Related
I've Owned my S2 LTE I727R for 3 months now, but I've had a serious issue that recently came up.
Whenever I plug my phone in to the Original Charger, I smell a plastic burning smell and it does not charge (plugging into a laptop yields similar results). A quick search indicates that the phone would need to be warrantied/RMA-ed.
My problem is I am rooted, using Sky-Ics RC 6.75 ROM. I am concerned (should i be?) that my modifcation of the phone would void warranty, so I would like to revert it back to stock. The thread in the development forum indicates a usb connection to the phone is neccesary for stock rom revert. Is there a work around for this?
My battery is also currently dead, so to even attempt a revert to stock, I would need to be an external battery charger.
Advice would be much appreciated, I hope I'm not holding 500 dollars of plastic...
the usb port daughterboard only costs $10 to replace. Mine originally came with a rev 4.5 board but i bought about 5 replacements that are rev 4.1 and they work fine in my skyrocket.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Learic said:
the usb port daughterboard only costs $10 to replace. Mine originally came with a rev 4.5 board but i bought about 5 replacements that are rev 4.1 and they work fine in my skyrocket.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
Thanks for the quick response. I did take a look around and couldn't find anything regarding the instructions to replacing the "usb port daughterboard".
As for the actual part, does the REV matter? The ones on ebay appear to be oem or Rev 0.1?
protonova said:
Thanks for the quick response. I did take a look around and couldn't find anything regarding the instructions to replacing the "usb port daughterboard".
As for the actual part, does the REV matter? The ones on ebay appear to be oem or Rev 0.1?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1253969
doesn't say specifically for your needs but it is a full tear down.
Hope this helps
if u just decide to email it, simply use any free FTP server from the market and connect it to ur wifi. Upload a stockish looking rom to ur phone and then flash it with cwm. This should work for ur purposes
gounlock.com sells the small daughterboard with the USB port.they carry the different revisions but they just don't have the rev 4.5. They do have the rev 4.1 board on page 2 of the i727 stuff. That's where I've ordered my parts from.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Just watchout, my USB went on fire when I had it plugged in to my phone.
I just called att and they are sending me a replacement over mine. it isnt completely borked...i can at least hold it in place long enough to revert
Sent from my SGH-T989 using XDA App
Personally, if I buy a $600 phone and I so much as even SUSPECT that something is broken, so I don't waste my time trying to fix it. Call the carrier and ask for a new one, I have warranty and I use it.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
protonova said:
I've Owned my S2 LTE I727R for 3 months now, but I've had a serious issue that recently came up.
Whenever I plug my phone in to the Original Charger, I smell a plastic burning smell and it does not charge (plugging into a laptop yields similar results). A quick search indicates that the phone would need to be warrantied/RMA-ed.
My problem is I am rooted, using Sky-Ics RC 6.75 ROM. I am concerned (should i be?) that my modifcation of the phone would void warranty, so I would like to revert it back to stock. The thread in the development forum indicates a usb connection to the phone is neccesary for stock rom revert. Is there a work around for this?
My battery is also currently dead, so to even attempt a revert to stock, I would need to be an external battery charger.
Advice would be much appreciated, I hope I'm not holding 500 dollars of plastic...
Click to expand...
Click to collapse
Sorry I failed to even respond to you and just commented. You have a micro sd card? Load up any i9100 ROM on it. Goto CWM and flash to brick. Head over to the closest rogers PLUS store and go WTF!!!!!
They will ask you, what did you do? Nothing. I was sleeping and when I woke up. It was dead. I don't know what happened.
Your replacement phone will arrive via courier within a week. The only cost endured in this ordeal will be the extra battery that you have to buy or the external charger that you have to buy. Or you can even goto someone else that has a I727R and do it right there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Thanks for all the comments. Wanted to update.
I got recommended to a cell repair shop; called them and ordered the part - they replaced it in front of me. He wasn't the most cautious with the phone, but lets chalk that up to familiarity with dissembly (lol).
kr3w1337, that was my last resort option. I couldn't survive a week without my phone! Hopefully this replacement won't come to bite me later.
protonova said:
Thanks for all the comments. Wanted to update.
I got recommended to a cell repair shop; called them and ordered the part - they replaced it in front of me. He wasn't the most cautious with the phone, but lets chalk that up to familiarity with dissembly (lol).
kr3w1337, that was my last resort option. I couldn't survive a week without my phone! Hopefully this replacement won't come to bite me later.
Click to expand...
Click to collapse
I'd still brick it and ask for a new phone at this point since the one you have has been violated ...
so i've gotten my hands on a galaxy s3, which i'm super pumped about, but it had a bad charge port. seems to have been corroded with sweat (the woman ran with it in her shirt lol) so i cleaned it up hardcore with some rubbing alch etc, but i cannot get it to charge correctly anymore. basically, it might charge half a percent per every hour or so....like, something incredibly slow. last night i left it on from 8pm until 10am the next day, and it only went up about 26%.
when plugged into PC, the comp tells me unrecognized USB device, blah blah blah, can't install drivers..so clearly there's something up with the charge port. now i've found a replacement on ebay for only 5 bucks, which is awesome..however, i don't know what kind of task it would be to replace the charge port, as i've never done it before.
anyone have any experience, or have any better methods to clean out the current port? i've used a toothbrush with rubbing alch, and then a toothpick to fine clean it in there, and then i blow it out with compressed air after i let it sit a bit just to fully dry it out. again, it'll charge, but so horribly slow...and thing is, it even says AC charging, too.
here's a pic as an example:
Why wouldn't you just go to Verizon and get a replacement? or even a 14 day swap if you're in the 14 days?
lol bc it's not my phone..i bought it off a customer at my store since it was busted (she bought another one lol) and either way, we can't warranty it because she has two small cracks in the two corners..she's obviously dropped it within the 1 week she had it anyway.
What??? Jayochs! Sorry I don't have anything to contribute but there is a thread on here of a guy who disassembled a GS3 so maybe that will help you get an idea?
Here's the link to that thread http://forum.xda-developers.com/showthread.php?p=29166420
Sent from my SCH-I535 using Tapatalk 2
thanks man! ugh, that charge port looks horrible to have to replace.... i might screw the phone up.
jayochs said:
thanks man! ugh, that charge port looks horrible to have to replace.... i might screw the phone up.
Click to expand...
Click to collapse
NP man. Maybe the OP of that thread may have some tips. Its worth a shot.
Good luck and see you around!
Sent from my SCH-I535 using Tapatalk 2
that's IF i can get this thing repaired lol
so i got the charge port today finally....i also got an external battery charger and 2 aftermarket batteries in the mean time (problem is it takes like 10 hours to charge from 0 to 100%......crappy charger)
so now i have this tinyyy little USB port, and i've never really taken a phone apart before, especially doing soldering work on a PCB.
does anyone have any experience or anything replacing it on this phone yet? i'm scared to do it myself, but i absolutely need to fix this charge port so i can charge normally and root, etc
damn, nevermind...just read that you need a hot air soldering gun to do it, and i don't have one of those. i guess there's nothing left to do but just swap batteries in and out of it..no root for me
jayochs said:
damn, nevermind...just read that you need a hot air soldering gun to do it, and i don't have one of those. i guess there's nothing left to do but just swap batteries in and out of it..no root for me
Click to expand...
Click to collapse
You could always take it to a pc repair shop. They'll probably charge you $20 to do it, especially if the phone is already taken apart.
Sent from my SCH-I535 using xda app-developers app
jayochs said:
damn, nevermind...just read that you need a hot air soldering gun to do it, and i don't have one of those. i guess there's nothing left to do but just swap batteries in and out of it..no root for me
Click to expand...
Click to collapse
Stop being a baby. Sell the rezound and buy an S3! Aren't you in jersey? If so I have a guy just over the border in PA that could do the repair if you can get the parts.
Sent from my SCH-I535 using xda app-developers app
joebrady119 said:
Stop being a baby. Sell the rezound and buy an S3! Aren't you in jersey? If so I have a guy just over the border in PA that could do the repair if you can get the parts.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
lol why would i sell the rezound to get ANOTHER s3? i arleady have one just gotta fix the port. it's been active on my acct for like a week already lol i use it everyday, i just have 3 batteries to swap in/out
*sigh* you're here too? This is going to be the rezound forum all over again lol...
Sent from my SCH-I535 using xda app-developers app
I would gladly fix your charge port for a price. The main thing about diy is do not be afraid of breaking something, your s3 and other electronics are built sturdier than people think...... Think how hard people drop em and they still work. But don't just go taking on stuff, be careful just don't be afraid and renege where everything went and in what order. Its really simple. I've been working on phone hardware and xboxs, ps3s etc for a few years now..... I'm just not getting into the software stuff
Sent from my SPH-D710 using xda app-developers app
If you are really worried about doing the repair your self, and can't find someone to do it at a reasonable price......I would just do the palm stone wireless charging mod.
The needed parts are ten bucks on Amazon
jayochs said:
lol why would i sell the rezound to get ANOTHER s3? i arleady have one just gotta fix the port. it's been active on my acct for like a week already lol i use it everyday, i just have 3 batteries to swap in/out
Click to expand...
Click to collapse
There is a guy in red bank
that replaces ports for like $60. He was going to repair my GS2 (my last phone) but I just bought a phone with a cracked screen and swapped the board instead. PM me if you would like his number but he advertises on craigslist.
awesome, thanks for the info! the only real reason i want this port working is so i can root, so that wireless charging method isn't really for me, but thanks for suggestions guys!
Charging port repair
So what is the guys ph # for repairs? or do you have a link to a DIY video so I can see it and adventure myself into it.??
Thank you kindly
Bill
FormulaLT1 said:
There is a guy in red bank
that replaces ports for like $60. He was going to repair my GS2 (my last phone) but I just bought a phone with a cracked screen and swapped the board instead. PM me if you would like his number but he advertises on craigslist.
Click to expand...
Click to collapse
I plan to use this video to reference how to fix my gs3 should anything go wrong with my device in the future. I found this video on YouTube which explains disassembly and reassembly really well. Looks like the charging port is soldered to the main board.
https://www.youtube.com/watch?v=eo93EF7rVIw&feature=youtube_gdata_player
Sent from my SCH-I535 using xda premium
Vidurg said:
I plan to use this video to reference how to fix my gs3 should anything go wrong with my device in the future. I found this video on YouTube which explains disassembly and reassembly really well. Looks like the charging port is soldered to the main board.
https://www.youtube.com/watch?v=eo93EF7rVIw&feature=youtube_gdata_player
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Charge ports four everything are soldered to the motherboard
Sent from my SPH-D710 using xda premium
I probably know the answer to this but is there any way to return to stock while not having use of USB data?
Sent from my SGH-I997 using xda app-developers app
I think there's probably a small crowd of people that are looking for this ability. I've not heard of a solution to go back once you lose USB.
Sent from Tapatalk 2.
I know of one but our device isn't supported but it's too use mobile Odin , I think I'm just gonna fix the port via replacing it but I don't have all the tools to do so, I need a small tip for my soldering iron
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Cheap fix
I may be the only one that gets this lucky, but I was having a lot of trouble with my usb port being seen by computer. It got to the point that I had to get the phone ad cable just right to charge. I decided last night I had to do something or replace phone. I powered down phone and squirted lighter fluid in the usb port,then took a toothpick and piece of rag and cleaned best I could. Phone is working great now. All of my cables are charging and being seen by computer.
I was at point of replacing phone anyway,so don't try if your not prepared for failure, but good luck and let me know if you have success with this.
elbscorp said:
I may be the only one that gets this lucky, but I was having a lot of trouble with my usb port being seen by computer. It got to the point that I had to get the phone ad cable just right to charge. I decided last night I had to do something or replace phone. I powered down phone and squirted lighter fluid in the usb port,then took a toothpick and piece of rag and cleaned best I could. Phone is working great now. All of my cables are charging and being seen by computer.
I was at point of replacing phone anyway,so don't try if your not prepared for failure, but good luck and let me know if you have success with this.
Click to expand...
Click to collapse
And so it happens.
I hooked up my phone and made a file transfer and then...usb stopped functioning.
I tried a whole bunch of stuff, thinking it was just the pc or the driver recognition..but no go. Even after pc wipe and reinstall OS and drivers. No luck.
The sad part is that I was on a rooted 2.3.6 but after a wipe, the stock sammy recovery replaced the cwm recovery.
No usb means no return.
I did try to use alcohol, wiped and scrubbed. I even opened the phone and try a few cleanings. Even disassembled
No luck.
I know this is available:
http://forum.xda-developers.com/showpost.php?p=43451544&postcount=6
This seemed more fun though:
http://www.youtube.com/watch?v=Ao5T9_XcCrU
And this is what I have until I get this:
http://www.ebay.com/itm/Lot-3-USB-C...e_Replacement_Parts_Tools&hash=item20cdd2f5ec
attached photos
qkster said:
And so it happens.
I hooked up my phone and made a file transfer and then...usb stopped functioning.
I tried a whole bunch of stuff, thinking it was just the pc or the driver recognition..but no go. Even after pc wipe and reinstall OS and drivers. No luck.
The sad part is that I was on a rooted 2.3.6 but after a wipe, the stock sammy recovery replaced the cwm recovery.
No usb means no return.
I did try to use alcohol, wiped and scrubbed. I even opened the phone and try a few cleanings. Even disassembled
No luck.
I know this is available:
http://forum.xda-developers.com/showpost.php?p=43451544&postcount=6
This seemed more fun though:
http://www.youtube.com/watch?v=Ao5T9_XcCrU
And this is what I have until I get this:
http://www.ebay.com/itm/Lot-3-USB-C...e_Replacement_Parts_Tools&hash=item20cdd2f5ec
attached photos
Click to expand...
Click to collapse
hey let me know how your repair goes, i dont have the tools to do it myself, or i would but if yours goes well, let me know i may ask you to do mine if thats alright with you?
so i just tried to go back to stock via flashing rom via recovery, and lets just say... that didnt go so well, i have no os recovery is borked ... kernel seems fine but no usb data so my infuse if ****ed until i can get the usb fixed
qkster said:
And this is what I have until I get this:
http://www.ebay.com/itm/Lot-3-USB-C...e_Replacement_Parts_Tools&hash=item20cdd2f5ec
Click to expand...
Click to collapse
If you don't want to spend $100+ on a Weller micro-solder setup or on the "professionals" take a look at this item... might fit the bill for the project.
http://www.amazon.com/Coopertools-S...78319450&sr=1-3&keywords=micro+soldering+iron
btw... what's that discoloration on the main circuit board shield? it almost looks like some kind of chemical corrosion took place .... just sayin'
Please keep us informed on how it goes. The naphtha which is a stronger cleaner than alcohol worked for a little while,but I'm starting to have a few cables not read again
Zen Arcade said:
If you don't want to spend $100+ on a Weller micro-solder setup or on the "professionals" take a look at this item... might fit the bill for the project.
http://www.amazon.com/Coopertools-S...78319450&sr=1-3&keywords=micro+soldering+iron
btw... what's that discoloration on the main circuit board shield? it almost looks like some kind of chemical corrosion took place .... just sayin'
Click to expand...
Click to collapse
Ya know..come to think of it, I think that resembles water and chlorine dried up on a metallic surface of PCB board doesn't it? I'm still trying to figure out how that happened.
@deathblade:
I had on old solder iron I bought from Big Lots years ago for about $4-$5.
I filed the point down using a whetstone. You can use a file or just the rough surface like cement, brick, clay or just the bottom of a ceramic plate.
The one Zen suggested looks good.
Here is another inexpensive source:
http://www.harborfreight.com/30-watt-lightweight-soldering-iron-69060.html
Just take your time.
If you never done it before, open an old electronic part and practice.
I'm not an expert at this. I feel comfortable in sacrifice my phone for parts but I don't like the idea of messing up someone else's phone.
It's better if someone else messes up their phone though.
I did buy 10 of the usbs charging port. If it works and you guys need one, hit me up, I mail you one at cost and stamp. (~$1.70ea + stamp)
qkster said:
Ya know..come to think of it, I think that resembles water and chlorine dried up on a metallic surface of PCB board doesn't it? I'm still trying to figure out how that happened.
@deathblade:
I had on old solder iron I bought from Big Lots years ago for about $4-$5.
I filed the point down using a whetstone. You can use a file or just the rough surface like cement, brick, clay or just the bottom of a ceramic plate.
The one Zen suggested looks good.
Here is another inexpensive source:
http://www.harborfreight.com/30-watt-lightweight-soldering-iron-69060.html
Just take your time.
If you never done it before, open an old electronic part and practice.
I'm not an expert at this. I feel comfortable in sacrifice my phone for parts but I don't like the idea of messing up someone else's phone.
It's better if someone else messes up their phone though.
I did buy 10 of the usbs charging port. If it works and you guys need one, hit me up, I mail you one at cost and stamp. (~$1.70ea + stamp)
Click to expand...
Click to collapse
The, I understand where your coming from I do have some experience with soldering but not as much as I'd like I to however have plenty experience with replacing non soldered hardware, and do to past events I don't have any old devices to practice on, I might take you up on that offer for the part, though I wouldn't know how much the stamp would be, as I never mailed anything before, you wouldn't happen to also have any spare power buttons would you? Lol my Cappy's doesn't work, tried to reset the solder as I've heard that might help but instead it turned everything displayed on the screen blue for a while <<<weird lol
Sent from my SGH-I747 using xda app-developers app
deathblade said:
The, I understand where your coming from I do have some experience with soldering but not as much as I'd like I to however have plenty experience with replacing non soldered hardware, and do to past events I don't have any old devices to practice on, I might take you up on that offer for the part, though I wouldn't know how much the stamp would be, as I never mailed anything before, you wouldn't happen to also have any spare power buttons would you? Lol my Cappy's doesn't work, tried to reset the solder as I've heard that might help but instead it turned everything displayed on the screen blue for a while <<<weird lol
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
us stamp is $.46 -first class - 1oz
I havent had any issue with the power button yet so i dont have any spare on hand.
i saw them on ebay though
http://www.ebay.com/itm/5x-POWER-SW...e_Replacement_Parts_Tools&hash=item19e04d52f9
works out to be about $3/ea
i'll have the ports..you'll the buttons..we can trade.
qkster said:
us stamp is $.46 -first class - 1oz
I havent had any issue with the power button yet so i dont have any spare on hand.
i saw them on ebay though
http://www.ebay.com/itm/5x-POWER-SW...e_Replacement_Parts_Tools&hash=item19e04d52f9
works out to be about $3/ea
i'll have the ports..you'll the buttons..we can trade.
Click to expand...
Click to collapse
Lol we shall be the peripheral supply
Sent from my SGH-I747 using xda app-developers app
I just found this http://www.multi-com.pl/index.php/en_US,details,id_pr,8831,menu_mode,categories.html sounds like it would really help
Sent from my SGH-I747 using xda app-developers app
deathblade said:
I just found this http://www.multi-com.pl/index.php/en_US,details,id_pr,8831,menu_mode,categories.html sounds like it would really help
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
yeah. I recalled that. but you need that board and the riff box and others. not feasible for one infuse unless you are planning a side line business of jtagging infuses.
for the cost of that setup, you could buy 2 working infuses or a later phone model
elbscorp said:
Please keep us informed on how it goes. The naphtha which is a stronger cleaner than alcohol worked for a little while,but I'm starting to have a few cables not read again
Click to expand...
Click to collapse
I had severed the 7 pins with an exacto blade.
de-soldered the points
cleaned up the points
socketed in the new port
seems to fit
soldered in the new port.
slightly sloppy but seated well
re-assembled.
no reading or charge
I think it's due to poor new pin/old pin contacts.
prolly could have used better equipments or techniques
I left the new port in place and prolly will just send it to the mobiletech guys
i have 9 brand new ports available.
Just an update guys...
I soldered the new port on. My first attempt. Kinda sloppy actually. I wasn't able to clean off the old materials very well as I had concern about over heating the board. I think having the correct materials, solders, flux, magnifiers, and heat shield cloth and such may help. My attempt did not work. I suspect I was not able to get the 7pins to touch or connect properly.
I sent mine to mobiletechvideo without the port.
It's about 10 days turn around. It came back working. I was not expecting it to boot up and was ready to flash it back to stock myself but it came back with the leaked GB KK4 firmware installed. Kinda odd I guess as most of the return to stock on XDA were either UCKE3, UCKJ4 or UCLB3.
Although when I have the Infuse on the data cord at an angle that stress the connection, the computer reports the device as unknown. I suspect it is not as good as factory ship but good enough for me to restore the phone to function.
I'll have to keep an eye on the connection for now.
Conclusion: it can be done..but better success if you have the proper equipment for micro welding.
Glad to hear it's working
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So Tuesday I took a couple pics with my s3, then plugged in my usb otg to transfer some pics to that to put onto my ONE, then forgot about it. Last night i picked it up and noticed it was dead, thought that was strange but maybe i left wifi on and didnt give it a full charge before. So I plugged it into that charger last night and forgot about it. Decided wanted to take a couple pics with it today and its dead still. Like totally dead. I put a different battery in and still nothing. Been on the charger fpor a bit, nothing. I get no lights, no vibrate, nothing. Any idea why it would just die like that? Its a replacement from verizon from about August, used until mid september when I got my ONE. Kept my s3 for the camera. Any ideas what the issue is and if its bricked somehow? I was running andys bonestock, havent flashed or touched anything on it in sometime so a bit confused what the issue is.
jessbowring said:
So Tuesday I took a couple pics with my s3, then plugged in my usb otg to transfer some pics to that to put onto my ONE, then forgot about it. Last night i picked it up and noticed it was dead, thought that was strange but maybe i left wifi on and didnt give it a full charge before. So I plugged it into that charger last night and forgot about it. Decided wanted to take a couple pics with it today and its dead still. Like totally dead. I put a different battery in and still nothing. Been on the charger fpor a bit, nothing. I get no lights, no vibrate, nothing. Any idea why it would just die like that? Its a replacement from verizon from about August, used until mid september when I got my ONE. Kept my s3 for the camera. Any ideas what the issue is and if its bricked somehow? I was running andys bonestock, havent flashed or touched anything on it in sometime so a bit confused what the issue is.
Click to expand...
Click to collapse
It's bad luck, there's a whole thread describing this issue. As a general rule you shouldn't plug anything into the phone, but there's no way you Could've known that.
http://forum.xda-developers.com/showthread.php?p=33882126
Basically I'd check and see if you can plug it into your pc and see if it'll recognize it at all. Sometimes it'll show up as an unusual drive qusb_dload and that can be fixed. Alternatively, you can plug it into a charger without the battery, if the red light comes on that can be fixed also. If nothing works, you may have shorted the power supply which is a different problem.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
It's bad luck, there's a whole thread describing this issue. As a general rule you shouldn't plug anything into the phone, but there's no way you Could've known that.
http://forum.xda-developers.com/showthread.php?p=33882126
Basically I'd check and see if you can plug it into your pc and see if it'll recognize it at all. Sometimes it'll show up as an unusual drive qusb_dload and that can be fixed. Alternatively, you can plug it into a charger without the battery, if the red light comes on that can be fixed also. If nothing works, you may have shorted the power supply which is a different problem.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Ive been using the on the go usb for a while now transferring pics i take with the s3 to my one and to store photos or other files from my ONE. Never had a problem with it. It is not picked up by my pc at all nor do i get a red light or any light with or without the battery. How do i determine if this is just a power issue and not a brick issue? Im not sure how i could have bricked it just by copying pics from the phone to the otg.
EDIT: So after reading that thread, im thinking this is likely my issue as well. It didnt happen immediately on plugging it in tho cause i was watching some of the files transfer before going back to watching my movie on tv. Is this issue just on the S3? Or should i be worried about this with my ONE as well since i have no sd card in that?
jessbowring said:
Ive been using the on the go usb for a while now transferring pics i take with the s3 to my one and to store photos or other files from my ONE. Never had a problem with it. It is not picked up by my pc at all nor do i get a red light or any light with or without the battery. How do i determine if this is just a power issue and not a brick issue? Im not sure how i could have bricked it just by copying pics from the phone to the otg.
EDIT: So after reading that thread, im thinking this is likely my issue as well. It didnt happen immediately on plugging it in tho cause i was watching some of the files transfer before going back to watching my movie on tv. Is this issue just on the S3? Or should i be worried about this with my ONE as well since i have no sd card in that?
Click to expand...
Click to collapse
I think you're better off not using it, but I wouldn't know for sure on the one. The power issue would be a much bigger problem then a hard brick because getting parts to fix it might not be worth the cost. Plus you need to find someone who can fix that.
If you're still under warranty just bring it in and get a new one.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
I think you're better off not using it, but I wouldn't know for sure on the one. The power issue would be a much bigger problem then a hard brick because getting parts to fix it might not be worth the cost. Plus you need to find someone who can fix that.
If you're still under warranty just bring it in and get a new one.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I just had it replaced in august so would think this would still be warrantied?
jessbowring said:
I just had it replaced in august so would think this would still be warrantied?
Click to expand...
Click to collapse
Probably, it's worth a shot.
Sent from my SCH-I535 using Tapatalk 2
First, I bought this device the day it came out on ATT. I love it, but I do not know if is a malfunction of my phone or all of them are the same. When I try to connect the USB cable it gives me a really hard time cause is like if something is blocking the port. I have tried with different cables, but all of them give me the same result. I have to push really hard to get it connected and I think is something that should not happen, I want to know if you guys have the same problem or if this is something happening just to me. Thanks. :fingers-crossed:
When inserting your cord tilt it down after you first insert it. Takes a bit getting used too, but it's smoother that way. Mine does that as well.
Sent from my G3 using XDA Premium 4 mobile app
same issue with my (T-Mobile)
wilberatilioa said:
First, I bought this device the day it came out on ATT. I love it, but I do not know if is a malfunction of my phone or all of them are the same. When I try to connect the USB cable it gives me a really hard time cause is like if something is blocking the port. I have tried with different cables, but all of them give me the same result. I have to push really hard to get it connected and I think is something that should not happen, I want to know if you guys have the same problem or if this is something happening just to me. Thanks. :fingers-crossed:
Click to expand...
Click to collapse
I'm glad you posted this as I picked my last Wednesday from T-Mobile store. Everything works great on the phone , the only issue is plugging the charging cable in. I tried my other chargers as well but same with all of.them. trick is to tilt downward and it goes in. I don't know if I should exchange for a new one?
Same here. I don't think it's a big deal. Just gotta angle it a bit
Sent from my LG-D850 using Tapatalk
It's that way for everyone. Once you've done it a couple times, you'll start doing it without thinking.
Dustin.Dwayne said:
When inserting your cord tilt it down after you first insert it. Takes a bit getting used too, but it's smoother that way. Mine does that as well.
Sent from my G3 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It works, too bad I waited too long to ask because I have a couple of scratches now
wilberatilioa said:
It works, too bad I waited too long to ask because I have a couple of scratches now
Click to expand...
Click to collapse
Yeah, same here. Though I have noticed that the micro USB connector on the stock cable features a couple of extra "hooks" that my other chargers don't have.
My old charger connector goes into the G3 a lot more effortlessly. However, when using that non-LG charger, the phone buzzes randomly for the first few minutes after being plugged in. Sounds like I'm getting a notification, but there's nothing showing. Bugged me to no end, so now I'm back to the new LG charger. I may try to just swap out the cable and see what happens.
joe23521 said:
Yeah, same here. Though I have noticed that the micro USB connector on the stock cable features a couple of extra "hooks" that my other chargers don't have.
My old charger connector goes into the G3 a lot more effortlessly. However, when using that non-LG charger, the phone buzzes randomly for the first few minutes after being plugged in. Sounds like I'm getting a notification, but there's nothing showing. Bugged me to no end, so now I'm back to the new LG charger. I may try to just swap out the cable and see what happens.
Click to expand...
Click to collapse
Yeah there's something up with other Micro USB cables.. My car charger causes the phone to do this exact same thing.
Mine does the exact same thing. One thing I did notice is the charger seems to fit better and be more snug, making it less likely for charging issues to occur like the cord coming out. Im still getting used to the way to plug it in, but i like it a lot more. I constantly had the cord being loose or having to be in a certain position on my HTC One X+. Glad to know mine isnt the only one that way. :good:
Any new updates on this? My still needs to be tilted in order to get in. I don't think this will change?
Sent from my LG G3
Sini-Siki said:
Any new updates on this? My still needs to be tilted in order to get in. I don't think this will change?
Sent from my LG G3
Click to expand...
Click to collapse
Both of my G3s do this. I had a F400S (Korean model) and it was the same way. Its most likely how it was designed.
Sent from my LG-D850 using XDA Premium 4 mobile app
Even i had the same problem. First i thought i got a phone with malfunctioned usb port, then i found that i have to use a different angle to push the cable in.
it makes it more secure, you're less likely to break it this way... it's not a bad thing
my new tMobile G3 is doing the same freak'n thing.
the phone itself is [email protected]$$ but the port is def. a manufacturer defect.
I don't know where every one is getting this, "more secure" b.s.
It's not more secure and it may very well snap that small extension in half after some time if we're not careful enough.
1miracle2 said:
my new tMobile G3 is doing the same freak'n thing.
the phone itself is [email protected]$$ but the port is def. a manufacturer defect.
I don't know where every one is getting this, "more secure" b.s.
It's not more secure and it may very well snap that small extension in half after some time if we're not careful enough.
Click to expand...
Click to collapse
I think the idea is to give the port a little more flex. there are a lot of returns on phones is the usb port coming loose, and causing improper charging, i think it was an attempt to fix a problem... and your right only time will tell if its worthy fix or just BS... lol
Glad that I found this dedicated thread
I think the fix is way worse than the problem? Now I have to teach my wife.
thank you sharing your experiences
I got a D851 (G3 T-Mobile model) from ebay. I kept thinking it's the cable I used. I don't have this issue on other devices.
I am so glad you sharing all the info here. I was thinking about exchanging it after trying different cables and all does the same.
Thank you guys sharing your experiences here. :good: :highfive: :victory:
Best, J