XTC Clip Guide
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Guide Shows You How To Use Your XTC Clip To Unlock Your Desire S.
What you need for this Guide:
sdcard
desire s
XTC Clip
flex cable that fits your device
Windows xp / 7 / vista computer
Guts
1. First you must have all equipment ready.
2. Turn off your Desire S, Then once it's Fully powered down press and hold the volume down button. Then press the power button ( make sure that when you press the power button your still pressing down the volume down button ).
3. When the boot loader screen come's on look for the line that starts with HBOOT.
4. Write down what HBOOT you have. Then turn your device off
5. Plug in your sdcard and run the XTC Clip program, and select Saga-Desire S as your device. Then select the HBOOT that you wrote down in step 4.
6. Start the Gold card program and wait until it is done.
7. Take out the sdcard from the XTC Clip and insert into your phone.
8. Plug in the flex cable into your device then plug the other end into your XTC Clip.
9. Make sure all leads are properly inserted.
10. Power on your device using the Volume Down and power button at the same time.
11. Wait 30 seconds until your phone displays a NEW menu.
12. Accept the screen dialogs you see.
13. You will then see a screen that says **clean S58 Data** Press accept and WAIT until it has finished.
14. Once it has finished you will be sent back to the **clean S58 Data screen**. don't worry just reboot your device and your now s-off with a unlocked device and super CID.
If i have helped you CLICK my THANKS button. Don't block up this Thread with stupid comments like thanks or good job. only ask serious Questions in my thread.
Any questions don't hesitate to ask me. If u need any other help just shoot me a PM.
TIPS:
Please note that once you use the XTC clip you CANNOT use any OTA via HTC if you do you might end up with a BRICKED DEVICE.
If you want to update you can use ANY RUU From any region
HAVING TROUBLE WITH YOUR FLEX CABLE GOING INTO YOUR XTC CLIP :
Follow these pictures 2 easy steps
video coming soon ( later today )
Related
I'm trying to flash a new ROM and can't get past the USPL stage
I run the 'uspl_116_jockyw.bat' and pause it on the "start MTTY [or whatever] or RUU" and I then try to the run the ROMUpdateUtilitiy.exe.
All goes well, but at 100%, it says "Image file is corrupt" and then that's it, it restarts.
I've tried different versions of the file with no success
Is it to do with my Application unlock? When I run that is says something along the lines of "SDA [or phone] is not unlockable" but I click unlock, and it instantly says "unlock successful"
At the moment I've only been able to install Opera. WIFIRouter and Messenger won't install.
Thanks
first unlock with the sda unlock. then flash uspl. run rom update utility.exe. after that run flash.exe on whichever rom it is that u wish to flash. if this doesnt work, do a hard reset and repeat all the steps. 100% it will work. when u get to the final prompt asking u to start mtty or whatever, dont press any key to continue the process. instead run ruu.exe. itll work
So is it normal for the Application Unlock utility to say "This device is not unlockable" [or something along those lines].
I can't install any programs on the deivce either. It says they don't have the correct permissions. Is that not what the app unlocker is meant to do?
EDIT:
OK, so this is what I am doing:
1) hard reset the phone [hold soft keys, turn on, press end etc]
2) connect to ActiveSync
3) Run SDA_ApplicationUnlock.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) I click OK and it claims to have unlocked.
5) remove SD card and turn phone off then on.
6) Run uspl_116_jockyw.bat. I hit enter a few times,my phone then asks me to confirm running an app. It does this twice, the last being harat.exe. Screen goes black with Tux the Penguin.
I halt on this screen [Ignore the error - I screen capped this on a later attempt without hard reset]
I then run ROMUpdateUtility.exe check the boxes, and click next etc. It goes to RGB bars, then a grey screen with a progress bar. The bar gets to 100% then I get this error
and the phone resets?
What am I doing wrong?
Any help is appreciate. I can't stand the Orange crippled ROM.
Thanks
Right HERE is the solution for any Orange SPV e650 users wanting to unlock and flash.
These 3 files are crucial:
MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB
MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB
RemoveSecurity.CAB
Only once those have been run can you follow the steps found on the wiki page.
Thanks to everyone who works on these ROMs. It's is simply awesome the work you do.
I salute you!
Hard Reset LG Optimus GT540 100% working method
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can use this technique to solve
= Remove Wrong trials in entering password
= account blocked and no access to menu
= to remove all your data from phone
= to remove viruses or malware application
= to speed up your device.
LG Optimus GT450 Hard reset is easy and can be done by anyone.
Follow this easy steps
1) Start your phone [phone must be started with or without sim]
2) Press volume up button + home button + search button
[Location of volume up button is on right side, location for home button is on bottom middle button of home screen and search button is right side of phone above camera button]
3) Keep all those button pressed at the same time for 5 second
4) Phone will ask you for " Are you sure you want to factory reset?"
5) Press yes and wait for 1 minute, Phone will hang first and than restart after sometime.
6) You've done resetting your GT540 successfully
Be careful, This trick will Erase / Format all your private data including contacts SMS and other things.
thanks to GSM_Update
what's the name of the clock widget that appears on the image?
excellent post i have unlock lg g540 sucefully
dosn't work
It dos not work if your phone can't already start up(loop on Android splash screen)
It's Vol Up + Home + Camera a LG GT540 I came across.
xtranophilist said:
It's Vol Up + Home + Camera a LG GT540 I came across.
Click to expand...
Click to collapse
that is emergency mode sir ~~
Hi,
My LG Gt540 is locked too many pattern attempts.
It doesnt have a SD card neither SIM card, Im trying this tutorial to hard reset it, but no message pops out.. whats the problem?
Thx in advance
Hi guys,
I just bough a used HTC One S. The device has rooted by previous owner. There is a custom rom but I do not know which one it is. I want to install CM10 to my phone. I tried to follow the step from this a video but I have a problem. After writing the "fastboot flash boot boot.img" command, the guy from the video hits the "HBOOT" button but there is no "HBOOT" option in my phone's "FASTBOOT" menu. As far as I guess, because of that, I cannot flash "boot.img" and cannot see recovery menu of this boot. So what should I do in this step, I would be appriciated if anyone could help me.
The video's title is "HTC One X: Jelly Bean CM10 (Cyanogenmod) - How to Install - Cursed4Eva". I cannot add link because of lack of post.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How about... like... Following a guide ment for the one S, instead of a guide for a completely different device?
yea, the right guide for your phone will help!
also, can you still boot into bootloader to make sure phone still works:
do this by pressing vol- and pwr at same time until screen goes black or for about 8-10 seconds. then release power, but continue to hold vol- till phone boots into bootloader. Once there you can use volume rocker to go thru choices and pwr to select. at this point you can press pwr with the FASTBOOT highlighted blue, then then select reboot. Or you can go down to recovery and select it and see if you can get to recovery. if you get stuck just reboot into bootloader as mentioned above.
also, you can check which rom is on phone by going to Settings/About Phone and scroll to bottom. since you don't know that, i would suggest getting much more familiar with the phone and your bootloader screen before flashing roms.
whichever rom you flash, read the OP page carefully and first and last 20 pages of thread. also, include wiping system as part of any full wipe.
recommend TWRP recovery, which you can get thru goo manager from playstore as opposed to cwm.
make sure whether you have an S4 or S3 phone. S4's will run at 1512mhz
anyway read, read, read and make a backup of your phone and sdcard asap
Tutorial;
How to root the K701 ( Empire Electronix ) Tablet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Intro;
1 Stuff you need
2 Preperation
3 Rooting
1 Stuff you need
Windowsbased computer/laptop
Connection cable ( Micro-usb to usb ) to connect your tablet to your computer
Zhuodashi 2.2.9, you can download it right here http://angelsdust.nl/download/zhuodashisetup.exe DON'T install it yet
2 Prepping
Download Zhuodashi 2.2.9 and save it on your desktop
If you saved it, we are going to instal it, step by step ( don't work ahead because you might screw it up........)
Double click the setupfile
Click on the red marked options
Again, click on the red marked options
Now you can select a destionationfolder, but that's not important.
Because if you wish you can delete the program afterwards.
I advise to follow the steps as shown below, and keep continuing clicking the red marked buttons
Again, click on the red marked options
Be sure both options are marked, and then click the red marked button
And click again the red marked button
Now, pay attention, both options should stay open.
And then pres again the red marked button.
Congrats,
If al went well, you just installed Zhuodashi
3 Rooting
Switch of your tablet
Make sure that you REMOVE the SD-CARD ( it's very important that you remove the sd-card, otherwise it won't work )
Now switch on your tablet
Go to settings/ developer options and switch USB-Debugging on
Now connect your tablet with your computer/laptop
On the tablet next to the clock you wil see a pictogram, just swipe it up
and tick on Usb connection
If al went well it should look like this
Now it's time to launch Zhuodashi
Click the red marked button
It should now look like this
Click the red marked button on the left ( next to root )
Now press ROOT
Yep, the red marked button
If you get a red cross, just click again
Now, you can close the program
4 Finishing
Now disconect the tablet from your laptop/computer
and go back to your homescreen
If all went well, you can remove Zhuodashi from both systems
If the app superuser not installed, you can get it from the google store
But it should be automaticly installed during root.
Congrat's your tab should now be rooted.......................or in digital heaven
Credits of this tutorial goes to "Leeuwarder"
I just did the translation
Source;
http://angelsdust.nl/
It just came to my attention that angledust has deleted the original files.
But i stil have a backup from the Original tool.
https://www.dropbox.com/s/vblifq9gx9t13hu/zhuodashisetup.exe?dl=0
Hello,
I have Samsung Galaxy Note 10.1 ( Old version ) .
I got a problem with my device
I can`t turn it on anymore, when I hook it up with USB plug into ( PC ) or ( Power Adapter ) I got the following screen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so I thought its not charged.
But then I left it to charge full ( 3 - 4 hours or maybe more ) but when I turn it on the welcome screen shows and stucked forever like following :
I tried to reset the factory and data and cache and everything inside BOOT list ( into "Power + Voulme up " menu ) but nothing happen too and the welcome screen still keep stucking .
What can I do ?
Some people told me I should put a new ROM/Software into it
But what is true ? and where is the problem ?
Please HELP !
I can't see any of the pictures you have put in your post. Have you tried reflashing your current rom onto your Note 10.1 with Odin? That usually fixes problems like this and it lets you keep your data.
link6155 said:
I can't see any of the pictures you have put in your post. Have you tried reflashing your current rom onto your Note 10.1 with Odin? That usually fixes problems like this and it lets you keep your data.
Click to expand...
Click to collapse
I am not familiar with Odin nor reflashing and stuff .
m4xst4r said:
I am not familiar with Odin nor reflashing and stuff .
Click to expand...
Click to collapse
1. Find the firmware for your device base on it's model number: http://www.sammobile.com/firmwares/
2. Download Odin onto your computer and run it.
3. Get your tablet and when it's turning on, hold the power button and volume down button until you get to the warning screen.
4. Press volume up to continue to download mode and plug your tablet into your computer via USB
5. On your computer, make sure Odin says "Added!". Load the firmware as a PDA into odin and press "Start". Do not unplug your tablet until the process has finish.
6. Android should begin to update and once that's done you should be good to go.