My galaxy Y is not switching on.When i turns it on it comes to the screen where it is written samsung and then it starts turning on again.I am not able to see the home screen.I rooted it recently then my brother coincidently restored the factory settings due to which the same is happening.Please help me how can i recover my phone back to normal.
kgarg said:
My galaxy Y is not switching on.When i turns it on it comes to the screen where it is written samsung and then it starts turning on again.I am not able to see the home screen.I rooted it recently then my brother coincidently restored the factory settings due to which the same is happening.Please help me how can i recover my phone back to normal.
Click to expand...
Click to collapse
1. try hard reset ,, hold volume-up + Center botton + power on for 5secs until recovery display on the screen...if the recovery display , scroll down then select wipe factory reset,,,all will be lost...then reboot....
2. if not ok in no.1 procedure ,,proceed to flashing..
use multi-loader freesoft..
then download the specefic firmware then flash... just use google for other procedure...
Related
I started kies and after connecting my Galaxy FIT, I started upgrading the firmware it showed. Then it stopped and asked for emergency recovery. I did it, but it stopped again and phone got switched off and after that it is only showing a error sign with yellow triangle between a PC and mobile. It is not showing anything else though I have tried switching off and taking out battery. It is not working at all, just the error sign. Please help.
Sounds like a "soft Bricked" phone.
Can you boot in to download mode?
Press Volume Down + Home Key (middle button) + Power Button at the same time.
If the phone boots you into download mode (a yellow triagle with a digging android) with words "Downloading"....
Then you can still revive your phone.
this happened to me once..but later i tried pulling off the battery and restarting the sysytem...
try to take off the battrery and plug it again and try to go in DOWNLOAD MODE!..(i did it 2 or 3 times)
..and its definitely not a "SOFT BRICK" '!!
galaxy fit + CM7.1 (2.3.7) + 801Mhz
same happened to me
when first i flashed cyanogen 7.1 , 2.3.7 it happened to me, i just give tha droid a factory reset then following the instructions i flashed the rom from sd card via recovery then when reboot , just came up the cyanogen logo then tha lil letters(android) but just sttoped there no more, i taked out the lbatt, twice, then the alert logo came up......i was so scared.....sh-t !
but then i just remember to go to download mode pressing home , volume + and on/off then i reflash via odin but nothin happened, then y reestart the fir then i try to open in recovery i pushed home key and on/off and the cyanogen recovery just started i gave the phone again not only a data factory reset but, cache and the battery and everything i could reset, then i do it again thru recovery i flased the cyanogen and at las it works, i think like richard says was a soft bricked, try everything , via odin, via recovery.......
i thanks neil cause he helped me a lot!!!
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
same issue
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Ces123 said:
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
Click to expand...
Click to collapse
Same problem
any help ???
On which verison thar ur on???? have u tried to wiping data in stock recovery
??
same problem I'm having with my Samsung Gt-p6200, it just boot-loops to the "samsung galaxy tab 7.0" boot loading screen and hangs.. these happened after i flashed my firmware from stock honeycomb to jellybean(the austria firmware, i think that's been posted in this forum).
here's what happened before the problem:
-I flash the stock honeycomb firmware with the jellybean one that i found here..
-after i flashed using ODIN, the new firmware works great, i was even informed that i have free 50GB worth of dropbox space,
the file was named P6200XXMC3_P6200OXAMC3_ATO
- I have used it for a day, until the battery drains and i have to charge, but when i opened it again, it already does this "boot loop" problem
- i have tried flashing CWM with ODIN(as i've read here somewhere that it might help) and do that wipe cache and factory reset thing but that didnt help solved the problem.
hope anyone could help me, im also thinking flashing it back to it's original stock firmware but I dont have a backup of that and I dont know where to get one, I've been searching the net for two days for that stock rom but all i found are the new jellybean ones and some old ones but is uploaded to hotfile which is now deleted or locked.
I hope you guys could help me out and thanks in advance!
try flashing a new , latest firmware on odin
just try it.
ovox0 said:
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Click to expand...
Click to collapse
Hello guys! Im also having this same issue.
*Using the same firmware that was posted here in xda because i was having trouble downloading those official jellybean firmwares
*The battery got drained
then if i charge it, it will remain in a "blank slightly illuminated screen"
* after a few munutes, the tab gets really warm.
*but if i dont charge it, it will get drained again because it keeps on turning on itself back to this time to the "galaxy tab plus screen"
I cant access recovery mode.
I can access odin mode and can flash successfully with cwm or the same firmware back but the problem still persist.
I havent tried other firmwares though.
4 days passed already and i cant figure this out
Please help
So I had this happen to me yesterday, where it rebooted randomly on me, only to freeze on the Galaxy Tab 7.0 Plus screen. I had custom recovery (TWRP) don't know if that matters, but I was able to access it by holding Power+UpVol but keep it held. It would freeze on the same spot but since I was still holding the keys it reboots a second time and this time it would go into recovery.
I then wipes cache and dalvik, no go. Sadly did a full wipe. Still no going past the tab plus text. So I flash MF1 official 4.1.2 firmware (I was previously on 4.1.2 UK official) still no go. Put in latest 2.8 TWRP and booted into it still with some trouble as I mentioned above. Did another wipe and it then hung on blank screen or so I thought. Took a long time to boot and after a long time, and the Android is upgrading message, by some weird chance I was on the MF1 official rom but all my apps settings everything was saved.
Working 100% now and I still don't really know what the hell happened. But if this helps anyone then all the better!
My samsung p6200 is woking almost fine but i am not able to go into the download mode when i press volume down button and power the screen is at samsung logo it stays for a while and then it restarts from there,its the stock rom that's messd up i belive any help how to go into downlod mose other way would b apriciated
I recently updated my Galaxy S3 to the new android version 4.3. After the update started everything was normal until the phone shut itself off and did not turn on till now. i checked restarting it plus taking the batteries out and then putting it in nut the phone wont turn on. The phone just shows the samsung logo that glows now and then and nothing more. Please help me what to do and what has happened.
Hanzla007 said:
I recently updated my Galaxy S3 to the new android version 4.3. After the update started everything was normal until the phone shut itself off and did not turn on till now. i checked restarting it plus taking the batteries out and then putting it in nut the phone wont turn on. The phone just shows the samsung logo that glows now and then and nothing more. Please help me what to do and what has happened.
Click to expand...
Click to collapse
Are you on stock firmware and stock update?
Power off your phone and hold power, volume up, and menu button simultaneously, when the screen turns on (samsung Gt-I9300 shows up) then leave the power button ONLY. Then you'll show up to recovery, there wipe user data/factory reset and wipe cahce (partition) and reboot. Wait for some time as it will take some time to boot up...... Another thing, use volume buttons to navigate and power button to select in recovery
Hanzla007 said:
I recently updated my Galaxy S3 to the new android version 4.3. After the update started everything was normal until the phone shut itself off and did not turn on till now. i checked restarting it plus taking the batteries out and then putting it in nut the phone wont turn on. The phone just shows the samsung logo that glows now and then and nothing more. Please help me what to do and what has happened.
Click to expand...
Click to collapse
Check the rom was compatible for your device ???
Just open cwm recovery , wipe cache , dalvic cache , data and factory reset . Flash again the rom and reboot your device . After 5-10 min. your device will start .
Hope I helped . Don't forgot to click :thumbup: button .
Sent from my GT-S7562 using XDA Premium 4 mobile app
after official ICS upgrade to my samsung GT-p6800 , power button is not working for booting up the system. So when i did the reset to factory reset the device restarted but stuck in recovery mode but i cannot select any option because power button is not working. though i can scroll through the option using volume buttons.
Experts help me how to get back my system. Though i have the firware backup.
thanks in advance
Hi guys,
it seems like my touchscreen is broken. first it showed strange colours and the touch stopped working and now it is black.
I just managed to backup my pictures with a usb cable and delete the internal storrage.
How can i turn off my device and how can i make a factory reset?
Hold Power+Home+Volume down, until You see odin mode, then press vol+ and flash newest firmware from sammobile.com .