I have gone through several xda forums. But I think my problem ia different. Whenever I try to flash stock ROM through ODIN into my Samsung Galaxy S6 (SM-G920F) It checks everything as it would normally. When I press start, it goes very fast showing system.img recovery.img and blah blah all. But all of a sudden, it fails
While flashing, it doesn't even take enough time that is required to flash a normal Galaxy S6. All those texts are written in the ODIN window within 10 seconds.
I flashed Noble Nougat Experience 3.1 by @AlexisXDA
But OTG isn't working. So I wanted to revert. But now, I can't. Any help would be appreciated
What's the error in Odin when it fails?
This can determine where the fault lies, also try another usb cable as I've had flash fails due to usb cable.
In the mean time you could try one of the other stock custom roms, otg doesn't work in NNE because of the kernel.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
_s.w.a.p.n.i.l_ said:
I have gone through several xda forums............................ But now, I can't. Any help would be appreciated
Click to expand...
Click to collapse
Hey Swapnil, use SmartSwitch on PC and go for Device Initilization, your problem will be solved.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
Click to expand...
Click to collapse
Thanks man. This tutorial really woked. I don't know why it couldn't intake firmware from sammobile through normal ODIN. But it's back to stock finally. Thanks again. Thanks everyone.
Related
Hi. I use Galaxy S6 SM-G920FQ and I installed a custom rom.
Rom has problems and I want to return original rom but I couldn't.
I wonder "What can I make with twrp?" and made mistake. I changed file system.
So I can't enter to twrp and I don't know what to do. Anyone have information about this? :crying: :crying:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: PHN
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
I get this after trying to flash rom
http://prntscr.com/id7qsk
Phone shows ''An error has occurred while updating device....use emergency recovery...'' which doesnt even work...
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
Click to expand...
Click to collapse
Thank you, spent whole day trying different things...
I have a Galaxy S6 Flat G920I running Ressurection Remix on Android 8.1.0, I already tried flashing the stock rom with Odin but it gave me an error no matter how many times i tried. Is there another way to flash the stock rom?
Just flash in TWRP any custom stock rom.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920I
Region: NPL
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920I
Region: NPL
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.
Click to expand...
Click to collapse
THANK YOU SO MUCH IT WORKED
I had so many problems with rr and now i can have the stock rom back without the few bugs plus i can get full samsung support
Since I can't find the thread about How to return to stock here. I've decided to follow instructions on youtube. Downloaded the right variant for my model. Followed the procedures on Odin (using the latest version). Everything is okay until I'm kinda stuck at the logo for a couple of minutes. What could go wrong? Installation by odin was successful (PASS!).
SM-G925K variant
I assume that your device is SM-G920F.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G925K
Region: KTC
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.
Can anyone help me with downgrading from Pie? I would be very grateful for a link to a guide/tutorial how to flash stock mm/nougat/oreo ?
Thank you
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XSG
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.
Samsung may have updated the bootloader to prevent rolling back to a previous version of Android.
Sanrell said:
Samsung may have updated the bootloader to prevent rolling back to a previous version of Android.
Click to expand...
Click to collapse
You can't downgrade to Lollipop but you can downgrade to Marshmallow or Nougat.
i get error on flashing hidden.img... please help