Hi, I tried to follow the instructions od multiboot installation of the post titled '[DEV][2012/04/13] Multiboot v0.5.5' , but unfortunately after step 7, I don't see any menu and start the CM7 logo on loop.
I've created 2 folder named CM9 and MIUI with the 3 img files. They was been created with MultiBootManagerFree.
I've actually installed CM7.2 nightly 2012.04.20....
I don't understand what could be my error. Any council??
Regards to everyone who wanna help me!!
Marco
P.S. Here down the followed instruction:
1. Open Stable recovery flash CM7/CM9 (preferably froyo kernel).
2. Now boot into CM7/CM9 verify your primary system is running fine .
3. Find the fsimages attached in first post . Extract it under
/sdcard/multiboot/<your virtual system name> (eg. /sdcard/multiboot/CM7.2)
4. Boot into recovery again (Either of Latest / Stable).
5. Flash bootmenu v0.5.1 and reboot
6. When blue LED flashes press down volume rocker .
7. In boot menu select 2nd boot .
8. When you select 2nd boot , your menu should appear something like this
CM7.2
MIUI
Codename
Boot from Nand (Real system)
Recovery (CWM)
Reboot
9. Now select CWM .It would now show all virtual images But not the Recovery (CWM) string anymore. Smething like this
CM7.2
MIUI
Codename
But now you wont see any nand boot (Real system) or reboot string anymore.
10.Select anyone of those. But before that be sure you have copied all of the fsimages under /sdcard/multiboot/<your virtual system> ( as mentioned in step 3).You would get a long pause . As if phone has stopped responding . But actually your phone is jus fine .Its just creating the file system images. Dont PANIC!!
11. Now after long pause when the image files have been created . you would see your lovely recovery . Now this is the recovery you have been love in with .
12. Flash your virtual system zip selecting zip from sdcard (MIUI , Codename , CM7 whatever).
13.After flashing has been completed reboot and go to bootmenu .
14. Go to 2nd boot You would see now CM7.2 in menu.Select it and you would be inside CM7.2 !!!!!!!!
Note : Before trying all this make sure you have put the default boot as 2nd-System ( If you are using Multiboot version greater than 0.5.2 alongwith bootmenu 1.1.8) . If not then default boot should be 2nd-Boot.
No one who can help me!?!
Related
just wanna share
custom boot image for stock GINGERBREAD 2.3.4 XXKPJ galaxy mini
DOWNLOAD HERE
how to:
1. u must be in stock GINGERBREAD 2.3.4 XXKPJ
2. flash Enhanced Recovery by tj_style with odin
3. Place 4_BOOT_XXKPJ_DT_ROOT.zip at the root of sdcard
4. Boot to recovery mode (hold the power and home button together)
5. apply update from sd card
6. choose 4_BOOT_XXKPJ_DT_ROOT.zip
7. finish, reboot
features :
1. pre-rooted
2. a2sd darktremor (just partition ur sdcard then activate in a2sdgui)
3. support init.d (script that run when booting)
4. addition on /system/app/
- SuperUser.apk,
- A2SDGUI.apk
- DSP Manager.apk (Sound Management like in CM7)
- SpareParts.apk
5. added Juwe RAM Script
6. edited file /system/etc/hosts/ (contain ads blocker)
**credits to Remoeg
instead of custom recovery can we flash CWM recovery and then Place 4_BOOT_XXKPJ_DT_ROOT.zip at the root of sdcard n apply update from sd card.?????
loveablekrish said:
instead of custom recovery can we flash CWM recovery and then Place 4_BOOT_XXKPJ_DT_ROOT.zip at the root of sdcard n apply update from sd card.?????
Click to expand...
Click to collapse
yes, mount /system first.
my GF has Gmini n wanna try GB rom...is it fully work all?or have lil bugs? thanks in advance brow
what is the password?pls
pw: samfirmware.com
thanks for the reply
Hello Dear Friend
Please Help Me
my tablet pc is superpad II after boot , automatically Goes to
"touch crosshair to calibrate" and Touch Screen Does not work
my android is :
hotfile.com/dl/124480279/41152b2/superpad9V1_0719-1.zip.html
Screen Completely black , Please help for fix Problem !
Thank you very much
Hi、iam just newbie here
i want to flash merruk kernel but i not know how to do it
Anyone can give me a.tutorial please?flashing kernel via odin
thanks:beer:
Model:Galaxy Y
Custom ROM:Tigra v4
Kernel;Dual Tigra 3
Base Version;DXLA1
Download the following and place to the Root Of SD card
CWM
KernelUpdate.zip
Ext4
MerrukTechnology v2.0 Pre-Final(boot.img ONLY)
System 1.0.8
(Note : For system 1.0.8 it contains "system" folder, extract that folder and place in root of SD card)
Now we are all set
1. Turn off phone and boot into CWM
(Note: To boot into CWM press Vol Up, Home, and Power at the same time and in the stock recovery choose update from zip and select the CWM.zip)
2. Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
(Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
3. After successful kernel up press power to return to CWM
4. Press Reboot now, and your kernel is updated
5. Reboot twice and it will automatically delete the system folder in SD card
ext4 is optional:
6. Repeat step 1 and select install from zip, this time choose the Ext4.zip
7. Press power to return to CWM and Press Reboot now
hi there,
i know you are experiencing issues with your SGY but please post in the right place,
here:http://forum.xda-developers.com/showthread.php?t=1675474&page=10
im sure if you post there senior members and recognized contributors will get on your issue right away
this is a development related thread,
thank you
Hi people, here is a short instruction if you have a P or L version of the I8160 and want to update this (great) old phone. credits to xdas-e
for a while i thought that roms didnt work on the P version, because when installing roms i got the error that the rom was only for I8160, not I8160P. so yeah it is possible, maybe this is common knowledge, but i couldnt find out how before i found this information.
I have not tested this exhaustively but i believe they all should work, because i believe the only difference from the P version is that it has an NFC module.
]------- modify the rom for P version:
1.- Get the custom ROM.
2.- Get the /system/lib/tee folder contents from your GT-I8160P JB installation (from stock rom). You may need root access, although in my case I could simply move trough the hidden directories and copy the folder to my sd card.
3.- Swap the /system/lib/tee folder, and put what you got from step 2, into the zip file of step 1, same place, same everything. You may very well dispose the original /system/lib/tee folder in the zip file.
4.- Change /system/build.prop and introduce a P in every GT-I8160 entry (from GT-I8160 to GT-I8160P).
5.- (tricky one) look for the updater script file within the custom ROM zip file, and delete (or add a P) the first complete entry of the assert command (you shall see some GT-I8160 there). in my case it was located under META-INF\com\google\android\.
------- from here you have successfully modified the rom for the P version, these steps just show the installation:
6.- If you dont already have CWM, get yourself one (I used this one [JB] CWM Recovery 6).
7.- Put both zip files into your sd card; get a copy also of gapps (google apps, play store etc) for the android version of the rom.
8.- Back up all your data.
9.- Swicht off your phone and restart in recovery mode (up volume, home and power buttons pressed simultaneously).
10.- Load from the external sd card the CWM zip file.
11.- Make a full ROM backup to restore if things go wrong. Wipe data/factory reset; wipe cache partition; wipe dalvik cache (under advance options), format /system if needed (see rom instructions).
12.- Install from external sd card: a) custom CM rom; and b) gapps if you're for it.
13.- Restart.
14.- You shall be done!!! (first boot takes a long time)
good luck! my phone was crap with stock and now it works great, so basically it saved me from buying a new phone.. a big thanks to all the rom developers for this device .
For all those who get a boot-loop after installing custom themes of CM.
Cause : This is generally caused by custom bootanimations that are installed with the theme.
Fix :
1. Go to Recovery Mode.
2. Mount System.
3. Go to Advanced.
4. Go to File Manager. (Applicable for most of TWRP recovery versions).
5. Locate : /data/system/themes folder.
6. Select and Delete Bootanimation.zip file and reboot the phone.
Your phone will reboot just fine, with the system default bootanimation.
Hit Thanks if I helped.
Regards,
Ahmed.
******TWRP 3.1.0 FOR M10 CHINAPHONE******
---------------------------------------------------------------------------
DISCLAIMER : this is an unnoficial build created by myself Tested and confirmed working
NOT WORKING : MTP
THIS IS FOR EXT4 ONLY IF YOU NEED UBIFS OR YAFFS2 RECOVERY COMMENT HERE I WILL BUILD YOU ONE AGAIN EXT4 ONLY...
_______________________________________________
NOTICE : take a firmware backup before flashing
Anything to your device though this recovery is
Confirmed working you should always back your original firmware up, This recovery does NOT come with a Scatter.file included to stop bricking with incompatible device partitions
--------------------------------------------------------------------------
1. Unzip the recovery from the .zip.
2. Open SP Flash tool.
3.set your DA AGENT to all in one MTK DA.
4.load your scatter.file into the Flash tool.
5.wait for your scatter to load your files.
6.unselect all files for flash but recovery.
7.load twrp_3.1 into recovery slot.
7.1 flash my patched boot.img below also.
8.MAKE SURE DOWNLOAD ONLY is set DO NOT use format all + download.
9. Click start button
10. Connect to pc with usb cord.
12. wait for flash to complete.
13. Unplug & take out & insert your battery.
14. Hold power & volume up until the first screen appears and release, TWRP will now load.
15. Swipe to allow modifications.
Thats it Happy Flashing dont forget the thanks button & enjoy
---------------------------------------------------------------------------
If you need help please dont be afraid to ask here im here to help, if it does not boot on your device your board is different in which case you will need to attach your boot.img & recovery.img in a post so i can download and create a compatible twrp for your device.
_____________________________________________
LINKS :
TWRP 3.1.0
https://drive.google.com/file/d/1yhFWmbTUQLFvJCGZnUX20oF-f6TTEBaX/view?usp=drivesdk
Patched Boot.img : will be up later
Removed the following.
*SB.CHK
*Encrypted footers on userdata from :
*fstab
*fstab.fat
* fstab.fat.nand,
*adjusted kernel slightly this will not affect the operation of the system or operation of it.