So...Yellow screen has left! - AT&T, Rogers HTC One X, Telstra One XL

Today I noticed that my warm or yellow screen has gotten whiter..not bluer but just whiter! Freakin awesome. Plus I got my ballistics case and it fits perfect.
Sent from my HTC One X using XDA

My One X is one of the few (two) I've seen that wasn't yellowish, but has a small amount of backlight bleed at the bottom right. I wasn't sure about exchanging it in fear of getting a one with a yellowish screen but you're the second person I've read saying this so maybe there is just some run in time. Considering almost every display I've seen has been warm, I'm guessing most in this forum have one like this. Is the the op's experience that of others as well?

asjdwf said:
Today I noticed that my warm or yellow screen has gotten whiter..not bluer but just whiter! Freakin awesome. Plus I got my ballistics case and it fits perfect.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Nice. Can't wait to get my case, just got my shipping notice

I've heard the yellowish screen (in general, not just One X) is from the adhesive they use to hold the screen and the glass together, and it just needs time before the yellow tint goes away.

Im noticing the same thing. Screen is looking better and better. Im keeping it full brightness for a while to speed things up since its a bit hotter
Sent from my HTC One X using Tapatalk 2

Product F(RED) said:
I've heard the yellowish screen (in general, not just One X) is from the adhesive they use to hold the screen and the glass together, and it just needs time before it the yellow tint goes away.
Click to expand...
Click to collapse
I remember hearing about this on the iPhone 4

ya happened on my old i4 and 4s

Wow.. I'm noticing this big time too
Sent from my HTC One X using xda premium

When you guys talk about the yellow screen, was the whole screen yellow or just some spots? On mine the bottom right corner its like this spot about the size of a 1 inch semi circle it seems to have a yellower tint then the rest of the screen. It's noticeable on white app screens.
I'm not sure if I should return the phone. Just got it today. Or wait it out and hope I have your guys' luck.
Thanks.

just giving this a quick little bump. It dropped to page two already.

asjdwf said:
Today I noticed that my warm or yellow screen has gotten whiter..not bluer but just whiter! Freakin awesome. Plus I got my ballistics case and it fits perfect.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
How long have you had the phone mate? Also what wallpaper you were/are using?
Cheers

Just got it last night and in using the one that it comes with
Sent from my HTC One X using XDA

I have noticed that my display is clearer and more white lately too. I thought I was imagining things, but being others here are reporting it also...i guess I am not lol.
Beamed from my Rogers HTC One XL

Lol thought it was just my eyes getting used to it but after a week I do believe it's getting more white the glues must be drying :thumbup:
Sent from my Rooted Hox

GibMcFragger said:
I have noticed that my display is clearer and more white lately too. I thought I was imagining things, but being others here are reporting it also...i guess I am not lol.
Beamed from my Rogers HTC One XL
Click to expand...
Click to collapse
E.Cadro said:
Lol thought it was just my eyes getting used to it but after a week I do believe it's getting more white the glues must be drying :thumbup:
Sent from my Rooted Hox
Click to expand...
Click to collapse
Was yours just warm/yellow overall or just in some spots more than others?

SkizzMcNizz said:
Was yours just warm/yellow overall or just in some spots more than others?
Click to expand...
Click to collapse
More along the bottom especially the right bottom corner but overall I think the whole screen looks better.
Sent from my Rooted Hox

E.Cadro said:
More along the bottom especially the right bottom corner but overall I think the whole screen looks better.
Sent from my Rooted Hox
Click to expand...
Click to collapse
That's exactly where mine is yellowish also. I guess I'll hold out a while. I have 30 days. One quick question. When you say it looks better, does that spot still look a little different from the rest of the display or has it cleared up to where you don't notice it at all?

SkizzMcNizz said:
That's exactly where mine is yellowish also. I guess I'll hold out a while. I have 30 days. One quick question. When you say it looks better, does that spot still look a little different from the rest of the display or has it cleared up to where you don't notice it at all?
Click to expand...
Click to collapse
I can see still see it on a white screen like the settings menu but not as bad as I thought it was originally
Sent from my Rooted Hox

I KEPT TELLING PEOPLE IT WAS THE DAMN ADHESIVE AND NO ONE LISTENED!!!!!! UGH! Rant over.
The white screens didn't come with enough glue, hence screen bleed, now the yellow screens have cured and look fine. GAH
Sorry... I ate pizza, and that makes me gassy, so I get explosive.
EDIT: Some screens out there really do have issues though, so everyone's experience will be different.

vioalas said:
I KEPT TELLING PEOPLE IT WAS THE DAMN ADHESIVE AND NO ONE LISTENED!!!!!! UGH! Rant over.
The white screens didn't come with enough glue, hence screen bleed, now the yellow screens have cured and look fine. GAH
Sorry... I ate pizza, and that makes me gassy, so I get explosive.
Click to expand...
Click to collapse
There was definitely something wrong with mine. I decided to go into AT&T today just to take a look at the One X's there and compare mine and out of the three on display there, and the two I saw yesterday at a different store where I bought mine, none had any yellow "spots". Now just so you know, my screen didn't have a "warm" display with a yellowish tint. Most of the display was bright white except for a small spot on the bottom right. It reminded me of the pictures of the iPhones that had the adhesive problem where there were noticeable "spots". I talked to the rep and was gonna wait to see if it would dry and go away since I only just bought the phone yesterday, but he said he would go to the back and get another white one and open it up to see if it was any better. The screen on that was perfect. A noticeable difference from the one with the "yellow spot". So, long story short, he swapped out my phone.
P.S. I understand what you are saying. The "warmer" looking screens are starting to get "cooler", but I honestly think my original one wasn't in that category per se. It was nice of the rep to let me swap it out. Depends on who you get I guess.

Related

Bottom separates from the screen? Pics Included.

Hi, Guys I have had this phone for a few days and I am loving it so far.
Today I noticed something very weird and I am a little concerned.
I was taking off my original HTC case and I saw that the bottom of the phone and the screen there was a big gap. I was shocked at first because I had never seen it before and I saw big led's on the bottom.
It Looks normal now but I can literally recreate it back if I push the bottom and the screen will separate from one another creating a big gap where I can actually see the led's. I mean once I push it back I have to recreate it for it to happen but other than that it looks normal and there is no light leakage once the push the bottom back on.
Here are the two pictures.
One where the bottom comes off if I push it a little and it could easily happen when I take off the case showing the gree led,
and the second one where I pushed the bottom back up and it looks normal.
https://www.box.com/s/05c56f37bdab763006a7
Yeah.. it probably shouldn't do that Might as well see about getting it replaced before your warranty is up.
Yea I sent amazon an email already, it is cool otherwise, If I don't push too hard or take the case off too hard it wont happen but it literally separates if I push little too hard. Otherwise normal usage it is fine and like now there is no light leakage or anything no one would be able to tell that happens unless they put pressure on the bottom edge.
Yep just took mine back for that same issue. I could pop the bottom of the LCD out from the housing and snap it back in. They exchanged it. Oddly enough my replacement I can still see a very slight gap but the screen doesn't move like it did on my other one. I'm worried about moisture getting in there. Might have to return this one as well
Sent from my HTC One X using XDA
Yea I am.just glad that it only happens when pushed. I already sent amazon an email and they are pretty good about advance replacement. I mean I would have never noticed it if I didn't push the case too hard to take it off from the bottom. Like now it is perfect lol.
Sent from my HTC One X using Tapatalk 2
i do believe this is how the access the innards of the phone. To reach the battery etc the screen pops off. It appears that yours was not properly fitted.
My AT&T One X started separating on the bottom left corner this weekend. I am going to call my local corp. store this morning and see if they have any in stock so I can go get a replacement.
..Gromet
Both my wife's and my phone do this as well. Noticed it a week ago, when taking off case.
It would be nice to know if this a defect or just the way most phones are. I mean it's perfect unless you push down hard to take off the case from the bottom.
Sent from my HTC One X using Tapatalk 2
When I had a Vivid, it did the same thing near the volume rocker. The border of the phone began separating from the screen. I just pushed in on it and it snapped back into place, but it's still a bit concerning.
I pop the case off of my One X every week to clean out debris, and I haven't noticed it separating yet. (official HTC case)
http://forum.xda-developers.com/showthread.php?t=1661644
I posted this last weekend about my phone doing the exact same thing, though I still havent gotten around to posting pictures. I am just going to refer to yours since they show the same thing. My is doing this on the sides rather than the top or bottom, but it is slowly spreading.
Annoyed because AT&T still doesnt have stock...
I was reading some of the international One X forums - it sounds like about 1 out of 4 have similar build issues on the intl' version. I was hoping they would have their ish together before the US release...
I ordered mine from amazon and they have already shipped me a replacement. I will update on how it goes. Hopefully not the same issue.
Sent from my HTC One X using Tapatalk 2
Exchanged mine for a new one today at the local corp. store. So far so good.
..Gromet
Sent from my HTC One X using Tapatalk 2
Gromet said:
Exchanged mine for a new one today at the local corp. store. So far so good.
Click to expand...
Click to collapse
Lucky! I called around and no stores in the area have them in stock.
Hmm...
The gap might be there due to constant handling/movement or swapping covers/cases. I mean, look at this youtube video regarding how the HTC One X can be taken apart for repairs. Notice how the phone is worked from that bottom edge, exposing the screen, before it snaps open. I don't currently have a HOX or else I'd test it first hand, but could this be a cause of the gap? or maybe it just a factory defect in some instances?
It could be. If my second one does that than I think it might be that way to open it up. Mine is fine right and looks new. But can snap it open with ease. If someone had given it to me like this I probably would not have known.
Sent from my HTC One X using Tapatalk 2
wangtang2k said:
The gap might be there due to constant handling/movement or swapping covers/cases. I mean, look at this youtube video regarding how the HTC One X can be taken apart for repairs. Notice how the phone is worked from that bottom edge, exposing the screen, before it snaps open. I don't currently have a HOX or else I'd test it first hand, but could this be a cause of the gap? or maybe it just a factory defect in some instances?
Click to expand...
Click to collapse
In that video it looks like the part she separates is the metal frame/bezel+screen from the polycarb shell. Our issue is the screen itself is coming unglued from the metal frame/bezel. It appears to be a quality control issue in a small percentage of them.
That video is very similar to how mine would come off. I would have to push really hard to open up like that but small bump does make it obvious how u would take it apart.
Sent from my HTC One X using Tapatalk 2
nkd said:
I ordered mine from amazon and they have already shipped me a replacement. I will update on how it goes. Hopefully not the same issue.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I had a gap in the bottom right corner where i could see some shiny material . The screen at that end was also slightly raised.
Asked amazon about it and they sent me a new one.
This one too is not perfect as there is still a slight gap between the body and the screen, again at the bottom right. But i guess i am going to keep this one.
waiting for my case.
OFFTOPIC : Why hasnt OP changed his launcher as yet! I feel the sense launcher looks less refined and spoils the beauty of the One X screen
Got the replacement phone, it doesn't do that. But damn this phone is all pink instead of white on the screen. I can clearly see the whites are not white on this phone. I am thinking about just keeping the original phone since it is always like new unless i force the housing to open. It never just happens, I have to make it happen, but other than that phone is like new and the screen is way more beautiful than the replacement phone. I think the one I got is using a different screen than the original.

screen loose ?

hi everyone, i have a quick question.
i noticed yesterday that my screen was starting to come loose on the top corner of my phone, i could push it back in and within 10 min it was back out. (this also happened on my htc inspire)
i returned the phone to at&t and my new one is more solid but i do notice that it does push in the bezel a tiny bit also on all corners and sides.
do i have another bad phone? is anyone else seeing this with there phone?
thx for the help
it flexes a bit with light pressure, but if the problem is severe or impedes the use of the phone, then return/exchange it.
my first phone was fine at first but then the right corner popped out about a 16th of an inch from the back case and the other side was fine. the phone was still fine to use though.
i am wondering if the tiny bit of flex around the edge is normal or if mine will eventually work loose again.
Mine is a bit creaky around the top and bottom but I dont think it is worth taking back for
I exchanged my first HOX because of this. It started in one corner and then quickly spread to three.
Sent from my HTC One X using xda premium
_MetalHead_ said:
I exchanged my first HOX because of this. It started in one corner and then quickly spread to three.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
how is the new one does the screen push in at all around the edges? my new one does slightly also do you mind letting me know what rev the build is. min is rev.2 on my box label.
thx
New one is rock solid. That rev2 is most likely just the packaging. The different hardware versions are HT23, HT24, etc... Mine is an HT24.
Sent from my HTC One X using xda premium
My HT 24 creaks a bit on the bottom, but I'm not going to worry about it.
gunnyman said:
My HT 24 creaks a bit on the bottom, but I'm not going to worry about it.
Click to expand...
Click to collapse
Same. I don't press hard enough for it to be an issue really.
Sent from my HTC One X using xda premium
Interesting, I just did a warranty exchange for the bottom of the screen popping away from the casing.
Sent from my HTC One X using Tapatalk 2
Ironically, this is how you take the phone apart.
gunnyman said:
Ironically, this is how you take the phone apart.
Click to expand...
Click to collapse
the screen is coming off the black metal bezel, don't you remove the bezel and screen as one piece when removing the back casing?
i guess if it does happen again i can just peel off the screen and glue it back down to the metal casing.
plastik46 said:
the screen is coming off the black metal bezel, don't you remove the bezel and screen as one piece when removing the back casing?
i guess if it does happen again i can just peel off the screen and glue it back down to the metal casing.
Click to expand...
Click to collapse
The one X is taken apart by popping the entire device out of the unibody plastic The screen is actually screwed down onto the phone
http://www.techrepublic.com/blog/cr...rnal-design-that-isnt-diy-repair-friendly/594
gunnyman said:
Ironically, this is how you take the phone apart.
Click to expand...
Click to collapse
If only I knew then what I know now...
You really wouldn't want to put glue on your phone .. I would make at&t take it back and give you a replacement
Sent from my Wcx infused HOX
_MetalHead_ said:
If only I knew then what I know now...
Click to expand...
Click to collapse
RIP Clicky...
gunnyman said:
The one X is taken apart by popping the entire device out of the unibody plastic The screen is actually screwed down onto the phone
http://www.techrepublic.com/blog/cr...rnal-design-that-isnt-diy-repair-friendly/594
Click to expand...
Click to collapse
actually the glass and the lcd are glued to the metal casing inside. the mainboards are screwed to the other side of the metal casing. as seen in the video.
http://www.youtube.com/watch?v=ceHw6mezG60
robertmoore208 said:
You really wouldn't want to put glue on your phone .. I would make at&t take it back and give you a replacement
Sent from my Wcx infused HOX
Click to expand...
Click to collapse
i'v done this to my old inspire already (same issue). you would do this if you replaced a broken screen. i fear if i return it to at&t again i will just get another unit with the same problems like before. i think alot of htc phones have this issue but most people are not as anal as i am and do not notice
gunnyman said:
RIP Clicky...
Click to expand...
Click to collapse
I'm actually very happy with my current HOX so it was all worth it lol
I guess there are many who have never had issues with the glass , or hell anything for that matter .. I'm included... You could take it back and give your replacement a good test while still in store , and if you glue your phone and something else happens to go wrong ... Good luck trying to explain that
Sent from my Wcx infused HOX

htc one s screen light leak?

Hey folks!
Today I got myself a one s, ics is amazing and the phone is super fast. I gotta say I'm not hugely keen on the plastic cover for sim access. Feels flimsy everytime I power the phone, these gripes I can live with.
But I'm really quite frustrated by light leakibg from where the screen meets the alu case at the bottom. Is anyone else experiencing this? It's along the entire bottom and cornrs. Quite noticeable.
It's the grey version and I was happy to get a s4. Purchased yesterday from Three UK, I know they are particularly funny with returns.
CurlyWatts said:
Hey folks!
Today I got myself a one s, ics is amazing and the phone is super fast. I gotta say I'm not hugely keen on the plastic cover for sim access. Feels flimsy everytime I power the phone, these gripes I can live with.
But I'm really quite frustrated by light leakibg from where the screen meets the alu case at the bottom. Is anyone else experiencing this? It's along the entire bottom and cornrs. Quite noticeable.
It's the grey version and I was happy to get a s4. Purchased yesterday from Three UK, I know they are particularly funny with returns.
Click to expand...
Click to collapse
I too have this. It doesn't bother me too much. You'll learn to live with it.
Sent from my HTC One S using Xparent Blue Tapatalk 2
Frustrating as it is I prob will learn to live with it, but I feel it spoils what could be brilliance otherwise.
I'm tempted to go look at the shop display model and ask some questions, as sad as that sounds.
invasion2 said:
I too have this. It doesn't bother me too much. You'll learn to live with it.
Sent from my HTC One S using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
CurlyWatts said:
Hey folks!
Today I got myself a one s, ics is amazing and the phone is super fast. I gotta say I'm not hugely keen on the plastic cover for sim access. Feels flimsy everytime I power the phone, these gripes I can live with.
But I'm really quite frustrated by light leakibg from where the screen meets the alu case at the bottom. Is anyone else experiencing this? It's along the entire bottom and cornrs. Quite noticeable.
It's the grey version and I was happy to get a s4. Purchased yesterday from Three UK, I know they are particularly funny with returns.
Click to expand...
Click to collapse
The plastic covers are necessary or else you would never get reception...
The light leakage may be part of the device, but there is a chance that it could also be a defect. Go back to the shop and see if the display unit has the same issue.
Ya it's probably a defect. Mine doesnt have and light leaking.
Sent from my HTC One S using xda premium
Guys please do not spam I have this too flow wolf made a video about this I don't have it
Sent from my HTC One S using xda premium
No light leaking here, I have the light blue one.
T-MobileUS HTC One S running Stock Rooted 2.21.
I've got it too. The litle bit of light you see just above the capacitive buttons. Not bothering me at all as I only ever see it when I'm using it in a room that's pitch black
dont have this issue in my one s S/N SH23XW
mayb its a particular product line defect.
Took the handset back, best solution was to buy the Samsung S3, hugely impressed with it.
I do have that light aswell but I just notice at nights
Enviado desde mi HTC One S usando Tapatalk 2
CurlyWatts said:
Took the handset back, best solution was to buy the Samsung S3, hugely impressed with it.
Click to expand...
Click to collapse
Yeah, the plastic, iPhone looking build with the big home "button" and backwards back capacitive button placement is pretty impressive not to mention touchwiz.
Sent from my HTC One S using Xparent SkyBlue Tapatalk 2
I had this, a quick trip back to the store and they replaced it, new handset had 0 issues and the rubber grommet around the glass seemed to be placed better.
---------- Post added at 11:24 PM ---------- Previous post was at 11:23 PM ----------
sharpinator said:
I've got it too. The litle bit of light you see just above the capacitive buttons. Not bothering me at all as I only ever see it when I'm using it in a room that's pitch black
Click to expand...
Click to collapse
He was referring to light leak along the underside of the glass at the bottom, not leaking light upwards from the capacitive buttons (which is indeed normal)
what' the cause of the light leakage?
anybody knows?

Screen level

Hi all
Haven't noticed any issues with my One XL until tonight and want to know if this is normal or if I should exchange as I am within 30 days.
When I push down on the left bottom, right bottom, and right top corners of the screen there is no play/movement. When I push down on the left top corner, there is a definite give. Is this normal?
Sent from my HTC One X using Tapatalk 2
I've had my One X for 3 days. No play on the screen, but I noticed today there is a crack or scratch in the LCD under the glass. I don't know how else to describe it, it looks just like a scratch, but I can see the glass is smooth and glossy at that place. At first I thought it was dead pixels, but it changes color based on angle. I was really hoping for HTCs flagship phone to last me at least a week without defects.
Sent from my HTC One X
quarlow said:
I've had my One X for 3 days. No play on the screen, but I noticed today there is a crack or scratch in the LCD under the glass. I don't know how else to describe it, it looks just like a scratch, but I can see the glass is smooth and glossy at that place. At first I thought it was dead pixels, but it changes color based on angle. I was really hoping for HTCs flagship phone to last me at least a week without defects.
Sent from my HTC One X
Click to expand...
Click to collapse
Exchange it?
Sent from my HTC One X using Tapatalk 2
cfn87 said:
Hi all
Haven't noticed any issues with my One XL until tonight and want to know if this is normal or if I should exchange as I am within 30 days.
When I push down on the left bottom, right bottom, and right top corners of the screen there is no play/movement. When I push down on the left top corner, there is a definite give. Is this normal?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Mine does it in the too right corner.. but it takes pressure. So you won't really notice it. I think I pressed mine a little too hard and it might have popped back in. I don't recommend it though
Sent from my One X using xda app-developers app
I will have to try to exchange it. But, I only got it after receiving two doa replacement GS IIs. Plus the phone is awful if it comes with 2.2 pre-installed. I don't know if I want to roll the dice and risk getting one with 2.2 on it.
And I spoke too soon, mine does have play on the screen in the center at the top, right on the at&t logo.
Not too impressed with HTC build quality so far.
Sent from my TouchPad
quarlow said:
I will have to try to exchange it. But, I only got it after receiving two doa replacement GS IIs. Plus the phone is awful if it comes with 2.2 pre-installed. I don't know if I want to roll the dice and risk getting one with 2.2 on it.
And I spoke too soon, mine does have play on the screen in the center at the top, right on the at&t logo.
Not too impressed with HTC build quality so far.
Sent from my TouchPad
Click to expand...
Click to collapse
Lol "is awful" if it comes with 2.2. Don't know entirely about that.
I have actually been impressed with the build quality. But, something under the screen as you say sounds like an anamoly. You need to get that replaced.
Sent from my HTC One X using Tapatalk 2
Just took a further look at my screen. It looks like the top left part of the screen is raised ever so slightly above the tiny screen bezel around the screen. All the other parts of the screen are flush with that small bezel. Does this make sense?
Sent from my HTC One X using Tapatalk 2
I think this is going to be very common with the one x's because of its unibody shell. The indented snaps that hold the phone inside the unibody go along the top bottom and both sides. HTC should of also had the snaps in the corners which would have eliminated the issue.
Yeah it's not a big deal. I might exchange it once, but other than that I'm not about to go OCD like some people here.
absolutelygrim said:
Mine does it in the too right corner.. but it takes pressure. So you won't really notice it. I think I pressed mine a little too hard and it might have popped back in. I don't recommend it though
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Mine does this in the bottom left hand corner. It makes the screen have a faint orange circle in that corner unless I apply pressure on that corner and it will fade for a few minutes before coming back. I've been debating whether I should bring mine in for a replacement but I'm worried I'll get stuck with 2.2
Sent from my One X using xda app-developers app

White One X Wearing Off?

Hey,
For all of you that own a white HOX, have you experienced the matte white finish on the back of the device gradually wearing away near the bottom corners (or wherever you most often hold it from) and losing its characteristic grippy matte-ness, becoming slightly shiny and smooth?
I'm concerned about the long term consequences of using the HOX without a case (although i use a case) as the bottom right area of my phone has lost some of its matte texture, become smooth white.
I don't have a problem with the white finish on mine. The only problem I have is the SN, IMEI, and SKU sticker coming off from sliding it in and out of my pocket.
Sent from my One X using xda app-developers app
Hydromea said:
Hey,
For all of you that own a white HOX, have you experienced the matte white finish on the back of the device gradually wearing away near the bottom corners (or wherever you most often hold it from) and losing its characteristic grippy matte-ness, becoming slightly shiny and smooth?
I'm concerned about the long term consequences of using the HOX without a case (although i use a case) as the bottom right area of my phone has lost some of its matte texture, become smooth white.
Click to expand...
Click to collapse
How long have you had it? I've had mine for 2-3 months and so far it's okay. There might be a little shininess going on, but it's hard to tell.
Myrder said:
I don't have a problem with the white finish on mine. The only problem I have is the SN, IMEI, and SKU sticker coming off from sliding it in and out of my pocket.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
I yanked mine off
Sent from my One X using Tapatalk 2
InflatedTitan said:
I yanked mine off
Sent from my One X using Tapatalk 2
Click to expand...
Click to collapse
+1 hahaha it kept coming off so I said screw it
Sent from my HTC One XL using xda app-developers app
I don't have that problem. I mean, I have the glamour grey one, but I digress...
Does anyone have a problem with the screen flaking? I guess it's the anti glare coating on the beveled edge for me is flaking off. I can't understand it because it's been in a case the entire time i've had it. Of course I can't call up warranty since i've rooted and unlocked my bootloader. This sort of software modding thing though shouldn't void a defect warranty.
Valohtar said:
How long have you had it? I've had mine for 2-3 months and so far it's okay. There might be a little shininess going on, but it's hard to tell.
Click to expand...
Click to collapse
I've had mine since around the beginning of April. As of right now, the wearing away has been pretty minor, and is distinctly noticeable in direct light, and appears around the bottom edge, near the corners, as that is where I most commonly hold my phone from.
I actually have a case on right now, but noticing this slight wear-away concerned me (which further convinced me to keep a case on), but wasn't sure whether or not it would keep wearing away.
I would describe it as... a smoothing out of the matte finish, kind of the way it looks if it gets a little oily. The affected areas are more reflective and 'shiny' , but not truly smooth like the finish on the GS3
Again, it's not major, but just something I was wondering about.
This is common in plastic items if you look at a well used mouse or keyboard over time the most struck areas will smooth out lucky the hox is mad of inject molded plastic so the white one is solid white so it wont "rub" off it will just show polish like brass over time.
My grey one did that after about 2 months. Two spots about the size of a dime on the back, where it would touch when set down. They polished to a shiny slippery finish. Haven't used a case at all.
Sent from my Note II
Yeah, mines getting shiny on the corners, and my screen has some barely perceptible scratches on it. I'm not too worried at the moment though, I'm going to warranty swap due to a bright spot on my screen.
Myrder said:
I don't have a problem with the white finish on mine. The only problem I have is the SN, IMEI, and SKU sticker coming off from sliding it in and out of my pocket.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
You shouldn't need to keep that on your phone anyway. You should have received at least one or two extra stickers in the packaging that came with the phone, which are there to be used for warranty purposes etc...
Sent from my One XL using XDA Premium
My phone tends to get a kind of shiny/smooth finish to it after a while. Its nothing a little bit of windex can't fix. I do have a case on it
Sent from my One X using xda app-developers app

Categories

Resources