Database Info

[Q] V845 oroginal frimeware

Vodafone 845 aka huawei 8120
I can not install the original firmware.
What was done:
1) format the memory card
2) reset all settings
3) Download (V845 V100R001NZLC02B233SP01 (New Zealand Vodafone) from huaweidevice
4) Copy dload \ UPDATA.APP
5) Volume Control Upper Key + End Key + Power Key
And at first wrote unpacing, and then update fail
and in is the file sd_update
Code:
**** SD download log
****
Failure: AMSS ° x ± ѕZhҐEdK § ° b.
Failure: operation did not succeed.
Failure: operation did not succeed.
Failure: operation did not succeed.
Failure: operation did not succeed.
Failure: operation did not succeed.
dload_sd_ram_data_proc-> (retry> = DLOAD_RETRY) failed!
I don `t know what to do.
At this moment the phone superboot + amonrarecovery
and V845 custom rom by Leito
Excuse me for my english.

You can try from the phone, Settings->SD card &phone storage->Software upgrade. That's how I got back to the original firmware.

gkour said:
You can try from the phone, Settings->SD card &phone storage->Software upgrade. That's how I got back to the original firmware.
Click to expand...
Click to collapse
some error

nothing really matter:
here are a delete file
http://www.4shared.com/file/IEF601ow/dload.html
fist install it
second install what you want

Hello friend Whats "delete rom" means?
Is that rom a zero writer rom?
Thanks

It says Hungarian Dload, but use it, it includes all languages
http://www.4shared.com/rar/Le3k_DXU/2012-12-Untouched-Update2.html

CWM to flash UPDATE.APP

Hi,
The latest ROM for my Huawei P1 is in the UPDATE.APP format which I can't flash with CWM. The official software update option does not seem to work once the recovery is replaced....
Can an UPDATE.APP be converted to update.zip?

dazbo71 said:
Hi,
The latest ROM for my Huawei P1 is in the UPDATE.APP format which I can't flash with CWM. The official software update option does not seem to work once the recovery is replaced....
Can an UPDATE.APP be converted to update.zip?
Click to expand...
Click to collapse
extract .zip archive from download
copy the dload folder from archive to SD card /sdcard/dload/update.app
METHOD 1
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade to start upgrade
METHOD 2
power off device
press VOLUME UP+VOLUME DOWN then press the POWER key to enter upgrade mode (keep buttons pressed at least 5 s)
if this is not working do not lose time and send email to Huawei support they will take care about this problem for sure because
1.you are a customer for them
2.you are trying to flash an official update !

ruscan.calin said:
extract .zip archive from download
copy the dload folder from archive to SD card /sdcard/dload/update.app
METHOD 1
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade to start upgrade
METHOD 2
power off device
press VOLUME UP+VOLUME DOWN then press the POWER key to enter upgrade mode (keep buttons pressed at least 5 s)
Click to expand...
Click to collapse
Thank you for taking the time to reply, but as I said in my OP that the official update process (as you have described) does not work. I think because my phone is from another country and I am trying to put a UK UPDATE.APP on it. I have rooted and got CWM that will flash update.zip format, but the latest ROM is not available in ZIP format yet.

I realize this was a year ago, but if anyone else comes across this post I have a solution to flashing Huawei's UPDATE.APP files to my U9500 (Ascend D1) with CWM installed. I assume it is applicable to the P1 as well: http://forum.xda-developers.com/showpost.php?p=41353293&postcount=9

please help me
i have a huawei u8686 i try to install a cwm and now the screen show "image signature verify fail"

Can't update huawei ascend mate 7

Hello everyone,
So i wanna update my phone but when i click on install update this comes up:
Your system has been adjusted. Now when you run an online update, this can make the system unstable. Instead, you are advised to download the official update package and update via the SD card . Nevertheless continue with the online update ?
If i do it, it shows me update failed.
I'm at B137SPO3
I hope anyone can help me
Sorry for bad english
Cheerz, Yorick

You have root access i thing . You have to load your current system from adb then you have to update .

Just load the 137 recovery img. If your rooted its just like cad said so you needed the original recovery.
Sent from my HUAWEI MT7-L09 using Tapatalk

Since it happened to me as well:
(1) get the B137SP03 OTA package
(2) download the Huawei extractor
(3) use the Huawei extractor to get the file "recovery.img" from the OTA
(4) reboot with adb/flashboot and flash the recovery,img , then reboot
(5) try again the OTA install (either local update or ota, it does not matter): it may or not may not work
-if it does not work-
(6) make a full backup with the backup utility
(7) get the B137SP03 FULL package (it is 1.2 Gbytes, much bigger than the OTA)
(8) from the package get the update.app and put into the dload folder of your SD card
(9) perform a forced update (reboot by pressing vol up, vol down, power all together)
(10) restore the backup with your apps and data
(11) try the OTA install (either local update or OTA) which now should work
Anubis

Anubis1965 said:
Since it happened to me as well:
(1) get the B137SP03 OTA package
(2) download the Huawei extractor
(3) use the Huawei extractor to get the file "recovery.img" from the OTA
(4) reboot with adb/flashboot and flash the recovery,img , then reboot
(5) try again the OTA install (either local update or ota, it does not matter): it may or not may not work
-if it does not work-
(6) make a full backup with the backup utility
(7) get the B137SP03 FULL package (it is 1.2 Gbytes, much bigger than the OTA)
(8) from the package get the update.app and put into the dload folder of your SD card
(9) perform a forced update (reboot by pressing vol up, vol down, power all together)
(10) restore the backup with your apps and data
(11) try the OTA install (either local update or OTA) which now should work
Anubis
Click to expand...
Click to collapse
I can't find a B137SP03 OTA package on internet

YorickDrossaert said:
I can't find a B137SP03 OTA package on internet
Click to expand...
Click to collapse
Here:
http://www.huaweiblog.de/huawei/firmwareupdate-b137-fuer-mate-7-ota/
Anubis

Honor 8 bootloop issue!!!! (HELP!!!)

Folks,
I recently bought a Honor 8 and was trying to unlock the bootloder, install twrp and supersu by following the link below
https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-install-twrp-t3554789
As stated in the link above, I got to the steps to install supersu. However, on following step 12, it has formatted the data and now the phone is in a bootloop(stuck on the blue screen showing HONOR label)
I'm guessing my phone will not boot up since the OS has been erased. Could someone please help me restore this phone to back to the stock firmware and steps needed to do so. I am new to Honor phones, so not sure what I need to do and steps needed. Would appreciate any help if possible??
1. Boot into TWRP
2. Once there, when asked to keep system read only? - swipe to allow modifications
3. Tap Install
4. Tap Select Storage - Select your SD card
5. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
6. Swipe to confirm flash
7. Ignore the multiple errors: "Failed to mount '/data' (Invalid argument)
8. Go back to the main menu
9. Select Reboot to Recovery
10. When asked to keep system read only? - swiped to allow modifications (again)
11. Tap Wipe
12. Tap Format Data
13. Type YES then hit enter
14. It will format data using make_ext4fs..
15. When finished, tap Reboot System
16. Reboot back into TWRP
17. Swipe to allow modifications (You can check the box to never show this again)
18. Tap Install
19. Select storage
20. Select your SD card
21. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
22. Swipe to confirm flash
23. You should see NO ERRORS now when installing SuperSU
24. Wipe cache/dalvik
25. Swipe to wipe
26. Reboot system

Download the rollback and marshmallow firmware package from honors website. Rename the rollback package to "UPDATE.APP" and place it in a folder called "dload" in your micro SD card. Put the micro SD in your phone, and boot into the firmware update screen (volume up + volume down + power all at the same time). Once it's done, delete the old UPDATE.APP file from the dload folder, rename your marshmallow firmware package to "UPDATE.APP", place it in the dload folder on your micro SD card, place the micro SD in your phone, and again flash the firmware using volume up +volume down +power

Since you still have access to the SD Card via USB, you can just download your firmware, extract it and put the UPDATE.APP in a dload folder on a microSD card and press all 3 buttons when starting up the phone to start installing the OS again.

Appreciate the feedback. I tried going to the below website to pick up the rollback package and the firmware( Android 6.0)
http://www.hihonor.com/us/support/search-result/index.html?keywords=Honor%208%20Firmware
My question is that is it possible to just restore it back to android nougat(7.0) in the U.S or has the 7.0 not released for the U.S markets yet?
I found the following link below for the Android 7.0(Nougat) firmware for Honor 8 but not sure if this work on the phones bought in the U.S
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Appreciate your feedback on this..

Since the phone is in bootloop, I would have to use a different phone and it's SD card slot to download the firmware and then put it on the Honor 8. I'm guessing the rollback process would only apply if I wanted to go back to the Marshmellow firmware. My question though is would I be able to restore it back to Android Nougat(7.0) if possible.
I found the following link below for the Nougat(7.0) firmware. Not sure if this will work on the U.S phones. Is there a different process to restore it back to Nougat?
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14

You can try just getting the nougat firmware onto your micro SD, then pressing volume up + volume down + power to see if it works. Worse case scenario is that you'll get an error.
If you do get an error, your can try the rollback procedure. Once you get marshmallow running you can always just update back to nougat with OTA.
Oh yeah, you don't necessarily need another phone. Just get a micro SD card adapter and plug it into your computer, then transfer the files into the dload folder
---------- Post added at 07:37 PM ---------- Previous post was at 07:34 PM ----------
You can use the following link for marshmallow firmware. Again, you can always update to nougat later using OTA
https://forum.xda-developers.com/honor-8/development/models-stock-firmware-packages-honor-8-t3501942

thanks for the info..just another clarification. The nougat firmware I found online was a zip file that included 3 files(attached snapshot) . I noticed one of the files is the UPDATE.APP.
My question is on creating the new dload folder do I need to remove the other two files or just copy all of 3 files in the dload folder before I try to restore the phone back.. Sorry if it's a straight-forward question, but I just want to make sure I'm doing this right.
Much thanks...

Just the UPDATE.APP
What are the other 2 files? Just curious

there is a folder called : META-INF which has some files in it and also a file called: full_mainpkg.tag which is only a 1KB file so maybe that's inconsequential.

Did you try out the procedure yet? The META-INF folder should not be necessary. You can always try the method with and without the folder included if you really need to.

I did...it did do the update following the steps you mentioned and it seems everything went fine as far as the update is concerned. I didn't get any errors, but once the phone rebooted it is still stuck on the blue screen with the Honor logo on it

Have you tried the rollback procedure as well?
---------- Post added at 04:16 AM ---------- Previous post was at 04:08 AM ----------
If neither procedure worked, you can try another procedure which involves extracting SYSTEM.IMG, BOOT.IMG, RECOVERY.IMG, and CUST.IMG from the UPDATE.APP file, then flashing all of them through fastboot, and finally preforming the rollback procedure again.

was finally able to get the phone to reboot and load the firmware. It does seem that there is some issue with the keyboard now as it's only showing OK google as the keyboard so I don't have a keyboard anymore. Not sure how to go around this. Also the phone seems a little laggy and unresponsive at times which wasn't happening earlier. I'm thinking of trying the rollback method to see if that helps or improves the performance of the phone. Let me know of you have any suggestions. Thanks again for your help...

That's a known issue with the keyboard. For some reason it does not function correctly after a factory reset. The rollback should fix everything. Once you are back on marshmallow, just update back to nougat (if you want to) through OTA system update.
Edit: it might actually be easier to just perform a factory reset on the nougat firmware. I'm assuming your data was wiped through the procedure anyway, right?

I can do the rollback but I just realized that I have the 64GB version which is the FRD-L14
http://www.phonemore.com/huawei-honor-8/models/629
I'm not sure if there is a FRD-L14(64GB) variant of the MM firmware available anywhere. If so, I'm not aware of the link of the site to find it. Secondly, if I do install the FRD-L04(32GB) variant of the MM firmware would that create problems for the phone in upgrading and later trying to root and install custom ROM etc.
Much Thanks

The nougat firmware your flashed earlier, was it the L14 firmware? I would not flash a L04 firmware on a L14. Instead, you can probably flash the L14 nougat firmware (unless you already did) and then perform a factory reset
EDIT: Refer to this thread:
https://forum.xda-developers.com/honor-8/how-to/frd-l14-users-how-to-restore-downgrade-t3537433
The OP uploaded the correct L14 firmware files. Remember to first flash the rollback package, then the firmware.

the firmware I flashed earlier was the L14 firmware. I went to the link you mentioned above in your post. It's a little confusing as far as the exact steps that need to be followed as people seem to be adding/modifying steps. Would help if I could get a clear step process on how/what to follow.
Also, is it okay to flash the rollback package and then flash the nougat firmware package for L14 if I am currently on nougat(not fully functioning as mentioned in the posts above).
This link below from your reference thread has a few L14 firmware's. I had earlier picked up the first one from the list. Not sure if that's the correct one to flash..
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Thanks again...

The rollback package is only used if you're downgrading from nougat to marshmallow. Otherwise, you don't need it. Since you were having some issues after flashing the nougat firmware, I would recommend that you rollback, and then update to nougat afterwards. Here's a step by step:
1. Get an micro SD card. Create a folder on it called "dload"
2. Download the F14 rollback package from the following link:
http://download-c.huawei.com/download/downloadCenter?downloadId=92098&version=360320&siteCode=us-h
Extract the UPDATE.APP file, and place it into your dload folder. Pace the micro sd into your phone
3. With the phone shut off, press volume up + volume down + power to flash the UPDATE.APP. Once it's done, shut down your phone and remove the sd card
4. Download the F14 Marshmallow firmware from the following link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1201/g88/v66294/f1/full/update.zip
Extract the UPDATE.APP, and replace the old UPDATE.APP in the dload folder with the new one you just downloaded.
5. Place the micro sd into your phone. Repeat the button combination to flash it. Once it's done, shut down your phone.
6. Press volume up + power to boot into system recovery. Wipe the phone's data from this screen.
7. Boot into the phone. Go to settings -> About
Check to see if the model# etc is correct. If it is not, complete step 8. Otherwise go to step 9:
8. Download the following file:
http://update.hicloud.com:8180/TDS/...94/f1/full/hw/usa/update_data_full_hw_usa.zip
Extract the UPDATE.APP, place it in the dload folder, and flash it.
9. Boot into the phone. If you want to update to nougat, do the following:
Go to your dialer, and type *#*#2432546#*#*
This will force your phone to check for updates.
Then go to Settings -> Updater to update to nougat

I did follow your steps, but my keyboard has now vanished when the set up screen appears. It only shows google voice and I'm having trouble setting up my phone. Has anyone had the same problem. What can I do to get my keyboard back?
Note: my phone is unrooted. Not sure if that makes a difference

Honor 8 update

Hello guys. I have a Honor 8 (Al-C900B120 version) how run Android 6.0 with EMUI 4.1. I want to update it to Android 7 and EMUI 5 or more but i don.t find the pack with update because my phone don.t want to riceve it. Can somebaby help me to solve this think and let here a link .
Tnk !

Hello! Do you already tried to install and use HiSuite software on your computer to get an update?

Micdu70 said:
Hello! Do you already tried to install and use HiSuite software on your computer to get an update?
Click to expand...
Click to collapse
Yes but nothing

Iosifcosmin said:
Yes but nothing
Click to expand...
Click to collapse
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
if i do this , in the chines version the google play will be work ?

Iosifcosmin said:
if i do this , in the chines version the google play will be work ?
Click to expand...
Click to collapse
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).

Micdu70 said:
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).
Click to expand...
Click to collapse
My phone is Al-10

Iosifcosmin said:
My phone is Al-10
Click to expand...
Click to collapse
EDIT: Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info". If you see "Vendor: all" and "Country: cn" = OK you can follow:
EDIT 2: If you see "allwyf" in vendor info, tell me and I will give you the good zip files!
Try to flash FRD-AL10C00B396 - "all-cn" vendor - January 2018 security patches included, via dload method. But there is 3 files to flash (in order!):
0) Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop.
/!\ It's better to use a SD Card, don't know if it works if you send files into Internal Storage! /!\
First flash: update.zip
1) Unzip archive, create "dload" folder inside root of SD Card memory if not present -or- delete "dload" content if exists, then transfer extracted file named "UPDATE.APP" inside "dload" directory.
2) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3) First Boot can take some minutes, wait patiently...
Second flash: update_full_FRD-AL10_all_cn.zip
4) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
5) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
6) And... Boot again... ^^
Third flash: update_data_full_public.zip
7) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
8) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
9) All files were flashed! OTA update will not give you updates because it's the latest OTA update (currently)...
10) If any issue, Factory Reset can help.

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
i follow your steps but when i turn on my phone (press up and down key + power key) the update stop at 5% and it stuck.... and after that it turn . What can i do to work the update?

What do you see/have when you do this:
Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info".
?