Related
Hi all,
i have a camera problem after installing Android on my Polaris 100.When i turn on my camera it gives me just a green screen and after a while the OS gives me the message that the process camera.android.com crashed unexpectedly.
I follow the installation to nand steps, that are posted in this forum by l1q1d ,i use the latest kernel 2.6.32 and the latest froyo release "Incubus26Jc_'s_Super_FroYo_RLS16",i create the nbh file using the latest 1.04 atools,and install the android using install.sh script.I tried different radio rom versions,i tried my original radio rom 1.58.XX.XX ,also 1.59.46.12 and 1.65.38.14 and 1.64.XX.XX ,i tried also My Warm Donut Android release but the camera won't work.On my WM6 and on WM6.5 cooked rom the camera works perfectly ,so my conclusion is that this is not a hardware problem.What should i do,any ideas.
I like very much the Droid OS and i want to use it but this problem is very annoying,i search the forum for users with similar problem and i found some threads but they were useless cause the posts does not contain any particular resolutions for this problem.
I will appreciate any help that i can get.
10x in advance everybody
godjak
Well,
i finished with my Android experiments now i'll post the results.First i have to say that i didn't succeed to have a working camera on my Android NAND installation .Like l1q1d advace me for all my installations i used kernel 2.6.25,i use 3 version of radio ROM 1.58 (21.23/25.14/26.20) i installed androidupdate from l1q1d sourceforge site,and i use nbh file from his "Kaiser thread".
Now the results by Android Releases:
1.Latest Froyo Release:
Installation failed!
System message during installation:Install module failed.Could not install for this kernel.
2.Latest Froyo Unodex-en (from sourceforge)
Installation succeeded.
1.58.21.23-Camera gives green screen
1.58.25.14-Camera flickering in all kind of colors and shuts down after a while.
1.58.26.20-Camera flickering in all kind of colors and shuts down after a while.
3.Latest Gingerbread (26.12 from sourceforge)
Installation failed!
System message:No space left on device cannot extract data.
4.Barebones deodex
Installation failed!
System message during installation:Install module failed.Could not install for this kernel.
5.Barebones odex
Installation failed!
System message during installation:Install module failed.Could not install for this kernel.
Well that's all folks,if someone has any ideas how to have a working camera on NAND let share his experience with us
The 2.6.32 kernel hasn't camera support for polaris now
l1q1d said:
The 2.6.32 kernel hasn't camera support for polaris now
Click to expand...
Click to collapse
Sorry to mention that but i tried also with kernel 2.6.25 with same result,which kernel exactly has a camera support?And could you be more accurate which radio version the Incubus RLS16 is working WITH camera support,is there any chance to have a working android installation with all my communications and features working,i didn't ask much,just want to use my phone for calls,wifi,BT ,GPS and camera thats all.
Regards
godjak
i suggest latest 2.6.25 kernel for camera, choose one release from kaiser thread and remember to install the modules from the modules/androidupdate.tgz in sourceforge.
you asked a fully working system (not too much....)
l1q1d said:
i suggest latest 2.6.25 kernel for camera, choose one release from kaiser thread and remember to install the modules from the modules/androidupdate.tgz in sourceforge.
you asked a fully working system (not too much....)
Click to expand...
Click to collapse
What did you mean by "Kaiser thread" can you post me a link to this thread?
Do you mean androidupdate.tgz on the atools sourceforge page???
The camera is a very basic feature of every modern phone i don't think i ask for too much,or what can i do with phone that i can't make phone calls.I'm ok with the bugs on your currently developing OS but this is something that i need to have,just to enjoy my PDA and the Droid OS,sorry
Camera isn't a very basic feature for a phone without native android so, there is work to do, if you want to help you are welcome
The update is the one from sourceforge (or look in kaiser thread for the link)
l1q1d said:
Camera isn't a very basic feature for a phone without native android so, there is work to do, if you want to help you are welcome
The update is the one from sourceforge (or look in kaiser thread for the link)
Click to expand...
Click to collapse
Obviously you won't tell me what is this "kaiser thread" ,do you mean that i have to use kaiser nbh file ,or i'm just guessing your posted hints,if you don't want to help just don't post any more replies i get your insinuating remark.I see that you are the smartest guy in this forum because from the threads i read i'm not the only one getting clever answers and no specific solutions from you for the problems,but this is your right of course.
10x again
godjak
godjak said:
Obviously you won't tell me what is this "kaiser thread" ,do you mean that i have to use kaiser nbh file ,or i'm just guessing your posted hints,if you don't want to help just don't post any more replies i get your insinuating remark.I see that you are the smartest guy in this forum because from the threads i read i'm not the only one getting clever answers and no specific solutions from you for the problems,but this is your right of course.
10x again
godjak
Click to expand...
Click to collapse
OK i got it,it takes time for the "stupid windows users",my last question is what radio rom version should i use ,or i have to try all of them to get it working
10x
try with one of the 1.58.xx.xx from here
http://forum.xda-developers.com/showthread.php?t=379599
l1q1d said:
try with one of the 1.58.xx.xx from here
http://forum.xda-developers.com/showthread.php?t=379599
Click to expand...
Click to collapse
10q i'll try it and i'll post the results from my experiments next week
See ya
godjak
Hi l1q1d,
My camera works very fine with your latest kernel. I use :
- kernel with Haret (zimage 11-29-10) and all with atools
- last build froyo of Thoughtlesskyle
Cheers
l1q1d said:
try with one of the 1.58.xx.xx from here
http://forum.xda-developers.com/showthread.php?t=379599
Click to expand...
Click to collapse
whato do you mean as latest? 2.6.25 or 2.6.32?
manu33xtro said:
Hi l1q1d,
My camera works very fine with your latest kernel. I use :
- kernel with Haret (zimage 11-29-10) and all with atools
- last build froyo of Thoughtlesskyle
Cheers
Click to expand...
Click to collapse
You are using an SD installation of the Droid or what?I want to substitute my WiMo with Droid (nand installation) not using it simultaneously
camera
Greetings!
At me camera Polaris100, android 2.2 has earned!
The system is established on SDcard. Details later.
Excuse for my English
Wow that was some bad english lol. Sounds like your excited about android on your polaris though which is good!
camera works
google translator has done his dirty work! But I will continue to use it. (Better than the very bad way.)
I wanted to say that after extensive experiments android all still earned 2.2 on my touch cruise (polaris 100) including camera and wi-fi.
Everything works! but not yet stable.
I shall list what is not working:
-The camera takes pictures only when switching to video mode error.
-The front camera is not working.
-FM radio does not work.
else works 100%!
Thanks to everyone who has been developing an android 2.2 for polaris 100!
colombo_nik said:
google translator has done his dirty work! But I will continue to use it. (Better than the very bad way.)
I wanted to say that after extensive experiments android all still earned 2.2 on my touch cruise (polaris 100) including camera and wi-fi.
Everything works! but not yet stable.
I shall list what is not working:
-The camera takes pictures only when switching to video mode error.
-The front camera is not working.
-FM radio does not work.
else works 100%!
Thanks to everyone who has been developing an android 2.2 for polaris 100!
Click to expand...
Click to collapse
Those are the problems that are common to any polaris kernel and build in existance right now.
HI, i still can´t make my camera work, i have a polaris 100, please hepl a nooby
use 2.6.25 kernel in order to make camera working.
I use 2.6.32 and camera works fine. With radio 1.64.08.21 calls and camera didn't work, and i dwonload radio 1.59.46.12 and all works fine.
Hi,
On russian forum 4PDA was released 3 ROM's based on android 4.2.2
FORUM link : http://4pda.ru/forum/index.php?showtopic=435551
by Serge00700: http://4pda.ru/pages/go/?u=http://yadi.sk/d/L0vPrabO9mTmV
by Akkot: http://4pda.ru/pages/go/?u=https://...0B9o-XUuuXVDjWVROak82R3pfZ2s/edit?usp=sharing
MIUI 3.9.13 by serge : http://4pda.ru/pages/go/?u=https://...0B9o-XUuuXVDjWVROak82R3pfZ2s/edit?usp=sharing
And for me best version by Serge00700 modded by Mr.BlackSK on www.androidforum.cz : https://mega.co.nz/#!GJMFCCTa!bhueqAMGlnTmkYgW4A_tI2N_dd0KCAwiqQ5TnLAmPgA
Best Regards
Hi,
Im running serg00700 4.2.2 port. I post some screenshots here.
Everything works, I like it
I will try this Mr.BlackSK version ASAP.
Today i tested first rom, by Serge00700:.. IMO this rom is buggy. No 3G sim card switch option (without opening phone ), gprs crash, no polish language etc... CPU voltage is incorect, and CPU is too hot.
I tesded the third one for 2days. It works fine and really smooth. First i dont have mobile data, but it was a simple mistake... just a wrong APN setting, so i set it manually, and the promlem solved!
Hello, On firmware from serg00700, flashlight turned on by pressing the volume keys + and - when turned off and the screen is locked
mimi.vx said:
Hi,
On russian forum 4PDA was released 3 ROM's based on android 4.2.2
FORUM link : http://4pda.ru/forum/index.php?showtopic=435551
by Serge00700: http://4pda.ru/pages/go/?u=http://yadi.sk/d/L0vPrabO9mTmV
by Akkot: http://4pda.ru/pages/go/?u=https://...0B9o-XUuuXVDjWVROak82R3pfZ2s/edit?usp=sharing
MIUI 3.9.13 by serge : http://4pda.ru/pages/go/?u=https://...0B9o-XUuuXVDjWVROak82R3pfZ2s/edit?usp=sharing
And for me best version by Serge00700 modded by Mr.BlackSK on www.androidforum.cz : https://mega.co.nz/#!GJMFCCTa!bhueqAMGlnTmkYgW4A_tI2N_dd0KCAwiqQ5TnLAmPgA
Best Regards
Click to expand...
Click to collapse
Same link from MIUI and akkot version
New wersion of my rom for prestigio is ready, link:
http://forum.xda-developers.com/showthread.php?t=2440631
my problems...
Hi
Yesterday i've installed this one....and it is pretty good....i just wanter android 4.2.2..and here it is..BUT:
Sound is somehow ..low....not loud enough, i think....
and no way i could manage GPS to work
anyone has such a problem with this rom?
any suggestions?
mimi.vx?
thanks in adwance
mimi.vx said:
Hi,
And for me best version by Serge00700 modded by Mr.BlackSK
Best Regards
Click to expand...
Click to collapse
wwwaske said:
Hi
Yesterday i've installed this one....and it is pretty good....i just wanter android 4.2.2..and here it is..BUT:
Sound is somehow ..low....not loud enough, i think....
and no way i could manage GPS to work
anyone has such a problem with this rom?
any suggestions?
mimi.vx?
thanks in adwance
Click to expand...
Click to collapse
no , any of these problems ...
I use https://mega.co.nz/#!kspD3ThR!Q0sTdw4_w2UEBfgiarEaOCWAU8RvMs3fU8qXwWF16BY
GPS i have fixed under 10sec , with cold stard GPS about 30 sec
sound is very loud + i use with this rom Mi-Tools
Try factory reset + , format system and install again ...
i have HW problem with this phone ... broken Gorrila Glass an bad microUSB connector ...
Here's akkot last release:
https://docs.google.com/file/d/0B9o-XUuuXVDjZGNOUlRfbnhsRGc/edit
This is a Cube U35GT2 Custom firmware builded by Tuen from Vondroid.com.
Based on OFW V1.05 with following changes:
CWM Recovery (ClockWorkMod)
Rooted
Debloated Chinese Software
Add apps (Youtube, ES File Explorer)
Apps updated
Ads block (host file)
Partial Build.prop optimise
Init.d support
Support extra .ko files (Tun.ko, cifs.ko, nls,…)
Default language English/Default location London
Wifi optimise
…
Download url: http://vondroid.com/resources/cfw-vondroid-cube-u35gt2-v1-x.431/
try also ask question on the vondroid forum to get better overview
leeyuentuen said:
This is a Cube U35GT2 Custom firmware builded by Tuen from Vondroid.com.
Based on OFW V1.05 with following changes:
CWM Recovery (ClockWorkMod)
Rooted
Debloated Chinese Software
Add apps (Youtube, ES File Explorer)
Apps updated
Ads block (host file)
Partial Build.prop optimise
Init.d support
Support extra .ko files (Tun.ko, cifs.ko, nls,…)
Default language English/Default location London
Wifi optimise
…
Download url: http://vondroid.com/resources/cfw-vondroid-cube-u35gt2-v1-x.431/
try also ask question on the vondroid forum to get better overview
Click to expand...
Click to collapse
Known bugs, what work and what not? comments? Will follow to support this ROM? Is multilanguage?
Hi guys !
No Android 4.4 for Cube U35GT2 ?
This version works good but after 2 weeks use i have problem when i install new app or an update from Google Play my tablet freeze until the install end. Another i have some lag and microfreeze everytime. I tried rom toolbox, SD Booster and some other stuff nothing change.
I like to think to 4.4 resolve some lag problem ( Android 4.3 60fps )
Hamaa said:
Hi guys !
No Android 4.4 for Cube U35GT2 ?
This version works good but after 2 weeks use i have problem when i install new app or an update from Google Play my tablet freeze until the install end. Another i have some lag and microfreeze everytime. I tried rom toolbox, SD Booster and some other stuff nothing change.
I like to think to 4.4 resolve some lag problem ( Android 4.3 60fps )
Click to expand...
Click to collapse
Sadly.. no
Inviato dal mio MI 3W con Tapatalk 2
robbie2k said:
Sadly.. no
Click to expand...
Click to collapse
Hola,
No news guys ? Best is vondroid based on firmware 1.05 or directly the 1.06 from cube ?
No updated rom since january ? nobody know dev for our cube ?
nice day
Hamaa said:
Hola,
No news guys ? Best is vondroid based on firmware 1.05 or directly the 1.06 from cube ?
No updated rom since january ? nobody know dev for our cube ?
nice day
Click to expand...
Click to collapse
Hi, you tried the Vondroid ROM? is better than stock? and stable?
Hi Guys,
Yes it's better than Official chinese firmware. But nobody has never update it since this one. I tried Oma but i have some battery drain.
If somebody can make a new firmware i can be the tester.
hi all.
before the issue, i wanna thank for your answers.
I've an Xperia L and i've installed CM 12.1 since about 3 days; but unfortunately found that i can't use WIFI.
I searched and found some reasons pointing that the error might be for my country's region and Google (US) restriction, i'm living in IR Iran.
is there any other ways to fix this hell bug?? All i need from my device is WIFI...& i'm not gonna change the ROM again.
parhamb_76 said:
hi all.
before the issue, i wanna thank for your answers.
I've an Xperia L and i've installed CM 12.1 since about 3 days; but unfortunately found that i can't use WIFI.
I searched and found some reasons pointing that the error might be for my country's region and Google (US) restriction, i'm living in IR Iran.
is there any other ways to fix this hell bug?? All i need from my device is WIFI...& i'm not gonna change the ROM again.
Click to expand...
Click to collapse
Hey, I'm not sure what your exact issue is but I will present you some possible solutions.
1. Was your wifi broken since you flashed CM12.1? If yes:
What stock version did you have before CM? If it wasn't 15.3.A.1.17 (or if you don't know), flash FTF of this version. Then flash CM12.1 again by flashing the kernel img and then the zip file.
2. Sometimes, the wifi just doesn't work because the wpa_suplicant.conf is broken. This file stores all the wifi passwords. Open the file manager and go to /data/misc/wifi and delete the file. You will lose your passwords, but your wifi will work! If you forgot your passwords, copy the file to another directory before deleting it.
I hope this can help you, please tell me if it did!
Sent from a device in our universe
GreyLDroid said:
Hey, I'm not sure what your exact issue is but I will present you some possible solutions.
1. Was your wifi broken since you flashed CM12.1? If yes:
What stock version did you have before CM? If it wasn't 15.3.A.1.17 (or if you don't know), flash FTF of this version. Then flash CM12.1 again by flashing the kernel img and then the zip file.
2. Sometimes, the wifi just doesn't work because the wpa_suplicant.conf is broken. This file stores all the wifi passwords. Open the file manager and go to /data/misc/wifi and delete the file. You will lose your passwords, but your wifi will work! If you forgot your passwords, copy the file to another directory before deleting it.
I hope this can help you, please tell me if it did!
Sent from a device in our universe
Click to expand...
Click to collapse
hi there and thanks for the answer,
well my case was absolutly the number 1.
i lost my WIFI just after flashing into CM12.1
bafore that i had the original update of 4.1.2 jelly bean android version.
i also had flashed the deice after installing cm 12 into the jelly bean using this tft file: C2105_15.0.A.2.17_Customized-CE.ftf
it was the original OS from factory on my device, the WIFI worked correctly and i could use that & tethering & hotSpot
but when i flashed again into cm 12.1 i lost the WIFI & hotSpot again :|
note:i flashed the device using thunderzup kernel. could it be the cause of problem?
i'm still using the cm 12.1 & it's good.but the wifi problem.
i've the following bugs:
-WIFI can't be turned on in anyways
-the notification light doesn't work correctly sometimes
-the LED light can't be switched off from the notification bar once i switch it on,from that area.
parhamb_76 said:
hi there and thanks for the answer,
well my case was absolutly the number 1.
i lost my WIFI just after flashing into CM12.1
bafore that i had the original update of 4.1.2 jelly bean android version.
i also had flashed the deice after installing cm 12 into the jelly bean using this tft file: C2105_15.0.A.2.17_Customized-CE.ftf
it was the original OS from factory on my device, the WIFI worked correctly and i could use that & tethering & hotSpot
but when i flashed again into cm 12.1 i lost the WIFI & hotSpot again :|
note:i flashed the device using thunderzup kernel. could it be the cause of problem?
i'm still using the cm 12.1 & it's good.but the wifi problem.
i've the following bugs:
-WIFI can't be turned on in anyways
-the notification light doesn't work correctly sometimes
-the LED light can't be switched off from the notification bar once i switch it on,from that area.
Click to expand...
Click to collapse
As i know the ThunderZap kernel for Xperia L should get your WiFi work..
Try Zapdos kernel/stock kernel for xperia l.
i'm on Stryflex lollipop 5.1.1 Rom (CM 12.1 based). i don't have a wifi problem.
Use Light Flow Lite - LED Control from play store for customize LED notification.
ishan.ranatunga said:
As i know the ThunderZap kernel for Xperia L should get your WiFi work..
Try Zapdos kernel/stock kernel for xperia l.
i'm on Stryflex lollipop 5.1.1 Rom (CM 12.1 based). i don't have a wifi problem.
Use Light Flow Lite - LED Control from play store for customize LED notification.
Click to expand...
Click to collapse
aye , seems i've to do a same work
i'm goona flash into stryflex in this weekend...let's hope it works...anyway else i should throw the phon away...
Hi XDA Experts,
Just want to know that can any one develop some custom rom for Swipe Elite (Pro and Sense) both are same just for branding only i tested stock rom of both pro and sense works on each other without any issue.
These both phones have virus problem which is there in its system/framwork/ and all files are compiled.
I tried Lineage-13.0-20170307-UNOFFICIAL-rolex which is for Redmi 4A it works perfectly only 4 issues
External Spearker not Working
Wifi not working 02:00:00:000 mac problem with stock rom working fine
Camera not working
Fingerprint sensor
Other then above all working fine can someone from XDA community try to fix the issue ...?
regards,
Birender
hi
swipe elite sense fuuly virus track 24 trojen com. etc., how to get rid of this.
Finally good news for Swipe Elite Pro and Elite Sense
[email protected] said:
hi
swipe elite sense fuuly virus track 24 trojen com. etc., how to get rid of this.
Click to expand...
Click to collapse
After spending lot of time in research finally i compiled a custom ROM which works perfectly.
1. Wifi working
2 Camera : Working on it
3. Buletooth working
4. VoLTE Working
5. 4G all Airtel / Vodafone / BSNL and JIO
6. Fingerprint : Working on it but dosn't matter
8. Google Play Store Working - Now a days google not allowing their play store on non certificated devices.
link
bsbudhwar said:
After spending lot of time in research finally i compiled a custom ROM which works perfectly.
1. Wifi working
2 Camera : Working on it
3. Buletooth working
4. VoLTE Working
5. 4G all Airtel / Vodafone / BSNL and JIO
6. Fingerprint : Working on it but dosn't matter
8. Google Play Store Working - Now a days google not allowing their play store on non certificated devices.
Click to expand...
Click to collapse
please provide link for your rom to download
[email protected] said:
hi
swipe elite sense fuuly virus track 24 trojen com. etc., how to get rid of this.
Click to expand...
Click to collapse
watch this bro its working for me
search for " manish 369 " youtube channel
---------- Post added at 09:51 AM ---------- Previous post was at 09:47 AM ----------
bsbudhwar said:
Hi XDA Experts,
Just want to know that can any one develop some custom rom for Swipe Elite (Pro and Sense) both are same just for branding only i tested stock rom of both pro and sense works on each other without any issue.
These both phones have virus problem which is there in its system/framwork/ and all files are compiled.
I tried Lineage-13.0-20170307-UNOFFICIAL-rolex which is for Redmi 4A it works perfectly only 4 issues
External Spearker not Working
Wifi not working 02:00:00:000 mac problem with stock rom working fine
Camera not working
Fingerprint sensor
Other then above all working fine can someone from XDA community try to fix the issue ...?
regards,
Birender
Click to expand...
Click to collapse
After installation boot animation was shown and
then screen was just blinking
can't boot into ROM what to do?
did you encountered like this?
any solutions please !