UPDATED 04/08/11 - Thanks for the comments to make this process less confusing
I have seen a lot of questions about how to use Odin to flash your SGS4G. I am a noob as well and had to search throughout the forums to get the answers so here it is, plain and simple:
1. Download the Stock + Root rom (.tar file) posted by Krylon360 (kudos) HERE, or a rom from anyone else that has one being built for the SGS4G (use caution, do not attempt to flash a rom for a different device!)
2. Install the SGS usb driver 32-bit or 64-bit
3. Download Odin 1.7 HERE and RUN IT FIRST (before you plug in your phone in step 5 - this allows Odin to find your phone)
4. Remove your memory and sim card (I did this because Odin failed to flash my phone when they were present)
5. Put your SGS4G into Download mode (Hold volume up + volume down then plug in your usb cable running from the compy) You should see a big triangle symbol
6. Wait for your computer to install all drivers (takes a minute)
7. In Odin click the PDA button and select the rom (.tar file)
8. Make certain that Re-Partition is not checked
9. Click the start button and let it do its magic (takes a couple minutes)
10. After it completes your phone will reboot into recovery mode
11. Select reboot system now with the power button (takes a couple minutes to establish the new system)
Like everyone has said before, we are not responsible if you brick your phone. This process worked flawlessly for me.
My thanks go out to the people that are working on the roms and recovery systems that make this all possible. You should thank them by donating or by clicking the thanks button.
pixelbrain said:
3. Make sure your phone is rooted (via SuperOneClickRoot)
Click to expand...
Click to collapse
I was not able to root my phone using SuperOneClick Root and I used this process TO root my phone with krylon's stock + root ROM so I am no sure this step is necessary. Just my two cents. . .
Good point. Didnt think about that.
Sent from my SGH-T959V using XDA App
Is it possible to flash original Vibrant ROMS to the SG4G?
dsvnty7 said:
Is it possible to flash original Vibrant ROMS to the SG4G?
Click to expand...
Click to collapse
No it is not. This will brick your phone. Do not try this.
pixelbrain said:
3. Make sure your phone is rooted (via SuperOneClickRoot)
5. Remove your memory and sim card
Click to expand...
Click to collapse
I've never heard of you having to root your phone for using Odin to flash your phone. As long as you can get into download mode. You should be able to flash your phone using Odin.
Also I've never had to remove my memory or sim card either. This is true with my SGS4G and when I had my Vibrant.
Please provide download links to Odin and stock TAR for the Super Noobs. Not all noobs know how to use the Search..hehe.
i never removed my memory card or sim and it still works fine
Step 1 -- Get a Windows box
Also, ODIN is available off links at http://www.samfirmware.com/
Do you guys know how long it usually takes for Odin to do its thing? I've been waiting for 20 minutes and it's stuck at
<ID:0/003> SetupConnection..
Thanks.
FBis251 said:
Do you guys know how long it usually takes for Odin to do its thing? I've been waiting for 20 minutes and it's stuck at
<ID:0/003> SetupConnection..
Thanks.
Click to expand...
Click to collapse
Are you in Download mode? (see step 5 above)
pixelbrain said:
Are you in Download mode? (see step 5 above)
Click to expand...
Click to collapse
I've got a screen that's got the Android in the background next to a triangle with an exclamation mark on it. Up top it says:
Android system recover (3e)
Samsung Recovery Utils
- for BML -
Gives me options to reboot system, reinstall packages, delete all user data, delete cache data.
FBis251 said:
I've got a screen that's got the Android in the background next to a triangle with an exclamation mark on it. Up top it says:
Android system recover (3e)
Samsung Recovery Utils
- for BML -
Gives me options to reboot system, reinstall packages, delete all user data, delete cache data.
Click to expand...
Click to collapse
You are in Recovery mode. To flash the rom with Odin you need to be in Download mode.
pixelbrain said:
You are in Recovery mode. To flash the rom with Odin you need to be in Download mode.
Click to expand...
Click to collapse
Got it! I wasn't pressing both volume buttons, and I was starting it without the usb cable plugged into the computer. Thanks for the help.
FBis251 said:
Got it! I wasn't pressing both volume buttons, and I was starting it without the usb cable plugged into the computer. Thanks for the help.
Click to expand...
Click to collapse
No problem glad its working have fun
Sent from my SGH-T959V using XDA App
So i don't need to root so just use the guide
Sent from my SGH-T959V using XDA Premium App
mikepw28 said:
So i don't need to root so just use the guide
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
That's correct. No need to root.
pixelbrain said:
5. Put your SGS4G into Download mode (Hold volume up + volume down then plug in your usb cable running from the compy) You should see a big triangle symbol
Click to expand...
Click to collapse
The easiest way for me was to start with the battery out, then plug in the usb and hold down both volume buttons and then put the battery back in. Not sure if this is necessary but the way your describing sounds like it puts you in recovery mode. Does the usb cable being in automatically put you in download mode? (at work or I would test this)
t-mo123 said:
The easiest way for me was to start with the battery out, then plug in the usb and hold down both volume buttons and then put the battery back in. Not sure if this is necessary but the way your describing sounds like it puts you in recovery mode. Does the usb cable being in automatically put you in download mode? (at work or I would test this)
Click to expand...
Click to collapse
Whatever way gets you in there
If the usb cable is plugged in first, it sets the phone into a battery charge mode (not sure if that's what it is called exactly) and does not allow you to go into download mode if you try pressing vol up and down.
t-mo123 said:
The easiest way for me was to start with the battery out, then plug in the usb and hold down both volume buttons and then put the battery back in. Not sure if this is necessary but the way your describing sounds like it puts you in recovery mode. Does the usb cable being in automatically put you in download mode? (at work or I would test this)
Click to expand...
Click to collapse
Thats the quickest way to get into download mode.
I either do it that way and pull the battery out first or when the phone is off I'll hold the volume up and down and then plug in the usb cable. Either way works best with me.
I know the OP does not list this but I use this quick and easy way with my phone plugged in and turned on.
open command prompt (windows key + r, then type cmd)
cd C:\Android-sdk-windows\tools (C drive is where my sdk folder is)
adb reboot download
The phone will reboot and go right into download mode. never have to pull battery or push multiple buttons. Hope I dont confuse anyone
Related
okay so i've seen where you use the volume up + down + power to go into downloading mode but how do i get to the little digger guy with the shovel? because using odin i dont know if i need to be on the screen with the shovel guy or on the screen where i have the option to reinstall packages, reboot the phone can someone help me?
http://forum.xda-developers.com/showthread.php?t=731989
reading the stickies is a good place to start
but i've followed that thread step by step and i cannot for the life of me get odin to work
every time i do the volume up+down+power it goes into system recovery mode
If your phone functions you can use adb to get in there too. From your SDK tools folder just type "adb reboot download" and it'll send you directly to download mode
its not the recovery mode i have the problem getting to but when i do get there odin wont recigonize my phone and i need to reset to the stock rom which is why i have a feeling i need to get to the android guy with the shovel
jedens said:
its not the recovery mode i have the problem getting to but when i do get there odin wont recigonize my phone and i need to reset to the stock rom which is why i have a feeling i need to get to the android guy with the shovel
Click to expand...
Click to collapse
Follow these steps exactly:
Close odin (if it's open)
Unplug phone from USB
Remove SIM/SD card
Remove Battery
Open Odin
Put battery back in
Plug in USB
Hold both volume keys THEN hold power
Continue holding all 3 keys, the screen will come on, DO NOT LET GO
The screen will go black, then turn on again- as soon as it turns off for the second time let go of the power button but continue holding the volume keys.
In a couple seconds you should get the download screen
jedens said:
its not the recovery mode i have the problem getting to but when i do get there odin wont recigonize my phone and i need to reset to the stock rom which is why i have a feeling i need to get to the android guy with the shovel
Click to expand...
Click to collapse
I understand the frustration, there are a lot of stickies currently and numerous pages to browse to find information on entering download mode.
Try this:
1.) Remove the Battery, SIM card and micro SD Card.
2.) Reinstall the Battery. (DO NOT TURN ON THE DEVICE)
3.) Hold ONLY the volume buttons down and then insert the USB cable.
This should bring you into download mode (The android guy/shovel and will say "downloading....")
You do not need to press the power button at all for this method. Also, be sure to have installed the drivers for the device.
Colton5419 said:
I understand the frustration, there are a lot of stickies currently and numerous pages to browse to find information on entering download mode.
Try this:
1.) Remove the Battery, SIM card and micro SD Card.
2.) Reinstall the Battery. (DO NOT TURN ON THE DEVICE)
3.) Hold ONLY the volume buttons down and then insert the USB cable.
This should bring you into download mode (The android guy/shovel and will say "downloading....")
You do not need to press the power button at all for this method. Also, be sure to have installed the drivers for the device.
Click to expand...
Click to collapse
Yes, this is what I did and it works like a charm.
ONLY hold in the Vol-Up/Vol-Down buttons while plugging in the USB cable.
DO NOT press the power button.
thank you so much colton!!!! that worked so easily
haha, I see, you were using the directoins for getting out of the cell-!-cpu screen...
This is posted in the wrong section
Next time if you have a question that's unrelated and not a.topic of android development, can you please post in the general section? This is not the only forum people read and people will respond.
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
Sent from my SAMSUNG-SGH-I897 using XDA App
The phone is bricked. I flashed to the i9000 firmware and was about to root the phone and didn't bother to flash the new kernel yet. I get into recovery to go to reinstall packages to install the root, and to my surprise the power button didn't work to select since I had the wrong kernel. SO I do adb reboot download and then I try to flash the new kernel. Odin just freezes there and doesn't do anything, I unplug the data cable and then it says FAIL! on Odin. I take out the battery and put it back in to see if the phone will still boot, and now I'm stuck on the phone/computer. People have tried helping and they told me about every single key combo to put it in download and none of them work. When I told Vol+ and power the screen flashes black and then I wait for it to do it the second time and i let go of the power and it stays there at phone/computer. I've done everything I can possibly see to do it and this is my last hope to get it to work again, or else I have to take it to AT&T and lose all my stuff on the internal SDcard.
EDIT: AT&T refuses to replace the phone.
From designgears' one click Odin thread. Not sure if you tried this, but it might work.
Good luck.
EDIT: realized it might be helpful if I included the link to the actual thread. Sorry about that.
http://forum.xda-developers.com/showthread.php?t=731989
designgears said:
WARNING: "MASTER CLEAR" WILL WIPE YOUR BUILT-IN STORAGE!
I am not responsible for any damage caused to your device.
What is this?:
If you see the "phone+!+computer" screen, you need this! If you deleted something you shouldn't have and can't get it back on your phone, this is probably your best bet. This is the Odin3 One-Click Downloader for restoring your phone from a completely software bricked state, or for whatever purpose you see fit to use it for. You don't have to change any settings, it is all pre-packaged and ready to go.
If this has helped you out, please consider buying me a beer!
How to use:
Download and install the correct drivers below (mac and linux don't need drivers)
Plug in your usb cable to your phone and computer
Open Odin
Enter Download Mode (see below)
Click Start
Be Patient, the first boot will take a while
How to use Master Clear:
Boot your phone up normally with usb debugging on
Click Master Clear
How to enter download mode:
Method 1ADB - from recovery or normally booted with usb debugging on)
Open a cmd prompt/console/shell
adb shell
adb reboot download
Method 2KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold Volume Up + Volume Down + Power
Method 3KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
Drivers:
Windows 64bit
Windows 32bit
I897UCJF6 - Odin3 One-Click Downloader:
http://www.thevod.org/misc/captivate/I897UCJF6-final-OCD-REV0.rar
The internal beta's are NOT one-click, please read the linked threads
UPDATE: I897UCJH2 (Internal BETA)
You can get it here
UPDATE: I897UCJH3 (Internal BETA)
You can get it here
Click to expand...
Click to collapse
deuX` said:
From designgears' one click Odin thread. Not sure if you tried this, but it might work.
Good luck.
EDIT: realized it might be helpful if I included the link to the actual thread. Sorry about that.
Click to expand...
Click to collapse
Yeah I've tried this already. Nothing will work.
Is there anyone that can help X_x
what did you tell att and what did they say?
di11igaf said:
what did you tell att and what did they say?
Click to expand...
Click to collapse
"We can't replace the phone since you are not the original buyer of the phone. Talk to the person you traded with to get the receipt"
Apparently my phone was stolen because when I mention the receipt, he doesn't reply.
Phone is stuck on att white world phone logo and is not going to download mode by holding the volume buttons and power, and or volume down and power.
When i hold the buttons and plug it in and all i see is a damn battery that goes on then off. Odin is open and does seem change.
All this just to get some bloatware and fix a gps.
Try the third option which is the only one works for me:
1. Take battery out and put back
2. Hold both Vol buttons. Don't touch the power button.
3. Plug in the USB cable to your PC. Don't touch the power button.
Your phone should boot into download mode right away. Remember, don't ever touch the power button.
WOW
wow dude perfect you saved me from freaking out! hah SOLVED thanks a million bad power button!
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
foxbat121 said:
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
Click to expand...
Click to collapse
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Just do a search for captivate jig
kang0saur said:
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Click to expand...
Click to collapse
Look in my sig.
Entering Download Mode but odin not working
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
evedavis58 said:
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Here is the procedure you need to follow:
1. Install the proper driver so that ODIN can see your phone when plugged in. Drivers are listed in the thread where you download ODIN.
2. Open ODIN with phone not attached. Select the firmware file (*.rar) you want to flash in PDA field.
3. Power off the phone and enter into download mode and connect the phone to PC.
4. Wait for the driver to install and your phone recognized. It will show up in one of the boxes in ODIN.
5. Once your phone is recognized, press Start button on ODIN to start the flash process.
6. Leave the PC and phone alone for a few minutes and pray (that your phone didn't get bricked in the process).
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Cog does not use Odin. Just get clockwork recovery and install it. Then boot into recovery and flash cog. Go to stickies in dev section, there are guides.
I try to select cognition.rar but says it needs a .tar file. What do I do to make it work?
Cog does not install with Odin unless dg added that. You need to unrar it. Download winrar and extract it, see what's inside.
Sent from my Captivate using XDA App
This guide lays it out pretty well. http://forum.xda-developers.com/showthread.php?t=884364
Personally, here's what I use to do. Go to the Dev section and search for ClockworkMod Recovery. Search that thread for the update.zip. I'm sure it's in there. Put the update.zip on your internal storage, ie, when you plug phone into pc with USB the thing you mount and store file on, not an added SD card.
Boot into stock recovery. Choose reinstall packages, it reboots. Choose reinstall packages again, now your in Clockwork. Choose > install zip from sdcard > choose zip file > then navigate to Cognition (assuming you've put that on your internal storage also) and select it. It flashes, choose reboot. Bam! You're running Cognition.
evedavis58 said:
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
Click to expand...
Click to collapse
evedavis58 said:
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Click to expand...
Click to collapse
You two need to read more before risking your phone. I sense you soon to have two very expensive bricks on your hand.
I was trying to flash my captivate with adb reboot download and the battery fell out in download mode. I tried volume +/- to fix but no luck! Please help me! Stuck at Phone warning sign computer screen!
odin1click? volumeupdown + insert usb, open odin1click click go.
should fix it.
cerjam said:
odin1click? volumeupdown + insert usb, open odin1click click go.
should fix it.
Click to expand...
Click to collapse
Doesn't go into download mode at all! Just shows the corrupted firmware every time I try it.
can you get a adb connection?
cerjam said:
can you get a adb connection?
Click to expand...
Click to collapse
No, computer doesn't recognize it. If I had an ADB connection, I'd adb reboot download but when I try adb, it says no device found.
try plugging in usb with the battery out and then holding vol+- and inserting the battery while holding the volume buttons if not you need to make a jig.
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
I'm probably just going to go to AT&T tomorrow and get them to exchange it if I can't get it to get into download mode tonight.
norcal einstein said:
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
Click to expand...
Click to collapse
Didn't work, this used to work for me but now no luck. I don't know why it just stopped going into download mode.
Could you usb connect to PC on debug mode? Is this connecton visible from your PC?
aggielover said:
I was trying to flash my captivate with adb reboot download and the battery fell out in download mode. I tried volume +/- to fix but no luck! Please help me! Stuck at Phone warning sign computer screen!
Click to expand...
Click to collapse
That's a semi-bricked screen. No, normal method to go into download mode won't work in this state.
There are instructions to recover from this state into download mode. I have posted a few links in the past but don't have it right now. IIRC, you need to hold both vol buttons and Power button and wait until screen goes blank twice before release the power button so that your phone could go into download mode.
The other way is to rig a microUSB plug with a 301k resistor connected between pin5 and one of the data pin. This will put your phone instantly into download mode. There is a thread dedicated for this. Search.
norcal einstein said:
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
Click to expand...
Click to collapse
Thank you, this worked for me!
aggielover said:
norcal einstein said:
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
Click to expand...
Click to collapse
Didn't work, this used to work for me but now no luck. I don't know why it just stopped going into download mode.
Click to expand...
Click to collapse
I've been having the same issue and none of the methods mentioned on the forums have worked. I recently updated to a custom 2.2.1 rom (Paragon) and when I tried to flash back to stock with odin (afterwards), it gave me the finger (got stuck in the process). I tried to unplug and plug back in the usb, restart odin, pc, reinstall drivers (none of which helped). So my dumbarse decided to take the battery out to reboot the phone. Usually after doing so in the past, I've been able to manually get into download mode using the 3 button combo, but haven't been able to so far. I haven't tried making a jig yet, knowing me, I might seriously break something that way.
I was reading somewhere that 2.2.1 breaks the 3 button combo (along with 1 click root for that matter). Just wondering if there is anything else I can try or should I just make a jig? Should I take it in to AT&T and see if they can do something or should I call them? Just wanting some advice from the Gurus here.
edit: and "no, I can't do it through ADB or I would've already".
jig it up
xrCore said:
Thank you, this worked for me!
Click to expand...
Click to collapse
was going to suggest the same....thats only happened once (after install of gingerbread alpha) but that was the only thing that worked....the download screen literally jolted on the instant the battery connectors touched.
darthdave said:
I was reading somewhere that 2.2.1 breaks the 3 button combo (along with 1 click root for that matter). Just wondering if there is anything else I can try or should I just make a jig? Should I take it in to AT&T and see if they can do something or should I call them? Just wanting some advice from the Gurus here.
edit: and "no, I can't do it through ADB or I would've already".
Click to expand...
Click to collapse
2.2.1 puts the 3-button setup to whatever the i9000 uses, which is different from the Captivate. Nobody's made a fix yet AFAIK.
for me i managed to get it into download mode, BUT, when i try running Odin it's stuck at "DO NOT TURN OFF TARGET!!"
any thoughts?
Lawliet L Ryuzaki said:
for me i managed to get it into download mode, BUT, when i try running Odin it's stuck at "DO NOT TURN OFF TARGET!!"
any thoughts?
Click to expand...
Click to collapse
What build is your phone, located under battery. Something like 1010
Search for Sparkfun in the dev forum for Captivate. Easy to make jig (that's been mentioned before) that will get you out of the woods.
I am having issues getting into download mode myself. Samsung Captivate SGH-I897. I just got it less than two weeks ago. Played with some of the features. Did the root. Did the ROM manager. Everything I needed to do to have Serendipity 5.12 installed. Did it. worked great. Was missing some of the apps I enjoyed from the gate(Samsung EMail). So i read up that u could make a custom Serendipity in the kitchen.
Put the phone to JH6 from Odin. Also did the master clear. So now I am at 2.1 update 1 from Odin.
However, Now I cant get Clockwork Recovery at all ( when option is selected it goes to default recovery every single time ). I did try to re-install the correct flash for Clockwork, same results.
So, i thought maybe something didnt copy or flash or clear correctly and was going to do an Odin procedure again, cant get into download mode now. NOT AT ALL.
The phone will just re-boot into JH6. It operates normally, however I can shake JH6. No download mode. No Clockwork recovery.
I am noob, I am a quick hands on learner though. Not even sure if this will get the response desired.
OK, so i went and flashed an old backup. Now i can't enter recovery or download mode at all. Can someone help me out? My phone doesn't go passed the SGS4G boot screen. It just stays there. Left it on for three hours and nothing. The only PC i have access to does not have internet. I am typing this on my backup Nokia X2.
Your going to need to download Odin 1.85 and then download any 2.3 and above up to 2.3.6 firmware. I highly recommend also downloading Dr honks kj 1 kernel for it comes with voodoo lag fix and clock work mod recovery.but u must read alot to find what you need because u could possibly ruin your phone permanently!!! Good luck and like I said you must read... it will be your best bet towards reviving your phone and keeping it operational.
I know that and all but no matter what i do. I cannot enter download mode at all. I can't even enter recovery. The only buttons i can press are the only 3 hardware keys. My soft-keys don't work.
When u can use your computer again.set up Odin then plug your USB cable in then before you connect your phone make sure you take the battery out leave the backing off your phone.then plug your USB to your phone be sure to hold vol. Up and down simultaneously then keep volume up down held down and put your battery in, that should put your phone in download option it should also warn you that placing a custom rom or firmware could pose a problem to your phone then I believe the option to put your phone in download mode is volume up once u push up with the volume key you should immediately be put in Andy's download mode.that's really the other alternative that has worked for me always. I certainly hope u get your phone running again bro otherwise you may have to send your phone to warranty replacement that's if its still valid 4 u or if u pay for insurance on your phone, I saw your posts and know your familiar with several how to's and such so like u said good luck to you homez.
Sent from my SGH-T959V using xda premium
Please use the Q&A Forum for questions Thanks
Moving to Q&A
pwner5889 said:
I know that and all but no matter what i do. I cannot enter download mode at all. I can't even enter recovery. The only buttons i can press are the only 3 hardware keys. My soft-keys don't work.
Click to expand...
Click to collapse
Ever have any luck?
this should have the info you need http://forum.xda-developers.com/showthread.php?t=1001759
pwner5889 said:
I know that and all but no matter what i do. I cannot enter download mode at all. I can't even enter recovery. The only buttons i can press are the only 3 hardware keys. My soft-keys don't work.
Click to expand...
Click to collapse
Download mode is holding the 2 volume key and plug in the USB port is that what u tried?
iCrazyNoob said:
Download mode is holding the 2 volume key and plug in the USB port is that what u tried?
Click to expand...
Click to collapse
Yes. I tried that. Nothing happened at all. Made sure the battery was pulled before i plugged the usb cable in. I held down the volume keys while putting the battery back in. Nothing happened. Drivers were installed and everything.
pwner5889 said:
Yes. I tried that. Nothing happened at all. Made sure the battery was pulled before i plugged the usb cable in. I held down the volume keys while putting the battery back in. Nothing happened. Drivers were installed and everything.
Click to expand...
Click to collapse
Your other option is to download the Android Software Development Kit (SDK) & install it. It contains 'adb' which will allow you to reboot the phone into download or recovery mode.
Go to http://developer.android.com/sdk/index.html, download and install the SDK. You only need to install the Tools part, not all of the other parts.
Once done, open a command prompt, cd to the platform-tools directory where the SDK installed, and issue the command:
adb reboot download
That should get you there.
stephen_w said:
Your other option is to download the Android Software Development Kit (SDK) & install it. It contains 'adb' which will allow you to reboot the phone into download or recovery mode.
Go to http://developer.android.com/sdk/index.html, download and install the SDK. You only need to install the Tools part, not all of the other parts.
Once done, open a command prompt, cd to the platform-tools directory where the SDK installed, and issue the command:
adb reboot download
That should get you there.
Click to expand...
Click to collapse
OK, ill try it when i can get access to a PC with internet access.