CSC question - Galaxy S6 Q&A, Help & Troubleshooting

Hello - I am reverting from a custom firmware to Stock and flashed stock last night using:
Security Patch Level 2017-12-01
Product code SWC
PDA G920FXXS5EQL5
CSC G920FVFG5EQJ5
The first try failed at hidden.img and I used a pit file and suceede the 2nd time to successfully stock flash.
I used ZEROFLTE_EUR_OPEN_HIDDEN200M.pit which is multi CSC to support SWC which is what I need for OTA Updates.
I do not want to root my phone again but don't mind reflashing/resetting/factory resetting.
Samsung Info App now shows:
Product Code: SM-G920FKZESIM
Original CSC Code: <BLANK>
Firmware CSC Code: SIM
Active CSC Code: SIM
Available CSC Codes: ATL, CNX, CYV, MOB, MTL, OMN, SIM, SWC, tCL, VD2, VDC, VDF, VDH, VGR, VIP, VOD
CSC Country: Slovenia / SI
Mobile Operator: SwissCom
How can I get the CSC Code set to SWC? I want to get Voice over IP calling working which SwissCom says should be working.

Any advice on next move?

try this, not sure if it works: *#272*imei#* -Display/change CSC code

Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: SWC
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.

Hi forumber2 - Thanks for the detailed response. I ran through the steps but the phone still shows Slovenia CSC. I then did a factory reset and still the same.
The Samsung Info app actually shows the same data as before:
Product Code: SM-G920FKZESIM
Original CSC Code: <BLANK>
Firmware CSC Code: SIM
Active CSC Code: SIM
Available CSC Codes: ATL, CNX, CYV, MOB, MTL, OMN, SIM, SWC, tCL, VD2, VDC, VDF, VDH, VGR, VIP, VOD
CSC Country: Slovenia / SI
Mobile Operator: SwissCom
Still no VOIP calling. Even had my provider send me a new SIM card,

Related

Stock ROM falsh Error for galaxy s6 SM-G920P

While installing TouchWiz stock Firmware (Marshmallow 6.0.1) on my galaxy S6 (SM-G920P) via Odin 3 I got an error sw rev Device:4 Binary:1 error.
How do I fix it.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920P
Region: SPR
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920P
Region: SPR
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
Click to expand...
Click to collapse
Thanks Man. It worked. My phone is up and running
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920P
Region: SPR
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
Click to expand...
Click to collapse
I did this as you described and I still got a FAIL from Odin. Any ideas would be awesome...

Error message "sw rev check fail device 5 binary 3" Samsung Galaxy S6 Eadge

Hello!
I have Samsung Galaxy S6 Edge
Device Name : Galaxy S6 Eadge
Android Ver : 6.0.1
Model Number : SM-G925S
Base Band : G925FXXU4DPK1
Build Number : MMB29K.G925FXXS5DPQA3
I rooted my device using CF-Auto-Root-zeroltetmo-zeroltetmo-smg925t.zip through Odin and every things went well!
then I tried unroot it by flashing official ROMs:
XSG-G925FXXU3QOLO-20160108140221
KSA-G925FXXS4DPH8-20160830112410
but after 1 or 2 seconds i get this Error:
"sw rev check fail device 5 binary 3"
Any one can help me please!
I have read all thread about subject but nothing helps.
Kindly your brother Andrew.
Email : [email protected]
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G925F
Region: XEU
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G925F
Region: XEU
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
Click to expand...
Click to collapse
Thank you Very much brother.
I 'll try it an i 'll send feedback.
thanks again.

I want to sell my S6 Edge need original stock rom?!

Hello guys, im going to sell my S6 Edge and get an S7 Edge at a good price...im doing this mainly because the S7 edge has more battery and thats all really..
The point is that i want to flash a stock rom before selling my s6e...im from italy my phone is not branded and is the international version the G925F....Where do i find the right stock rom? i want to flash a Stock rom with 3 files cause right now i have btu csc and i want to put everything as it was when i got the phone with italian csc etc...so who ever buys it can update it normally...
SamFirm > Binary Nature > Odin + re-Partition > You're done
iDroid27210 said:
SamFirm > Binary Nature > Odin + re-Partition > You're done
Click to expand...
Click to collapse
Can you explain it better? I dont know where to find the right stock firmware from italy and not branded..
Use this tool (not the website !) : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Once you opened it, fill the boxes :
Model : SM-G925F (S6 edge int.)
Region : ITV (Italy unbranded)
Check Binary Nature box then Check Updates
Then uncheck Check CRC32 and check Decrypt automatically and do DOWNLOAD
(now wait because 2.5GB could take time ~)
When "Decryption finished." appears, close SamFirm then extract the ZIP archive in your documents (delete the enc file).
With the latest Odin version (3.12.3 available here : https://forum.xda-developers.com/showthread.php?t=2711451)
Download the S6 edge PIT here : https://mega.nz/#!9A4hQD7T!NIG6GXH40pGUP6kfWMF0WnXxLXMqQybfo4FOheu0rn8
In Odin, fill BL, AP, CP and CSC by the files you extracted.
Then go on PIT and select the PIT you downloaded.
On options, ensure that these options are checked :
Auto Reboot
F. Reset Time
Re-Partition
Nand Erase All
Then, put your phone into download mode and start flashing !
iDroid27210 said:
Use this tool (not the website !) : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Once you opened it, fill the boxes :
Model : SM-G925F (S6 edge int.)
Region : ITV (Italy unbranded)
Check Binary Nature box then Check Updates
Then uncheck Check CRC32 and check Decrypt automatically and do DOWNLOAD
(now wait because 2.5GB could take time ~)
When "Decryption finished." appears, close SamFirm then extract the ZIP archive in your documents (delete the enc file).
With the latest Odin version (3.12.3 available here : https://forum.xda-developers.com/showthread.php?t=2711451)
Download the S6 edge PIT here : https://mega.nz/#!9A4hQD7T!NIG6GXH40pGUP6kfWMF0WnXxLXMqQybfo4FOheu0rn8
In Odin, fill BL, AP, CP and CSC by the files you extracted.
Then go on PIT and select the PIT you downloaded.
On options, ensure that these options are checked :
Auto Reboot
F. Reset Time
Re-Partition
Nand Erase All
Then, put your phone into download mode and start flashing !
Click to expand...
Click to collapse
Isnt there an easier way? it says that tool is deprecated, i downloaded the latest rom from updato http://updato.com/firmware-archive-select-model?record=31F6CFE2AE0E11E6B04AFA163EE8F90B...what do i need to do now?
It's not. You downloaded the one part firmware, which not contains all parts of the full firmware. Download the Binary Version though SamFirm, that isn't deprecated (just an dishonnest advertisement for his new firm website).
iDroid27210 said:
It's not. You downloaded the one part firmware, which not contains all parts of the full firmware. Download the Binary Version though SamFirm, that isn't deprecated (just an dishonnest advertisement for his new firm website).
Click to expand...
Click to collapse
Thanks bro, everything worked perfectly...your amazing man :good::good:
I just had a problem with the net framework 3.5 installation, i have my windows updates disabled and had to enable it to install net framework 3.5 so i can use the samfirm tool...
now i just hope someone will buy my s6edge as fast as possible. :fingers-crossed:

Downgrading SM-G920F Still Possible?

Hello.
Is it still possible to downgrade a SM-G920F from 7.0 to 6.0.1?
I'm currently on:
Baseband G920FXXU6ERF6.
Build NRD90M.G920FXXU6ERF5.
Security patch 1 June 2018
Reason for downgrade is a month ago the device started running extremely slow. Intermittent disk i/o 90% to 100%.
I've factory reset a few times and cleared cache and it seems ok, but after updates the problem reappears.
I've used package disabler pro to stop bloatware apps running. Still the same.
I'm currently downloading PDA G920FXXU5DQA7 CSC G920FBTU5DQA2 from sam mobile.
Many thanks
Richard
You can't downgrade with G920FXXU5DQA7.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XTE
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.
Thank you for the reply mate. I'll give it a go
Thank you mate. That worked perfectly. Phone seems to be running much better now

Stock rom

Since I can't find the thread about How to return to stock here. I've decided to follow instructions on youtube. Downloaded the right variant for my model. Followed the procedures on Odin (using the latest version). Everything is okay until I'm kinda stuck at the logo for a couple of minutes. What could go wrong? Installation by odin was successful (PASS!).
SM-G925K variant
I assume that your device is SM-G920F.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G925K
Region: KTC
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.

Categories

Resources