I'm trying to flash a new ROM and can't get past the USPL stage
I run the 'uspl_116_jockyw.bat' and pause it on the "start MTTY [or whatever] or RUU" and I then try to the run the ROMUpdateUtilitiy.exe.
All goes well, but at 100%, it says "Image file is corrupt" and then that's it, it restarts.
I've tried different versions of the file with no success
Is it to do with my Application unlock? When I run that is says something along the lines of "SDA [or phone] is not unlockable" but I click unlock, and it instantly says "unlock successful"
At the moment I've only been able to install Opera. WIFIRouter and Messenger won't install.
Thanks
first unlock with the sda unlock. then flash uspl. run rom update utility.exe. after that run flash.exe on whichever rom it is that u wish to flash. if this doesnt work, do a hard reset and repeat all the steps. 100% it will work. when u get to the final prompt asking u to start mtty or whatever, dont press any key to continue the process. instead run ruu.exe. itll work
So is it normal for the Application Unlock utility to say "This device is not unlockable" [or something along those lines].
I can't install any programs on the deivce either. It says they don't have the correct permissions. Is that not what the app unlocker is meant to do?
EDIT:
OK, so this is what I am doing:
1) hard reset the phone [hold soft keys, turn on, press end etc]
2) connect to ActiveSync
3) Run SDA_ApplicationUnlock.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) I click OK and it claims to have unlocked.
5) remove SD card and turn phone off then on.
6) Run uspl_116_jockyw.bat. I hit enter a few times,my phone then asks me to confirm running an app. It does this twice, the last being harat.exe. Screen goes black with Tux the Penguin.
I halt on this screen [Ignore the error - I screen capped this on a later attempt without hard reset]
I then run ROMUpdateUtility.exe check the boxes, and click next etc. It goes to RGB bars, then a grey screen with a progress bar. The bar gets to 100% then I get this error
and the phone resets?
What am I doing wrong?
Any help is appreciate. I can't stand the Orange crippled ROM.
Thanks
Right HERE is the solution for any Orange SPV e650 users wanting to unlock and flash.
These 3 files are crucial:
MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB
MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB
RemoveSecurity.CAB
Only once those have been run can you follow the steps found on the wiki page.
Thanks to everyone who works on these ROMs. It's is simply awesome the work you do.
I salute you!
Related
When i connect the Magician and try to update i get a 201 error.
I'm sure de device is connected because i can see this in the device manager. When i try this, i'm in the bootloader without a SD card. Can somebody please help me because i used the greek update and got the 15 sec reboot thing.
Ok. I now tried the MaUpgradeUt_NoID on several Rom's but then my update info fields are emplty (see picture)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I get this when i try to update in the bootloader (USB V1.00)
I realy don't know waht i'n doing wrong.
Ta wiz.
I will just stick with installing it as is then.
Folks, all I have done is:
1. Extract the finnish rom into a folder using winrar.
2. Copied MaUpgradeUt_NoID.exe into the folder.
3. Disabled USB in ActiveSync.
4. Run MaUpgradeUt_NoID.exe
5. Reset the iMate into Bootloader using Camera+Power buttons held with soft reset.
6. Connected the iMate with USB.
On the last stretch now so I will post results.
Regards...
NeungBoy said:
Ta wiz.
I will just stick with installing it as is then.
Folks, all I have done is:
1. Extract the finnish rom into a folder using winrar.
2. Copied MaUpgradeUt_NoID.exe into the folder.
3. Disabled USB in ActiveSync.
4. Run MaUpgradeUt_NoID.exe
5. Reset the iMate into Bootloader using Camera+Power buttons held with soft reset.
6. Connected the iMate with USB.
On the last stretch now so I will post results.
Regards...
Click to expand...
Click to collapse
This is exactly the way i'm doing it but i still get the empty fields like i posted.
Try restarting the PC!
i've read that for some people it solved this problem
I still got the same problems. If i use the original MaUpgradeUt i get the "error 201: get device data error" and if i use the MaUpgradeUt_NoID i get the empty version thing. Can somebody please help me? I even tried to upgrade with the SD method but only found the spanish ROM on the xda-delveloper FTP with no results. If somebody nows where to find the ROM mda_compact_upd_en_1.zip from the nowicom.com page, could you please let me know?
I'm realy out of ideas so if somebody got any.........
is there a posibility that I killed my bootloader? if zo, can somebody please tell me if I can fix it?
error 201: get device data error
I now tried the MaUpgradeUt_NoID on several Rom's but then my update info fields are emplty (see picture)
now i cant get flash in my imate jam plese some body tell me method how i flash and where i get stuff for it
my email
[email protected]
I was flashing my gsmarti's ROM this morning... I follow all the steps and it is successfully go into the "flashing environment"... Unfortunately, the process stuck at the beginning... and suddenly, it turn off itself... then, I cant switch on my phone anymore... and I dont even get the static Gigabyte screen as well...
Is there any solution to this?
Thank you!
Do you know where to find the Rom Upgrade Utility for your phone?
If you go to your carrier's website and log into it, do you by any chance have a downloadable file that will restore your phone to its factory settings?
There's also many different GSmart models .. which one do you have?
I looked up Gsmart phones, and their support site has firmware upgrades listed for some of their phones .... see if you're is listed.
http://www.gigabytecm.com/eng/gbc_supportcategory.aspx?sid=7&tabIndex=3
Thank for you reply =)
Actually i am using gsmart i (64)... and i have the latest firmware with me...
Because this device is using POCKET GHOST to restore and backup the system...
as i mentioned earlier... my "flashing" process is stuck at the beginnig... so, in my opinion, i think the pocket ghost has been deleted and i cant do the flashing anymore... is it true?
If it run's Windows Mobile ... you should be able to run the RUU at the bootloader screen....
As far as how do you get into the bootloader on your phone ... I have no idea.... on mine, I soft reset while holding the camera button in and keeping the camera button held in until the bootloader screen comes up which looks something like this (note i just randomly found this pic on google images)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi... thank you ya...
but i am still stuck in the black screen...
and i cant find any way to access into the bootloader...
i am searching the other sites... and i came across this:
they said if anything goes wrong during "flashing", the ROM will be locked...
is that true?
and one more thing, the bootloader, is it almost same as the bios (cmos) of
our pc?
and for your information... a lot of people are having the same problem...
thx thx... appreciate!! =)
Is this the bootloader?
Yep, that is our bootloader for the Gsmart series. On the i300 its accessed by pressing the red phone, green phone and power buttons at the same time.
If you want to change your ROM then you need to load the new version to your SD card (and I think it needs to be the only contents on the card).
I'm a newbie trying to find the perfect ROM on a HTC Touch Diamond, I've followed the instructions posted here: http://forum.xda-developers.com/showthread.php?t=416211, and managed to install this ROM provided by Energyrom: EnergyROM_21864_DIAMOND_10.Nov.2009_StandardM2.5.
I'd like to install a lighter ROM that is as close to the standard HTC/ WM 6.5 as possible and am looking for recommendations. But first I need to remove the Energyrom and have no idea how to do this? Activesync works intermittently if I wipe the device, and set the activesync settings to not seek permission, and remove all partnershps from my PC. But as soon as I try to run the RomUpdate Utility it fails to run because off a bad connection with the phone. Then the Windows Mobility Centre just shows an error and I have to go through the process all over.
Any help much appreciated
Welcome to forums
No need to remove the ROM, when you find the new ROM you want to flash just flash it and that´s all!
Thanks Orb.. ...however..
...The real problem is the ActiveSync. Once I have used the 'wipe device' control in the settings, and removed previous partnerships, I can connect the phone via Active sync. However, by the time the Rom Update Utility is running it appears that the connection is dropped, the Rom Update Utility cant communicate with the phone and then when I reconnect I just get an Error Icon in Windows Mobile Device Centre. This is preventing me from overwiritng with a new ROM.
I would perform a hard reset instead wipe device option.
Instructions here:
http://wiki.xda-developers.com/index.php?pagename=Diamond_HardReset
Try after HR and most likely should work, then you can change ROM
Still no luck...
Thanks ORB, but this still does't work, the phone is connected through activesync but all rom update utilities just stop with an Error 224
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is sooo frustrating - is there any way to fix the activesync, or some way of removing/ replacing energyRom, even getting the phone back to HTC standard would be better than the current state.
thnx
Flash from internal storage
Howdy,
Not sure I'd blame the rom, more likely a USB problem or activesync has always seemed flaky. Anyway do the flash from the device.. Copy about any ROM file to root of the internal storage area (either in storage mode or try active sync but it's slower & seems you're having issues) but name it DIAMIMG.nbh then reset your phone while holding down VOLUME DOWN & BACK buttons and you'll get the upgrade menu where it should tell you it found an OS rom & it's ready & you just press POWER button to start the process, resetting it when it says it's completed successfully.. That has been pretty much the way I've updated roms on the Diamond for a long time now (Really handy to have a few roms on there & just rename when you want to flash it..) & seems MUCH faster & much more reliable & should solve your problem.
Hope that helps.
Bill
I bought a ebay Garminfone (it's my second) and it came with 1 attempt left to enter the code. I've ordered the code, but I wanted better odds than 1 try.
Hold D-Pad left while powering on. Hold D-Pad LEFT until the next line appears:
"Wipe userdata" appears on the screen. It can take a few minutes to run its course.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It wipes EVERYTHING off the phone. Just be warned.
I did a Master Clear when it restarted, just for good measure. I have no idea if I needed to or not. I had a T-Mo SIM card (unregistered) to be able to access the Master Clear section. It may work without doing the Master Clear.
But it does reset the counter to 10 tries!
This process may even work on a HARD LOCKED phone that shows 0 attempts left, but I have not had cause to try that. This method wipes everything on the phone and restores it with the hidden/secure recovery image. Hard Lock seems to be a software issue, which can probably be changed with this method.
After I did this, I changed the .update file to the Canadian one for Videotron. The 10 tries stuck!
I am just waiting for my unlock code to give it a try.
I think it's pretty safe to buy used phones that claim not to read the SIM card etc now. Updating the old 1.6 version to 2.1 fixes that. D-Pad left + power fixes almost everything else.
This process should be able to recover from anything except if you've screwed up the bootloader or the hidden recovery image.
this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this
segun4u said:
this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this
Click to expand...
Click to collapse
pls someone help me here, i have code to unlock but phone is hardlock,
About the phone:
1. I dont know the exact phone model, but it is Cloudfone Ice plus. There is a phone called Cloudefone Ice (Huwawei u8500) but i dont know if mine has another name.
2. It looks like this,
h++p://cdn2.sulitstatic.com/images/2012/0926/222830332_22162996997ba02ceb979675b8093b33516b3b725d6504ce0.jpg
3. Adroid version 2.2.1
4. Detected as "Globe Phone" in Google Play Market. *Globe is a carrier in our country.
The Problem:
When I turn it on, the android logo appears, and stays like that forever.
Cause:
After I tried to install a custom ROM using update.zip in recovery mode, the process got aborted in the last part of the installation.
5. I'm not sure if it's fully rooted, I have superuser but when I tried Root Checker before, it's not.
Other info,
I already tried to boot in recovery mode(it's the only mode that I get into now), I wiped data and cache/factory reset.(still stuck on boot screen)
I tried to install other Roms(update.zip), but all gets aborted in the beginning
I tried to download an update.app file in a dload folder in the root of sd card(firmware for huwawei)- I can't go to update firmware.I can only go to recovery mode.
I tried adb, I can use adb devices, it shows MT(serial number)
adb shell shows adb shell exec '/system/bin/sh' failed: no such file or directory exists
superboot cant detect the device.
I boot the device using power button+volume up,
when I use power+volume down, android logo appears and "Factory Mode" in the lower left (then It stays there forever, whatever button i press)
These are the infos that I can give, please help, I'm looking for fixes since yesterday from google and forums but no luck, nothing works so I decided to post my own.
image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
no spaces in link