Related
STOCK ROM IMAGES BLU DASH 5.0 D410a V27-GENERIC Android Kitkat 4.4.2 MT6572 Chipset (no UBIFS)
PLEASE READ THE INSTRUCTIONS BEFORE FLASHING YOUR PHONE SO THAT YOU WON'T BRICK IT.
EDIT: 14 January 2015. Updated the TWRP 2.8.2.0 download link. Fixed the problem where ADB and MTP was not functioning in TWRP. Added backup support for a few other partitions including the Baseband.
EDIT: 19 January 2015. Changed method of rooting and added flashable zip with modified kernel to add init.d support (that was tested and is functioning properly.)
STEP 1
BACKUP YOUR MEDIATEK DEVICE
Prerequisites
All of the software is for Windows.
Download and Extract the MTK USB Drivers and the SP Flash Tool found closest to the top of the list at:
http://mtk2000.ucoz.ru/
Press the play button to the right of the file to start the download.
Download MTK Droid Root & Tools
Latest version can be found by following the link of the following post.
http://forum.xda-developers.com/showpost.php?p=38320254&postcount=1
Hint: Click the show content button to see the link to another forum with the download link
Direct Download Link of MTK Droid Root & Tools if you are having problems getting the link.
http://depositfiles.com/files/ne1gnposp
You will need Winrar to extract the files.
That can be downloaded from: http://www.rarlab.com/download.htm
READ HERE ON HOW TO BACKUP: http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Thanks to @rua1 for the instructions and software.
NOTE: I WOULD RECOMMEND BACKUPING UP THE USRDATA PARTITION AS WELL TO DO THAT USE HEX "0X96B40000" AS THE LENGTH DURING READ BACK IN SP FLASH TOOL
To flash the DASH 5.0 you need to use the Preloader to do it.
STEP 2
Installing the Preloader Driver (READ this section entirely before trying)
Open Device Manager
Start -> Run
Type:
Code:
devmgmt.msc
Press Enter
Turn off the phone until it is completely shut down with nothing plugged in the USB port. You will see the screen go black and shortly afterwards it will vibrate.
With Device Manager open, connect the USB cable to the phone without turning it on.
You will see the MT65XX Preloader appear (see image)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quickly double click MT65XX Preloader before it disappears, if it disappered, just unplug and plug back in the cable and try again.
Under the Driver tab, click Update Driver, click Browse my computer for driver software.
Using the Browse button find the MTKUSBAll folder you extracted and click on "New inst. win 7&8x64" and click OK
Click Next
If you get the message "Windows can't verify the publisher of this driver software", just click "Install this driver software anyway"
Click Close
Click Close
After the driver is installed you can unplug the phone.
STEP 3
Uploading the image files to the phone{/B}
WARNING: The BLU-DASH-5.0_141022_BLU-D410a-V27-GENERIC_FOR_SP_FLASH_TOOL.zip file has all of the necessary images but do not flash them unless you trying to recover from a brick.
DO NOT FLASH THE PRELOADER.BIN AS IT MAY BRICK YOUR PHONE.
THE ONLY FILES I HAVE PERSONALLY TESTED ARE boot.img, factory_NONmodified_recovery.img and system.img
Download BLU-DASH-5.0_141022_BLU-D410a-V27-GENERIC_FOR_SP_FLASH_TOOL.zip from here:
http://d-h.st/3L9G
See Step 5
Extract the SP Flash Tool.
Extract the system.img and MT6572_Android_scatter.txt (and/or boot.img and factory_NONmodified_recovery.img, if you wish)
Open the SP Flash Tool
Click the Download tab
Click the Scatter-loading button and select the MT6572_Android_scatter.txt file.
Click the location of ONLY the parition(s) you are going to flash: ANDROID = SYTEM partition (system.img), BOOTIMG = KERNEL (boot.img) and RECOVERY=RECOVERY (factory_NONmodified_recovery.img or custom recovery file)
Select the image file (e.g. system.img or system_rooted.img)
MAKE SURE ALL OTHERS ARE NOT TICKED
Click the Download button.
Plug in the phone or unplug and plug it back in to start flashing the images to the phone.
Note: This can also be done with the battery removed.
Your phone will have root.
STEP 4 - Adding TWRP
First we need to rename the file recovery-from-boot.p found in the /system folder.
Using a File Manager with root permissions rename
Code:
recovery-from-boot.p
to
Code:
recovery-from-boot.bak
OR
From an adb shell, rename the file
Code:
su
cd /system
mv recovery-from-boot.p recovery-from-boot.bak
Now turn off the phone and with SP Flash Tool flash TWRP 2.8.2.0. Download link below.
NOTE: Select only the RECOVERY partition to flash. TWRP themes are supported as well as the Aroma File Manager.
http://d-h.st/aQmt
STEP 5 - Rooting and adding init.d support
Go to http://download.chainfire.eu/supersu
Download the latest SuperSU.
Go to http://d-h.st/AJQ
Download the init.d support zip file.
Boot to TWRP while connected to a PC with adb tools run the command
Code:
adb reboot recovery[/url]
OR
Hold down the power select Reboot and hold down the volume up button until you see the TWRP logo.
Via the install menu, flash the SuperSU zip and inti.d support zip.
ALL DONE!
THANKS:
[user=631273]@Chainfire[/user] for SuperSU
[user=5119815]@rua1[/user] for MTK Droid Root & Tools and instructions on how to use SP Tools
[user=4478781]@yuweng[/user] for creating the tool to make TWRP for MediaTek devices
[user=912474]@Dees_Troy[/user] for TWRP
I will give a brief explanatoin and will elaborate more when I have the time.
For Root:
Thanks to @Chainfire
I basically mounted the system.img in a Linux OS and copied the files from the SuperSU v2.36 zip file and placed them in their relevant directories added the relevant permissions, etc.
For init.d scripts
Thanks to @alireza7991
See his thread: http://forum.xda-developers.com/showthread.php?t=2287540
I modified the kernel to boot and created a flashable zip that adds busybox to /system/xbin and creates the necessary folders then flashes the modified kernel.
For TWRP:
Thanks to @yuweng
I used Easy Magic TWRP Installer for MTK. See http://forum.xda-developers.com/showthread.php?p=53752834#post53752834
It worked but changed my partition information for some reason even though the size fit my paritition size. I wiped my phone and lost my baseband and recovered it. Posted a new thread on how to do that. See http://forum.xda-developers.com/android/software-hacking/restore-baseband-mt65xx-devices-t2967949
That is why I posted the image file so no one has to face that problem too. I tested it and it is functioning without any problems.
You can follow yuweng's thread to make it smaller if your partition size is smaller than 6MB for some phones, at a cost of course.
Anyone looking for baseband files can check http://forum.xda-developers.com/android/software-hacking/restore-baseband-mt65xx-devices-t2967949
For anyone wanting to use Link2SD on this, I have created a flashable zip to use with a custom recoveery that adds init.d support, installs Link2SD as a system app and adds a modified mount script that functions properly.
Requires root and a SD card with the second partition formatted as EXT4.
Download -> http://d-h.st/Dcgh
After flash this rom only get Blu screen, wipe and cache reset and the same, trun to V14 again and power on ok, this v 27 in the 2 variants, stock and rroted not start.
jorgefar said:
After flash this rom only get Blu screen, wipe and cache reset and the same, trun to V14 again and power on ok, this v 27 in the 2 variants, stock and rroted not start.
Click to expand...
Click to collapse
What procedure did you use to flash it?
SP_Flash_Tool_exe_windows_v5.1420.00
Scatter File from V27
selected only:
Recovery: non modified...
Boot: boot.img
Android : System.img or System Rooted
Flashed OK
Only Blu screen and restar...
Im currently on V14 Ok
jorgefar said:
SP_Flash_Tool_exe_windows_v5.1420.00
Scatter File from V27
selected only:
Recovery: non modified...
Boot: boot.img
Android : System.img or System Rooted
Flashed OK
Only Blu screen and restar...
Im currently on V14 Ok
Click to expand...
Click to collapse
Your phone is a BLU Dash 5.0 D410a and NOT the 5.0+ or 5.0 Studio right?
It sounds like your kernel (boot.img) is not booting the /system partition. Try flashing the /system and recovery partitions only for now and see what happens. Do not flash the boot.img
Thanks for you le answer! Thats right, is a Blu Dash 5.0 D410a, I try on Monday the suggested and post results!!!
Hi again, flashed system and recovery only, stuck on Blu screen again, try wipe and reset cache, stuck on screen Blu,any recomendation??
Added a flashable zip to add init.d and install LInk2SD with a modified mount script to run properly on this phone, BLU DASH 5.0 D420a running V27 Android 4.4.2.
See post #3
dechronic said:
Your phone is a BLU Dash 5.0 D410a and NOT the 5.0+ or 5.0 Studio right?
It sounds like your kernel (boot.img) is not booting the /system partition. Try flashing the /system and recovery partitions only for now and see what happens. Do not flash the boot.img
Click to expand...
Click to collapse
I'm having the same problem as Jorgefar. Mine is on v24 instead of v14 though after the factory update to 4.4.2. I rooted it with kingroot, but I would like to have twrp recovery. I've done everything you instructed him, but mine gets stuck in the bootloop as well. I thought i could just flash the recovery, and did the rename on the recovery file, but that didn't work still had factory recovery. After that I did the entire procedure and got the bootloop.
Sexyr said:
I'm having the same problem as Jorgefar. Mine is on v24 instead of v14 though after the factory update to 4.4.2. I rooted it with kingroot, but I would like to have twrp recovery. I've done everything you instructed him, but mine gets stuck in the bootloop as well. I thought i could just flash the recovery, and did the rename on the recovery file, but that didn't work still had factory recovery. After that I did the entire procedure and got the bootloop.
Click to expand...
Click to collapse
After installing TWRP you need boot into TWRP before booting into Android and install the latest SuperSU. The install-recovery.sh will replace TWRP with the stock recovery on the first boot if SuperSU is not installed, which renames it.
After flashing TWRP with the Smart Phone Flash Tool, disconnect the cable, press the power button and then hold the volume up button to enter TWRP.
dechronic said:
After installing TWRP you need boot into TWRP before booting into Android and install the latest SuperSU. The install-recovery.sh will replace TWRP with the stock recovery on the first boot if SuperSU is not installed, which renames it.
After flashing TWRP with the Smart Phone Flash Tool, disconnect the cable, press the power button and then hold the volume up button to enter TWRP.
Click to expand...
Click to collapse
Cool got it and am on v27 now. thanks..... now if ony there were other roms for it ah well, at least i'm rooted again with recovery.
can i flash this on BLU Dash 5.0 D400a
dechronic said:
Anyone looking for baseband files can check http://forum.xda-developers.com/android/software-hacking/restore-baseband-mt65xx-devices-t2967949
For anyone wanting to use Link2SD on this, I have created a flashable zip to use with a custom recoveery that adds init.d support, installs Link2SD as a system app and adds a modified mount script that functions properly.
Requires root and a SD card with the second partition formatted as EXT4.
Download -> http://d-h.st/Dcgh
Click to expand...
Click to collapse
This say file no longer available..could it be downloaded elsewhere?
Does this work on 5.0+?
Stiffymeister said:
Does this work on 5.0+?
Click to expand...
Click to collapse
Don't think so but I think I have a 5.0+ image. Anything in particular you looking for? I should be able to provide it tomorrow
i have tried everything as you said but after using the flash too and b4 installing recovery it says my phone is not rooted so it wont let me rename the recovery file. should i have a rooted system image in the scatter file cause i dont see one in the files i extracted. p.s. i downloaded all the files you linked so if im missing something can someone please point me in the right direction. thanks
blu dash 5.0 d410a v27
dlongnasty said:
i have tried everything as you said but after using the flash too and b4 installing recovery it says my phone is not rooted so it wont let me rename the recovery file. should i have a rooted system image in the scatter file cause i dont see one in the files i extracted. p.s. i downloaded all the files you linked so if im missing something can someone please point me in the right direction. thanks
blu dash 5.0 d410a v27
Click to expand...
Click to collapse
I probably need to redo the steps for a couple of the posts.
Download the TWRP at http://d-h.st/aQmt
Upload it to the phone. Make sure that only recovery is ticked in the Smart Phone Flash Tool (SP Flash Tool) and select the file you downloaded. You should be able to figure out the rest based on my instructions.
Flash SuperSU which can be downloaded from http://download.chainfire.eu/supersu
It will rename the file that would put back the original recovery.
That should be it.
got it working thanks. are their any custom roms for the d410a?
Hello,
I have successfully installed TWRP and a custom ROM on a UHANS A101S. And now I want to share the files and instructions, because they come from Russian forum 4pda.ru (thanks and credits to them).
Warning: I do not take any responsibility for whatever outcome you have when trying this on your device. It worked for me, but everything you do is your own risk.
Now, here's how it worked for me:
(Instructions are for UHANS A101S only, NOT for A101)
Installation of TWRP:
1. Download TWRP recovery image for UHANS A101S. Check that you get the correct recovery.img for your firmware build. Also download the scatter file for the UHANS A101S.
2. Download SP Flash Tool and driver for UHANS A101S.
3. Install driver on your PC and reboot your PC.
4. Unpack SP Flash Tool. Unpack scatter file. Put scatter file in same folder as recovery.img file.
5. On your phone, enable USB debugging mode in developer settings. (To activate developer settings menu, tap 7 times on your build number in Settings > About).
6. Switch off phone. Remove battery. Wait for 10 seconds. Put battery back into your phone, but don't start it! Keep it switched off.
7. Start SP Flash Tool with Admin permission. Click "scatter-loading" and navigate to the folder where you unpacked the scatter file and select it. Make sure that "Download Only" is selected in drop-down menu on the left. Then click the "Download" button in SP Flash Tool.
8. Connect your phone to the USB port of your PC and press Volume Up on your phone, so SP Flash Tool will recognize it.
9. If everything goes fine, in SP Flash Tool a red progress bar at the bottom turns yellow, then green and finally you get a pop-up with a green check mark.
10. Now you can boot into TWRP. To do so, unplug phone from PC and press Power On and Volume Up simultaneously.
Download links for installing custom recovery TWRP for UHANS A101S:
Download from Mediafire
(For the recovery.img file, choose DRV.TEST version if you see this appendix in your firmware version. Otherwise, option v3.05 is correct).
If you want to restore stock recovery, recovery image from firmware version 3.05 is available too.
To install custom ROM, download your preferred ROM, copy it to your phone and flash from within TWRP.
Custom ROMs for UHANS A101S:
CLEAN MOD (Stock ROM without bloat)
MOKEE ROM (Gapps: no, root: no)
Resurrection Remix 5.7.4 (Gapps: no, root: yes)
To get Google Play store, flash Gapps package.
Download Gapps package here (choose ARM and Android 6.0):
http://opengapps.org
(Pico or Nano package recommended).
If you want root access and if it's not included in the ROM, you can flash SuperSU Zip using TWRP:
SR2-SuperSU-v2.79-SR2-20170103215521.zip
Stock ROM from UHANS (via SP Flash Tool):
https://mega.nz/#F!lX5BGKJS!pVksNANFfS2R8Jrpy6O1XQ
Source: http://www.uhans.cc/Service/index
A new custom rom
Hey guy! Thanks for your ROMs, I have Uhans A101S and they worked properly but I wanted to try something else with a google stock experience and so I wanna ask you if you can create another custom ROM (like lineage os) for this device.
Thanks a lot!
******TWRP 3.1 FOR TCL 5044 all variants******
---------------------------------------------------------------------------
DISCLAIMER : this is an unnoficial build created by myself Tested and confirmed working, i used magisk V18 as test.zip and is now rooted with magisk, there will be bugs comment here any issues you find & i will fix them asap,
UPDATE : 26th Jan 2019 : WORKING
* SD card mount now added
*OTG fixed
* terminal now works within TWRP no more child process exited error,
* sideload is functional
NOT WORKING : MTP
---------------------------------------------------------------------------
CHIP VERSION
---------------------------------------------------------------------------
Compatible chip type: FSTYPE
MEDIATEK : MT6737M EMMC
MEDIATEK : MT6735M EMMC
---------------------------------------------------------------------------
NOTICE : take a firmware backup before flashing
Anything to your device though this recovery is
Confirmed working you should always back your original firmware up, This recovery does NOT come with a Scatter.file included to stop bricking with incompatible device partitions, should you require it please ask in the comments.
--------------------------------------------------------------------------
0. make sure OEM unlock is ON in the developer options before doing anything.
1. Unzip the recovery from the .zip.
2. Open SP Flash tool.
3.set your DA AGENT to all in one MTK DA.
4.load your scatter.file into the Flash tool.
5.wait for your scatter to load your files.
6.unselect all files for flash but recovery.
7.load twrp_3.1 into recovery slot.
7.1 if you have 5044T flash my patched boot.img below also.
8.MAKE SURE DOWNLOAD ONLY is set DO NOT use format all + download.
9. Click start download.
10. Remove battery from phone.
11. Connect to pc with usb cord.
12. wait for flash to complete.
13. Unplug & insert your battery.
14. Hold power & volume up until the first screen appears and release, TWRP will now load.
15. Swipe to allow modifications.
16. Tap wipe.
17. Tap format & type yes then press ok
18. Reboot recovery once complete,
19. You can now root your device or flash what you need to.
20. Hit the thanks button here on XDA i spent hours upon hours building this for everyone once you reboot after formatting the data partition it will take roughly 5 minutes for your 5044 to boot.
---------------------------------------------------------------------------
If you need help please dont be afraid to ask here im here to help, if it does not boot on your device your board is different in which case you will need to attach your boot.img & recovery.img in a post so i can download and create a compatible twrp for your device.
_____________________________________________
LINKS :
TWRP 3.1.0 updated 26th Jan 2019
https://drive.google.com/file/d/1hi19OtPeVqSpe3c6VyRu8XusBcCpmai0/view?usp=drivesdk
PATCHED BOOT.IMG (no dm-verity) 5044T ONLY
https://drive.google.com/file/d/1SR99R4Bo-VoZnd4T9rQebt5tczaHNQxT/view?usp=drivesdk
Pics of twrp
NEW UPDATED TWRP 3.2.3-0 here for OPTUS X SPIRIT ( 5044T MT6737M - MT6735M ) everything is confirmed working in the latest build including MTP
TWRP 3.2.3-0
https://forum.xda-developers.com/android/development/twrp-t3903337
Alcatel Versa
First off... Great work and an awesome easy to follow tutorial. Now for the million dollar question... I have an Alcatel 5044c. It's the Cricket version and it's called the Versa. It has Android 7.0. Is this compatible?
Illbeurhuckleberry6666 said:
First off... Great work and an awesome easy to follow tutorial. Now for the million dollar question... I have an Alcatel 5044c. It's the Cricket version and it's called the Versa. It has Android 7.0. Is this compatible?
Click to expand...
Click to collapse
Hey mate,
No not for this recovery your kernel will be different,
If you 5044C is mediatek you can upload me your recovery.img and i can most certainly make you twrp for your 5044C
android version your currently on wont matter TWRP version 3.x.x supports from android 6-9
Matty1993 said:
Hey mate,
No not for this recovery your kernel will be different,
If you 5044C is mediatek you can upload me your recovery.img and i can most certainly make you twrp for your 5044C
android version your currently on wont matter TWRP version 3.x.x supports from android 6-9
Click to expand...
Click to collapse
Hi,
Since others are asking:
Does this support the Alcatel 5044Y?
Is this the latest release?
/Martin
5044c boot.img and recovery.img
Need scatter and flash files please
GH
This guide is specifically aimed for Z010DD users who want to flash custom ROMs:If you want to stay on stock and only wanna flash TWRP and root the Stock ROM, please skip this thread and refer to @jide1 's guide here instead: https://forum.xda-developers.com/as...ot-asus-zenfone-max-zc550kl-qualcomm-t3652518
Things to be noted beforehand:
1. Make sure you are on the latest/final stock rom/firmware
2. Need Unlocked bootloader (Linked below, install the apk and follow the steps)
3. Take backup of all of your data from the internal storage. (To avoid depression if accidentally wiped your precious data)
4. Minimal ADB and Fastboot (Thread Linked below, Download from there and follow on-screen steps).
Steps:
A. To flash TWRP:
1. Once you have unlocked the bootloader, download 'minimal adb and fastboot zip' and PBRP zip(extract img from it).
2. Boot into fastboot by switching off the device, then POWER + VOLUME 'UP'. (You'll enter CSC ode screen, which is fastboot so don't worry)
3. Place the recovery image into the fastboot folder and open a command window there.
4. Connect your device, then type 'fastboot devices' and Enter, just to verify if your device is shown.
5. type: fastboot flash recovery recoveryname.img
THE NEXT STEP IS IMPORTANT, Pay Attention.
6. Now REBOOT Directly to twrp by holding POWER + VOLUME 'DOWN'. Don't boot into system else stock recovery will get restored.
B. Preparing for Flashing ROMs:
Once you have booted to twrp successfully, you will need to 'format' all the partitions, which includes:
System, Data, Cache, Dalvik/ART Cache, & Internal Storage.
HERE YOU WILL LOSE ALL OF YOUR DATA, YOU HAVE BEEN WARNED ALREADY SO, yeah.
Click to expand...
Click to collapse
1. In TWRP, go to WIPE -> ADVANCED WIPE;
2. Select the above listed partitions and then SWIPE TO WIPE.
Note: You will notice a partition called 'ASDF' ,wipe/skip, doesn't matter.
3. Come back to home, go to REBOOT -> RECOVERY
C. Flashing ROMs:
1. Download the ROM, Patch, and Kernel zip (Linked Below).
2. Flash them in the mentioned order.
3. Flash Opengapps (if needed) (Nano Gapps recomended).
4. Reboot.
(NOTE: FOR MAGISK, FLASH IT 'AFTER FIRST BOOT ONLY', AND IF FLASHING ZIP NOT WORKING, THEN see POST #3)
Bugs and Notes:
1. Notification LED doesn't BLINK when a notification arrives, it stays on (colors are correct though).
2. VoLTE is broken on pie roms (ignore the volte logo), stick to Oreo if you want VoLTE. (LTE data works fine).
3. Reboot Sometimes get stuck in black screen, its RANDOM, LONG Press the power button for 15 secs instead if that happens.
4. If any ROM contains 'Always On' functionality, disable it as the feature doesn't work properly. (Ambient display has no issues)
Links: Refer POST #2 .
Credits:
@SakilMondal for roms.
@YaAlex for kernel and patch for Z010DD.
Myself for testing.
Created 2019-04-22
Last Updated 2019-05-20
Links:
ROMs: https://sourceforge.net/projects/zenfone-max-updates/files/Z010D/ (Please flash the latest ones only, don't use old ones)
Patch (link updated): https://anonymousfiles.io/3WLplRtD/
Kernel (link updated + new kernel update): https://anonymousfiles.io/m4oKP6wL/
TWRP Recovery (Image file, Flash via fastboot): https://drive.google.com/file/d/1txHT0vRNo0gTMkD0Sb5kpuQQT0dAiphH/view
ASUS Official Bootloader Unlock Tool for 8939 Devices: http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
Minimal ADB and Fastboot: https://forum.xda-developers.com/showthread.php?t=2317790
Troubleshooting:
Instructions for Magisk:
1. Extract boot image from the rom zip
2. Go to Magisk Manager app
3. Tap 'Install' next to 'Magisk is not installed' line.
4. Tap 'Select and patch a file'
5. Navigate to the extracted boot image. It will now create a new boot image and save it in mentioned location.
6. Reboot to recovery, Flash the Boot image + KERNEL zip.
7. Reboot to system.
To fix CTS Mismatch in Magisk:
Open /system/build.prop, replace the line 'ro.build.fingerprint=' with:
Code:
ro.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Open /system/vendor/build.prop , replace the line 'ro.vendor.build.fingerprint=' with:
Code:
ro.vendor.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Patch is required for sd410 devices??
koushik99 said:
Patch is required for sd410 devices??
Click to expand...
Click to collapse
Nope, patch is only for DD.
Guide has been updated. Please check.
unable to flash GAPPS
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
PRASAD.ASRS said:
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
Click to expand...
Click to collapse
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
ihatebarrels said:
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
Click to expand...
Click to collapse
In both oreo and pie, for both z010d and dd, reboot and shutdown is an issue
It doesn't happen everytime, its random, and no fix is found yet.
Is it working on asus zenfone max 2016 sd 615?
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
james_imch said:
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
Click to expand...
Click to collapse
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Kaustav365 said:
Is it working on asus zenfone max 2016 sd 615?
Click to expand...
Click to collapse
Hope you have read the OP properly
This thread is only for sd615/Z010DD/MSM8939, and its clearly mentioned.
TechNova said:
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Click to expand...
Click to collapse
PBRP Recovery (flashable zip) link is also not working. Please update it.
james_imch said:
PBRP Recovery (flashable zip) link is also not working. Please update it.
Click to expand...
Click to collapse
Done,
Removed pbrp and now Twrp link posted.
TechNova said:
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
Click to expand...
Click to collapse
Hey! I am also facing the same issue. I tried the nano version of Gapps on my Asus Zenfone Max Z010D and my phone is still crashing it keeps restarting and then automatically turns off. Is there any issue to fix this?
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Eric0000 said:
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Click to expand...
Click to collapse
I too facing same problem
Unlocking the apk no longer works
Hello everyone!
There are some handy tools to flash stock firmware on Nokia devices. In this guide, we'll explain how to install stock firmware without the need of any flashing tools.
Here's the download links for Android 10 Firmware (build v2_410_SP02) & boot image.
Download:
Android 10 - Nov 2020 - 00WW_2_410_SP02
Boot img
NOTE:
This is an OTA package which contains payload.bin file. You can sideload the package through stock recovery by following method
or
You can extract the payload.bin file using payload dumper and flash using Nokia Tool or pack the extracted contents as a zip file, then flash using Nokia Flash Tool (NFT)
___________________
How to install?
[This method is useful if you are from any other ROM / have erased all the data from your device using TWRP; Now want to flash the stock rom, but not ready to flash using above mentioned tools as they take more time for payload.bin extraction, repacking etc.,]
Let's get started!
- Keep the boot img on your PC
- Move the downloaded OTA file to the external SD Card
- Power off the phone
- Hold Volume down + Power button (device will boot into bootloader mode)
- Connect the device to PC with USB cable
- Open command prompt on your PC
- Flash the boot img using fastboot command
fastboot flash boot boot.img
- Reboot to Recovery mode (Select "Recovery mode" from bootloader. Android logo will appear. Press Volume up + Power button at the same time. Now the device will boot into Recovery mode)
- Select "Apply update from SD card"
- Navigate to the downloaded OTA zip from external SD card and select it
- After installation compete, you can reboot the device into stock Android 10.
That's all!
(In some cases, the recovery may ask to perform a factory data reset. Proceed to reset and then reboot the device)
Thanks: @Raghu varma @singhnsk @hikari_calyx @sayaoks
hello! thank you for the tutorial
this seems like the only method to downgrade to be able to unlock the bootloader.. unfortunately the boot.img link is dead, do you have it somewhere? would you mind reuploading?
this is ddva any ddv?
Is this the way how to get back to "normal" Nokia images?
The one linked in the first post can also be replaced with newer ota images? Like
https://android.googleapis.com/packages/ota-api/package/3835d2733c190ef38b7064b94dd32cb26615e3ea.zip ?