Root j120h/ds
for some reasons that i dont know there are different variants of j1 2016, mine is j120h which is a spreadtrum sc7727se phone while others have j120f exynos soc, so this tut only works for j120h models of j1 2016
Req TWRP, ODIN, SAMSUNG DRIVERS, FLASHABLE SUPERSU, OEM UNLOCK ENABLED ON DEVELOPER OPTIONS.
DOWNLOAD
UPDATE: SUPERSU INSIDE FILE WONT WORK AND WILL CAUSE BOOTLOOPs ON DEVICES WITH UPDATED SELINUX SECURITY PATCH
USE THIS FLASHABLE SU.
http://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
always use chainfire's latest flashable zip
the file above includes flashable supersu.zip odin 3.11 and TWRP (do not extract supersu zip)
1. DOWNLOAD TWRP AND ODIN AND SUPERSU.ZIP. extract all except supersu.zip do not extract supersu.zip
(NOTE PUT SUPERSU.ZIP INSIDE INTERNAL STORAGE THIS TWRP BUILD DOES NOT DETECT EXTERNAL MMC, so anything you flash in the future make sure its in internal storage
1. install samsung drivers
2. open odin click AP then select TWRP file
3. Click options UNCHECK auto restart
4. Put phone in odin mode Volume down + Home key + power key
5. there will be a warning press volume up to continue
6. insert usb cable wait for drivers to finis installing
7. check status (see blue box above that means phone is ready)
8. Click Start to start flashing
9. after flash there will be a green sign saying pass
10. remove usb cable DO NOT restart phone. Restarting phone will revert recovery back to stock.
11. After ypu finished flashing you cannot power off the device via power button so remove battery then insert. do not turn it on.
12. then go to recovery mode by pressing volume up + homekey + power on,
13 flash supersu.zip should be inside internal storage preferably on root directory of internal storage
14. reboot and wait, 1st boot will take time.
15. congratulations you are now rooted and warranty is now void.
16. Odin problem? search on google about issues on stuck at pit file mapping.
17. phone not detected? download and install smartswitch from samsung.com run it then connect phone if detected, go back to odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Please always enable oem unlock at all times when you have twrp installed. i tried resetting my phone once and ended up with binary blocked and cannot boot up
Disclaimer: I am not responsible for whatever you do to your phone
if you encounter bootloops while tinkering with your phone just search for official firmware from reputable sites and flash it thru odin. Google is your friend
Big credits to Joenka of 4pda.ru and others for letting me see the link to j1 2016's device tree. To j1 2016 ph group
chainfire and odin creators thank you.
:good::good::good::good:
Mabuhay Pilipinas!
Thanks for this
iistoryahi said:
Thanks for this
Click to expand...
Click to collapse
welcome
the download file says its a .rar file but when I download it, it is an .exe file.
thank you so much! email me so that i can send back my gratitude!
pokamonNereid said:
the download file says its a .rar file but when I download it, it is an .exe file.
Click to expand...
Click to collapse
try other browsers or try dloading on pc. sometimes it happens with datafilehost. enable adblock before downloading
misterjam said:
thank you so much! email me so that i can send back my gratitude!
Click to expand...
Click to collapse
thank you
4ld0u5 said:
Root j120h/ds
for some reasons that i dont know there are different variants of j1 2016, mine is j120h which is a spreadtrum sc7727se phone while others have j120f exynos soc, so this tut only works for j120h models of j1 2016
Req TWRP, ODIN, SAMSUNG DRIVERS, FLASHABLE SUPERSU, OEM UNLOCK ENABLED ON DEVELOPER OPTIONS.
DOWNLOAD
UPDATE: SUPERSU INSIDE FILE WONT WORK AND WILL CAUSE BOOTLOOPs ON DEVICES WITH UPDATED SELINUX SECURITY PATCH
USE THIS FLASHABLE SU.
http://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
always use chainfire's latest flashable zip
the file above includes flashable supersu.zip odin 3.11 and TWRP (do not extract supersu zip)
1. DOWNLOAD TWRP AND ODIN AND SUPERSU.ZIP. extract all except supersu.zip do not extract supersu.zip
(NOTE PUT SUPERSU.ZIP INSIDE INTERNAL STORAGE THIS TWRP BUILD DOES NOT DETECT EXTERNAL MMC, so anything you flash in the future make sure its in internal storage
1. install samsung drivers
2. open odin click AP then select TWRP file
3. Click options UNCHECK auto restart
4. Put phone in odin mode Volume down + Home key + power key
5. there will be a warning press volume up to continue
6. insert usb cable wait for drivers to finis installing
7. check status (see blue box above that means phone is ready)
8. Click Start to start flashing
9. after flash there will be a green sign saying pass
10. remove usb cable DO NOT restart phone. Restarting phone will revert recovery back to stock.
11. After ypu finished flashing you cannot power off the device via power button so remove battery then insert. do not turn it on.
12. then go to recovery mode by pressing volume up + homekey + power on,
13 flash supersu.zip should be inside internal storage preferably on root directory of internal storage
14. reboot and wait, 1st boot will take time.
15. congratulations you are now rooted and warranty is now void.
16. Odin problem? search on google about issues on stuck at pit file mapping.
17. phone not detected? download and install smartswitch from samsung.com run it then connect phone if detected, go back to odin.
Note: Please always enable oem unlock at all times when you have twrp installed. i tried resetting my phone once and ended up with binary blocked and cannot boot up
Disclaimer: I am not responsible for whatever you do to your phone
if you encounter bootloops while tinkering with your phone just search for official firmware from reputable sites and flash it thru odin. Google is your friend
Big credits to Joenka of 4pda.ru and others for letting me see the link to j1 2016's device tree. To j1 2016 ph group
chainfire and odin creators thank you.
:good::good::good::good:
Mabuhay Pilipinas!
Click to expand...
Click to collapse
hi bro
not working ext sd card or otg . how to fix it . iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
j120f Twrp Recovery And Root
Info And Download Recovery TWRP and Root Hare: http://forum.xda-developers.com/and...-galaxy-j1-t3444010/post68282110#post68282110
javad490 said:
Info And Download Recovery TWRP and Root Hare: http://forum.xda-developers.com/and...-galaxy-j1-t3444010/post68282110#post68282110
Click to expand...
Click to collapse
Your rooting tutorial link is for j120f.
this tutorial is for j120h
4ld0u5 said:
Your rooting tutorial link is for j120f.
this tutorial is for j120h
Click to expand...
Click to collapse
OK,But some Person Search for j120F Custom recovery and Root,also Hare:
4ld0u5 said:
mine is j120h which is a spreadtrum sc7727se phone while others have j120f exynos soc, so this tut only works for j120h models of j1 2016
Click to expand...
Click to collapse
j120F and j120H is Similar Device,but j120F Support 4G LTE network
The download file is a .exe. I tried to use other browser but it is also an .exe.
Please help me.
anitamobile said:
hi bro
not working ext sd card or otg . how to fix it . iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
Click to expand...
Click to collapse
i think theres a twrp released with ext storage support. just find it.
or you can create a flashable zip of whatever you wnt to place or modify ur system and flash it via this twrp.
can we get a mirror of this... file is not downloadable in chrome the site says and other browsers want to download an exe file... seems.. untrustworthy
successfully rooted. thank you po. mayroon po ba kayong flashable framework-res.apk na naka zip file pra sa J120H/DS. flashable via recovery. needed lang po sir. pahingi po. thanks in advance. God bless
Bro how fix ext sdcard
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
thank you for mach
Fixed TWRP installation for those having trouble detecting extSdCard in OPs realease can be found here:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
Help.
So........... I did everything to before flashing super su....but when I try boot recovery, red text at the top of my screen says RECOVERY IS NOT SEANDROID ENFORCING. and it stay like that forever until I take battery out...what do I do!?!?
Related
This is the most common question asked on this forum how to install firmware using ODIN, I know there are many post in which this has been shown but I have decided to include this as a sticky thread so its up there for everyone to make use of.
Initially this will only show installing firmware using Odin, other things will be added
Post 1 - Introduction
Post 2 - Installing Firmware using ODIN
Post 4 - Rooting & Installing CWM
The process of Installing the Firmware is the same for all variants of Note i.e 8000, 8005, 8010, 8013, 8020 BUT MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR THE VERSION OF NOTE YOU HAVE
You can also flash Rom by copying the Rom on your device and using Mobile Odin Pro App
The same is a paid app and is available of play store
You need to be Rooted to use this app
Link to Mobile Odin - https://play.google.com/store/apps/...xLDEsImV1LmNoYWluZmlyZS5tb2JpbGVvZGluLnBybyJd
Odin
WARNING - When you downgrade from JB to ICS most probably you will get stuck at the Samsung Logo and your device will not boot, You will need to go into recovery and do a complete wipe & reset to boot
So always backup your data before flashing a Rom
You will need the following things before you install the firmware
Firmware - you can download either from Samfirmware or http://forum.xda-developers.com/showthread.php?t=2016792
Once you download the files you will need to extract, the extracted file should have the following extention .tar.md5 remember the path where you extract the file
Odin - you can download again from the above link
Note drivers - Should be installed with Kies (Make sure you exit kies before proceeding further)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please enter Download mode on your tablet by pressing Power+Volume down button until you get the download mode screen as show below
Once you enter download mode this what you should see on the tablet please press volume up and ignore the warning
Connect your device to your computer using the USB cable
Make Sure your device is sufficiently charged
Make sure all drivers are install correctly
Exit Kies
Extract all the file in the Odin archive if they are zipped
Run Odin by clicking on the exe file as show above
If all drivers are correctly install it should be detected by Odin in ID Com
Click on PDA it will open file select menu and select the .tar.md5 file by going to the location from where you extracted it.
Once the file is loaded, press the start button.
Odin will start the process of flashing the firmware and will take around ten minutes to complete it once it is successful it will show a pass message and reboot the device.
You are done installing the new rom Congratulations !!!!!!!!
Rooting & Installing CWM Recovery
Rooting
Method 1
The easiest way of rooting is by downloading and installing the exynos from here
http://forum.xda-developers.com/showthread.php?t=2050297
Install the APK on your device
Run the APK
Click on Root Device
Your device is Rooted
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Method Two
You will need the following things before you install the firmware
CWM for Note - Attached DO NOT EXTRACT(Have not tried this particular one on any other version except N8000)
Odin - Download for here http://androidfirms.in/tools.html
SuperSU - Attached
Copy SuperSU to SD Card (Internal or External)
Note drivers - Should be installed with Kies (Make sure you exit kies before proceeding further)
Please enter Download mode on your tablet by pressing Power+Volume down button until you get the download mode screen as show below
Once you enter download mode this what you should see on the tablet please press volume up and ignore the warning
Connect your device to your computer using the USB cable
Make Sure your device is sufficiently charged
Make sure all drivers are install correctly
Exit Kies
Extract all the file in the Odin archive if they are zipped
Run Odin by clicking on the exe file as show above
If all drivers are correctly install it should be detected by Odin in ID Com
Click on PDA it will open file select menu and select the .tar file (CWM file attached should have extention .tar) by going to the location from where you saved it.
Make Sure you un-check Auto Reboot button in Odin
Once the file is loaded, press the start button.
Once the process in completed it show PASS but device will not restart.
Do not restart the device in normal mode but in recovery Mode
Press Power+Volume UP button till you see the GT-N8000 logo then leave power button but do not release the volume up button until it boots into recovery mode thats CWM
Scroll down to Install zip from SDcard
Select SD card if supersu is stored on the internal SD card or external SD if supersu is stored on external card
Once you select it will give a warning message, select yes to proceed installing super su
Once you are done you can go back to main menu and reboot (It may give you message which will disable device from installing stock recovery after you reboot select yes)
Reboot device.
Run SuperSu from applications
Congratulations you have done installing CWM recovery and rooting your device!!!!!!
Warning - Installing CWM will increase your binary count (Next tutorial will teach you how to reset it)
Method 3
Download CF Autroot from the following links
N8000 - http://download.chainfire.eu/236/CF-Root/CF-Auto-Root/CF-Auto-Root-p4noterf-p4noterfxx-gtn8000.zip
N8010 - http://download.chainfire.eu/247/CF...to-Root-p4notewifiww-p4notewifixx-gtn8010.zip
Extract the files
Run ODIN
Put your device in download mode
Load the .tar.md5 in PDF
and follow the rest of the process you would follow for installing a rom
Thank you..... thank you .....thank you! !!!!!!!!!!!
good
Clear, for all with questions, thnx.. maybe a sticky.
Please provide a link with latest odin version..
Odin: http://forum.xda-developers.com/showthread.php?t=1728605
Will this work on jelly bean uk n8010
Sent from my GT-N8010 using xda premium
If you have the rom then yes the process is same for all versions infact for almost all samsung devices
What do umean by if I have the rom ?
I dont understand because I havent rooted yet and this is the stock rom which came with it
Sent from my GT-N8010 using xda premium
Custom Rom Flashing Guide... (Not Stock)
1. Download the odin, Samsung drivers, root files and cmw files from above
2. Install the odin and samsungs drivers.
3. Plug your tablet into the computer and place the root zip on to your memory card..
4. Also found the Rom u want to install that works with your device and save it to your memory card
5. Once finished unplug your tablet from the computer and open odin on the computer
6. Power down your tablet.. Now Power it back on by Holding Power+Volume down button until you get the download mode screen
7. Plug your tablet back up to the computer (odin should see your tablet)
8. Using odin uncheck auto reboot and place the cwm tar in to the PDA box
9. Hit start button and let the process run
10. Once it finished Restart your tablet by Holding Power+Volume up button until you get the Recovery mode screen
11. Now install zip from sd card..
12a. Install su zip if u only want to Root your device
12b. Install Rom than su zip if u want a New Rom
13. Reboot device
what i ment was if you have firmware downloaded for 8010 the you can flash it on your device as to flash a rom you need a rom first which will work with you device
Hope this clears what i ment
That steps shown above are for custom roms and will not work with stock roms so please be aware of the same
Which instruction should I use ?
Sent from my HTC One X using xda premium
Lewiswatson99 said:
Which instruction should I use ?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Which ever one seems easier for u..
Please do not missguide them please tell me how can you flash a stock firmware using CWM recovery.
IF YOU ARE FLASH STOCK FIRMWARE WHICH IS UNTOUCHED IT CAN ONLY BE FLASHED USING ODIN OR MOBILE ODIN CANNOT AND I REPEAT CANNOT BE FLASHED USING CWM
Ok here is my question:
How to root sgn n8010 which is on stock jelly bean (UK) ?
Which method can I use ?
Thanks in advance
Sent from my HTC One X using xda premium
Lewiswatson99 said:
Ok here is my question:
How to root sgn n8010 which is on stock jelly bean (UK) ?
Which method can I use ?
Thanks in advance
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
If you just want to root use the ExynosAbuse guide.. Just install the app and follow the instructions
http://forum.xda-developers.com/showpost.php?p=35512626&postcount=1
---------- Post added at 10:22 AM ---------- Previous post was at 10:13 AM ----------
samir_a said:
Please do not missguide them please tell me how can you flash a stock firmware using CWM recovery.
IF YOU ARE FLASH STOCK FIRMWARE WHICH IS UNTOUCHED IT CAN ONLY BE FLASHED USING ODIN OR MOBILE ODIN CANNOT AND I REPEAT CANNOT BE FLASHED USING CWM
Click to expand...
Click to collapse
Im sorry if that's what it seems like I doing but I not.. Im just trying to tell them how to install CWM get Root and flash Roms.. Earlier this person ask me about fixing lag and i told him about flash a Custom Rom could Fix that.. I was assuming he was having trouble with that process. If its a problem i was delete my simple guide...
No issues was just clarifying bec there are many who are not expert and will try to do that.
If you flash using ODIN you do not need to root
I agree the best method to root is using the exynos exploit patch
First, thank you for this thread. Made the whole process easy.
One thing I've noticed is I cannot mount my external SD in CWM which is a pain with a 16 Gb device. Any ideas why this would be?
Thank you.
Sent from my GT-N8013 using Tapatalk HD
Why do you want to mount the ext SD card if you want to do it to take a back up there is an option in the backup and restore which will allow the back to be done on the ext SD card
samir_a said:
Why do you want to mount the ext SD card if you want to do it to take a back up there is an option in the backup and restore which will allow the back to be done on the ext SD card
Click to expand...
Click to collapse
The problem is I can't get to the SD card in CWM. Right now my only option is to back up to my internal. When I select the option you mention it says it failed to mount.
As well when I flash a ROM it has to be saved in internal for CWM to see it. Since I have such limited memory (16 GB) using the external SD for CWM would be a huge help.
Hope that clarifies it a little.
Sent from my Galaxy Nexus using Tapatalk 2
flippingout said:
The problem is I can't get to the SD card in CWM. Right now my only option is to back up to my internal. When I select the option you mention it says it failed to mount.
As well when I flash a ROM it has to be saved in internal for CWM to see it. Since I have such limited memory (16 GB) using the external SD for CWM would be a huge help.
Hope that clarifies it a little.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
In recovery for Backups.. by clicking backup and restore the (top options are for the internal sd card) and using the (Bottom options are for the external sd card)..
In recovery for zip files on sd card... by clicking install zip from sdcard the (Top option choose zip from sdcard is for Internal) and the (bottom option choose zip from external sdcard is for the one you put into the tablet)
If this doesn't work something my be wrong with your external sdcard or try installing another version of cwm because mines work.. Im using CWM v6.0.2.3-touch
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/showthread.php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on iq6A
do you already own this phone?
Cherry mobile Omega HD info states that its a dual core phone while all info about i-mobile IQ6 states its a single core phone. does anyone know which mediatek chipset the Omega HD uses? It's GPU?
yes i had it
How?
How can we flash the CWM to the Omega HD if you don't even give us a flashtool? Is this Rooting process tested? is it working?
Please help me
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
Sir, can I have a copy of the Setting.apk of your Cherry Mobile HD? i've accidentally forgot to have a backup of it and now, i've accidentally just erased it. please help me. thankyou very much
Pretty Please?
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
please post the Settings.apk of the Cherry Mobile Omega HD sir. I really need it it would be appreciated if you post it here.
How to Backup the phone
just bought the phone yesterday
do yo guys know how to back up this jellybean phone?
Hey guys, if you have FB we have a group with most of oHD users. Just search "CherryMobileOmegaHD" in FB (can't post links yet. sorry)
There are custom roms in the group, the usual rom cooked from dsdixda's kitchen (zipalign, deodexed, rm bloatwares)
@cyzarine
What do you mean with backup? We have the stock rom in the group, you might want to check it out.
Bummer! I'm stuck at step 3!
You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
Click to expand...
Click to collapse
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!
anyone have a kernel that have oc"?
In need...
Woke up to a drained Omega HD today.
Plugged it in to have it charged.
Switched it on afterwards.
"OmegaHD" flashed before my eyes, followed by a blank screen with the familiar Cherry Mobile tune playing on the background. And then nothing! NO DISPLAY! I touch the screen and there are sounds playing to confirm each press, which means I am pressing on the right places -- only that there is NO DISPLAY APPEARING.
I switch it on and off, still the same results.
Wiped cache. Nothing... Since it's practically new, I go ahead and factory-restore the thing... still the same results. NO DISPLAY! :-S
What else can I do to this device to have it work properly?!
Have you installed any custom rom or any other zip files with your phone?
xMinistro said:
Have you installed any custom rom or any other zip files with your phone?
Click to expand...
Click to collapse
do have stock rom can you give plsss......
---------- Post added at 11:02 PM ---------- Previous post was at 10:41 PM ----------
[/COLOR]
Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
Click to expand...
Click to collapse
Hi. Can you please post a mirror on the twrp-omegahd.img file? All of the other files have been downloaded except for the img file. Error comes up.
bakes5981 said:
Bummer! I'm stuck at step 3!
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!
Click to expand...
Click to collapse
please hit thanks if this helps
OmegaXtremeHD link issues
OmegaXtremeHD link is not working .... 509 error .... any mirror or alternative links?
Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
init.d
signal tweaks
3g tweaks
battery tweaks
v6 supercharger
kickasskernel
crossbreeder
download link
https://www.dropbox.com/s/8q1c6db45uegepk/OmegaXtreme.zip
updated link
save rom in SD card
reboot to CWM/TWRP
WIPE DATA/FACTORY RESET
install rom via SD card
reboot
Click to expand...
Click to collapse
Hey buddy,
Where's the file..??
StanleyD said:
Hey buddy,
Where's the file..??
Click to expand...
Click to collapse
will update link later
having trouble with some apps working on my Omega HD. a couple of my Android mainstays are Haxsync and Swiftkey. on my Omega HD, they run no problem, but if the unit powers off for whatever reason, when I turn it back on, my Haxsync account (under Settings/Accounts) disappears, requiring me to set up the app again, and Swiftkey is no longer activated as my default input. any help?
Please read the guides below before asking questions
========================================================================================================================
This CWM and Root Method is tested from many users and at least by me on this devices GT-I9506 and SHV-E330S!!
========================================================================================================================
USE THIS GUIDE WHEN YOU KNOW WHAT YOU DO AND YOU DONT CARE ABOUT KNOX WARRANTY 0x1b !!!
IF YOU DONT WANT TO VOID YOUR KNOX WARRANTY STOP READING THE TEXT BELOW AND GO OUT OF THIS THREAD..... Thanks !!!
========================================================================================================================
----- SHORT DECLARATION - ODIN3 -----
PDA refers to the build version of the firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
.PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
If it has multiple .tar archive then:
• The .tar with modem in the name is the phone/baseband bit of the package
• .tar with csc/multi-csc in the name is the csc bit of the package
• .tar with code/PDA in the name is the PDA part of the firmware package
If this is the case you will need to put these .tar archives in the specific areas of Odin to flash the update
Click to expand...
Click to collapse
Get -->Odin3<-- Just extract Odin folder and keep the odin3.ini file in it.
I use v1.85 in this guide you can use also the latest version... it doesnt matter.
Click to expand...
Click to collapse
----- FLASHING WITH ODIN3 v1.85 -----
Click to expand...
Click to collapse
1. Just download the CWM version you want from the 2nd post. It must be a .tar or .tar.md5 file!!
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar or .tar.md5 file that you downloaded in step 1
5. PLEASE DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION!!!
6. Connect the USB cable and wait for the ID:COM section to turn yellow
Should look like this screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
Click to expand...
Click to collapse
========================================================================================================================
-- ROOT METHOD SGS4 I9506 + E330S --
Click to expand...
Click to collapse
The following root file was made for the E330S and works also on I9506.
The only difference to the original file is that i changed the Korean superSU.apk with the International free superSU.apk from great Chainfire´s thread: http://forum.xda-developers.com/showthread.php?t=1538053
Now you are able to read the text and dont need to learn Korean language
Click to expand...
Click to collapse
1. Download ROOT_E330S_I9506_v2.zip and Latest UPDATE-SuperSU-vX.xx.zip package fom Chainfire!!!!!
3. Transfer the file ROOT_E330S_I9506_v2.zip and UPDATE-SuperSU-vX.xx.zip to the extSDCARD(the SDCARD where you afterwards plugged in!!) or the SDCARD(from your device)
4. Turn off your Device
5. After device completely OFF - Enter Recovery
-->Entering Recovery:
- Hold Volume UP + Power Button
- When device turns ON, RELEASE POWER BUTTON when it says RECOVERY BOOTING (ignore the text "SECURE FAIL: Recovery" since you flashed CWM ....)
- Will Enter Recovery
6. Select install Zip
6.1 Select choose zip from external SDCARD(if you transferred it on SDCARD where you afterwards plugged in!!) or choose zip from SDCARD(from your device)
7. Select file ROOT_E330S_I9506_v2.zip
8. Move to YES - Install ROOT_E330S_I9506_v2.zip touch it or Push the Power button
9. Return to CWM main menu
10. Select install Zip
10.1 Select choose zip from external SDCARD(if you transferred it on SDCARD where you afterwards plugged in!!) or choose zip from SDCARD(from your device)
11. Select file UPDATE-SuperSU-vX.xx.zip
12. Move to YES - Install UPDATE-SuperSU-vX.xx.zip touch it or Push the Power button
13. When update procedure finished, REBOOT.
Now your device is rooted!
Click to expand...
Click to collapse
Cheers
If i forgot something or it is wrong just post here in thread Thanks!
Cwm - versions - download
On this Post you can dowload the CWM to flash it with ODIN to your device.
FOLDER: 1_CWM_FILE_I9506_E330S
1. Chenglu_cwm_recovery_6.0.3.7(0905)-fix-exSdcard.tar <-- build from Chenglu @Chenglu aka github: xiaolu
2. Philz_Touch _CWM_6.3.7_V5.15.0_unofficial.tar <-- a unofficial build by unknown from @Phil3759 - Philz Touch CWM -- github: philz_touch_cwm6
Click to expand...
Click to collapse
Many thanks to this persons!!! a big -> ^^
FOLLOWING CWM IS SPECIALLY TESTED AND MODIFIED FOR GT-I9506!! (NOT TESTED ON E330S!!)
FOLDER: 1.1_CWM_FILE_I9506
1. Philz_Touch__CWM_6.3.7_V5.15.0_unofficial_(fixed_preload).tar <-- a unofficial build modified for I9506 by xenix96 from @Phil3759 - Philz Touch CWM -- github: philz_touch_cwm6
2. CWM_6.0.4.6_Non-Touch_GT-I9506.tar <-- a unofficial CWM build from @dridri85 -- github: dridri / android_device_samsung_ks01lte
Click to expand...
Click to collapse
Happy debloating guys
another one ^^^^^^
^^ last one ................
Thanks! xenix96.
This Works great for my I9506.
Thanks xenix96!
If it wasn't for you I would still be with a castrated beast.
I just want to ask if this custom version of Phil's Touch has less features compared to the common one we all know?
Otherwise I will have to install the CWM, but I don't like it.
Sent from my (soon rooted) Samsung Galaxy S4 LTE+ (GT-I9506)
Cr4z33 said:
Thanks xenix96!
If it wasn't for you I would still be with a castrated beast.
I just want to ask if this custom version of Phil's Touch has less features compared to the common one we all know?
Otherwise I will have to install the CWM, but I don't like it.
Sent from my (soon rooted) Samsung Galaxy S4 LTE+ (GT-I9506)
Click to expand...
Click to collapse
I use this unoffcial release of philz cwm cause it has much more features and mostly all features working.
aroma file manager, terminal, script thing i didnt tested and really never used it.
the chenglu cwm got only the basic features of cwm like we all know from source. for all who dont want more its also great
ok kids and wife waiting for to make breakfeast
Cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app
xenix96 said:
I use this unoffcial release of philz cwm cause it has much more features and mostly all features working.
aroma file manager, terminal, script thing i didnt tested and really never used it.
the chenglu cwm got only the basic features of cwm like we all know from source. for all who dont want more its also great
ok kids and wife waiting for to make breakfeast
Cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah I choosed the same.
I only suggest you to add at step #6 of the flashing tut the link to the Samsung USB drivers as it's a common thing people might forget to install and therefore the device wouldn't be detected when connecting by USB.
Now thanks to you I can finally back everything up with Titanium and flash another ROM (the NEE one)!
Remember to setup a Beer button so that we can offer you one.
Cr4z33 said:
Yeah I choosed the same.
I only suggest you to add at step #6 of the flashing tut the link to the Samsung USB drivers as it's a common thing people might forget to install and therefore the device wouldn't be detected when connecting by USB.
Now thanks to you I can finally back everything up with Titanium and flash another ROM (the NEE one)!
Remember to setup a Beer button so that we can offer you one.
Click to expand...
Click to collapse
well if you take a look to my signature and push to the thread with firmwares....then go to rooting section theire i wrote the samsung drivers ....
on this currently thread i thought everyone knows that we need driver to communicate with device....
but your 100% right i have to explain that for those who dont know that.
so i will add this evening
i got a beer button under my avatar but for that you guys dont need do anything.
spare your beers for real developer !!!
i hope we get some devs for this device
I just gathered informations - tested - and share it with you guys. nothing special for me.
cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
boart
No i had no problems with the external sd card.
Rechargelegend said:
boart
No i had no problems with the external sd card.
Click to expand...
Click to collapse
Same.
boart said:
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
Click to expand...
Click to collapse
with philz cwm there is also no problem with extsdcard. i can make backups,restore and install from extsdcard
Sent from my GT-I9506 using XDA Premium 4 mobile app
worked a treat
cheers
this morning I got really happy reading this thread :good::good::good::good: - luckily a way to get my I9506 (probably one of the very first delivered ones in germany) rooted
many thanks for generating a way to root!!!!!!!!!!!!!
BTW: Are there already some other modem versions available or does anyone have some experiences with the dfiferent modem versions?
boart said:
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
Click to expand...
Click to collapse
Same problem here. No ext sd card access here with Phils.
Do you remove the sd before going into CWM? Format is exFAT.
Thanks!
Gesendet von meinem GT-I9506 mit Tapatalk 2
puschel_1 said:
Same problem here. No ext sd card access here with Phils.
Do you remove the sd before going into CWM? Format is exFAT.
Thanks!
Gesendet von meinem GT-I9506 mit Tapatalk 2
Click to expand...
Click to collapse
I just used Chenglus CWM. No problem with getting access to the SD Card with it.
Well finally the root is here cheers the beers are on their way..........
Anywho have not done the root yet. Before I do is there a way of backing up what I have no so if something happens(touch wood) I can revert back to what I have now?
Also in a dummies guide sentence what is the knox warranty googled it and still not sure
Cheers
funkyirishman said:
Well finally the root is here cheers the beers are on their way..........
Anywho have not done the root yet. Before I do is there a way of backing up what I have no so if something happens(touch wood) I can revert back to what I have now?
Also in a dummies guide sentence what is the knox warranty googled it and still not sure
Cheers
Click to expand...
Click to collapse
I actually had my contacts saved on the Google account and you can do the same.
Save the SMS with SMS Backup & Restore.
Everything else can be moved to your computer and back.
I then rooted the phone, installed Titanium Backup and went on with a complete apps, data and settings backup.
Even after flashing the NEE firmware everything (but root and CWM) was there without the need of a restore.
Sent from my Samsung Galaxy S4 LTE+ (GT-I9506)
Cheers
Went to load the tar file using odin but when I connected the phone it installed the software and then opened Odin and loaded file and then connected phone but it did not go yellow see below it went a light blue?
Anyone know what maybe causing this?
[GUIDE] How to flash CWM or TWRP recovery and root your device!
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
Credits: This root method was found from a facebook group that uses this phone, i am just posting it here. Give thanks to Eduardo Perez!
I ported TWRP recovery for this device and Eduardo did the CWM recovery. Also thank rua1 from XDA for his MTK droid tools. Koush for his driver installer.
USERS OF 4037N/T or any other model that is from T-Mobile, DO NOT TRY ANY OF THE RECOVERIES HERE. NOR TRY TO MOD IT IN ANY WAY. YOU WILL BRICK YOUR DEVICE.
See post #68 for more info
Notice for T-Mobile owners (4037N)(MetroPCS) Users!!
Requirements:
1. A windows PC
2. Universal ADB driver
3. ROOT ALCATEL 4037N 4.4.2 zip file
Instructions:
1. Download the ROOT ALCATEL 4037N 4.4.2 zip file here and extract it anywhere on your desktop.
2. Go inside the extracted folder and extract iRoot zip file and install iRoot. Disable any antivirus you may have or User Account Control(UAC).
3. After installing iRoot, go to your phone and enable USB debugging. Look up how to enable it on google if you don't know how to.
4. Run iRoot as administrator and then connect your phone.
5. Wait until it detects it and then press the root button and your phone will be rooted.
If you want to see a video of the rooting check here
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG. BACKUP TUT HERE
Requirements:
1. A windows PC
2. SP flash tools
3. CWM or TWRP recovery
4. Universal ADB driver
5. MTK preloader driver
VIDEO TUT By nashj1975
https://www.youtube.com/watch?v=xNWALNB9M-Q
[GUIDE] FLASH CWM/TWRP
1. Download the attached files below and extract them anywhere on your computer, then download the FLASHTOOLS and SP FLASHTOOL folder here and extract them.
2. Go to this link to get the drivers specifically for your phone. Install the program after the download is complete.
3. Go to the FLASHTOOLS folder and extract Driver_Windows_MTK_Preloader drivers and then go to auto install and install the drivers. This is for the preloader drivers which will be used later.
4. Install ADB driver by going to the Flash Tool folder and then adb folder, then locate the adb file and run it as administrator. Go to settings, then development if you don't see development go in about and click on the build number 7 times to enable development mode. Enable USB debugging.
5. Open the SP flash tools folder and run flashtool.exe as administrator.
6. If anything pops up just ignore it and click ok.
7. Go to option then connection and make sure auto detect is selected.
8. Go to scatter loading and click it, locate the scatter file from the extracted folder and open it.
9. When it opens click on the recovery option and click the check box.
10. Decide which recovery you want and rename it to recovery.img.
11. Click on the location in the same recovery option and choose your recovery.img
12. Turn off your phone and take out the battery.
13. Click on Download and then connect the phone to the PC.
14. If you did everything i said above, it will flash your chosen recovery.img and you will have a custom recovery.
[GUIDE] ROOT/Superuser
1. Reinsert the battery and turn on the phone.
2. Go to the alcatel 4037 folder that you extracted.
2.Place the root_grouper-tilapia_4.4_update.zip and superuser.zip on your sdcard or internal storage. ( If these root files don't work, just download the UPDATE-SuperSU-v2.46.zip and flash that.)
3. Turn off the phone and boot it into recovery mode.
4. Navigate using the volume keys for CWM recovery or just use touch for TWRP. Use the power button to select.
5.Select install zip from sdcard and choose zip from sdcard. Locate the zip files that you sent.
6. Flash the root_grouper-tilapia_4.4_update.zip first then flash the superuser.zip
7. Reboot your phone and there you go. Root Access
OR
ROOT YOUR PHONE USING THE 360 ROOT Chinese apk attached below.
Copy the 360ROOT.apk to your sdcard either internal or external.
Install it and then follow the screenshots below to see how to root.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah i know it says 4032A but it was just to show you how to use it.
After clicking on root your phone will be rooted. P.S You need an internet connection for the root apk to work.
How to unroot
This is a guide for unrooting your device. Download universal unroot from the play store, or look for an apk file.
Install it and bam you're unrooted.
How to make a backup of your device
There are many ways to back up your phone. Some are better than some but you can decide which you want to use.
1. Using recovery . Boot into recovery mode and select backup.
2. Using Mtk droid tools. Connect your device to the PC with usb debugging enabled. Run mtk droid tools as administrator and wait for it to load. Click on the root,backup and recovery tab. Select backup.
3. Using SP flash tool. This is recommended for those who don't yet have root on their device. There is an original post for this method from rua1 here
How to unbrick your device
Unbricking can be done using the One touch upgrade tool from the alcatel website http://www.alcatelonetouch.com/global-en/products/smartphones/pop_d3.html#.VLbhTiwYGzU
1. Download the Mobile Upgrade S 4.2.7 upgrade tool and install it
2. Turn off your device and take out the battery.
3. Reinsert the battery and open the tool.
4. Select your device from the drop down menu 4037 and follow the instructions from the tool.
I am trying to root the fierce 2 but it doesnt seem to flash the twrp recovery even though I am sure I did everything right! Nothing happens at the last step where you said to take out the battery then click download and connect the phone to the PC. Nothing happens the phone just shows the Actel logo and then vibrates and turns of then back on over and over. Any ideas?
Note I did not do step 5
GhostSamuraiX said:
I am trying to root the fierce 2 but it doesnt seem to flash the twrp recovery even though I am sure I did everything right! Nothing happens at the last step where you said to take out the battery then click download and connect the phone to the PC. Nothing happens the phone just shows the Actel logo and then vibrates and turns of then back on over and over. Any ideas?
Note I did not do step 5
Click to expand...
Click to collapse
Use my unbricking method to restore your device, and i don't think Step 5 should be a problem.
Phones not in boot loop it works fine. Just nothing happens when I click download and connect the phone without the battery.
check your pm :good:
sweet my buddys been missing having root since he upgraded from the evolve, even better that there is a custom recovery.
whats the facebook group page cant seem to find it.
https://www.facebook.com/groups/556165774484796/ this is the link to the group on facebook...note the facebook group is in spanish tho so if you want you can use google chrome and let automatic translation do the work for you
Hi..thanks for ur guide...
I'm succesful root my 4035x
Sent from my 4035X using XDA Free mobile app
xmanner77 said:
Hi..thanks for ur guide...
I'm succesful root my 4035x
Sent from my 4035X using XDA Free mobile app
Click to expand...
Click to collapse
great happy that i helped :good:
---------------------
Thread updated!!
Thread is updated with a video showing how to root the phone @Altnot
New Video
New video showing how to root is coming soon! Thanks to junior member @nashj1975. :highfive:
Stock ROM
--
Thanks to OP. Successfully flashed CWM and rooted my OT 4035D (Alcatel One Touch Pop D3 with KitKat 4.4.2). Was unsuccesful with Towel Root, Framaroot and Kingo Root, but this did the trick! I already clicked your thanks button.
CVAngelo said:
Thanks to OP. Successfully flashed CWM and rooted my OT 4035D (Alcatel One Touch Pop D3 with KitKat 4.4.2). Was unsuccesful with Towel Root, Framaroot and Kingo Root, but this did the trick! I already clicked your thanks button.
Click to expand...
Click to collapse
Nice glad i could help
Hi
Thanks
abdullah.alhossain said:
Thanks
Click to expand...
Click to collapse
You're welcome
So sorry to say this but this only method works in WINDOWS 7 and for Marshmallow ROM ONLY
Supported Devices: Oppo F3 Plus (CPH1613EX) & Oppo R9s Plus (CPH1611EX)
Caution:
Please disable Antivirus for any false Detections
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Recovery:
1. Download Drivers and install them (Disable Signed Driver Enforcement)
https://drive.google.com/open?id=1T6MTq1upNt_yxrPD9MfOHR8vTOzRisvs
2. Download Oppo R9s Plus/F3 Plus Marshmallow Firmware (CPH1611EX_11_A.16_180106) and Extract it using Winrar/7-zip into a seperate FOLDER
https://drive.google.com/file/d/1xo-J5Pe65-fXyJbysVrAZYQ1mocfl53s/view
2.1 Also Download Oppo A57 Firmware and extract it anywhere you like
https://drive.google.com/uc?id=0B_0XnEjFCVsPWndzSnp2YTFYSkU&export=download
3. Download TWRP Recovery - Keep the recovery img in the same folder as of extracted firmware folder and make sure recovery file name is set to "recovery.img"
Twrp 3.1.1-0 (Latest) - Material Theme and Inbuilt Super SU Root available for easy rooting BUT Chinese language
Download and Extract only recovery.img and place it under firmware folder. u can delete other files.
https://drive.google.com/file/d/1gkNNx2Ik6oRF-juBDNIilDUu31w6_oI_/view?usp=sharing
To change the chinese language to english please download and flash this zip But in English language you will not get Super SU Root option to root the device from built-in twrp. you have to download SU zip now. So root directly from chinese language and then flash the english language zip to be on safe and easy side
https://androidfilehost.com/?fid=817550096634752414
Twrp 3.1.0-0 (old) (RECOMMENDED) -
Normal appearance of twrp and no inbuilt SU (sometimes it prompts to install SU, if you decline once, it won't prompt again) and totally English language. Most importantly you can flash opposite OTA updates (ozip) via this twrp
https://www.dropbox.com/sh/qbobokagdgme2oa/AABQBtKTmbwChne9z1DaayHca?dl=0&preview=recovery.zip
4. Run the MsmDownloadTool from A57 Firmware folder and you will get Session Timeout error. just ignore it and close the software
4.1. Now run MsmDownloadTool from our F3 plus firmware folder and uncheck "Reset After Download"
5. Switch off ur Mobile and Hold Vol down + Vol Up simultaneously and Plug the usb to pc
5.1 After plugging to pc, open device manager and expand PORTS section and make sure the device is detected as "Qualcomm HS-USB QDLoader 9008 (COM xx)". if not you have drivers issues!
6. Press F5, uncheck all options except Recovery and double click on Recovery option and select the recovery.img from firmware folder.
7. press Start and Flashing will be success (Green color message). press stop and unplug the usb
8. Press and hold Vol Up and Power Button and release them when it vibrates. NOW IMMEDIATELY after seeing oppo logo AGAIN PRESS Vol up + Power button to Power Off your device to prevent booting!!!! (If you fail to turn off your device, mobile will boot and will auto restore the stock recovery. so you will have to re-flash the twrp again)
9. Now press Vol Down + Power button to Enter into TWRP
BONUS - Stock Recovery & New OTA Update
Stock Recovery build: CPH1611EX_11_A.16_180106
https://drive.google.com/open?id=1u2Td1g93FwyAdPuKYNqz_iMHAYMpwrwJ
New Build Version: CPH1611EX_11_A.18_180413
Flash this zip via twrp. if it gives error 7 please ask in comment section
https://drive.google.com/open?id=1UA_DEjSQ4ESQO22VuvEpBsZhW9UepafY
else, flash this ozip from stock recovery
https://drive.google.com/open?id=1u2R65wYrLy2zqIhjww8adYWkqBjXgdq3
ROOTING
Screenshot: No more red line
Boot into TWRP by Holding Vol Down + Power Button
TWRP 3.1.1.0 - Go To Advanced option (Last but one option), Tap on last option: Super SU Root and Swipe to flash
UNROOT: just uninstall the SuperSU app to remove root
TWRP 3.1.0.0 - Download this zip and copy to storage and flash it
https://drive.google.com/open?id=1dIa9jRgh5Jy_cayM4QuOw8nL8ma574jU
UnRoot: Open SuperSU>Settings>Full UnRoot.
Note: After Rooting via twrp your device might reboot twice. dont worry. its not a bootloop. its a sign of success
XPOSED FRAMEWORK - Fix Red Statusbar Warning
Screenshot:
1. Download and add extension (.zip)
https://www.dropbox.com/s/e35zeqf619...bar FIX?dl=0
2. Boot into TWRP and flash the xposed framework zip and reboot (Reboot will take about 15mins. Please dont think its a Bootloop. Have a nap)
3. Install XposedInstaller 3.1.1 apk AND Hookcoloros_1.1_2_new.apk
4. Open ColorsOs3.0 app and make sure all the options (toggles) in chinese are Enabled or leave it as deafult or if you know chinese you can choose what you want
5. Open Xposed Framework > Modules > Enable ColorOs module that you have installed now
6. Reboot. Thadaaaa. No more Red warning statusbar
Note: Flashing Xposeduninstall zip will uninstall the xposed framework. Also, if something went wrong and gone bootloop after installing the xposed framework then use this uninstaller zip to fix the bootloop. bootloop wont occur but just telling this on safety thing
Video Tutorial:
https://www.youtube.com/watch?v=T6yQWCSLZt4
Optional:
IMEI Backup
goto twrp and backup EFS partition
you can also backup using this easy method via pc : https://forum.xda-developers.com/on...click-backup-restore-efs-oneplus-one-t3150883
CREDITS:
Xda, Baidu, bbs.7to.cn
used couple of links and very useful thread: https://forum.xda-developers.com/android/help/how-to-root-oppo-r9s-plus-cph1611-t3609586
@Rimo4099 for sharing 100% working twrp recovery.img
@john_david9000 - For sharing valuable information
@wuxianlin - He is the one who ported twrp :fingers-crossed:
@cjkimlaysico - he gave the instructions to run the msm tool (hard part)
does this have the red line on the notification bar after root anymore? recommend me sth we can do after root this phone pls ty so much ☺
verydp1 said:
does this have the red line on the notification bar after root anymore? recommend me sth we can do after root this phone pls ty so much
Click to expand...
Click to collapse
yes, Statusbar will turn into Red saying Root is enabled but i havent tried fixing by myself
However i have found a way to FIX IT <3
Please check the OP again. im updating the fix
i can't access the download link for msm download tools, help pls sir
shepherd80 said:
i can't access the download link for msm download tools, help pls sir
Click to expand...
Click to collapse
damnnn. something is not legal by sharing that specific file maybe bcoz of paid or cracked content. idk
first please try to flash with stock msmdownloadtool.exe which u get by extracting firmware. if it doesnt work then you need cracked msmdownload tool
iHeymanth said:
yes, Statusbar will turn into Red saying Root is enabled but i havent tried fixing by myself
However i have found a way to FIX IT <3
Please check the OP again. im updating the fix
Click to expand...
Click to collapse
ty so much. and btw show me sth we can do after root :fingers-crossed:
and is this similar to remove the yellow line "develope mode..." ?
verydp1 said:
ty so much. and btw show me sth we can do after root :fingers-crossed:
and is this similar to remove the yellow line "develope mode..." ?
Click to expand...
Click to collapse
show you what ? i dont understand ur first line.
yes, similar to remove the yellow line but not yellow line. just similarly red line will remove. we can also remove the captcha codes and yellow warning lines of developer options etc.. im figuring out to test in f3 plus
iHeymanth said:
So sorry to say this but this only method works in WINDOWS 7 and for Marshmallow ROM ONLY
Caution:
1. Please disable Antivirus for any false Detections
2. After getting Rooted, the statusbar will turn into Red cautioning about root access
check the screenshot
Note: Downloading Firmware is an Optional thing to Install only Recovery. If you want to install both Rom and Recovery then Download the firmware files too
TWRP Recovery:
1. Download Drivers and install
https://drive.google.com/open?id=1T6MTq1upNt_yxrPD9MfOHR8vTOzRisvs
2. Download Oppo F3 Plus Marshallow Firmware and Extract it using Winrar/7-zip into a seperate FOLDER
https://drive.google.com/open?id=0B5ZISKae4wQKeEdfbGNOT3lDa28
3. Download the Tool. zip (extract it) and Recovery.img and place it under the Firmware's FOLDER (step2)
msmdownloadTool link is down. find the cracked tool in google or crack the stock tool manually by this tutorial : techzai.com/crack-msmdownload-tool/
https://drive.google.com/open?id=13AKVz94x6w4-GaSnPTXzgCoGjwm2QqpQ
4. Switch off ur Mobile and Hold Vol down + Vol Up simultaneously and Plug the usb to pc
5. Run the MsmDownloadTool and Load the extracted Firmware from folder (.ofp)
6. Press F5, uncheck all options except Recovery and double click on recovery to Browse the recovery.img
7. press Start and Flashing will be done.
Holding Vol Down + Power Button will boot into Recovery
To Avoid Signal Loss/ IMEI Missing in future, please boot into twrp and take a backup of EFS Partition
ROOTING
Boot into TWRP by Holding Vol Down + Power Button and Flash the SU or Magisk
find the zip somewhere in xda. i will post it later. sorry
Please check the Video tutorial for this Rooting process
I will try to post a clean video tutorial. stay tuned!
FIX to Red Statusbar Warning (Screenshot)
1. Download the zip below and extract them
https://drive.google.com/open?id=1hVLLigAks6ltcHrPL21L5hqDgkUKSwv5
2. Boot into TWRP and flash the xposed framework zip and reboot
3. Install XposedInstaller 3.1.1 apk AND Hookcoloros_1.1_2_new.apk
4. Open ColorsOs3.0 app and make sure all the options (toggles) in chinese are Enabled
5. Open Xposed Framework > Modules > Enable ColorOs module that you have installed now
6. Reboot. Thadaaaa. No more Red warning statusbar
Note: Flashing Xposeduninstall zip will uninstall the xposed framework. Also, if something went wrong and gone bootloop after installing the xposed framework then use this uninstaller zip to fix the bootloop. bootloop wont occur but just telling this on safety thing
Video Tutorial:
https://www.youtube.com/watch?v=T6yQWCSLZt4
CREDITS:
Xda and Developers who made all these zips/apks
@Rimo4099 for sharing the 100% confirmed recovery.img, video tutorial, screenshot and installation steps
@john_david9000 - For sharing valuable information to confirm the source of this recovery img
@Wuxalin - according to info that John david provided me, i believe this recovery is exactly same as OPPO R9S recovery by wuxalin
Click to expand...
Click to collapse
Thank you for the mention, honestly I just said a few details only. We need people like you to shed some light on these unloved phones. XDA community thanks you heartfully for your contribution.
The only thing I can say is : Go Forth, and plant the Nougat to the ground herewith. . . . . . . . . . . . . . . . It's time for Nougat to be rooted.
Also just like to confirm that MSMDownloadTool works for Windows 10 too, as proved by this article and video : http://www.techzai.com/crack-msmdownload-tool/
john_david9000 said:
Thank you for the mention, honestly I just said a few details only. We need people like you to shed some light on these unloved phones. XDA community thanks you heartfully for your contribution.
The only thing I can say is : Go Forth, and plant the Nougat to the ground herewith. . . . . . . . . . . . . . . . It's time for Nougat to be rooted.
Also just like to confirm that MSMDownloadTool works for Windows 10 too, as proved by this article and video : http://www.techzai.com/crack-msmdownload-tool/
Click to expand...
Click to collapse
i think i have the nougat recovery. testing in progress now. will let you know
edit: tested nougat recovery of r9s/r9sk but FAILED
tested windows 10 method of flashing via MiFlash tool. flashing goes success but mobile keeps vibrating but no life
tested twrp 3.1.1.0 and 3.1.0.0. both are working fine but the latest twrp is in chinese language. will figure out to change its language
only windows 7 with msmdownload tool method is working.
Good news:
Root > Magisk v16.0(latest stable) is working flawlessly
Will update OP with magisk installation steps
note: backup ur internal memory in advance xD xD
Hi, i recently update my oppo F3 plus (CPH1613EX_11_A.18_180413 marshmallow), and i try to root it using this method, it's always boot on the stock recovery when i finish (i did step by step every single world you said).
I think that's a security renforcement about this version of colorOs, i wonder if there is a way ton downgrade to the last version without losing my data (lots of apps), because i did root it whit the version that i had once.
Thanks you
Re: So, i flashed my oppo with the msmtool that you put on your post (all images expect datauser partition), and changed the recovery image before the phone boots..... and it woorks perfectly now.
PS: dont upgrade to the version CPH1613EX_11_A.18_180413 if you want root your phone, it won't work.
EniMaX said:
Hi, i recently update my oppo F3 plus (CPH1613EX_11_A.18_180413 marshmallow), and i try to root it using this method, it's always boot on the stock recovery when i finish (i did step by step every single world you said).
I think that's a security renforcement about this version of colorOs, i wonder if there is a way ton downgrade to the last version without losing my data (lots of apps), because i did root it whit the version that i had once.
Thanks you
Click to expand...
Click to collapse
Did you uncheck "Reset After Download" option in msmtool ?
No, i didn't ; in all case i didn't let the phone boot after passing the recovery.img.
Wich version of rom do you have please ?
EDIT: when i downgrade the rom, it worked perfectly
NB: after downgrading , the first time, the phone boot directly and it was the new version (wich causes me problems) that was on it, even when i had flashing all the system
EniMaX said:
No, i didn't ; in all case i didn't let the phone boot after passing the recovery.img.
Wich version of rom do you have please ?
Click to expand...
Click to collapse
1. U need to uncheck reset after download option to not let the tool to reboot it phone into os
2. I have upgraded to a.18 build via ota 65mb and root worked. Tested with my own hands
3. Caution: if you dont CHECK userpartition in msmtool, after reboot it asks for Android password to proceed and we don't know that password. It's a checkmate. You need to wipe everything to boot
4. If you have patience please flash Magical 16.0 and test it. For me Wi-Fi is not turning on after flashing magisk.
5. I suggest you to use the twrp 3.1.0. bcoz the latest 3.1.1 does not flash oppo ota (.ozip)
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
EniMaX said:
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
Click to expand...
Click to collapse
I forgot to take backup of that 65mb Ota. Sorry. I will restore stock recovery in sometime and will download that 65mb ota
Does our oppo camera supports camera2api feature?
okay thanks you. if you are talking about the "expert mode" , yes the feature is on it
EniMaX said:
okay thanks you. if you are talking about the "expert mode" , yes the feature is on it
Click to expand...
Click to collapse
I have enabled it to check pixel cameras to work but failed.
also if ur willing to do then please enable multi window in ur rooted marshmallow (build prop and developer mode method)
I tried but no multi window option enabled in recent apps
EniMaX said:
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
Click to expand...
Click to collapse
OTA link for CPH1613EX_11_A.18_180413 (65mb)
Can use this 65mb ota if you are in A16 or A17 build versions
https://drive.google.com/file/d/1u2R65wYrLy2zqIhjww8adYWkqBjXgdq3/view?usp=drivesdk