Is it possible to change CSC? - Samsung Galaxy S10e Questions & Answers

Hello,
I bought a Galaxy S10E SM-G970F in Germany in 2019 and I am using a German sim provider. However my phone has OXM CSC and shows as TPH (portuguese). That means eg. I cant use Samsung Pay in Germany. Does someone know a way to change my CSC to DBT? Thanks in advance

Bukaro said:
Hello,
I bought a Galaxy S10E SM-G970F in Germany in 2019 and I am using a German sim provider. However my phone has OXM CSC and shows as TPH (portuguese). That means eg. I cant use Samsung Pay in Germany. Does someone know a way to change my CSC to DBT? Thanks in advance
Click to expand...
Click to collapse
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!

kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!
Click to expand...
Click to collapse
Thanks, the first method worked fine

it will works for S10?
kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
Click to expand...
Click to collapse
will it work on the S10?

Yepp, someone who own a g973 reports that it works. Should work on any device.

So I will try in few minutes Wait for fedback
@kullanici32 Thanks a lot. First method works on g973
@hanspampel , you were right. I can confirm that works on g973
Thanks for both!!!

Hello!
Is there any way to change the CSC without resetting the phone? I used SamKEY on Android 10, but after my S10 got updated to Android 11 - it no longer works...

No. CSC changing contains a factory reset.

navy3dfx said:
Hello!
Is there any way to change the CSC without resetting the phone? I used SamKEY on Android 10, but after my S10 got updated to Android 11 - it no longer works...
Click to expand...
Click to collapse
As @hanspampel said no possible

Chimera tool can change your CSC without data loss. Not free though

You can also update firmware by USB flashing without losing data. After flashing, Device will reboot into Recovery, just click Reboot, do not wipe/factory reset.
If you can remove the "userdata.img" from the AP file with 7zip it will also work with ODIN flashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mujie said:
If you can remove the "userdata.img" from the AP file with 7zip it will also work with ODIN flashing.
Click to expand...
Click to collapse
How to do this actually? When I try to delete the file in 7zip it clearly warns 'not implemented':
In addition it warns that there is some data after payload data (which means 7zip actually might not support the architve type):
I'm using the latest 19.00 version of 7zip. Any other hints to flash with Odin? Thx!

xaweryp said:
How to do this actually? When I try to delete the file in 7zip it clearly warns 'not implemented':
View attachment 5213363
In addition it warns that there is some data after payload data (which means 7zip actually might not support the architve type):
View attachment 5213361
I'm using the latest 19.00 version of 7zip. Any other hints to flash with Odin? Thx!
Click to expand...
Click to collapse
Follow instructions in this link
Account Suspended
Ignore the hidden.img file, dont tamper with it. Just use the instructions to remove USERDATA.IMG and repack the firmware file with 7zip following those steps.

Hi,
thanks for a guide. Unfortunately this does not work for me (tried using both 7zip 19, and older/stable 16.04). Each time after repacking I get in Odin (3.14.4):
I beleve this is actually because of the payload data that's present in the original tar and mising after repacking.
Even for a testing purpose I just tried to extract and repack tar (without any changes) the error is there, sizes are different => thus payload is gone (might be it's just a md5 checksum after the end of archive):

xaweryp said:
Hi,
thanks for a guide. Unfortunately this does not work for me (tried using both 7zip 19, and older/stable 16.04). Each time after repacking I get in Odin (3.14.4):
View attachment 5219235
I beleve this is actually because of the payload data that's present in the original tar and mising after repacking.
Even for a testing purpose I just tried to extract and repack tar (without any changes) the error is there, sizes are different => thus payload is gone (might be it's just a md5 checksum after the end of archive):
View attachment 5219241
Click to expand...
Click to collapse
You could try to remove .MD5 from the file name and name it as XXXX.tar
Renaming the file to TAR extension will bypass the checksum analysis by Odin and it should flash normally.
Warning: If the file is still corrupt somehow you could softbrick your phone and will have to flash the full firmware file you downloaded to restore your device. Which will inevitably delete your data

mujie said:
Renaming the file to TAR extension will bypass the checksum analysis by Odin and it should flash normally.
Click to expand...
Click to collapse
Thanks a lot for your help! This worked with no issues indeed

mujie said:
You can also update firmware by USB flashing without losing data. After flashing, Device will reboot into Recovery, just click Reboot, do not wipe/factory reset.
If you can remove the "userdata.img" from the AP file with 7zip it will also work with ODIN flashing.View attachment 5201295
Click to expand...
Click to collapse
I removed the userdata.img than used odin to flash the firmware but csc did not change

wadialdoor said:
I removed the userdata.img than used odin to flash the firmware but csc did not change
Click to expand...
Click to collapse
CSC change is easily done with paid tools like CHIMERA and Z3X

i bought a s10e about 4 weeks ago. on this device: SAOMC_SM-G970F_CKH_HTS_RR_007 HTS/HTS,HTS/HTS.
no idea how this came to germany. the goal: conversion to DBT, Magisk, TWRP and LOS.
first step: download Samfw.com_SM-G970F_DBT_G970FXXSEFUL1_fac.zip, the last Firmware DBT Android 11.
Samfw is one of more Server, use your own preferred.
the next firmware is with Android 12 (not need why LOS A 12 is beta avalaible).
next step: Odin flash AB, BL, CP, CSC from this FW(FUL1).
now Phone have DBT/DBT/,DBT/HTS.
this is STATE from Jan. 2022
it is important to have the FW on the PC.
for everything that is flashed afterwards and ends in error you can get
the phone running again with Odin flash firmware.
even a green-screen (don't be irritated - this is also the download-mode) is not possible.
it took me 3..5 times to start all over again in next step.
next step is Magisk, TWRP and LOS. this is here OT and following as new HoTo

kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!
Click to expand...
Click to collapse
Tried the first method, but it only let's me select from few specific cscs(about half of them I couldn't find on the internet, and those that I did find are from south American countries - which isn't helpful to me I want my servive provider csc or at least some European country). What could be the cause of this? This is on my s20 ultra 5g device(sm-g988b)
kullanici32 said:
1.install google phone: https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=tr&gl=US
2.enter code: *#*#27262826#*#*
Select if the csc you're looking for.
3.choose the csc you want
4.install
5.sales netword code change
6.ok
7. ATTENTİON!! will be reset to factory settings!
get a backup.
if not:
Download Samsung Galaxy S10e SM-G970F firmware
Download the latest Samsung firmware for Galaxy S10e with model code SM-G970F. Check out our free download or super fast premium options.
www.sammobile.com
download multi csc (thailand or turkey and so on) from here, flash it with odin.
After flashing with Odin, install normal csc file, don't use home csc!
the device will be reset. Once it opens, try the above steps again
AT YOUR OWN RİSK!
Click to expand...
Click to collapse
I tried the first method but it doest not give me the csc of my service provider (or at least my country or any other European country) - it only gives me the option to switch to unknown cscs or those of south American countries which isnt helpful to me. Any idea what could be the cause of this issue and how to fix it? This is ony my samsung galaxy s20 ultra 5g device (the sm-g988b model) thanks

Related

Rooting and twrp for sm-j120h samsung j1 2016

Root j120h/ds
for some reasons that i dont know there are different variants of j1 2016, mine is j120h which is a spreadtrum sc7727se phone while others have j120f exynos soc, so this tut only works for j120h models of j1 2016
Req TWRP, ODIN, SAMSUNG DRIVERS, FLASHABLE SUPERSU, OEM UNLOCK ENABLED ON DEVELOPER OPTIONS.
DOWNLOAD
UPDATE: SUPERSU INSIDE FILE WONT WORK AND WILL CAUSE BOOTLOOPs ON DEVICES WITH UPDATED SELINUX SECURITY PATCH
USE THIS FLASHABLE SU.
http://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
always use chainfire's latest flashable zip
the file above includes flashable supersu.zip odin 3.11 and TWRP (do not extract supersu zip)
1. DOWNLOAD TWRP AND ODIN AND SUPERSU.ZIP. extract all except supersu.zip do not extract supersu.zip
(NOTE PUT SUPERSU.ZIP INSIDE INTERNAL STORAGE THIS TWRP BUILD DOES NOT DETECT EXTERNAL MMC, so anything you flash in the future make sure its in internal storage
1. install samsung drivers
2. open odin click AP then select TWRP file
3. Click options UNCHECK auto restart
4. Put phone in odin mode Volume down + Home key + power key
5. there will be a warning press volume up to continue
6. insert usb cable wait for drivers to finis installing
7. check status (see blue box above that means phone is ready)
8. Click Start to start flashing
9. after flash there will be a green sign saying pass
10. remove usb cable DO NOT restart phone. Restarting phone will revert recovery back to stock.
11. After ypu finished flashing you cannot power off the device via power button so remove battery then insert. do not turn it on.
12. then go to recovery mode by pressing volume up + homekey + power on,
13 flash supersu.zip should be inside internal storage preferably on root directory of internal storage
14. reboot and wait, 1st boot will take time.
15. congratulations you are now rooted and warranty is now void.
16. Odin problem? search on google about issues on stuck at pit file mapping.
17. phone not detected? download and install smartswitch from samsung.com run it then connect phone if detected, go back to odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Please always enable oem unlock at all times when you have twrp installed. i tried resetting my phone once and ended up with binary blocked and cannot boot up
Disclaimer: I am not responsible for whatever you do to your phone
if you encounter bootloops while tinkering with your phone just search for official firmware from reputable sites and flash it thru odin. Google is your friend
Big credits to Joenka of 4pda.ru and others for letting me see the link to j1 2016's device tree. To j1 2016 ph group
chainfire and odin creators thank you.
:good::good::good::good:
Mabuhay Pilipinas!
Thanks for this
iistoryahi said:
Thanks for this
Click to expand...
Click to collapse
welcome
the download file says its a .rar file but when I download it, it is an .exe file.
thank you so much! email me so that i can send back my gratitude!
pokamonNereid said:
the download file says its a .rar file but when I download it, it is an .exe file.
Click to expand...
Click to collapse
try other browsers or try dloading on pc. sometimes it happens with datafilehost. enable adblock before downloading
misterjam said:
thank you so much! email me so that i can send back my gratitude!
Click to expand...
Click to collapse
thank you
4ld0u5 said:
Root j120h/ds
for some reasons that i dont know there are different variants of j1 2016, mine is j120h which is a spreadtrum sc7727se phone while others have j120f exynos soc, so this tut only works for j120h models of j1 2016
Req TWRP, ODIN, SAMSUNG DRIVERS, FLASHABLE SUPERSU, OEM UNLOCK ENABLED ON DEVELOPER OPTIONS.
DOWNLOAD
UPDATE: SUPERSU INSIDE FILE WONT WORK AND WILL CAUSE BOOTLOOPs ON DEVICES WITH UPDATED SELINUX SECURITY PATCH
USE THIS FLASHABLE SU.
http://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
always use chainfire's latest flashable zip
the file above includes flashable supersu.zip odin 3.11 and TWRP (do not extract supersu zip)
1. DOWNLOAD TWRP AND ODIN AND SUPERSU.ZIP. extract all except supersu.zip do not extract supersu.zip
(NOTE PUT SUPERSU.ZIP INSIDE INTERNAL STORAGE THIS TWRP BUILD DOES NOT DETECT EXTERNAL MMC, so anything you flash in the future make sure its in internal storage
1. install samsung drivers
2. open odin click AP then select TWRP file
3. Click options UNCHECK auto restart
4. Put phone in odin mode Volume down + Home key + power key
5. there will be a warning press volume up to continue
6. insert usb cable wait for drivers to finis installing
7. check status (see blue box above that means phone is ready)
8. Click Start to start flashing
9. after flash there will be a green sign saying pass
10. remove usb cable DO NOT restart phone. Restarting phone will revert recovery back to stock.
11. After ypu finished flashing you cannot power off the device via power button so remove battery then insert. do not turn it on.
12. then go to recovery mode by pressing volume up + homekey + power on,
13 flash supersu.zip should be inside internal storage preferably on root directory of internal storage
14. reboot and wait, 1st boot will take time.
15. congratulations you are now rooted and warranty is now void.
16. Odin problem? search on google about issues on stuck at pit file mapping.
17. phone not detected? download and install smartswitch from samsung.com run it then connect phone if detected, go back to odin.
Note: Please always enable oem unlock at all times when you have twrp installed. i tried resetting my phone once and ended up with binary blocked and cannot boot up
Disclaimer: I am not responsible for whatever you do to your phone
if you encounter bootloops while tinkering with your phone just search for official firmware from reputable sites and flash it thru odin. Google is your friend
Big credits to Joenka of 4pda.ru and others for letting me see the link to j1 2016's device tree. To j1 2016 ph group
chainfire and odin creators thank you.
:good::good::good::good:
Mabuhay Pilipinas!
Click to expand...
Click to collapse
hi bro
not working ext sd card or otg . how to fix it . iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
j120f Twrp Recovery And Root
Info And Download Recovery TWRP and Root Hare: http://forum.xda-developers.com/and...-galaxy-j1-t3444010/post68282110#post68282110
javad490 said:
Info And Download Recovery TWRP and Root Hare: http://forum.xda-developers.com/and...-galaxy-j1-t3444010/post68282110#post68282110
Click to expand...
Click to collapse
Your rooting tutorial link is for j120f.
this tutorial is for j120h
4ld0u5 said:
Your rooting tutorial link is for j120f.
this tutorial is for j120h
Click to expand...
Click to collapse
OK,But some Person Search for j120F Custom recovery and Root,also Hare:
4ld0u5 said:
mine is j120h which is a spreadtrum sc7727se phone while others have j120f exynos soc, so this tut only works for j120h models of j1 2016
Click to expand...
Click to collapse
j120F and j120H is Similar Device,but j120F Support 4G LTE network
The download file is a .exe. I tried to use other browser but it is also an .exe.
Please help me.
anitamobile said:
hi bro
not working ext sd card or otg . how to fix it . iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
Click to expand...
Click to collapse
i think theres a twrp released with ext storage support. just find it.
or you can create a flashable zip of whatever you wnt to place or modify ur system and flash it via this twrp.
can we get a mirror of this... file is not downloadable in chrome the site says and other browsers want to download an exe file... seems.. untrustworthy
successfully rooted. thank you po. mayroon po ba kayong flashable framework-res.apk na naka zip file pra sa J120H/DS. flashable via recovery. needed lang po sir. pahingi po. thanks in advance. God bless
Bro how fix ext sdcard
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
thank you for mach
Fixed TWRP installation for those having trouble detecting extSdCard in OPs realease can be found here:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
Help.
So........... I did everything to before flashing super su....but when I try boot recovery, red text at the top of my screen says RECOVERY IS NOT SEANDROID ENFORCING. and it stay like that forever until I take battery out...what do I do!?!?

I want to sell my S6 Edge need original stock rom?!

Hello guys, im going to sell my S6 Edge and get an S7 Edge at a good price...im doing this mainly because the S7 edge has more battery and thats all really..
The point is that i want to flash a stock rom before selling my s6e...im from italy my phone is not branded and is the international version the G925F....Where do i find the right stock rom? i want to flash a Stock rom with 3 files cause right now i have btu csc and i want to put everything as it was when i got the phone with italian csc etc...so who ever buys it can update it normally...
SamFirm > Binary Nature > Odin + re-Partition > You're done
iDroid27210 said:
SamFirm > Binary Nature > Odin + re-Partition > You're done
Click to expand...
Click to collapse
Can you explain it better? I dont know where to find the right stock firmware from italy and not branded..
Use this tool (not the website !) : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Once you opened it, fill the boxes :
Model : SM-G925F (S6 edge int.)
Region : ITV (Italy unbranded)
Check Binary Nature box then Check Updates
Then uncheck Check CRC32 and check Decrypt automatically and do DOWNLOAD
(now wait because 2.5GB could take time ~)
When "Decryption finished." appears, close SamFirm then extract the ZIP archive in your documents (delete the enc file).
With the latest Odin version (3.12.3 available here : https://forum.xda-developers.com/showthread.php?t=2711451)
Download the S6 edge PIT here : https://mega.nz/#!9A4hQD7T!NIG6GXH40pGUP6kfWMF0WnXxLXMqQybfo4FOheu0rn8
In Odin, fill BL, AP, CP and CSC by the files you extracted.
Then go on PIT and select the PIT you downloaded.
On options, ensure that these options are checked :
Auto Reboot
F. Reset Time
Re-Partition
Nand Erase All
Then, put your phone into download mode and start flashing !
iDroid27210 said:
Use this tool (not the website !) : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Once you opened it, fill the boxes :
Model : SM-G925F (S6 edge int.)
Region : ITV (Italy unbranded)
Check Binary Nature box then Check Updates
Then uncheck Check CRC32 and check Decrypt automatically and do DOWNLOAD
(now wait because 2.5GB could take time ~)
When "Decryption finished." appears, close SamFirm then extract the ZIP archive in your documents (delete the enc file).
With the latest Odin version (3.12.3 available here : https://forum.xda-developers.com/showthread.php?t=2711451)
Download the S6 edge PIT here : https://mega.nz/#!9A4hQD7T!NIG6GXH40pGUP6kfWMF0WnXxLXMqQybfo4FOheu0rn8
In Odin, fill BL, AP, CP and CSC by the files you extracted.
Then go on PIT and select the PIT you downloaded.
On options, ensure that these options are checked :
Auto Reboot
F. Reset Time
Re-Partition
Nand Erase All
Then, put your phone into download mode and start flashing !
Click to expand...
Click to collapse
Isnt there an easier way? it says that tool is deprecated, i downloaded the latest rom from updato http://updato.com/firmware-archive-select-model?record=31F6CFE2AE0E11E6B04AFA163EE8F90B...what do i need to do now?
It's not. You downloaded the one part firmware, which not contains all parts of the full firmware. Download the Binary Version though SamFirm, that isn't deprecated (just an dishonnest advertisement for his new firm website).
iDroid27210 said:
It's not. You downloaded the one part firmware, which not contains all parts of the full firmware. Download the Binary Version though SamFirm, that isn't deprecated (just an dishonnest advertisement for his new firm website).
Click to expand...
Click to collapse
Thanks bro, everything worked perfectly...your amazing man :good::good:
I just had a problem with the net framework 3.5 installation, i have my windows updates disabled and had to enable it to install net framework 3.5 so i can use the samfirm tool...
now i just hope someone will buy my s6edge as fast as possible. :fingers-crossed:

How To Guide Root for all Exynos 850 devices.

Root for all Exynos 850 devices.
A. Root part 1 - Preparing the file
I accept no responsibility for bricked phones but I will help you to recover.
1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com or https://www.samfirmware.net/ or https://www.full-repair-firmware.com/search?q=A20 or
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Samsung Firmware Download - Lastest official firmware update​Samsung Firmware Download Official and fast update Lastest and old version Max speed and free download Best Samsung Galaxy website
samfw.com
2. Download patched magisk
3. Use zarchiver to extract the apxxxxxx....md5 section from the firmware.
4. Use patched magisk to patch the ap section. Allow the extra files.
Click on install and select patch file.
The output will be a patched tar file.
B. To Unlock Bootloader
1. Activate developer options by going to settings, about phone, software information and tapping on build number 7 times.
On phone developer options in settings allow OEM unlocking and enable usb debugging by moving both
sliders RIGHT
If you don't see the OEM unlock
-Disable Auto System Update
-Then disable Automatic date and time (Found in General Management) > then set the time back 14 days
- Connect to the internet
-Go to software update then check for update and wait a long time till it registers the device on server
-Once it's registered the OEM Unlock should be visible in the Developer Options
then connect phone to PC
2. Reboot into download mode by holding down both Vol up and Vol down
(You might need to long press vol up to unlock bootloader)
then press vol up to continue
Reboot and skip through the setup process.
C. Root part 2
Reboot into download mode again
6. Flash the patched ap tar file using special Odin.
https://forum.xda-developers.com/attachments/odin3-v3-14-1_3b_patched-zip.5158507/
(Click on the ap button and choose the patched tar file. Press start)
7. Reboot.
8. Skip all the way through the set-up process.
I successfully rooted my SM-A127F U3 with this manual. There are two problems.
USB tethering to Debian 10 and Ubuntu 20.04 is broken after rooting.
Second problem is that I can't update my service provider.
First time rooting I replaced only the AP. Later I tried replacing everything. Once with CSC and once with HOME_CSC nothing works. When I patch with the original AP there is no CID manager problem. Tethering I didn't try
Usbtt said:
I successfully rooted my SM-127F U3 with this manual. There are two problems.
USB tethering to Debian 10 and Ubuntu 20.04 is broken after rooting.
Second problem is that I can't update my service provider.
First time rooting I replaced only AP. Later I tried replacing everything. Once with CSC and once with HOME_CSC nothing works. When I patch with the original AP there is no CID manager problem. Tethering I didn't try
Click to expand...
Click to collapse
Interesting.
Exynos 850 Resources
A127 M127 F127 A135 M135 A217 A047
t.me
Rooting with magisk is better option
@Malware said:
Rooting with magisk is better option
Click to expand...
Click to collapse
Yes.
A patched magisk is needed for this device.
2. Download patched magisk
3. Use zarchiver to extract the apxxxxxx....md5 section from the firmware.
4. Use patched magisk to patch the ap section. Allow the extra files.
Click on install and select patch file.
The output will be a patched tar file.
This method will give a patched vbmeta so twrp will then work properly.
physwizz said:
Yes.
A patched magisk is needed for this device.
2. Download patched magisk
3. Use zarchiver to extract the apxxxxxx....md5 section from the firmware.
4. Use patched magisk to patch the ap section. Allow the extra files.
Click on install and select patch file.
The output will be a patched tar file.
This method will give a patched vbmeta so twrp will then work properly.
Click to expand...
Click to collapse
Bruh, no. I mean yes one can root that way but a developer of magisk suggest not to use this way instead patch boot.img for your device using magisk and then flash it.
@Malware said:
Bruh, no. I mean yes one can root that way but a developer of magisk suggest not to use this way instead patch boot.img for your device using magisk and then flash it.
Click to expand...
Click to collapse
That will work but it doesn't give you a patched vbmeta.
So custom recovery gives an error
physwizz said:
That will work but it doesn't give you a patched vbmeta.
So custom recovery gives an error
Click to expand...
Click to collapse
Ig no.......
is there any android 12 patched magisk
please send without telegram link
TheWorldYT said:
is there any android 12 patched magisk
please send without telegram link
Click to expand...
Click to collapse
Yes
how to update magisk?
pando345 said:
how to update magisk?
Click to expand...
Click to collapse
Install the apk
physwizz said:
Root for all Exynos 850 devices.
A. Root part 1 - Preparing the file
I accept no responsibility for bricked phones but I will help you to recover.
1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com or https://www.samfirmware.net/ or https://www.full-repair-firmware.com/search?q=A20 or
Samsung Firmware Download - Lastest official firmware update​Samsung Firmware Download Official and fast update Lastest and old version Max speed and free download Best Samsung Galaxy website
samfw.com
2. Download patched magisk
3. Use zarchiver to extract the apxxxxxx....md5 section from the firmware.
4. Use patched magisk to patch the ap section. Allow the extra files.
Click on install and select patch file.
The output will be a patched tar file.
B. To Unlock Bootloader
1. Activate developer options by going to settings, about phone, software information and tapping on build number 7 times.
On phone developer options in settings allow OEM unlocking and enable usb debugging by moving both
sliders RIGHT
If you don't see the OEM unlock
-Disable Auto System Update
-Then disable Automatic date and time (Found in General Management) > then set the time back 14 days
- Connect to the internet
-Go to software update then check for update and wait a long time till it registers the device on server
-Once it's registered the OEM Unlock should be visible in the Developer Options
then connect phone to PC
2. Reboot into download mode by holding down both Vol up and Vol down
(You might need to long press vol up to unlock bootloader)
then press vol up to continue
Reboot and skip through the setup process.
C. Root part 2
Reboot into download mode again
6. Flash the patched ap tar file using special Odin.
https://forum.xda-developers.com/attachments/odin3-v3-14-1_3b_patched-zip.5158507/
(Click on the ap button and choose the patched tar file. Press start)
7. Reboot.
8. Skip all the way through the set-up process.
Click to expand...
Click to collapse
Will this a21s file work for m12 also?
Star_xda said:
Will this a21s file work for m12 also?
Click to expand...
Click to collapse
Use delta magisk
physwizz said:
Use delta magisk
Click to expand...
Click to collapse
Can I do this without losing Data?
Star_xda said:
Can I do this without losing Data?
Click to expand...
Click to collapse
Yes
physwizz said:
Yes
Click to expand...
Click to collapse
Just tried but no luck. I flashed by bootloader but it was stuck at sending boot.img
Star_xda said:
Just tried but no luck. I flashed by bootloader but it was stuck at sending boot.img
Click to expand...
Click to collapse
Follow instructions exactly
physwizz said:
Yes
Click to expand...
Click to collapse
I am having issue rooting my samsung m12. The magisk is unable to patch the AP. Screenshot for reference. Please help me fix the issue.
mdbshuvo said:
I am having issue rooting my samsung m12. The magisk is unable to patch the AP. Screenshot for reference. Please help me fix the issue.
View attachment 5874391
View attachment 5874393
Click to expand...
Click to collapse
you must use delta magisk

Question Anybody knows when could we root?

Hello guys. Does anybody know when would we be able to root our beloved Flip 4? I haven't seen any thread for it. Is there something that's blocking the devs from discovering a root method? Just trying to understand.
Thanks!
shreyas.kukde said:
Hello guys. Does anybody know when would we be able to root our beloved Flip 4? I haven't seen any thread for it. Is there something that's blocking the devs from discovering a root method? Just trying to understand.
Thanks!
Click to expand...
Click to collapse
Probably just need to wait for John Woo (developer of magisk) to update it for the fold and flip 4 series. You can try asking in the magisk forums if anyone knows anything.
if you can unlock the bootloader (not possible on the US versions) download the stock firmware and transfer the AP file to your phone.
then install magisk and patch the AP file, transfer back and odin flash the patched file and you should have root.
beanbean50 said:
if you can unlock the bootloader (not possible on the US versions) download the stock firmware and transfer the AP file to your phone.
then install magisk and patch the AP file, transfer back and odin flash the patched file and you should have root.
Click to expand...
Click to collapse
Well unfortunately I'm not that expert as to discover how to unlock bootloader myself. But I guess the expert guys could help us if they would like to.
shreyas.kukde said:
Well unfortunately I'm not that expert as to discover how to unlock bootloader myself. But I guess the expert guys could help us if they would like to.
Click to expand...
Click to collapse
if you can get into the development options in settings you should be able to see OEM unlock toggle but be warned if you choose it it will wipe all your data..!
1) go into settings/about phone
2) then software information tap on build number 7 times
3) go back to settings and you should see development options at the bottom
4) if the OEM unlock is there choose it and it will reboot to the bootloader screen
5) it will then ask you do you really want to unlocck it, if you choose to yes it wipe all data and you have to start from scratch re-installing everything
6) download the latest firmware and extract it to a new folder on your PC
7) copy the AP file to your phone
8) download and install the latest Magisk apk
9) in Magisk choose the top option 'install' then select patch a file
10) after patching transfer the file back to your PC (it can be found in the download file on your phone)
11) download and install Odin on your PC
12) open Odin and put the AP patched file in the AP slot and the CSC file in the CSC slot
13) after flashing and rebooted install the Magisk app again and it should confirm being rooted after Magisk reboots the phone
beanbean50 said:
1) go into settings/about phone
2) then software information tap on build number 7 times
3) go back to settings and you should see development options at the bottom
4) if the OEM unlock is there choose it and it will reboot to the bootloader screen
5) it will then ask you do you really want to unlocck it, if you choose to yes it wipe all data and you have to start from scratch re-installing everything
6) download the latest firmware and extract it to a new folder on your PC
7) copy the AP file to your phone
8) download and install the latest Magisk apk
9) in Magisk choose the top option 'install' then select patch a file
10) after patching transfer the file back to your PC (it can be found in the download file on your phone)
11) download and install Odin on your PC
12) open Odin and put the AP patched file in the AP slot and the Home CSC in the CSC slot
13) after flashing and rebooted install the Magisk app again and it should confirm being rooted after Magisk reboots the phone
Click to expand...
Click to collapse
Wow. Are you rooted?
yes, rooted on the flip 3 but it will work on the flip 4 aswell. I know it looks quite difficult at first but it does become easier after doing it a few times
beanbean50 said:
yes, rooted on the flip 3 but it will work on the flip 4 aswell. I know it looks quite difficult at first but it does become easier after doing it a few times
Click to expand...
Click to collapse
I'm not able to get past the step #3 on this phone, its locked down.
Can access recovery but the "wipe data" option is removed.
Any advice? It's a demo unit with an IMEI number I kinda got scammed into buying, trying ot figure out if its a lost cause.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ankur079 said:
I'm not able to get past the step #3 on this phone, its locked down.
Can access recovery but the "wipe data" option is removed.
Any advice? It's a demo unit with an IMEI number I kinda got scammed into buying, trying ot figure out if its a lost cause.
View attachment 5707965
Click to expand...
Click to collapse
if you have the US version then it's mission impossible
beanbean50 said:
if you have the US version then it's mission impossible
Click to expand...
Click to collapse
Because it's a new-er device or just never gonna happen? I even made a call using my SIM to check all is well.
ankur079 said:
Because it's a new-er device or just never gonna happen? I even made a call using my SIM to check all is well.
Click to expand...
Click to collapse
unfortunately all US phones are bootloader locked
that's annoyingly unfortunate. I suppose i'm out 750 bucks, gonna file a police report if nothing else, what an uncool guy.
not true. root will come for t mobile and unlocked versions
Jmoney55 said:
not true. root will come for t mobile and unlocked versions
Click to expand...
Click to collapse
not true. when they say unlocked versions nowadays in the US they are referring to carrier unlocked
beanbean50 said:
1) go into settings/about phone
2) then software information tap on build number 7 times
3) go back to settings and you should see development options at the bottom
4) if the OEM unlock is there choose it and it will reboot to the bootloader screen
5) it will then ask you do you really want to unlocck it, if you choose to yes it wipe all data and you have to start from scratch re-installing everything
6) download the latest firmware and extract it to a new folder on your PC
7) copy the AP file to your phone
8) download and install the latest Magisk apk
9) in Magisk choose the top option 'install' then select patch a file
10) after patching transfer the file back to your PC (it can be found in the download file on your phone)
11) download and install Odin on your PC
12) open Odin and put the AP patched file in the AP slot and the Home CSC in the CSC slot
13) after flashing and rebooted install the Magisk app again and it should confirm being rooted after Magisk reboots the phone
Click to expand...
Click to collapse
I own a Flip 4 from Austria and can confirm your described method works, except I had to use CSC —> CSC instead of the Home CSC, cause it didn’t boot before.
Google Wallet (ex Pay) works with Magisk Props module as well!
Plazza86 said:
I own a Flip 4 from Austria and can confirm your described method works, except I had to use CSC —> CSC instead of the Home CSC, cause it didn’t boot before.
Google Wallet (ex Pay) works with Magisk Props module as well!
Click to expand...
Click to collapse
Glad it all went well for you, it's quite a learning curve at first..!
I've edited my 'how to' about the CSC file thanks
Jmoney55 said:
not true. root will come for t mobile and unlocked versions
Click to expand...
Click to collapse
Sure it will. Just pay $150 and let some unknown asshole remote into your device.
This info came out today, but I have the unlocked version that I bought directly from samsung (U1) and I can confirm that I cannot "OEM Unlock" my Flip4.
Samsung uploads Galaxy Z Flip 4 and Fold 4 kernel sources to the joy of ROM makers
The Galaxy Z Flip 4 and Fold 4 are going open source:
www.androidpolice.com
good evening @
shreyas.kukde @​jdenman03 @​entropism @​beanbean50 @​Plazza86 @​Jmoney55 @​ankur079 @​Philnicolls89​, I have just bought the Samsung Galaxy Z Flip 4 in Europe (France) and indeed to ROOT it you have to put the Tarmd5 AP file in the AP box and the CSC file (and not Home CSC) in the CSC box to that everything works fine, when the phone restarts, you have to reinstall Magisk and everything is OK. Thanks for this tutorial, hope it helps other people.

How To Guide [DEPRECATED] TWRP/GSI for Android 12 firmware

DEPRECATED GUIDE
INSTEAD USE Could-Chaplain's TWRP 12.1 v2.00.1-alpha+
This is a solution for those, like me, who let their phone upgrade to Android 12 and can't downgrade to A11.
It's base on Could-Chaplain's TWRP for A11 firmware (great thanks to you sir). I'm not a developer, it's just a makeshift job.
Base on :
TWRP v1.02.2-alpha
Firmware ("Build version") : A226BXXU5BVH2 (works even if you have another firmware version in your phone as long as it's an A12)
Of course, all of this is at your own risk. I am not responsible for lost warranty, lost data or any other damage to your device, neither for blowing the bridge on the river Kwaï.
How to root and flash TWRP :
Prerequisites :
Unlock Bootloader
Odin on PC
1. Reboot device to Download Mode (longpres vol+ / vol- and plug USB cable)
2. Download the magisk_a226b_boot.tar and the twrp12_a226b_recovery.tar from attachments
3. Start Odin on PC
4. In Odin press on Options and untick Auto Reboot
5. Flash magisk_a226b_boot.tar with Odin (In Odin click on AP, select the magisk_boot.tar and press start)
(It roots you phone, if you don't want go directly to step 7 with blank vbmeta.img (in magisk_a226b_boot.tar) in USERDATA slot (don't forget to TAR vbmeta.img).)
6. After flash magisk_a226b_boot.tar without errors press in Odin on Reboot download if possible, device reboots to Download Mode
7. Flash twrp12.1_a226b_recovery.tar with Odin (In Odin click on AP, select the twrp12.1_a226b_recovery.tar and press start)
8. If all is flashed without errors longpress power and vol- on device
9. (The most complicated part, if it doesn't work restart from step 1. For me it seems to be easier if Auto Reboot is tick in Odin Options before step 7, in this case no step 8, be quick.)
Instantly after device goes Blackscreen press and hold power and vol+ for 5-8 seconds to boot to TWRP
10. In TWRP press on Advanced, than on Terminal, write "multidisabler" and press on the blue button
11. Repeat step 10
12. Go back in TWRP main menu, press on Wipe then on Format data, type "yes" and press on the blue button.
12. Go back in TWRP main menu, press on Reboot, then on Recovery
How to flash GSI :
Prerequisites :
TWRP on your phone
adb/fastboot on your PC
1. Boot to TWRP
2. In TWRP press Wipe, Advanced Wipe, select Dalvik, data, cache and swipe to wipe
2. After wipe go back to main screen and press Reboot, then press Fastboot
3. Device reboots to TWRP with Fastboot Interface
4. Now plugin device to PC and open a terminal
5. Type : fastboot devices
6. If device is found type : fastboot flash system PATH/TO/YOUR/GSI.img
Ignore "Invalid sparse file format at header magic" message
7. After flash completed without errors type : fastboot reboot
Tested GSI (list) : crDroid 8.10 (A12) and LineageOS 20 TD-based (A13) both vanilla with MinMicroG release, work fine (but no 5G and no VoLTE/VoWifi).
After GSI installation, if you haven't internet on apps, refer to this post for explanation/workaround of a MediaTek-specific kernel bug.
If you want to hide unlocked bootloader warning (rooted phone only) go here AND here.
Feel free to report your failures and successes for everyone's benefit.
Credits (thanks to all of you) :
Could-Chaplain for TWRP11 A226B (special thanks for your work)
Williamtung for the guide to Magisk's root boot.img here
SoftnGeek for explanations to transform TWRP11 to TWRP12 here
osm0sis for Android Image Kitchen here
Cheese-ass for this guide here
AndyYan for apps internet problem solving
razs.originals and kevinARIAN21 for warning bootloader hiding solution
Do I need to flash anything else in odin with magisk and twrp like bl, cp etc or vbmeta ?
RoryTheNoncingCar said:
Do I need to flash anything else in odin with magisk and twrp like bl, cp etc or vbmeta ?
Click to expand...
Click to collapse
No just flash Magisk boot (vbmeta is include in magisk_a226b_boot.tar) in AP slot then click in Odin on Try to reboot download and after reboot, flash TWRP recovery in AP too.
For my phone, it worked like this.
can i use this on A226BXXU5BVH3 ?
KOROZILA said:
can i use this on A226BXXU5BVH3 ?
Click to expand...
Click to collapse
It depends. A226BXXU5BVH3 is MODEM/CP version. If your PDA/AP version is A226BXXU5BVH2, it's good. Otherwise I'm not sure it will work, I didn't try so I don't know. You can try and if it doesn't work see the Credits part of the post to create TWRP for your AP version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KOROZILA said:
can i use this on A226BXXU5BVH3 ?
Click to expand...
Click to collapse
Did you try? I also have the same version.
Hkd6010 said:
Did you try? I also have the same version.
Click to expand...
Click to collapse
A226BXXU5BVH3 is a "Basebande version", it isn't the good information to watch.
A226BXXU5BVH2 is a "Build number", you need this information.
You can also watch "Android security update". A226BXXU5BVH2 "Build number" corresponding to 1 July 2022 "Android security version".
Go to Parameter/About device/Software informations
As you can see on a colleague's phone screenshot he has A226BXXU5BVH3 "Basebande version" and A226BXXS5BVI6 "Build version" (corresponding to 1 September 2022 "Android security update").
If you have A226BXXU5BVH2 as "Build number", it's good.
If you have A226BXXS5BVI6 or A226BXXS5BVJ2 (depends of your country/operator) as "Build number", I'm pretty sure the process works, cause it's Android 12 too, but I didn't try.
In this case, if you don't want to risk, you can downgrade to A226BXXU5BVH2 "Build number" with Odin (explanation here).
I found a gsi for Cherish OS but there are many downloads for different versions of this GSI do I have to download a specific one or I can use the one I want
xXLoulouXx said:
I found a gsi for Cherish OS but there are many downloads for different versions of this GSI do I have to download a specific one or I can use the one I want
Click to expand...
Click to collapse
As long as it's an ab and arm64 version, it will be fine. Googled or vanilla, read only or read-write system, with or without superuser, ...as you want.
If you choose one of these CherishOS A12 or A13, all releases seem to be possible.
ttritium said:
A226BXXU5BVH3 is a "Basebande version", it isn't the good information to watch.
A226BXXU5BVH2 is a "Build number", you need this information.
You can also watch "Android security update". A226BXXU5BVH2 "Build number" corresponding to 1 July 2022 "Android security version".
Go to Parameter/About device/Software informations
View attachment 5767847
As you can see on a colleague's phone screenshot he has A226BXXU5BVH3 "Basebande version" and A226BXXS5BVI6 "Build version" (corresponding to 1 September 2022 "Android security update").
If you have A226BXXU5BVH2 as "Build number", it's good.
If you have A226BXXS5BVI6 or A226BXXS5BVJ2 (depends of your country/operator) as "Build number", I'm pretty sure the process works, cause it's Android 12 too, but I didn't try.
In this case, if you don't want to risk, you can downgrade to A226BXXU5BVH2 "Build number" with Odin (explanation here).
Click to expand...
Click to collapse
Thanks for the reply. Yes, I have the exact same version mentioned in your screenshot. I am gonna download A226BXXU5BVH2 version firmware from Sammobile and then will try to flash TWRP as given above. Correct?
Hkd6010 said:
Thanks for the reply. Yes, I have the exact same version mentioned in your screenshot. I am gonna download A226BXXU5BVH2 version firmware from Sammobile and then will try to flash TWRP as given above. Correct?
Click to expand...
Click to collapse
Correct.
With A226BXXU5BVH2 version, it's sure the process works.
But with A226BXXS5BVI6 version, I'm 90% sure it works (cause I didn't try). If you want to try and reply the result after, it's wonderful (if it don't work, you just have to flash A226BXXU5BVH2 with odin, so it's not very risky but very kind for all).
ttritium said:
Correct.
With A226BXXU5BVH2 version, it's sure the process works.
But with A226BXXS5BVI6 version, I'm 90% sure it works (cause I didn't try). If you want to try and reply the result after, it's wonderful (if it don't work, you just have to flash A226BXXU5BVH2 with odin, so it's not very risky but very kind for all).
Click to expand...
Click to collapse
I have tried this process on A226BXXS5BVI6 and it worked fine. I did't have to downgrade to A226BXXU5BVH2. Thanks very much.
Hkd6010 said:
I have tried this process on A226BXXS5BVI6 and it worked fine. I did't have to downgrade to A226BXXU5BVH2. Thanks very much.
Click to expand...
Click to collapse
Thanks.
I modified the explanations to take this information into account.
ttritium said:
As long as it's an ab and arm64 version, it will be fine. Googled or vanilla, read only or read-write system, with or without superuser, ...as you want.
If you choose one of these CherishOS A12 or A13, all releases seem to be possible.
Click to expand...
Click to collapse
thank you very much
Also I tried the Cherish GSIs you linked but when I do "fastboot flash system gsi.img" it says "Invalid sparse file format at header magi" (not magic or something it really says "magi") can you help me (again) I'm pretty new to all this samsung stuff and GSIs
xXLoulouXx said:
Also I tried the Cherish GSIs you linked but when I do "fastboot flash system gsi.img" it says "Invalid sparse file format at header magi" (not magic or something it really says "magi") can you help me (again) I'm pretty new to all this samsung stuff and GSIs
Click to expand...
Click to collapse
I'm sorry but I'm not a specialist (newbie too) and I never seen this so I don't know.
Maybe you GSI.img is corrupted, try to download and uncompress it again.
I also advise you to begin the process again (or just flash from TWRP) with the new Could-Chaplain's TWRP 12.1 v2.00.1-alpha instead of my twrp12.1_a226b_recovery.tar which is just a makeshift job.
Touch dosent work is there a fix for this?
elosanta said:
Touch dosent work is there a fix for this?
Click to expand...
Click to collapse
Sorry no fix for this.
Try with TWRP v2.00.1-alpha.
ttritium said:
Sorry no fix for this.
Try with TWRP v2.00.1-alpha.
Click to expand...
Click to collapse
thank you!

Categories

Resources