Hey I have a strange problem: I have created a little script that turns on an adhoc network on my Linux notebook, this way I can share my wired internet with my phone.
Only problem: if I connect to the newly created network, it gets a 169. IP, then it looses it's connection and then it crashes.
IF it works (which is very rare, but sometimes it does) it works perfectly (then I first get a 169. ip, then loose connection and then I get a good IP from my DHCP server) DNS and everything works like a charm.
So my question is: why does it crash and what can I do about it?
If I connect to the same network with a Touch Dual I have no problems at all
If you need more info, please ask!
Hi guys,
I've recently become the proud owner of a vodafone touch pro. However when connecting to wifi, opera etc will not find any webpages. Now i know my wifi is working and the phone connects fine and picks up the DHCP ip address.
What could I be doing wrong? I've noticed data connections is disabled but I believe this is just for GPRS etc? Either way how can I confirm my wifi connection is being used?
Many thanks
EDIT - NM it was because it was not set to work
Hi Scribe,
I had the same problem as yours. No solution so far. Had no problem with GPRS.
I have mine working good on either wifi or GPRS.
Probably it's wifi problem? Have you tried on another wifi connection?
what was not set to work?
I have the same issue, connects to wifi but no internet. laptop connects and browses fine, but touch pro (and also diamond) don't
Make sure when you set your wifi connection up you say that it is used to connect to work not the internet, also make sure your adapter settings say this.
The problem is that the phone will always default to GPRS/3G for the internet but if it senses a local work network it will use that first.
Stupid I know!
I have the same prob, I changed some settings and it works. Try change Authentication to Shared instead of WAP-PSK, Data Encryption to WEP instead of TKIP. After you have internet connection, you can change to previous wifi settings with same network key.
Mine has gone again! I swear it's because 'Connects to the internet' wont save in the proxy settings - nope not that and still wont work, I've also tried by disabling all security
My TouchPro can connect normally to unsecured wifi networks, but with WPA encrypted ones, it can only connect for the first time, after that it can not.
At home I have a wireless router/ADSL modem (Zoom X6) that is connected to my PC by cable, all my phones and laptops connect to internet via wifi. While other phones (1G iPhone) and laptops always connect successfully, the TP only connected once and then cannot or unable connect to the WPA security-enabled wireless network (although it's able to scan and detect the availability of the Wifi network). I tried to reset the router settings, even update router firmware, but no luck, it's still unable connect. I also tried with my office secured wifi network and I had the same problem.
Yesterday, I had to hardreset my TP and tried to connect once again, but problem was repeated, connected only once and after that, unable. Note that my previous PPC (TMobile Ameo WM5) didn't have any problem with the same wifi router and the same wifi settings (as follow).
My TP wifi settings:
Network Name: MyNetwork
Connects To: The Internet
Uncheck "This is a hidden network"
Next step:
Authentification: WPA-PSK
Data Encryption: TKIP
Greyed Out: The key is automatically provided
Network Key:************** (my pass)
Greyed Out: Key Index: 1
Next,
Checked "Use IEEE 802.1x network access control" but greyed (I can't change this)
Anybody know the solution for this issue?
Thanks and very appreciated for any help.
i experienced similar problems with my old p4350 but not yet with the TP...
no solution, sorry. but im quite unhappy that this issue still exists...
Any suggestion, pls.
yeah.. quite sucky.. I though the WiFi 'broke'.. but i was able to connect to a WEP site.. I think its something to do with WPA.
I never had this problem with my Diamond. The firmware on Diamond isso much more stable compared to Touch Pro..
I set everything to WEP and my key is open instead of shared, and now it works fine.
I had issues at my dad's, who has no encryption, and also there, when I set the key to open io shared, I got connection. (even though there is no key
anyway, it looks like that is the bug (at least in my device)
I have exactly same settings and same problem... but I want to use this encrypted connection since in future I will have to connect also in other places where I need it for sure.
Any help here?
I have similar promblem with my Hermes before.
My wireless router is running "Turbo-G" mode, my Hermes can't connect it with Turbo-G mode On.
After I change the wirless mode from Turbo-G to "g/b", my Hermes can connect it without any problem.
I tryed that and does not work...
strange is that is was working in the past and on router I did no changes but on TP I installed just some apps which should not affect this...
Only what could affect is Advanced config which I installed...
So where else can be problem?
How can I troubleshoot this?
Signal kvality is good but still keeps dropping and does not obtain IP from router.
mine works fine...not that that helps you in any way
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
hung_ng said:
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
Click to expand...
Click to collapse
You are merely restricting people from connecting to your router.. without encryption, you are sending unsecure packets all over..
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
I tried the PT using unsecured routers, WEP and WPA and all of them worked fine with stable connectivity.
The routers I have tried (without any problems) so far are:
1. Linksys WRT-54G running Tomato firmware
2. Linksys WRT-54G running DD-WRT firmware
3. D-Link DIR-655 running latest firmware
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues...
I am not using a custom ROM.
I hope this helps in some miniscule way.
Good luck.
Minus-1 said:
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
....
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues....
Click to expand...
Click to collapse
I was about to say the same thing...
Not having any issues with my girlfriends WPA secured router. It's on WPA2-PSK and AES encryption. Enter key first time (case sensitive!!), and of you go... Connecting without trouble ever since
hmm..Funny mine still can't connect to my home WPA2, AES or TKIP.. I'm on the Buffalo Tomato firmware..
WIFI not connecting
This solution worked for me!! Excellent. This was a right pain!
thedino said:
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
Click to expand...
Click to collapse
I've got the sollution, everybody on this forum probably has advance config installed, the program sets some default value's of it's own, set the WPA authentication under network in the advance config program to disabled and it will work again. Anyways, that worked for me
I've removed WiFi settings and then I edited settings again. It works now
Raphael Wifi problems
I bought this Fuze to replace my trusty Dash since I broke the antenna on my Dash. I'm running NRG Magic, but have tried other NATF and other ROMs as well, I cannot get this phone to connect to my wifi network I'm using WPA2-PSK but have disabled security for testing. My Dash and my laptop connect immediately with no problems. If I cannot get wifi going on this Fuze I'm afraid I'll have to put it on Ebay and try the Iphone, which people seem to love.
The Fuze did connect once, and it was WPA2-PSK at the time, I don't remember what ROM I was using at the time probably an NRG flavor, but Ihave had _no_ luck since.
Should I flash to 'official' ROM? Honestly I'm getting tired of playing with this thing I don't have the time.
Any help would be appreciated.
Thanks,
Marc
I may have found something
Check your time zone/daylight savings settings on your router. Phone and router time must be in sync.
hi
i am pretty new to andriod and i was trying to connect to wifi at my home and i have a NETGEAR WNDR4000-100NAR N750 router and i am having trouble connecting to internet .
when i select a ssid and give password it takes forever to come to connected state , once it gets connected [like after 2mins or so ] i have really poor internet connectivity .
my router has wpa-2 ,everything works fine other than this phone .
i checked the phone at my office wifi its working great .
any suggestions or ideas ?
PrudV
I am having the same issues.
I just purchased the moto G and it will not work with WPA2-AES. If I removed the encryption it works great.
I have another wireless router in the house using WPA2-AES and that works just fine.
I have a sitecom using with wpa2Aes and no problem here
Hi everybody!
I'm using the latest build of CM11S (KTU84P), When i'm connected to my home network (using a Dlink 6740H1 router) the connection to the wireless network will stop after a few minutes.
The wireless icon will become orange and there will be no data transfer what so ever. When I'm connected to other wireless networks the phone works fine and does not disconnects.
The "Keep Wi-Fi on during sleep" option is checked and the "Avoid poor connections" is not checked, further more I've tried flashing franko kernel but it didn't change anything.
Other phones in the house (HTC one X) does not seem to suffer from the same problem, did anyone ran into this issue before?
Thank a lot!
EyalRDT said:
Hi everybody!
I'm using the latest build of CM11S (KTU84P), When i'm connected to my home network (using a Dlink 6740H1 router) the connection to the wireless network will stop after a few minutes.
The wireless icon will become orange and there will be no data transfer what so ever. When I'm connected to other wireless networks the phone works fine and does not disconnects.
The "Keep Wi-Fi on during sleep" option is checked and the "Avoid poor connections" is not checked, further more I've tried flashing franko kernel but it didn't change anything.
Other phones in the house (HTC one X) does not seem to suffer from the same problem, did anyone ran into this issue before?
Thank a lot!
Click to expand...
Click to collapse
*cough*
i have a similar problem with the latest rom.. KTU84Q (38R).. my wifi wont connect to my home AP.. never had this issue pre 38R.
Did you find a solution to this problem?
I have the same problem..
I am also having this problem.
I'm having the same issue with our router at work. Have you tried setting up a static IP for your home network?
problem with wifi: i connect to a network (password) and everything is ok until i go out of coverage. when i go back in area, the phone scans/finds the saved network but does not connect auto, i have to turn off/on wifi and then it connects.
on all networks, dosen't matter the router model or type of network (password or free, static/dinamic IP)
Try deleting all the saved Ap and re-add them. Seems it worked for me, now it connects to Wi-Fi. I had many saved from trips (hotels, pubs Wi-Fi with password and many free)
Sent from my A0001 using Tapatalk
try change channel wifi to another