Related
Hello guys, im going to sell my S6 Edge and get an S7 Edge at a good price...im doing this mainly because the S7 edge has more battery and thats all really..
The point is that i want to flash a stock rom before selling my s6e...im from italy my phone is not branded and is the international version the G925F....Where do i find the right stock rom? i want to flash a Stock rom with 3 files cause right now i have btu csc and i want to put everything as it was when i got the phone with italian csc etc...so who ever buys it can update it normally...
SamFirm > Binary Nature > Odin + re-Partition > You're done
iDroid27210 said:
SamFirm > Binary Nature > Odin + re-Partition > You're done
Click to expand...
Click to collapse
Can you explain it better? I dont know where to find the right stock firmware from italy and not branded..
Use this tool (not the website !) : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Once you opened it, fill the boxes :
Model : SM-G925F (S6 edge int.)
Region : ITV (Italy unbranded)
Check Binary Nature box then Check Updates
Then uncheck Check CRC32 and check Decrypt automatically and do DOWNLOAD
(now wait because 2.5GB could take time ~)
When "Decryption finished." appears, close SamFirm then extract the ZIP archive in your documents (delete the enc file).
With the latest Odin version (3.12.3 available here : https://forum.xda-developers.com/showthread.php?t=2711451)
Download the S6 edge PIT here : https://mega.nz/#!9A4hQD7T!NIG6GXH40pGUP6kfWMF0WnXxLXMqQybfo4FOheu0rn8
In Odin, fill BL, AP, CP and CSC by the files you extracted.
Then go on PIT and select the PIT you downloaded.
On options, ensure that these options are checked :
Auto Reboot
F. Reset Time
Re-Partition
Nand Erase All
Then, put your phone into download mode and start flashing !
iDroid27210 said:
Use this tool (not the website !) : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Once you opened it, fill the boxes :
Model : SM-G925F (S6 edge int.)
Region : ITV (Italy unbranded)
Check Binary Nature box then Check Updates
Then uncheck Check CRC32 and check Decrypt automatically and do DOWNLOAD
(now wait because 2.5GB could take time ~)
When "Decryption finished." appears, close SamFirm then extract the ZIP archive in your documents (delete the enc file).
With the latest Odin version (3.12.3 available here : https://forum.xda-developers.com/showthread.php?t=2711451)
Download the S6 edge PIT here : https://mega.nz/#!9A4hQD7T!NIG6GXH40pGUP6kfWMF0WnXxLXMqQybfo4FOheu0rn8
In Odin, fill BL, AP, CP and CSC by the files you extracted.
Then go on PIT and select the PIT you downloaded.
On options, ensure that these options are checked :
Auto Reboot
F. Reset Time
Re-Partition
Nand Erase All
Then, put your phone into download mode and start flashing !
Click to expand...
Click to collapse
Isnt there an easier way? it says that tool is deprecated, i downloaded the latest rom from updato http://updato.com/firmware-archive-select-model?record=31F6CFE2AE0E11E6B04AFA163EE8F90B...what do i need to do now?
It's not. You downloaded the one part firmware, which not contains all parts of the full firmware. Download the Binary Version though SamFirm, that isn't deprecated (just an dishonnest advertisement for his new firm website).
iDroid27210 said:
It's not. You downloaded the one part firmware, which not contains all parts of the full firmware. Download the Binary Version though SamFirm, that isn't deprecated (just an dishonnest advertisement for his new firm website).
Click to expand...
Click to collapse
Thanks bro, everything worked perfectly...your amazing man :good::good:
I just had a problem with the net framework 3.5 installation, i have my windows updates disabled and had to enable it to install net framework 3.5 so i can use the samfirm tool...
now i just hope someone will buy my s6edge as fast as possible. :fingers-crossed:
I have gone through several xda forums. But I think my problem ia different. Whenever I try to flash stock ROM through ODIN into my Samsung Galaxy S6 (SM-G920F) It checks everything as it would normally. When I press start, it goes very fast showing system.img recovery.img and blah blah all. But all of a sudden, it fails
While flashing, it doesn't even take enough time that is required to flash a normal Galaxy S6. All those texts are written in the ODIN window within 10 seconds.
I flashed Noble Nougat Experience 3.1 by @AlexisXDA
But OTG isn't working. So I wanted to revert. But now, I can't. Any help would be appreciated
What's the error in Odin when it fails?
This can determine where the fault lies, also try another usb cable as I've had flash fails due to usb cable.
In the mean time you could try one of the other stock custom roms, otg doesn't work in NNE because of the kernel.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
_s.w.a.p.n.i.l_ said:
I have gone through several xda forums............................ But now, I can't. Any help would be appreciated
Click to expand...
Click to collapse
Hey Swapnil, use SmartSwitch on PC and go for Device Initilization, your problem will be solved.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
Click to expand...
Click to collapse
Thanks man. This tutorial really woked. I don't know why it couldn't intake firmware from sammobile through normal ODIN. But it's back to stock finally. Thanks again. Thanks everyone.
Hello - I am reverting from a custom firmware to Stock and flashed stock last night using:
Security Patch Level 2017-12-01
Product code SWC
PDA G920FXXS5EQL5
CSC G920FVFG5EQJ5
The first try failed at hidden.img and I used a pit file and suceede the 2nd time to successfully stock flash.
I used ZEROFLTE_EUR_OPEN_HIDDEN200M.pit which is multi CSC to support SWC which is what I need for OTA Updates.
I do not want to root my phone again but don't mind reflashing/resetting/factory resetting.
Samsung Info App now shows:
Product Code: SM-G920FKZESIM
Original CSC Code: <BLANK>
Firmware CSC Code: SIM
Active CSC Code: SIM
Available CSC Codes: ATL, CNX, CYV, MOB, MTL, OMN, SIM, SWC, tCL, VD2, VDC, VDF, VDH, VGR, VIP, VOD
CSC Country: Slovenia / SI
Mobile Operator: SwissCom
How can I get the CSC Code set to SWC? I want to get Voice over IP calling working which SwissCom says should be working.
Any advice on next move?
try this, not sure if it works: *#272*imei#* -Display/change CSC code
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: SWC
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
Hi forumber2 - Thanks for the detailed response. I ran through the steps but the phone still shows Slovenia CSC. I then did a factory reset and still the same.
The Samsung Info app actually shows the same data as before:
Product Code: SM-G920FKZESIM
Original CSC Code: <BLANK>
Firmware CSC Code: SIM
Active CSC Code: SIM
Available CSC Codes: ATL, CNX, CYV, MOB, MTL, OMN, SIM, SWC, tCL, VD2, VDC, VDF, VDH, VGR, VIP, VOD
CSC Country: Slovenia / SI
Mobile Operator: SwissCom
Still no VOIP calling. Even had my provider send me a new SIM card,
Hey guys I have a g920f and was just messing around yesterday
I installed this rom https://forum.xda-developers.com/galaxy-s6/development/rom-revolution-note7-port-t3461397 with TWRP and now my touch input is all messed up, even in TWRP. I cant swipe in twrp so I flashed some old version of philz where i managed to format everything, I even reflashed my pit and reflashed TWRP but the touch input is still totally messed up
I can't even swipe in TWRP so if I cant fix this my phone is going to be a brick. **** xD
Anyone encountered this before?
Also I cannot restore via Smart Switch or Kies because it says unsupported device. I guess its because i didn't play by samsung rules?
Eklondh said:
Also I cannot restore via Smart Switch or Kies because it says unsupported device. I guess its because i didn't play by samsung rules?
Click to expand...
Click to collapse
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
When your device is ready to set up, try to setup it. You need to go to dialer application.
And then dial *#2663# in the dialer and update the thouch screen penal firmware by selecting 'TSP FW update (General)' button.
Original contributer for this fix is @Wuby986
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
When your device is ready to set up, try to setup it. You need to go to dialer application.
And then dial *#2663# in the dialer and update the thouch screen penal firmware by selecting 'TSP FW update (General)' button.
Original contributer for this fix is @Wuby986
Click to expand...
Click to collapse
Holy **** it worked!! Omg Man u really saved my phone.. ****
If I'm ever in Turkey Im gonna buy u a beer for sure!!
Also, this post should be stickied somewhere I mean its pretty damn important if anyone happens to mess up their phone.
A thousand thanks again dude, You are the ****ing best!!
Hello,
I bought a Galaxy S10E SM-G970F in Germany in 2019 and I am using a German sim provider. However my phone has OXM CSC and shows as TPH (portuguese). That means eg. I cant use Samsung Pay in Germany. Does someone know a way to change my CSC to DBT? Thanks in advance
Bukaro said:
Hello,
I bought a Galaxy S10E SM-G970F in Germany in 2019 and I am using a German sim provider. However my phone has OXM CSC and shows as TPH (portuguese). That means eg. I cant use Samsung Pay in Germany. Does someone know a way to change my CSC to DBT? Thanks in advance
Click to expand...
Click to collapse
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!
kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!
Click to expand...
Click to collapse
Thanks, the first method worked fine
it will works for S10?
kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
Click to expand...
Click to collapse
will it work on the S10?
Yepp, someone who own a g973 reports that it works. Should work on any device.
So I will try in few minutes Wait for fedback
@kullanici32 Thanks a lot. First method works on g973
@hanspampel , you were right. I can confirm that works on g973
Thanks for both!!!
Hello!
Is there any way to change the CSC without resetting the phone? I used SamKEY on Android 10, but after my S10 got updated to Android 11 - it no longer works...
No. CSC changing contains a factory reset.
navy3dfx said:
Hello!
Is there any way to change the CSC without resetting the phone? I used SamKEY on Android 10, but after my S10 got updated to Android 11 - it no longer works...
Click to expand...
Click to collapse
As @hanspampel said no possible
Chimera tool can change your CSC without data loss. Not free though
You can also update firmware by USB flashing without losing data. After flashing, Device will reboot into Recovery, just click Reboot, do not wipe/factory reset.
If you can remove the "userdata.img" from the AP file with 7zip it will also work with ODIN flashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mujie said:
If you can remove the "userdata.img" from the AP file with 7zip it will also work with ODIN flashing.
Click to expand...
Click to collapse
How to do this actually? When I try to delete the file in 7zip it clearly warns 'not implemented':
In addition it warns that there is some data after payload data (which means 7zip actually might not support the architve type):
I'm using the latest 19.00 version of 7zip. Any other hints to flash with Odin? Thx!
xaweryp said:
How to do this actually? When I try to delete the file in 7zip it clearly warns 'not implemented':
View attachment 5213363
In addition it warns that there is some data after payload data (which means 7zip actually might not support the architve type):
View attachment 5213361
I'm using the latest 19.00 version of 7zip. Any other hints to flash with Odin? Thx!
Click to expand...
Click to collapse
Follow instructions in this link
Account Suspended
Ignore the hidden.img file, dont tamper with it. Just use the instructions to remove USERDATA.IMG and repack the firmware file with 7zip following those steps.
Hi,
thanks for a guide. Unfortunately this does not work for me (tried using both 7zip 19, and older/stable 16.04). Each time after repacking I get in Odin (3.14.4):
I beleve this is actually because of the payload data that's present in the original tar and mising after repacking.
Even for a testing purpose I just tried to extract and repack tar (without any changes) the error is there, sizes are different => thus payload is gone (might be it's just a md5 checksum after the end of archive):
xaweryp said:
Hi,
thanks for a guide. Unfortunately this does not work for me (tried using both 7zip 19, and older/stable 16.04). Each time after repacking I get in Odin (3.14.4):
View attachment 5219235
I beleve this is actually because of the payload data that's present in the original tar and mising after repacking.
Even for a testing purpose I just tried to extract and repack tar (without any changes) the error is there, sizes are different => thus payload is gone (might be it's just a md5 checksum after the end of archive):
View attachment 5219241
Click to expand...
Click to collapse
You could try to remove .MD5 from the file name and name it as XXXX.tar
Renaming the file to TAR extension will bypass the checksum analysis by Odin and it should flash normally.
Warning: If the file is still corrupt somehow you could softbrick your phone and will have to flash the full firmware file you downloaded to restore your device. Which will inevitably delete your data
mujie said:
Renaming the file to TAR extension will bypass the checksum analysis by Odin and it should flash normally.
Click to expand...
Click to collapse
Thanks a lot for your help! This worked with no issues indeed
mujie said:
You can also update firmware by USB flashing without losing data. After flashing, Device will reboot into Recovery, just click Reboot, do not wipe/factory reset.
If you can remove the "userdata.img" from the AP file with 7zip it will also work with ODIN flashing.View attachment 5201295
Click to expand...
Click to collapse
I removed the userdata.img than used odin to flash the firmware but csc did not change
wadialdoor said:
I removed the userdata.img than used odin to flash the firmware but csc did not change
Click to expand...
Click to collapse
CSC change is easily done with paid tools like CHIMERA and Z3X
i bought a s10e about 4 weeks ago. on this device: SAOMC_SM-G970F_CKH_HTS_RR_007 HTS/HTS,HTS/HTS.
no idea how this came to germany. the goal: conversion to DBT, Magisk, TWRP and LOS.
first step: download Samfw.com_SM-G970F_DBT_G970FXXSEFUL1_fac.zip, the last Firmware DBT Android 11.
Samfw is one of more Server, use your own preferred.
the next firmware is with Android 12 (not need why LOS A 12 is beta avalaible).
next step: Odin flash AB, BL, CP, CSC from this FW(FUL1).
now Phone have DBT/DBT/,DBT/HTS.
this is STATE from Jan. 2022
it is important to have the FW on the PC.
for everything that is flashed afterwards and ends in error you can get
the phone running again with Odin flash firmware.
even a green-screen (don't be irritated - this is also the download-mode) is not possible.
it took me 3..5 times to start all over again in next step.
next step is Magisk, TWRP and LOS. this is here OT and following as new HoTo
kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!
Click to expand...
Click to collapse
Tried the first method, but it only let's me select from few specific cscs(about half of them I couldn't find on the internet, and those that I did find are from south American countries - which isn't helpful to me I want my servive provider csc or at least some European country). What could be the cause of this? This is on my s20 ultra 5g device(sm-g988b)
kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!
Click to expand...
Click to collapse
I tried the first method but it doest not give me the csc of my service provider (or at least my country or any other European country) - it only gives me the option to switch to unknown cscs or those of south American countries which isnt helpful to me. Any idea what could be the cause of this issue and how to fix it? This is ony my samsung galaxy s20 ultra 5g device (the sm-g988b model) thanks