download Mode).
Step 2) Now open ODIN on your PC and connect your Galaxy SII Plus GT-I9105/P to your computer.
Step 3) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue and will show the COM port number.
Step 4) unzip the downlowded file, u will get a Home.tar file.
Step 5) click on pda in odin (if odin 3.09 choose AP) and choose the file "xxxx.tar.md5"
Step 6) check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Pass". your phone will restart (first boot will take a longer time so don't panic)
It is recommended to make hard reset after flashing to have a fresh official firmware.
DenisRonaldo798 said:
Before we proceed, make sure:
1-You have installed your Samsung Galaxy SII Plus GT-I9105/P USB drivers on your PC.
2-You need to enable USB debugging mode (Settings>Developer options) which is deactivated by default.
3-Your SII Plus GT-I9105/P should have 70-80% charge remaining.
4-Your SII Plus GT-I9105/P should be factory unlocked.
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt.
6-Make sure that kies program is not running & disable antivirus.
How to do it:
Step 1) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up. (For some phones, when you see the construction Android robot and a triangle, press Power again to confirm to enter into Download Mode).
Step 2) Now open ODIN on your PC and connect your Galaxy SII Plus GT-I9105/P to your computer.
Step 3) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue and will show the COM port number.
Step 4) unzip the downlowded file, u will get a Home.tar file.
Step 5) click on pda in odin (if odin 3.09 choose AP) and choose the file "xxxx.tar.md5"
Step 6) check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Pass". your phone will restart (first boot will take a longer time so don't panic)
It is recommended to make hard reset after flashing to have a fresh official firmware.
Click to expand...
Click to collapse
ya i know this thankx but its not working for after flashing stock its the same as before
??
Sarfu4ndroid said:
can anyone help me whats the reason when u get white screen all over the device anywhere recovery,Download mode ...... CM11 made my phone equal to dead
Click to expand...
Click to collapse
What you've done before, did you flash any customs/zip files??, have you tried flash it to the stock using Odin??
Related
UPDATED 04/08/11 - Thanks for the comments to make this process less confusing
I have seen a lot of questions about how to use Odin to flash your SGS4G. I am a noob as well and had to search throughout the forums to get the answers so here it is, plain and simple:
1. Download the Stock + Root rom (.tar file) posted by Krylon360 (kudos) HERE, or a rom from anyone else that has one being built for the SGS4G (use caution, do not attempt to flash a rom for a different device!)
2. Install the SGS usb driver 32-bit or 64-bit
3. Download Odin 1.7 HERE and RUN IT FIRST (before you plug in your phone in step 5 - this allows Odin to find your phone)
4. Remove your memory and sim card (I did this because Odin failed to flash my phone when they were present)
5. Put your SGS4G into Download mode (Hold volume up + volume down then plug in your usb cable running from the compy) You should see a big triangle symbol
6. Wait for your computer to install all drivers (takes a minute)
7. In Odin click the PDA button and select the rom (.tar file)
8. Make certain that Re-Partition is not checked
9. Click the start button and let it do its magic (takes a couple minutes)
10. After it completes your phone will reboot into recovery mode
11. Select reboot system now with the power button (takes a couple minutes to establish the new system)
Like everyone has said before, we are not responsible if you brick your phone. This process worked flawlessly for me.
My thanks go out to the people that are working on the roms and recovery systems that make this all possible. You should thank them by donating or by clicking the thanks button.
pixelbrain said:
3. Make sure your phone is rooted (via SuperOneClickRoot)
Click to expand...
Click to collapse
I was not able to root my phone using SuperOneClick Root and I used this process TO root my phone with krylon's stock + root ROM so I am no sure this step is necessary. Just my two cents. . .
Good point. Didnt think about that.
Sent from my SGH-T959V using XDA App
Is it possible to flash original Vibrant ROMS to the SG4G?
dsvnty7 said:
Is it possible to flash original Vibrant ROMS to the SG4G?
Click to expand...
Click to collapse
No it is not. This will brick your phone. Do not try this.
pixelbrain said:
3. Make sure your phone is rooted (via SuperOneClickRoot)
5. Remove your memory and sim card
Click to expand...
Click to collapse
I've never heard of you having to root your phone for using Odin to flash your phone. As long as you can get into download mode. You should be able to flash your phone using Odin.
Also I've never had to remove my memory or sim card either. This is true with my SGS4G and when I had my Vibrant.
Please provide download links to Odin and stock TAR for the Super Noobs. Not all noobs know how to use the Search..hehe.
i never removed my memory card or sim and it still works fine
Step 1 -- Get a Windows box
Also, ODIN is available off links at http://www.samfirmware.com/
Do you guys know how long it usually takes for Odin to do its thing? I've been waiting for 20 minutes and it's stuck at
<ID:0/003> SetupConnection..
Thanks.
FBis251 said:
Do you guys know how long it usually takes for Odin to do its thing? I've been waiting for 20 minutes and it's stuck at
<ID:0/003> SetupConnection..
Thanks.
Click to expand...
Click to collapse
Are you in Download mode? (see step 5 above)
pixelbrain said:
Are you in Download mode? (see step 5 above)
Click to expand...
Click to collapse
I've got a screen that's got the Android in the background next to a triangle with an exclamation mark on it. Up top it says:
Android system recover (3e)
Samsung Recovery Utils
- for BML -
Gives me options to reboot system, reinstall packages, delete all user data, delete cache data.
FBis251 said:
I've got a screen that's got the Android in the background next to a triangle with an exclamation mark on it. Up top it says:
Android system recover (3e)
Samsung Recovery Utils
- for BML -
Gives me options to reboot system, reinstall packages, delete all user data, delete cache data.
Click to expand...
Click to collapse
You are in Recovery mode. To flash the rom with Odin you need to be in Download mode.
pixelbrain said:
You are in Recovery mode. To flash the rom with Odin you need to be in Download mode.
Click to expand...
Click to collapse
Got it! I wasn't pressing both volume buttons, and I was starting it without the usb cable plugged into the computer. Thanks for the help.
FBis251 said:
Got it! I wasn't pressing both volume buttons, and I was starting it without the usb cable plugged into the computer. Thanks for the help.
Click to expand...
Click to collapse
No problem glad its working have fun
Sent from my SGH-T959V using XDA App
So i don't need to root so just use the guide
Sent from my SGH-T959V using XDA Premium App
mikepw28 said:
So i don't need to root so just use the guide
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
That's correct. No need to root.
pixelbrain said:
5. Put your SGS4G into Download mode (Hold volume up + volume down then plug in your usb cable running from the compy) You should see a big triangle symbol
Click to expand...
Click to collapse
The easiest way for me was to start with the battery out, then plug in the usb and hold down both volume buttons and then put the battery back in. Not sure if this is necessary but the way your describing sounds like it puts you in recovery mode. Does the usb cable being in automatically put you in download mode? (at work or I would test this)
t-mo123 said:
The easiest way for me was to start with the battery out, then plug in the usb and hold down both volume buttons and then put the battery back in. Not sure if this is necessary but the way your describing sounds like it puts you in recovery mode. Does the usb cable being in automatically put you in download mode? (at work or I would test this)
Click to expand...
Click to collapse
Whatever way gets you in there
If the usb cable is plugged in first, it sets the phone into a battery charge mode (not sure if that's what it is called exactly) and does not allow you to go into download mode if you try pressing vol up and down.
t-mo123 said:
The easiest way for me was to start with the battery out, then plug in the usb and hold down both volume buttons and then put the battery back in. Not sure if this is necessary but the way your describing sounds like it puts you in recovery mode. Does the usb cable being in automatically put you in download mode? (at work or I would test this)
Click to expand...
Click to collapse
Thats the quickest way to get into download mode.
I either do it that way and pull the battery out first or when the phone is off I'll hold the volume up and down and then plug in the usb cable. Either way works best with me.
I know the OP does not list this but I use this quick and easy way with my phone plugged in and turned on.
open command prompt (windows key + r, then type cmd)
cd C:\Android-sdk-windows\tools (C drive is where my sdk folder is)
adb reboot download
The phone will reboot and go right into download mode. never have to pull battery or push multiple buttons. Hope I dont confuse anyone
I have Galaxy ace
I wanted to switch to 2.3.3, so I downloaded the software ROM manager did flash. He asked me to pick and chose just Pelephone Pelephone, he wrote that he succeeded. After Flash went to Backup (backup), I clicked, boom turned off. I gave him a minute or two That's it.
BY THE WAY, you know what this Emergency MOD? Computer can recognize it is about this situation.
help?plzzzzzzzzzzzzzz
it seems that you tried to show some intelligence in flashing rom
who said you to flash with rom manager when the site clearly stated that you have to use odin to flash rom.
the only thing now you can try is putting you phone in download mode and flash with odin and follow the flash guide directions below-
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take 5-10 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
Hey dude
tnx for hlp,but he dont get into download mode and recovery mod.
he Not Responding for nothing.
when i try to turn it on,recovery mod.download mod, he wont boot.
sorry to say but i think you bricked or semi-bricked your ace...
i got more then less same problem..
just have my galaxy ace GT-S5830
needed restart.. try turn on again... only thing he did was buzzing and samsung came in the screen lightning on and off... but wasnt able to continue to normal android menu...
i try a restart now
in small yellow i see downloading.. hope it works..
else i bring it back to the shop.. phone is just 1!! day old
guddu2011 said:
sorry to say but i think you bricked or semi-bricked your ace...
Click to expand...
Click to collapse
How to solve bricked SGA?
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
alstonleo said:
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
Click to expand...
Click to collapse
Facing the same problem, the critical point the mobile does not respond to power up (either turning on, recovery mode or even download mode), any help please??? I got this mobile less than month now
Samsung Galaxy Ace Wont Boot!!
when i press the power button of my galaxy ace, baring in mind the battery has charge, the empty battery indicator comes up and then the phones turns off straight away. i have tried flashing different versions of android hoping it was a buggy firmware but no luck. this also happens when plugging the phone into an ac power supply. any help?????????
If you cannot access the download mode or the recovery mode then your phone is bricked. All what you can do is go to the service center and pull up a nice story about how it happened while you were sleeping. If you are lucky enough, you will get a replacement.
Btw WRONG THREAD. THERE IS A SEPARATE ONE FOR THE ACE.
TeamCooper Developer
TheMyth Developer
www.teamcooper.net
Galaxy ACE only displaying the word "Android"
Same problem here, only I use Ubuntu 12 and was wondering if there is a way of re-flashing using download mode and Ubunu?
my phone get a blue screen cant get past it. the factory reset do not fix it anyway to rebuild the rom in my phone? the photo below it the blue screen i get.
If you can get it to download mode this will work
hroark13 said:
I created and ED13 rooted Odin recovery for those who have a phone that wont boot
THIS WILL WIPE ALL YOUR DATA
1. Download and unzip the file.
2. Install the Samsung USB drivers
3. Put phone in Download Mode by holding Vol down, Camera Button, and Power button until the Yellow Downloading message appears
4. Plug phone into USB port
4. Open Odin, you should see a yellow box with a com number
5 Select SPHM820.ops file and the ED13_SPHM820_ROOTED_PDA.tar in the appropriate Boxes
6 Click Start
If you have a really screwed up phone you can flash all three tar files and everyting will back to ED13
DOWNLOAD
megaupload.com/?d=5NPEJT9I
Click to expand...
Click to collapse
double post sorry
Installing CWM, Making a Backup and Rooting on the Galaxy R I9103:
All you need is:
ODIN
CWM
Superuser
Completely Switch off your Galaxy R I9103 (wait for vibration to confirm switch off)
Switch on in Download mode by pressing Vol Down + Home Button + Power button simultaneously
You will see a warning for installing custom firmware, just confirm it by pressing Vol Up and enter in download mode.
Start ODIN software on your PC
Connect your Galaxy R I9103 to your PC via USB cable
Now you should see "Added" in ODIN message box, if not please check and install Samsung USB drivers again.
Click on PDA tab and browse to the ".tar" inside the CWM file
Don`t change any other option in Odin, make sure Re-Partition is not checked
Press start button and you will be done within 2 minutes and Odin will show as Pass.
Now your mobile will reboot automatically
CWM Recovery is installed.
* NOW MAKE A CWM BACKUP OF YOUR DEVICE! *
Completely Switch off your Galaxy R I9103 (wait for vibration to confirm switch off)
Switch on in CWM recovery mode by pressing Power button, waiting for "Galaxy R" splash screen, and then pressing Vol Up + Home Button simultaneously
Make a Backup (Use Vol keys to scroll)
Now its time to root your device by installing Superuser
Completely Switch off your Galaxy R I9103 (wait for vibration to confirm switch off)
Switch on in CWM recovery mode by pressing Power button, waiting for "Galaxy R" splash screen, and then pressing Vol Up + Home Button simultaneously
Click on to “install zip from SD card” (Use Vol keys to scroll)
Select Zip from SD card >> select the superuser ZIP file
After the ZIP is installed, reboot the device by going to main menu
Now your Samsung Galaxy R I9103 is rooted, without yellow triangle.
Thanks Mate For Full Tut
Where have you been before?!
My phone have a yellow triangle on a screen, is there any way to remove that? This is my first android phone and i did not backup and i was complete noob about all this
Nephilim983 said:
Where have you been before?!
My phone have a yellow triangle on a screen, is there any way to remove that? This is my first android phone and i did not backup and i was complete noob about all this
Click to expand...
Click to collapse
You can remove the yellow triangle by
1) Flashing back to the original Kernel
2) resetting the binary counter using USB Jig (Check Ebay for "USB Jig Samsung Galaxy S2" and Youtube for instructions)
The yellow triangle is just a warning that you have flashed insecure kernel and i see no danger in that.
Thanks for the reply
as i sad before, i didn't made a backup of stock kernel... where can i find a stock kernel for europe model? i kind a need it... i'll may be returning my phone for service check
Can use CheckFUS to download the European firmware. See this thread.
http://forum.xda-developers.com/showthread.php?t=1408610
ishafiq said:
Can use CheckFUS to download the European firmware. See this thread.
http://forum.xda-developers.com/showthread.php?t=1408610
Click to expand...
Click to collapse
Dude you are a genius
I found my firmware on it...downloading now
...but what should i do with it? use odin and pda option?
Nephilim983 said:
Dude you are a genius
I found my firmware on it...downloading now
...but what should i do with it? use odin and pda option?
Click to expand...
Click to collapse
Yes..Use the ODIN and PDA option to flash the firmware..
You mentioned you will sent phone to service.
Your binary counter will not be reset even though you flash the original firmware.
See if you can buy a USB jig. It might be handy for you always to unbrick you device, in case u brick/semi-brick it.
http://forum.xda-developers.com/showthread.php?t=1068522
You can also home make USB jig from a spare micro USB cable. See instructions here. But be careful of the terminals. http://www.youtube.com/watch?v=Rdn5GoRjhn0
ishafiq said:
Yes..Use the ODIN and PDA option to flash the firmware..
You mentioned you will sent phone to service.
Your binary counter will not be reset even though you flash the original firmware.
See if you can buy a USB jig. It might be handy for you always to unbrick you device, in case u brick/semi-brick it.
http://forum.xda-developers.com/showthread.php?t=1068522
You can also home make USB jig from a spare micro USB cable. See instructions here. But be careful of the terminals. http://www.youtube.com/watch?v=Rdn5GoRjhn0
Click to expand...
Click to collapse
Thank you so much
...will look into the usb jig thing
Thanks again
ishafiq said:
You can remove the yellow triangle by
The yellow triangle is just a warning that you have flashed insecure kernel and i see no danger in that.
Click to expand...
Click to collapse
The main function of the Yellow Triangle, is to show to Samsung Service that you did something that violates the warranty.
So Samsung Service can tell you:
"You have to pay to repair this device, you have violated the warranty."
legion1911 said:
Installing CWM, Making a Backup and Rooting on the Galaxy R I9103:
Completely Switch off your Galaxy R I9103 (wait for vibration to confirm switch off)
Switch on in Download mode by pressing Vol Down + Home Button + Power button simultaneously
You will see a warning for installing custom firmware, just confirm it by pressing Vol Up and enter in download mode.
Start ODIN software on your PC
Connect your Galaxy R I9103 to your PC via USB cable
Now you should see "Added" in ODIN message box, if not please check and install Samsung USB drivers again.
Click on PDA tab and browse to the CWM file
Don`t change any other option in Odin, make sure Re-Partition is not checked
Press start button and you will be done within 2 minutes and Odin will show as Pass.
Now your mobile will reboot automatically
CWM Recovery is installed.
* NOW MAKE A CWM BACKUP OF YOUR DEVICE! *
Completely Switch off your Galaxy R I9103 (wait for vibration to confirm switch off)
Switch on in CWM recovery mode by pressing Power button, waiting a second, and then pressing Vol Up + Home Button simultaneously
Make a Backup on you SD Card (Use Vol keys to scroll)
Now its time to root your device by installing Superuser
Completely Switch off your Galaxy R I9103 (wait for vibration to confirm switch off)
Switch on in CWM recovery mode by pressing Power button, waiting a second, and then pressing Vol Up + Home Button simultaneously
Click on to “install zip from SD card” (Use Vol keys to scroll)
Select Zip from SD card >> select the superuser ZIP file
After the ZIP is installed, reboot the device by going to main menu
Now your Samsung Galaxy R I9103 is rooted, without yellow triangle.
Click to expand...
Click to collapse
Hi,
I installed the CWM and made a backup of the ROM, but when I try to install the SU file (Superuser-3.0.7-efghi-signed.zip) I get this error (see attached file).
MD5 Mismatch from both locations; the MD5 I get from the files is "fc462fa0630379edbe10006b1d19d9b1"
Thanks a lot
Chapter said:
Hi,
I installed the CWM and made a backup of the ROM, but when I try to install the SU file (Superuser-3.0.7-efghi-signed.zip) I get this error (see attached file).
MD5 Mismatch from both locations; the MD5 I get from the files is "fc462fa0630379edbe10006b1d19d9b1"
Thanks a lot
Click to expand...
Click to collapse
Download the file n try again.
Sometimes it may get corrupted during initial download.
Cheers !
I tried few times but the problem don't disappear; Can anybody post the file in another server?
Thanks a lot
Enviado desde mi Galaxy R con tacatá
I've got the same error when flashed superuser over new 2.3.5 today. Surprisingly all still worked perfectly - su is installed and superuser app works.
Maybe because I didn't hard reset and I already had my previous firmware rooted.
Very useful,thanks for all!
Works perfect on my device.
Chapter said:
Hi,
I installed the CWM and made a backup of the ROM, but when I try to install the SU file (Superuser-3.0.7-efghi-signed.zip) I get this error (see attached file).
MD5 Mismatch from both locations; the MD5 I get from the files is "fc462fa0630379edbe10006b1d19d9b1"
Thanks a lot
Click to expand...
Click to collapse
astax said:
I've got the same error when flashed superuser over new 2.3.5 today. Surprisingly all still worked perfectly - su is installed and superuser app works.
Maybe because I didn't hard reset and I already had my previous firmware rooted.
Click to expand...
Click to collapse
A MD5 mismatch means your file is corrupted.
I think superuser should not be installed over another superuser. It is not clear to me why you do that.
If you have problems with superuser, please contact ChainsDD, the developer of Superuser.
DarknessDragon said:
Very useful,thanks for all!
Works perfect on my device.
Click to expand...
Click to collapse
Thank you for the feedback.
Hello.
Quick question/s
1. Will my download count increase if I make a backup of my current android version?
2. Will my warranty be voided when I install CWM in my GSR? I do not have acess to a USB jig so I can not reset the counter....
Thank you.
alister214 said:
Hello.
Quick question/s
1. Will my download count increase if I make a backup of my current android version?
2. Will my warranty be voided when I install CWM in my GSR? I do not have acess to a USB jig so I can not reset the counter....
Thank you.
Click to expand...
Click to collapse
Installing CWM with Odin does not increase the counter.
Making a backup with CWM does not increase the counter.
Installing superuser with CWM does not increase the counter.
Installing the "ardatdat custom kernel with root+overclock" with CWM does not increase the counter.
Installing a stock rom does not increase the counter.
Hi,
I installed CWM and and made a backup of the stock-rom. Then I wanted to copy the backup-file to my pc, but i cant find the clockworkmod/backup folder. There is only a clockworkmod folder and that one is empty. Its the same on the pc and in android. The weird thing is, that i can see the folder and the backup-file in CWM. So I can restore in cwm, but I want to make a backup of the backup to my pc.
Who can help?
please help me
i have samsung galaxy ace gt s5830i. and i installed by mistake this rom
http://forum.xda-developers.com/showthread.php?t=1316027
when installation complete and after restarting
my phone is not working right now , what can i do to fix it
please help me guys
I think u have bricked your phone
Sent from my GT-S5830i using xda app-developers app
Deepak sai said:
I think u have bricked your phone
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Is there a solution, please?
When i press the power button
The phone works but the touch screen does not work
In order to open the lock screen charging also works
Here are the four things you need to download :
1 Odin Multi Uploader https://docs.google.com/file/d/0BwNC...1dw/edit?pli=1
2 Cooper OPS file https://docs.google.com/file/d/0BwNC...ldw/edit?pli=1
3 Samsung Drivers (You only need these if you dont have Kies installed. If you never installed Samsung Kies, then install these drivers) https://docs.google.com/file/d/0BwNC...0dw/edit?pli=1
4 The Firmware Package https://docs.google.com/file/d/0BwNC...rive_web&pli=1
Ok, once you download all those, follow these steps:
5 Unplug your phone from the PC
6 Install the Samsung Drivers and reboot your PC
7 Extract the Firmware Package zip file and place the two files directly on your desktop
8 Run the Odin program
9 Put your phone in Download Mode (p Volume Down Key + home button) and connect it to the PC
10 Put a checkmark on the One Package, Auto Reboot, and Protect OPS options.
11 Click on the OPS Button, and load the Cooper OPS file you downloaded
12 On the bottom of Odin, click on the One Package button.
13 Choose the long named file (S5830DDQ8_ etc.) from your desktop that you unzipped from the firmware package file
14 Press the Start button on Odin
15 Wait about 5-10 minutes, until Odin says "Pass!" at the top. You can then disconnect your phone and if it doesnt reboot on its own, turn it on.
Very Important: As soon as your phone loads, do a factory reset to avoid bootloop. Go into the Settings App, choose Privacy, and then reset the phone. This will complete the process and your phone will be back to an "out of the box" condition.
or if you have taken a backup of your current rom then simply restore the backup. if you don't have the backup, then I cannot help... sorry...
Can your phone boot into recovery mode
Sent from my GT-S5830i using xda app-developers app
If you cant get into download mode then take the battery out and then back in. have odin open and ready but dont connect the phone. push both volume buttons at the same time and the home button then plug in the usb cable.
thank you
:laugh::laugh::laugh::laugh::laugh:
thanks a lot every one here . i follow these instructions to fix my phone
http://forum.xda-developers.com/showpost.php?p=30731352