Database Info

[Q] Wifi Connection Problems - Vegan-Tab

Need a little help. My G-tab is running current VEGAn-TAB rom. I am having problems getting the wifi to actually connect. My icon shows a good signal, and inside the wireless settings I am showing connected to my wireless network. I also went to advance settings and made sure wifi never sleeps. All apps that need internet connection (market, browser, etc.) show no data connection.
Used yesterday with no problems. My laptop is running on same network and working fine.
Any ideas?

have you restarted? Sometimes happens to me too but it's nothing a simple restart can't fix.

Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.

TexasZac said:
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
Click to expand...
Click to collapse
Could be competition on the 2.4 GHz frequencies. Some wireless phones and even microwave ovens can trash a wifi connection.

Moved to general

Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.

I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?

LittleBirds said:
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
Click to expand...
Click to collapse
No problems with home WEP, office WPA2-PSK and several wide open public ones. I just wish the damn thing would auto-connect to the ones I have been to before.

outofoffice said:
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
Click to expand...
Click to collapse
My only guess is, if its a 5Ghz N Router you should check to see if it allows
2.4Ghz signals and not just 5Ghz. The GTAB doesn't seem to support connections at 5Ghz.

I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.

I don't have a lot to add to help you troubleshoot, but I can say that I am running VEGAn Gingerbread RC1 with pershoot's latest kernel. I am able to connect at home on a WAP2-PSK (Linksys Linux based G/N) at home, WAP2-PSK at the cabin (Linksys's cheapest G/N), and at work on a 802.1 EAP network (Cisco).
I has some unexplained issue mounting the internal storage on a computer. After a little head scratching, I started to wonder if it had something to do with the custom kernel I was running. I flashed Pershoot's latest kernel and my problems went away.
I mention all that to suggest that you might try flashing a different kernel and see if you get different results.

I have an issue with vegan where when i reboot the device (or turn off and turn on) wifi is off even if left on when turning off, i have to manually turn on wifi after every boot.
Sent from my DROIDX using XDA Premium App

fajordan said:
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
Click to expand...
Click to collapse
Have you checked to see if you're using MAC address filtering, and if so, that your gTab's MAC address has been added to the whitelist on the router? I get the feeling that that may be the issue. You have the WEP key on your device, but your router's still blocking it. I'm running the same ROM you are, and have had absolutely no troubles connecting to my work network with 802.1 PEAP, WPA/WPA2-TKIP and AES at home, and multiple makes/models of access points/routers.
Hmmm. Just reread your original. Now I'm wondering if you have enough DHCP leases available on your router. If you're out, you'll have to wait until a lease expires or add some more to your scope of addresses.
Hope some of that helped in some way...

[Q] Wifi not working with LG P500

Hey guys, I have an LG p500 and I use custom roms. Currently using CM 6.5.7 (2.3.5) and randomly I got this. It says my wireless is disabled. I am unable to include a photo as I am new to the forums. But basically it shows my wireless name and "disabled, secured by blah blah". I've tried forgetting the network, still same problem. Reflashed and wiped cache and dalvik.
I am unable to connect to my wireless, it just says disabled. This randomly happened, and wifi was working fine for 6 months, It worked fine on 6.5.7 but just randomly said that. I can connect all other wireless devices to the router, so whats the problem

1nf3rn0x said:
I've tried forgetting the network, still same problem.
Click to expand...
Click to collapse
'Forget' all the networks until you no longer have 'Not in range' networks. Maybe reboot your phone and try connecting again. It should work.

Nope, didn't do it.
Still says the same thing.

I experienced a similar problem with my home network (with the same rom) and solved by introducing manually the IP adress, gateway, netmask & the DNS. (got them easily by looking at the properties of my wireless network from a laptop and choosing an IP address within the range supported by my router). Now my phone is always connected using this configuration, but it only works optimally with the network for which settings are valid.
Might be a ROM bug. someone alerted to mik about this bug to fix it?

I have the same problem too. My WiFi randomly stopped working and when I turn the WiFi on it says "connecting" and then "disconnected". When I try to scan for more it doesn't do anything. I am also using the Cyanogen Mod as well.

The problem is probably that usb debugging is turned on. Try turning it off.

explain me pls
xsam123 said:
I experienced a similar problem with my home network (with the same rom) and solved by introducing manually the IP adress, gateway, netmask & the DNS. (got them easily by looking at the properties of my wireless network from a laptop and choosing an IP address within the range supported by my router). Now my phone is always connected using this configuration, but it only works optimally with the network for which settings are valid.
Might be a ROM bug. someone alerted to mik about this bug to fix it?
Click to expand...
Click to collapse
(got them easily by looking at the properties of my wireless network from a laptop and choosing an IP address within the range supported by my router) how i should do this can explain me i have win 7

[Q] WiFi disconnects while showing it is connected only on Android

Hi,
I have multiple devices at home using the WiFi fine (iPad, Laptops...)
But with two android devices (Nexus 5 and Galaxy S 4, both on unmodified) I have the same problem.
It connects to the network, and works just fine, but after some time, there isn't any internet connection, although it shows as if it's still connected.
By disabling and enabling Wifi I get internet connection again, but it's really annoying.
Here's my setup:
Edimax router as AP
2.4 GHz (B+G+N)
Visible ESSID
Channel number 6
Encryption: WPA 2 (AES) pre-shared key (passphrase)
No MAC Filtering
EDIT: This router is a switch with wireless, it is connected to a diffrent router that is connected to the internet.
What can I do? Should I modify any of my WiFi settings?
Thanks!

did you try to disable energy saver?

makissta said:
did you try to disable energy saver?
Click to expand...
Click to collapse
If asking you're whether I had disabled the WiFi optimization in the WiFi settings, yes I have...

I have just only remembered that this router is actually a switch with wireless. The internet is connected to the other router, which is connected to the router i'm asking about (EDIMAX) which acts as a switch.

[Q] Connected to WiFi and no Internet access, how to fix?

Dear XDA members.
I purchased my D820 Nexus 5 a couple of days ago, connected to my home router to set things up but then I noticed something, the device is connected to the router in every single room in the house with at least a fair-strength connection but I actually don't have Internet access unless I'm about 6-10 ft away from the router which is a bother.
Things I tried:
-Restarted router
-Connected to router using other devices
-Edited router settings flipping between 802.11 b/g/n bands
-Changed security type and encryption
-Used a static IP connection instead of a DHCP
-Installed two different roms to test the connection (CM11, Mahdi)
-Installed Wifi analyzer,apk to check surrounding traffic (to avoid wireless interference) and then changed router channel to a suitable one.
I have searched loads of websites and haven't found any working solutions, I'm so desperate for help.
Sorry for writing a long thread and thanks in advance.
Frogi.

In your phone's advanced WiFi settings there is the option to choose between 2.4Ghz or 5Ghz try those. If that doesn't work trying flipping the mobile data switch off and see if that helps.

bblzd said:
In your phone's advanced WiFi settings there is the option to choose between 2.4Ghz or 5Ghz try those. If that doesn't work trying flipping the mobile data switch off and see if that helps.
Click to expand...
Click to collapse
I have tried that, no luck

What happens if you remove any security type and encription?

[Q] Help! Very bad wifi signal at 2,4Ghz?

Hello all,
I just bought a Oneplus One.
But when I tried to connect to my home Wifi (which is 2,4Ghz, and no options to use 5Ghz) it didn' t saw my router.
Now I downloaded Wifi Analyser, This is showing me that I only have a connection with my router if my phone is only a few centimeter/inches away from the router.
This problem is not in my router because i have this with all the wifi connections that are using 2.4Ghz.
All the wifi connections that use 5ghz are working fine.
I've already changed the channels on my router, which didn't make any difference.
I also did a factory reset, still nothing.
I also changed the settings of my phone to only use 2,4Ghz wifi.
I set my wifi performance to his max but still only connection with my router if I hold my phone a few centimeter/inches away from it.
Does anyone have any ideas that I can try? Its really annoying that I can use wifi
Thanks for your time!