Related
Today i played with my Vodafone 845 and tried to flash a new Custom Rom.
Somehow i pressed the wrong buttons(Power+VolumeUp+EndCall) for the Recovery and i got a new screen which i never saw before.
Does anybody know what this is, and if you can use it to flash the original firmware onto the device?
I added a photo of the Phone.
its normal dont worry
you pressed the keys for huawei update
when you have an update from huawei it self you must do this for flashing it
sorry for my english
thanks
thanks for the reply,
i have an update file from huaweidevice.com and i would like to restore the device to the original state, do you know how i can do it with this firmware screen, where do i have to put the file, sdcard, specific folder ?
thanks
I have some error.
I have downloaded file from huaweidevice V845 V100R001NZLC02B233SP01 (New Zealand Vodafone)
And i have error after unpack
I have an IDEOS but it'll be the same procedure.
Put the dload folder from your update zip file on the root of your sdcard.
Do what you did to get to that screen and the flash will happen.
That's all there is to it.
nobreak1970 said:
I have an IDEOS but it'll be the same procedure.
Put the dload folder from your update zip file on the root of your sdcard.
Do what you did to get to that screen and the flash will happen.
That's all there is to it.
Click to expand...
Click to collapse
What was done:
1) format the memory card
2) reset all settings
3) Download (V845 V100R001NZLC02B233SP01 (New Zealand Vodafone) from huaweidevice
4) Copy dload \ UPDATA.APP
5) Volume Control Upper Key + End Key + Power Key
And at first wrote unpacing, and then update fail
and in is the file sd_update
Code:
**** SD download log
****
Failure: AMSS ° x ± ѕZhҐEdK § ° b.
Failure: operation did not succeed.
Failure: operation did not succeed.
Failure: operation did not succeed.
Failure: operation did not succeed.
Failure: operation did not succeed.
dload_sd_ram_data_proc-> (retry> = DLOAD_RETRY) failed!
I don `t know what to do.
At this moment the phone superboot + amonrarecovery
and V845 custom rom by Leito
Excuse me for my english.
New Zealand Vodafone 845
Hi.
I have installed the New Zealand rom, extracting the folder dload with the UPDATA.APP file inside. Then i copied to the root of the microSD card using a card reader.
Then on android, on Definitions->Storage...-> Update Software and confirmed. The phone went normal and everything was erased.
This version is quite stable but has too much icons of Vodafone, not to mention that is allways asking to register on Vodafone Website.
Huawei Ascend G6 - L11 How to Update to Kit Kat when the normal update does not work and gives error. (as happened to me from Rom B127 to B370 )
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
>
I already flashed more than one time, in tests , doing the versions , etc. , and all ways work .
But, as in the other version , there are who may have difficultys ...
>
>
>>>B370_V3<<<
>
-->First need the unlocked bootloader :
Send the following e -mail to - [email protected] and [email protected]
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 - (your default version) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( the key pad *#*#1357946#*#* )
Thank you for your attention
( Your name)
>
>
ABD Terminal - https://meocloud.pt/link/e2bcfbb5-1971-476d-b26c-1e5f8037e92f/ADB Terminal.zip/
>
TWRP. recovery - is in the ADB folder from above
>
copy the ROM to external SD Card. (see what is write in /data/custom.bin, open like a text file and choose the ROM with the same ref.)
if there is no ROM with your defenitions you can fix in the end of flash, choose B370_V3 and change vodafone to the first name you find in custom.bin, enter the folder and change the second folder name with the second name you find in custom.bin, exemple my was vodafone/pt, so my first folder is vodafone and the inside, the second folder, is pt. Always small fonts and do a factory reset.
>
> Turn OFF the phone
>press vol - and power (fastboot mode)
>extract ADB descktop and open it in cmd ( the cmd inside ADB is from windows 7 64BIT, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>write in ADB:
fastboot flash recovery TWRP.img
> when finish the flash, press vol + and power
> go to install and choose your ROM
>install ( you can read the steps in flash, look at it)
>Phone reboot in to boot loop,
>press VOL + and dont release to go to recovery
>in recovery do factory reset, and do reboot system
>set defenitions in the phone (wifi, google,etc)
>reboot
>DONE
------------------------->What are the differences ?
> Comes with root (kingUser) and BusyBox
> The Clean version - No google apps and no default games ( apps can be found on google play)
> Full version - cames with all ( games, Facebook, etc)
>same build.prop tweaks
>better image
>faster
>and faster boot
Versions i made:
Vodafone PT Full version- https://meocloud.pt/link/ae253a50-b512-4fd9-9a55-24132a2401b7/Full__B370_V3.zip/
Vodafone PT clean version- https://meocloud.pt/link/46612166-3068-46aa-a4c9-58d9688b4c2d/Full_and_clean_B370_V3.zip/
Vodafone RO Full Version - https://meocloud.pt/link/40ebddae-1c21-4428-9c74-e3775144799d/VDF_RO_Full__B370_V3.zip/
Hw SPS Clean Version - https://meocloud.pt/link/9d8520dd-e0df-42d0-af9d-e07c92c86f21/hw_spc_Full_and_clean_B370_V3.zip/
>>>>>>>>>>>>>>>>>>>>>>>> NEW <<<<<<<<<<<<<<<<<<<<<<<<<<<< 23-04-2015
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0ae8-4815-b7a1-d8bc65a3f259/VDF_HU_CLEAN__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a036-46c9-a483-7476e03d308c/HW_NORMAL_Full_and_clean_B370_V3.zip/
>
>
> If you whant to try a DEODEX ROM go here:
http://forum.xda-developers.com/ascend-g6/development/deodex-huawei-g6-l11-kitkat-t3093611
Enjoy
>
>
Bluetooh tethering is off by default but can be turned ON!
For those who lack the Bluetooth Tethering :
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
reboot.
Someone in Huawei thought we would no longer use it!
>
>
>
*Any Bug that you find please say.
There are many versions of the /cust , so it is possible that in the end, is missing Huawei applications like backup, and themes do not work, but can be repaired .
The ROM already have root, install the root browser , go to /data/custom.bin folder and open as text, in my custom.bin says vodafone/pt so my folder inside the /cust says vodafone, and the inside vodafone says pt. Change as it says on your custom.bin . Do a factory reset, Done.
Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
See the comments on Facebook:
https://www.facebook.com/groups/328261053999820/440388999453691/?notif_t=group_comment
persona78 said:
Huawei Ascend G6 - L11 Update to Kit Kat (From B127 to B370).
Good News for B127 users!
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
This is all tools and img you need:
https://meocloud.pt/link/1b4a9bd1-c9ad-4832-a366-b3522464f3fb/B127 to B370/
>B370_V2 is a ROM for Vodafone Pt (if you custom.bin says vodafone/pt)
>VDF_RO_B370_V2 is a ROM for Vodafone Ro (if you custom.bin says vodafone/ro)
In the end are missing apps, like clock, or themes dont work? Is because in /data/custom.bin says different than /cust from the ROMs from above, but dont have importance . You can fix it.
To fix /cust, in the end and with root, change the names in /cust folder, for the names in YOUR /data/custom.bin (open like a text file), use root browser to do it.
exemple in my /cust , first folder says vodafone" and inside "pt" because my custom.bin says "vodafone/pt". If yours says ee/es you must change "vodafone" to "ee" and "pt" to "es".
In the end YOU MUST DO a factory reset and all be fixed.
In my ADB TOOLS folder you have all ready system, twrp and default recovery img.
... For those who have already upgraded from the old tute ... you have to put the B127 again, only flash , nothing more, dont need to fix /cust.
(A) - Copy B127 dload folder to ext sd. With phone off press vol up + vol down + power, release power when turn on, release all when start.
ROM B127 (in case of emergency will need it) (A)
https://meocloud.pt/link/1403dc42-8...ei_Ascend_G6-L11_V100R001C00B127_General.rar/
Now:
Copy to external card the following:
>B370_v2.zip or VDF_RO_B370_V2
>UPDATE-Kinguser-3.4.0.zip (if you whant to root)
Open adb terminal ( attention , if you use a different version of windows than 7, you will have to copy c: \ windows \ system32 \ cmd.exe to adb terminal folder replacing what is there ), open by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery twrp.img
press vol + and power , install (B370_V2.zip) or (VDF_RO_B370_V2.zip), (DO NOT TURN OFF THE PHONE, YOU WILL BRICK, IF HAPPEN FLASH B127 AGAIN)
, press vol - and power AND DONT RELEASE!!!!!!!! RELEASE ONLY WHEN SEE FASTBOOT MODE!
write this:
fastboot flash system system.img
fastboot reboot
Turn ON ignore everything and make factory restore.
Congratulations! You are on B370, completed. laugh: )
To root:
Open adb terminal by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery twrp.img
press vol + and power
>install UPDATE-Kinguser-3.4.0.zip
Advise you to return to put the default recovery
Open adb terminal by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery recovery.img
>fastboot reboot
With root is possibel to remove system app like Facebook or games, use this app:
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en
Any Bug that you find please say.
See comments in Facebook: https://www.facebook.com/groups/328261053999820/permalink/440388999453691/
------------------------------------------------------------------------------------------------------------------
-----> (I think is possible to update other ROMs for the G6 - L11 . I cant test this.)
-----> (I think that also works in the L22 , L33 , as they have the same kernel than L11, and this update does not change the oesmbl signature . If someone try leave the feedback for other users.)
I can not make a promise to recover your default ROM because I never did before for this model above, but if you want to try to need you to do this first:
root:
install root browser
go to /dev/block and copy to sd card all files from mmcblk0p1 to mmcblk0p25 ( i dont remeber if 25 let copy...)
do it 1 by 1, than in pc do a zip, i you need may be i can do a recovery for your default ROM from this files.
Enjoy
Click to expand...
Click to collapse
Thanks, works great after I chaged my cust folder from Vodafone/pt to dt/pl :good:
You're welcome
mngt13 said:
Thanks, works great after I chaged my cust folder from Vodafone/pt to dt/pl :good:
Click to expand...
Click to collapse
I'm glad I helped you .
Works perfectly
Worked like a charm for me.
Thank you very much.
But I have a question.
I looked inside the zip file. It extracts the img files and writes them to the block devices which is a great idea. Bravo!
But why didn't you do the same thing for system.img? Why flashing it through fastboot?
Hi! In my first try I had system in zip, but phone bricks, I don't know way.
But I have a new versions, they are completed, one clean (no games, and no google apps like music, etc, etc) the other is normal, and came all ready rooted and with busibox. Build.prop came tweaked to.
I saw you uploaded some *FULL* versions as well and put system.img inside them.
Putting system.img inside the zip works? I thought maybe because of the huge size of system.img and the fact that G6-L11 has only 1GB of RAM, it might fail.
P.S.:
Why do you mount system and cust and then unmount them afterwards?
Mount and unmount to force and link data, and all works I flash more than one time this version.
Dont stay in Ram because write directly in the images.
Boot loop when reboot but when go to recovery it is fixed.
very nice work persona78, and thank you for the explanation.
Hi there persona, glad i found your tutorial. It saved me from the B127 hell!
Only one question, is there any way to solve the 4G issue. It is always there even if we turn of mobile data.
Btw, after we install the B370 can we downgrade to B118 or it will get stuck with B127 again? And of we can does it have to be with twrp or normal SD update?
Thanks in advance,
Queiroz
Hi! That is not a issu, if says 4G is because is plugged to 4G, don't mean is sending or receiving data, To switch network, go to short cut bar and press network data icon and dont release, in that menu you can change your net work, 2, 3,4G. From default update.app, no but I have a zip file to do, why roll back? The oesmbl from updates same times dont match and do issus. The zip do a bypass on oesmble check.
Wow that was a fast reply, thanks I thought it was a problem from the ROM. The only reason I wanted to downgrade was because I thought it was a "ROM bridge problem". Since huawei recommends that we upgrade from 118 to 370. Thanks a lot though.
Queiroz
They say to update from b118 because b370 have the same oesmble, but, like I say, my zip file do a bypass and ignore that
Could you please explain the difference between this versions?
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0a...__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a0...n_B370_V3.zip/
The first is for Vodafone hu ( with /data/custom.bin vodafone/hu )
The sec is the default that came with rom ( with /data/custom.bin hw/normal )
persona78 said:
Huawei Ascend G6 - L11 How to Update to Kit Kat when the normal update does not work and gives error. (as happened to me from Rom B127 to B370 )
Works in others ROMs and phone versions( P7mini).
It does not work in L22 and L33 , although it is the same phone, but the provider configuration is totally different, frequencies , network codes, etc.
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
>
I already flashed more than one time, in tests , doing the versions , etc. , and all ways work .
But, as in the other version , there are who may have difficultys ...
>
>
>>>B370_V3<<<
>
-->First need the unlocked bootloader :
Send the following e -mail to - [email protected] and [email protected]
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 - (your default version) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( the key pad *#*#1357946#*#* )
Thank you for your attention
( Your name)
>
>
ABD Terminal - https://meocloud.pt/link/986dfd7e-1d97-4458-9806-a576ceb90084/adb terminal/
>
TWRP. recovery - is in the ADB folder from above
>
copy the ROM to external SD Card. (see what is write in /data/custom.bin, open like a text file and choose the ROM with the same ref.)
if there is no ROM with your defenitions you can fix in the end of flash, choose B370_V3 and change vodafone to the first name you find in custom.bin, enter the folder and change the second folder name with the second name you find in custom.bin, exemple my was vodafone/pt, so my first folder is vodafone and the inside, the second folder, is pt. Always small fonts and do a factory reset.
>
> Turn OFF the phone
>press vol - and power (fastboot mode)
>open ADB in cmd ( the cmd inside ADB is from windows 7 64BIT, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>write in ADB:
fastboot flash recovery TWRP.img
> when finish the flash, press vol + and power
> go to install and choose your ROM
>install ( you can read the steps in flash, look at it)
>Phone reboot in to boot loop,
>press VOL + and dont release to go to recovery
>in recovery do factory reset, and do reboot system
>set defenitions in the phone (wifi, google,etc)
>reboot
>DONE
------------------------->What are the differences ?
> Comes with root (kingUser) and BusyBox
> The Clean version - No google apps and no default games ( apps can be found on google play)
> Full version - cames with all ( games, Facebook, etc)
>same build.prop tweaks
>better image
>faster
>and faster boot
Versions i made:
Vodafone PT Full version- https://meocloud.pt/link/ae253a50-b512-4fd9-9a55-24132a2401b7/Full__B370_V3.zip/
Vodafone PT clean version- https://meocloud.pt/link/46612166-3068-46aa-a4c9-58d9688b4c2d/Full_and_clean_B370_V3.zip/
Vodafone RO Full Version - https://meocloud.pt/link/40ebddae-1c21-4428-9c74-e3775144799d/VDF_RO_Full__B370_V3.zip/
Hw SPS Clean Version - https://meocloud.pt/link/9d8520dd-e0df-42d0-af9d-e07c92c86f21/hw_spc_Full_and_clean_B370_V3.zip/
>>>>>>>>>>>>>>>>>>>>>>>> NEW <<<<<<<<<<<<<<<<<<<<<<<<<<<< 23-04-2015
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0ae8-4815-b7a1-d8bc65a3f259/VDF_HU_CLEAN__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a036-46c9-a483-7476e03d308c/HW_NORMAL_Full_and_clean_B370_V3.zip/
>
>
> If you whant to try a DEODEX ROM go here:
http://forum.xda-developers.com/ascend-g6/development/deodex-huawei-g6-l11-kitkat-t3093611
Enjoy
>
>
Bluetooh tethering is off by default but can be turned ON!
For those who lack the Bluetooth Tethering :
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
reboot.
Someone in Huawei thought we would no longer use it!
>
>
>
*Any Bug that you find please say.
There are many versions of the /cust , so it is possible that in the end, is missing Huawei applications like backup, and themes do not work, but can be repaired .
The ROM already have root, install the root browser , go to /data/custom.bin folder and open as text, in my custom.bin says vodafone/pt so my folder inside the /cust says vodafone, and the inside vodafone says pt. Change as it says on your custom.bin . Do a factory reset, Done.
Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
See the comments on Facebook:
https://www.facebook.com/groups/328261053999820/440388999453691/?notif_t=group_comment
Click to expand...
Click to collapse
hi the ADB terminal link is down can you reupload it ? thank you
and does it also work on g6-U10?
Thank you, I will correct it.
The tutorial is for G6 L11 but ADB works in every model.
ADB FIXED!
yildirim400 said:
hi the ADB terminal link is down can you reupload it ? thank you
and does it also work on g6-U10?
Click to expand...
Click to collapse
Hi have fix the ADB link!
Hi, I flashed your Vodafone PT clean version with a success. Thank you!
I have a question:
Is EMUI 3.0 for g6 different from EMUI 3.0 on other devices?
As I saw that lockscreen on honor p6 have a settings icon thus can be customize whilst our doesn't. at least I haven't find a way to customize lockscreen. also there is magazine unlock feature missing from it.
Thank you.
The lock screen, that can be change with a theme, when you install a EMUI 3 theme, same settings like lock screen, or music widgets can be changed.
persona78 said:
Thank you.
The lock screen, that can be change with a theme, when you install a EMUI 3 theme, same settings like lock screen, or music widgets can be changed.
Click to expand...
Click to collapse
Thanks for the reply.
I found some P8 stock themes that includes unlock magazine feature and it works with g6 L11.
here is a link to mega:
https://mega.co.nz/#!zB0HxaCb!Yb7Q1ZfheM_Xt7o1Oe_WVks1mw9xbDV78FQ-BnqtHSc
file has 157.1 MB
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY IT AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So, you need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->->extract dload folder from B118
->paste in to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->extract dload folder from B370.
->Delete dload from B118 from the external sd card and paste the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
---------> Or you can find it with DC-Unlocker
1. Download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!S95yRYbY!vxh7daocU-_q4bXb4cu88b_UMqybJxt8Fh24z9mmcck
----------------------------------------
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
persona78 said:
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->Extract to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->Delete dload from B118 and extract to external sd card the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
Click to expand...
Click to collapse
I followed instructions and flashed B370. Now my home button is not working
You have G6 L11?
persona78 said:
You have G6 L11?
Click to expand...
Click to collapse
G6-L33
"the same as L22 and L11"
Sorry, Its the same is true, but this is for Europe and files are diferent from Colombia, thats way the issue..
It does not work in L22 and L33 , although it is the same phone with the same kernel, but the provider configuration is totally different, frequencies , network codes, etc.
I did not know because no one yet with these models had reported , I found this incompatibility shortly ...
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
works great . thanks a lot man
i updated to B370 successfuly, everything working fine except Motion Control. when i go to "Motion Control" in Settings, there is nothing there (a blank white screen).
I remember this problem was in P6 EMUI 3 too and a patch was there to fix it. any patches for G6?
Same thing goes rong. Sensors must work! Or pictures rotate?
If not, flash b118 again, than b370. Don't forget factory reset after change cust folders names.
:good:
Excellent guide, you did a summary of four different things in one and easy to understand. For your mastery of the subject I wanted to ask your help to use my Huawei G6-U00 with firmware of China, which has unlocked WCDMA 1900 MHz band, so I can not use the phone in 3G in Venezuela.
Is there a way to unlock it?
I have tried to Engineer Mode, but it asks a code that is not known Huawei (0, 0000, 1234), . Also I tried the QPST program, but despite being recognized as a modem, do not read as a telephone and does not communicate with the RF_NV_Item_Manager.
Thanks in advance!!
Mario
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
oemsbl version list check error!
persona78 said:
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
Click to expand...
Click to collapse
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
marioarnaldo1965 said:
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
Click to expand...
Click to collapse
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Oesmble problem
persona78 said:
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Click to expand...
Click to collapse
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
marioarnaldo1965 said:
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
Click to expand...
Click to collapse
After you do backup with g6sknife, there is a tool you can use, is the rom extractor, is in g6skinfe to.
Extract system, cust modems.
Copy system to cmd folder, boot in fastboot (bootloader), use cmd option, than flash system if fail you need to restore your backup, because you stay with out system, if you get success, put cust and modems in backup zip and use cwm to flash it. If you get success to, you need to change cust to your provider.
Sent using XDA One
G6_L11 problem after update...
Hello...
I have a G6-L11, Digitel Venezuela ...
Since I did ROM upgrade, the gyroscope and proximity sensors do not work, either lighting and ...
What can I do..??
problem with g6 rom
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
freduce said:
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
Click to expand...
Click to collapse
First, if you have a U10 why you flash a U00 ROM? ...
Google G6 U10 b146, try to install it.
Tell if you made it?
G6 ROMS
There are a lot of steps to do.. Open Bootloader, Root the Phone, Install Custom Bootloader, Flash a new Rom for G6-U10.
All these Steps are full Explained in GG Development Group in Facebook.
Send a request join message, and in Pinned Post. Read , read and read. There are a lot of information and a ROM that fit your ROM. What does it mean UE in your Question? United States? Union Europa´s? the ROMS are quite different.
.....
some of these links have been 'removed'
please
can you like please fix the link
:good:
Hello folks,
Bought a Mediapad T3 7 from Walmart recently. Has anyone found root yet? I tried all of the Kingroot, etc. APK's so far. Don't waste your time. Tried them all.
If our magicians here can find root, I'd love it!
Thanks,
Rich
Got the same request. Tried KingRoot and iRoot, cause you never know
I'd imagine it's coming one day or another. Tablet isn't that old yet.
Just a matter of somebody compiling twrp for it, I'd imagine..
I would love to know if any progress has been made. I need TWRP and an AOSP ROM. I love the devices look and feel, and its bluetooth operability. but absolutely DESPISE the UI and how it operates.
+1. Decent little tab but no built-in ext4 format for external SD, hoping for root. Getting it to run on stock android would be neat, too.
I tried the online root solutions-none of them work. Just tried Kingroot today and no good.
Same here I got a new huawei t3 10" great tablet by the way but no way I can root it.. I've tried all the Internet suggested ways and nothing seem to work at all but I manage to get the Device ID typing a code in the dialer.
Mercer99 said:
Same here I got a new huawei t3 10" great tablet by the way but no way I can root it.. I've tried all the Internet suggested ways and nothing seem to work at all but I manage to get the Device ID typing a code in the dialer.
Click to expand...
Click to collapse
hi, are you able to make calls on your T3 10? If yes, can you let me know your firmware details, thanks
buddimanv said:
hi, are you able to make calls on your T3 10? If yes, can you let me know your firmware details, thanks
Click to expand...
Click to collapse
Hi there, about that yes I can make phone calls with it I bought the Model with the 4G option (there is 3 models from the same Huawei tablet one of them is WiFi only and the other two can make phone calls) also I managed to unlocked the bootloader by using the device ID I got earlier and Huawei website.
mine is AGS-L09 model
Thanks Mercer99, appreciate it (for your device security, can you remove the image as this has your IMEI)- we have the same model, but different firmware.
AGS-L09C199B002 is “Saudi Arabia Oman Kenya Cameroon Jordan Qatar Ghana Android 7.0 EMUI 5.1” region.
AGS-L09C127B031 is “Greece Hungary United Kingdom Nonspecific Android 7.0_EMUI” . The dialer/calling function is disabled on this firmware - confirmed on Vodafone and EE network.
Is there any way you can extract the OEMINFO from your device and share it with us. This should enable me to debrand the phone if I can find your firmware (downloaded EUROPEAN version with Firmware finder already – so really need an European OEMINFO).
My phone is still locked to Vodafone so I am not sure whether I can flash the firmware or even need root to flash a different OEMINFO (bootloader is unlocked already).
Sorry buddimanv I would love to help but I don't know how
OEMinfo
Last time I did was with P9 Lite - changing from EE to European firmware using a tool (I think SRK Tool or “VNS-L21/22/23/31 [EU] Toolkit [0.0.0.12] All-in-One”) but it was rooted - seems like root is needed before anything. I think the process would be to change the firmware on tablet as well.....
I was hoping as bootloader is unlocked, we can retrieve OEMINFO from fastboot or something and debrand….would be good if anyone can clarify.
Possible Root Solution
Anyone prepared to test rooting method below?
How to install Magisk with ADB
How to install Magisk with ADB
Does not require the availability of custom recovery and root-access
1. Delete all other types of root-access and restore the partition image of the boot partition
2. Download Magisk v13.6 or later and download / unzip from the firmware partition image of the boot partition
3. Unpack the Magisk archive, put the boot image of the boot partition in the same folder, and rename it to boot.img
4. Rename the folder with the name corresponding to the architecture of your device (arm, arm64, chromeos, x64, x86), in magisk_inject
5. In the terminal, change the current directory to the folder with Magisk and run the following commands one at a time:
PHP:
adb shell "rm -rf / data / local / tmp / *"
adb push META-INF / com / google / android / update-binary common magisk_inject boot.img / data / local / tmp
adb shell "cd / data / local / tmp / magisk_inject; mv ../common/*.; chmod 755 *; sh ../update-binary indep boot_patch.sh ../boot.img; mv ../bin/ busybox busybox "
adb pull /data/local/tmp/magisk_inject/new-boot.img
adb shell "cd / data / local / tmp; rm -rf * .img magisk_inject / *. img update-binary bin common"
6. To flash the resulting boot partition image with the name new-boot.img
PHP:
fastboot flash boot new-boot.img
7. Download the system and make sure that Magisk Manager is installed and that its version corresponds to the version of Magisk. If not, manually install the correct version of Magisk Manager.
Click to expand...
Click to collapse
or follow original post
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
Click to expand...
Click to collapse
Bootloader can be unlocked easily of course (code is given immediately) - here
I am tempted but trying to control myself as I don't have a copy of my existing firmware to revert back via dload method if something goes wrong. However, AGS-L09C199B003 firmware is available, so if it fails, I believe you can always go back to stock. I have a feeling this will work.
Took a risk and its rooted now - Magisk v14.0 installed fine and seems to be working (need to test further). Also, Vodafone unlocked the device now for me
Challenge now is to debrand so as to enable functions which has been disabled by Vodafone (namely calling).
Would appreciate if anyone can help - need OEMINFO from another region so as to change the firmware, especially European one or even other UK network who does not disable calling.
Could not contain myself…. In my quest to debrand so I can have a dialer/phone calling function, downloaded a firmware (either from FF Team or on the internet), tried flashing system.img file to see if it installs the dialer as it would not install extracted ones and it did not work. So tested with the boot.img and it did work but phone kept rebooting to eRecovery.
Restoring from TWRP (incomplete/untested) backup did not work. Can’t install any other regional firmware because of OEMINFO. eRecovery can’t find any firmware. The only thing – TWRP/Stock Recovery, eRecovery or bootloader!
Chatted with Huawei support and they won’t give me a link to download the firmware – want me to send for repair, which I don’t really want to – too much hassle and they may end up blaming me anyway….lol He agreed to upload one to their website if he can find one.
I would appreciate if anyone can give me an OEMINFO or link to EUROPEAN firmware with a dialer….. I think European one is AGS-L09C127B031CUSTC127D002 – would appreciate if anyone can share the file with me.
Mercer99 said:
Hi there, about that yes I can make phone calls with it I bought the Model with the 4G option (there is 3 models from the same Huawei tablet one of them is WiFi only and the other two can make phone calls) also I managed to unlocked the bootloader by using the device ID I got earlier and Huawei website.
mine is AGS-L09 model
Click to expand...
Click to collapse
More details and links for the bootloader please, I really need a tutorial-thanks.
dorpmuller said:
More details and links for the bootloader please, I really need a tutorial-thanks.
Click to expand...
Click to collapse
What a buncha bull**** the huawei site is. I got there and when I go to type the product id# in it brings up a calculator dialog with digits I don't even have on the calc.
Done with huawei. All night effing with this is enough. Won't deal with bizarre companies. I'll stick with my samsungs.
I tried... thanks for all of your responses.
Rich
dorpmuller said:
What a buncha bull**** the huawei site is. I got there and when I go to type the product id# in it brings up a calculator dialog with digits I don't even have on the calc.
Done with huawei. All night effing with this is enough. Won't deal with bizarre companies. I'll stick with my samsungs.
I tried... thanks for all of your responses.
Rich
Click to expand...
Click to collapse
I got stuck on the calculator part too. I didn't see the parenthesis buttons. But I turn the tablet on its sit. the view turned horizontal and i was able to see more buttons available. Horrible design for the calculator app.
Hi guys, can someone finally root this Tablet? I would also like to install TWRP to install an AOSP ROM.
Thank you!
Hi.
Did anyone succeed unlock Mediapad T3 7 bootloader ?
I have model BG2-W09 wifi only (European version). I have problem get product id
which is necessary part for bootloader unlock on Huawei site. Stucked to the calculator thing,
when i'll enter ()()1357946()()= on the calculator - i will get ERROR.
Contacted with the Huawei customer service for the help and got not nice answer:
We are unable to send boot loader code via email and can only be obtained through our website.
If you would want to unlock your phone, you should meet the following conditions:
1.Please register your Huawei ID in our official website on your phone.
2.Log in and logout your Huawei ID continuously for 14 days.
3.Each Huawei ID should not apply for the unlock code more than fifth time within 6 months.
Early people informed that email support works fast, but seems now the Huawei tightened terms.
Now i can expect 2 weeks everyday login to meet the requirements.
Some comments about tablet, maybe following helps someone.
One strange thing i've noticed with the tablet, it's not so easy bring up fastboot / recovery menu.
Pressing volume down + power brings up Chinese language test menu (8 options), nowhere to go with that,
pressing volume up + power brings up dialog with 3 options, "Reboot system now" or "Wipe data / factory reset" or "Wipe cache partition". Pressing by same all 3 buttons, volume up + volume down + power brings
up message that update not succeeded, update file not found on sd card. Also if you press only volume down and connect micro usb cable, it brings you to the Chinese test menu again. Also weird why European version tablet has at all Chinese test menu ?
I have triple boot desktop computer and i've downloaded 3 latest adb and fastboot platform-tools packages, for windows (using 10), mac and linux. With windows, using cmd i can start adb session, query device,
seems like everything works, when i'll try:
"adb reboot bootloader", device just reboots back to the main. Tried the same with the Ubuntu, same thing, adb helps finds the device, but when trying: "adb reboot bootloader" device just reboots into normal, not going into fastboot/rescue mode.
The thing is different with the mac (OSX 10.12), when i'll type to the terminal:
"adb reboot bootloader" the device rebooting into the fastboot mode.... and the terminal not responding any further, example when quering: "fastboot devices",
but having already fastboot mode activated on tablet and when rebooting desktop into windows 10 or ubuntu, i'm able using fastboot, tablet responds to the: "fastboot devices" or "fastboot oem get-bootinfo", even "fastboot oem unlock" responds informing about not valid key...
So far i'm able to put tablet into fastboot mode only using mac. Hope that's useful info for someone struggling
with same problems.
Unfortunately bootloader is still locked, problem finding product id, Huawei also did not help.
Huawei product id generator did not recognise Mediapad T3 versions.
Any ideas how to find product id or maybe someone can share the unlock code ?
Thanks in advance.
This Phone has several releases according to country it is important, why
Do not attempt to customized versions of other countries, otherwise there is the risk of an unsuccessful upgrade and may introduce unknown problems.
Hardware Version of the software is only available for device models hardware, if you use other device models of software upgrades consequences may not boot.
Huawei Y6II Country Region list:
GLOBAL = INTERNATIONAL = GENERAL
AFRICA : South Africa, Angola, Algeria, Congo, Botswana, Tunisia, Egypt, Zambia, Nigeria, Ghana, Jordan, Kenya, Morocco, Mauritius, Namibia, Tanzania, Uganda.
ASIA PASIFIC : Thailand, Turkey, Azerbaijan, China, Indonesia, Australia, Vietnam, Bangladesh, Cambodia, China, Hong Kong, Japan, Malaysia, Kazakhstan, Laos, Myanmar, Nepal, South Korea, New Zealand, Philippines, Singapore, Sri Lanka, Taiwan, China, Uzbekistan,
EUROPE : Russia, Austria, Hungary, Belarus, Belgium, Bulgaria, Czech, Croatia, Denmark, Estonia, Finland, France, Germany, Greece, Italy, Latvia, Lithuania, Poland, Macedonia, Netherland, United Kingdom UK, Norway, Serbia, Slovakia, Spain, Portugal, Romania, Switzerland, Sweden, Ukraine.
LATIN AMERICA : Mexico, Bolivia, Argentina, Chile, Colombia, Brazil, Venezuela, Dominican Republic, Costa Rica, Ecuador, Guatemala, Jamaica, Peru, Uruguay, Panama, Paraguay.
MIDDLE EAST : Pakistan, Kuwait, UAE (United Arab Emirates), Saudi Arabia, Arabic.
NORTH AMERICA : United States USA , Canada
.
Region Codes:
C00 = China | C02 = Europe Vodafone |C10 = Russia |C170 = Russia |C21 = Telefonica / O2 |C40 = Czech Republic Telefonica / O2 |C55 = Italia TIM |C86 = Spain Yoigo | C112 = Latin America | C121 = Türkei | C123 = Switzerland | C150 = Telekom | C183 = New Zealand | C185 = Middle East & Africa | C271 = Malaysia | C249 = Serbia Telekom | C324 = Taiwan | C358 = Tunisia | C432 = Europe | C209 = Asia (Pacific) | C470 = Asia Pacific | C636 = Asia Pacific | C637 = Spain | C675 = India | C151 = India | C900 = Global | C605 = Colombia
This is important if you want to know whether you are updating right file or not. Let's find out how? Suppose, in your about phone, you see something like this, CAM-L21C10B141 now what's that mean? well it's pretty simple. CAM-L21 is model no of your phone. C10 is the region here it's Russia (check the list of country and region code). Now, B141 is incremental no of update (and it keeps incrementing.....wow). Here is some build code:
CAM-L21C223B131 -
CAM-L21C432B140 - Europe
CAM-L21C185B140 - Middle EAST
so first figure out your phone model and carefully download exactly similar firmware for you phone.
Basic Key Stroke to enter Mode:
<<< Enter Recover Mode >>>
Volume Up + Power button
<<< Enter Bootloader/Fastboot Mode >>>
Turn Off phone, Vol- and Conncet USB Cable
Or
From adb write: adb reboot-bootloader
<<< Enter Erecovery Mode >>>
Power on, Press volume up for 3 second
Updating Your phone
Always remember, charge 70% and your important data backup first. Update may erase all your user data
#1# Normal Update: Download Huawei stock rom. read carefully and download exactly same model firmware.
1. Your phone must have a stock firmware and stock recovery to flash this Stock Firmware.
2. Prepare a microSD card.
3. Download and extract the software upgrade package / Stock Firmware you'll find update.app file
4. Create a directory name "dload" folder at microSD and Copy update.app file (/Microcard/dload/..)
5. in your phone go to Settings>phone upgrade>System Software Update
6. Click the Three dot icon, choose local Upgrade > ok
or
6 Open the dialer enter: *#*#2846579#*#* Then goto ProjectMenu >Software Upgrade >SDCard Upgrade >OK
#2# Workaround update: Some cases you won't find "Loacal Upgrade" option in menu/upgrade may stopped in that case do this
1. Your phone must have a stock firmware and stock recovery to flash this Stock Firmware.
2. Prepare a microSD card.
3. Download and extract the software upgrade package / Stock Firmware you'll find update.app file
4. Create a directory name "dload" folder at microSD and Copy update.app file (/Microcard/dload/..)
5. Turn off phone, Wait 5 seconds
6. Press Volume up, volume down and power key at the same time. Upgrade will start momenterily
#3# Advance update method: This process is not recommended and unofficial. It might not work properly.
First you have to Seperate boot.img, system.img, recovery.img, cache.img, cust.img etc. files from "update.app" file. How to do that? There is two TOOLs to do that.
>> Huawei Firmware Extractor tool
>>> download and extract in C:\ drive
>>> Download activePerl.exe and install it. Without ActivePerl it won't work.
>>> Now Place "update.app" file to Huawei Firmware Extractor tool folder
>>> Now run “split_update”. A "output" folder will create immediatly (take some time to extract)
>>> Run “HuaweiFinder” script [this script will rename output file properly such as boot.img, recovery.img etc.)
>>> you are done!
>> Huawei Update Extractor Tool - Fast and easy
>>> download and extract in C:\ drive
>>> Download .net framework 3.5/4.6 above and install it. Without .net framework it won't work.
>>> open HuaweiUpdateExtractor.exe, here profile is unknown, show "update.app" file
>>> It will show all files, now select and extract your desired place.
>>> Done!
## Flashing Method 1:
Tools needed:
>> ADB-Fasboot tool
>> Hisuite installed for usb driver
>>> Copy "boot.img", "system.img", "recovery.img" in fastboot folder
>>> Reboot your device into fastboot (Turn Off phone, Vol- and Conncet USB Cable)
>>> Go to ADB Fastboot folder
>>> Press SHIFT key choose Open command window here and write these command
>>> fastboot flash cust cust.img
>>> fastboot flash recovery recovery.img
>>> fastboot flash boot boot.img
>>> fastboot flash system system.img
## Method 2:
Tools needed:
>> huawei multi tool by team mt
>> Hisuite installed for usb driver
>>> Copy "boot.img", "system.img", "recovery.img" these files to HUAWEI Multi-Tool by Team MT/Unbrick directory
>>> Reboot phone into fastboot mode (Turn Off phone, Vol- and Conncet USB Cable)
>>> Start the Huawei Multi-Tool and enter 6 for Unbrick menu and Press Enter
>>> Type N and press enter, Type 2 to continue
>>> The files are in /Unbrick and press Enter
>>> Then follow the instructions and your Huawei smartphone will be flashed with a your stock firmware!
## TOOLS And SOFTWARE ##
>> Huawei Multitool - An effective tool for various tweak and work.
>> Huawei Firmware finder - Find your phone firmware easily.
>> HiSuite
## Firmware Download ##
Site 1
## Stock Recovery ##
CAM-L21C636B150
CAM-L21C636B190
## Custom Recovery ##
TWRP 3.1.1
## Problems and Solution ##
Q1. I can't take TWRP Backup. /data mount error. Invalid Argument.
>> In TWRP>WIPE>Advance Wipe>Data>Change File Format> choose fat/f2fs etc.>Swipe to confirm
Then Again TWRP>WIPE>Advance Wipe>Data>Change File Format> choose ext4>Swipe to confirm.
Q2. How Do I know if Bootloader is locked or unlocked? I forgot.......
>> Boot phone into Fastboot mode and give this command: fastboot.exe oem get-bootinfo
Q3. Hey! I Flashed the wrong recovery image. I did not took backup of stock recovery. Now NO TWRP, NO EMUI Recovery. WHat to do??
>> It's nothing Relax! Take your Firmware (Only your Model, be careful) extract recovery.img using Huawei Update Extractor Tool. Then Flash it using Fastboot command. See above instruction for that. If you don't have exactly same firmware build version then take one or two increment updated firmware version. For example, When you flashed wrong recovery your phone firmware build was CAM-L21CXXXB140 then download exactly this file, for any reason if you don't find this then download CAM-L21CXXXB141/CAM-L21CXXXB150 etc. Extract recovery.img and flash it.
Click to expand...
Click to collapse
Custom Roms
Thank you very much for all these informations.
But in the stock Rom (Emui 4) there are a big issue. That it closes the application on screen closure even if these applications are protected.
So I am looking for any athor rom that works in this model. Or an update to emui 5 because it seems that they have solved this issue in this update.
Thanks in advance
I hooe someone would make a custom rom for this unit.
Try this Guide if you have LYO-L01
Remove ** : **petty.link/6Jh6**
xminirom said:
This Phone has several releases according to country it is important, why
Do not attempt to customized versions of other countries, otherwise there is the risk of an unsuccessful upgrade and may introduce unknown problems.
Hardware Version of the software is only available for device models hardware, if you use other device models of software upgrades consequences may not boot.
Huawei Y6II Country Region list:
GLOBAL = INTERNATIONAL = GENERAL
AFRICA : South Africa, Angola, Algeria, Congo, Botswana, Tunisia, Egypt, Zambia, Nigeria, Ghana, Jordan, Kenya, Morocco, Mauritius, Namibia, Tanzania, Uganda.
ASIA PASIFIC : Thailand, Turkey, Azerbaijan, China, Indonesia, Australia, Vietnam, Bangladesh, Cambodia, China, Hong Kong, Japan, Malaysia, Kazakhstan, Laos, Myanmar, Nepal, South Korea, New Zealand, Philippines, Singapore, Sri Lanka, Taiwan, China, Uzbekistan,
EUROPE : Russia, Austria, Hungary, Belarus, Belgium, Bulgaria, Czech, Croatia, Denmark, Estonia, Finland, France, Germany, Greece, Italy, Latvia, Lithuania, Poland, Macedonia, Netherland, United Kingdom UK, Norway, Serbia, Slovakia, Spain, Portugal, Romania, Switzerland, Sweden, Ukraine.
LATIN AMERICA : Mexico, Bolivia, Argentina, Chile, Colombia, Brazil, Venezuela, Dominican Republic, Costa Rica, Ecuador, Guatemala, Jamaica, Peru, Uruguay, Panama, Paraguay.
MIDDLE EAST : Pakistan, Kuwait, UAE (United Arab Emirates), Saudi Arabia, Arabic.
NORTH AMERICA : United States USA , Canada
.
Region Codes:
C00 = China | C02 = Europe Vodafone |C10 = Russia |C170 = Russia |C21 = Telefonica / O2 |C40 = Czech Republic Telefonica / O2 |C55 = Italia TIM |C86 = Spain Yoigo | C112 = Latin America | C121 = Türkei | C123 = Switzerland | C150 = Telekom | C183 = New Zealand | C185 = Middle East & Africa | C271 = Malaysia | C249 = Serbia Telekom | C324 = Taiwan | C358 = Tunisia | C432 = Europe | C209 = Asia (Pacific) | C470 = Asia Pacific | C636 = Asia Pacific | C637 = Spain | C675 = India | C151 = India | C900 = Global | C605 = Colombia
This is important if you want to know whether you are updating right file or not. Let's find out how? Suppose, in your about phone, you see something like this, CAM-L21C10B141 now what's that mean? well it's pretty simple. CAM-L21 is model no of your phone. C10 is the region here it's Russia (check the list of country and region code). Now, B141 is incremental no of update (and it keeps incrementing.....wow). Here is some build code:
CAM-L21C223B131 -
CAM-L21C432B140 - Europe
CAM-L21C185B140 - Middle EAST
so first figure out your phone model and carefully download exactly similar firmware for you phone.
Basic Key Stroke to enter Mode:
<<< Enter Recover Mode >>>
Volume Up + Power button
<<< Enter Bootloader/Fastboot Mode >>>
Turn Off phone, Vol- and Conncet USB Cable
Or
From adb write: adb reboot-bootloader
<<< Enter Erecovery Mode >>>
Power on, Press volume up for 3 second
Updating Your phone
Always remember, charge 70% and your important data backup first. Update may erase all your user data
#1# Normal Update: Download Huawei stock rom. read carefully and download exactly same model firmware.
1. Your phone must have a stock firmware and stock recovery to flash this Stock Firmware.
2. Prepare a microSD card.
3. Download and extract the software upgrade package / Stock Firmware you'll find update.app file
4. Create a directory name "dload" folder at microSD and Copy update.app file (/Microcard/dload/..)
5. in your phone go to Settings>phone upgrade>System Software Update
6. Click the Three dot icon, choose local Upgrade > ok
or
6 Open the dialer enter: *#*#2846579#*#* Then goto ProjectMenu >Software Upgrade >SDCard Upgrade >OK
#2# Workaround update: Some cases you won't find "Loacal Upgrade" option in menu/upgrade may stopped in that case do this
1. Your phone must have a stock firmware and stock recovery to flash this Stock Firmware.
2. Prepare a microSD card.
3. Download and extract the software upgrade package / Stock Firmware you'll find update.app file
4. Create a directory name "dload" folder at microSD and Copy update.app file (/Microcard/dload/..)
5. Turn off phone, Wait 5 seconds
6. Press Volume up, volume down and power key at the same time. Upgrade will start momenterily
#3# Advance update method: This process is not recommended and unofficial. It might not work properly.
First you have to Seperate boot.img, system.img, recovery.img, cache.img, cust.img etc. files from "update.app" file. How to do that? There is two TOOLs to do that.
>> Huawei Firmware Extractor tool
>>> download and extract in C:\ drive
>>> Download activePerl.exe and install it. Without ActivePerl it won't work.
>>> Now Place "update.app" file to Huawei Firmware Extractor tool folder
>>> Now run “split_update”. A "output" folder will create immediatly (take some time to extract)
>>> Run “HuaweiFinder” script [this script will rename output file properly such as boot.img, recovery.img etc.)
>>> you are done!
>> Huawei Update Extractor Tool - Fast and easy
>>> download and extract in C:\ drive
>>> Download .net framework 3.5/4.6 above and install it. Without .net framework it won't work.
>>> open HuaweiUpdateExtractor.exe, here profile is unknown, show "update.app" file
>>> It will show all files, now select and extract your desired place.
>>> Done!
## Flashing Method 1:
Tools needed:
>> ADB-Fasboot tool
>> Hisuite installed for usb driver
>>> Copy "boot.img", "system.img", "recovery.img" in fastboot folder
>>> Reboot your device into fastboot (Turn Off phone, Vol- and Conncet USB Cable)
>>> Go to ADB Fastboot folder
>>> Press SHIFT key choose Open command window here and write these command
>>> fastboot flash cust cust.img
>>> fastboot flash recovery recovery.img
>>> fastboot flash boot boot.img
>>> fastboot flash system system.img
## Method 2:
Tools needed:
>> huawei multi tool by team mt
>> Hisuite installed for usb driver
>>> Copy "boot.img", "system.img", "recovery.img" these files to HUAWEI Multi-Tool by Team MT/Unbrick directory
>>> Reboot phone into fastboot mode (Turn Off phone, Vol- and Conncet USB Cable)
>>> Start the Huawei Multi-Tool and enter 6 for Unbrick menu and Press Enter
>>> Type N and press enter, Type 2 to continue
>>> The files are in /Unbrick and press Enter
>>> Then follow the instructions and your Huawei smartphone will be flashed with a your stock firmware!
## TOOLS And SOFTWARE ##
>> Huawei Multitool - An effective tool for various tweak and work.
>> Huawei Firmware finder - Find your phone firmware easily.
>> HiSuite
## Firmware Download ##
Site 1
## Stock Recovery ##
CAM-L21C636B150
CAM-L21C636B190
## Custom Recovery ##
TWRP 3.1.1
## Problems and Solution ##
Click to expand...
Click to collapse
thank you so much for this post .you are awesome!!!!!
can you help me to find stock firmware for CAM-L21C185.......(MIDDLE EAST/SAUDI ARABIA).
I also need a stock recovery for it.my phone is bricked/boot looped .i don't want to void my warranty.
phone suddenly shut downed while ejecting the sim card without power off.
(currently I can't take this to service center.)
please help me
please give me tutorial for that if you can!
is anyone here know whats the code or name of cam l21 power management ic i searched every site but i couldnt find anything please help me asap