Database Info

Micro USB port getting loose

The micro USB port on my infuse is getting really loose. Its to the point where if I pick my phone up.while its plugged in and even just check my phone it will fall out shortly after picking it up. Is there anything I can do to try to fix it? Would Samsung do anything about it? I haven't even had it a year yet.
Sent from my SAMSUNG-SGH-I997 using XDA

Awizzle said:
The micro USB port on my infuse is getting really loose. Its to the point where if I pick my phone up.while its plugged in and even just check my phone it will fall out shortly after picking it up. Is there anything I can do to try to fix it? Would Samsung do anything about it? I haven't even had it a year yet.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Yeah, join the club. I had the same problem. I started charging it with the cable to the slightly older model of this. http://www.amazon.com/Western-Digit...Portable/dp/B0041OSAZS/ref=dp_cp_ob_e_title_1 It was a little bit nicer quality than the one that it came with. I would maybe get some backup batteries with a charger. I ordered http://www.amazon.com/Anker-1800mAh...2?s=electronics&ie=UTF8&qid=1335451042&sr=1-2 Then you would no longer have to worry about charging with the cable if you didn't want to. For data transfers you just have to be really careful and don't hit it. I'm actually in the process with Best Buy to getting a new phone. Their black tie plan is covering me and getting me a refurbished phone. But those are your options. Good luck..
And just for the record, I ordered them with a jig thinking that would fix my phone. All that I know is they both charge, and I only bothered trying one of them with put my phone into a bootloop very well.
Thanks >>

I used to connect using cable before even for little data. But now I have a folder called temp in my dropbox, and use that for transferring little little files (unto 100 MB or so) and use wifi to get that data from db to my phone. Saves on battery too cos connecting cable for little times multiple times could take its toll on battery too, not just the port.

HeLlO - Kies Air.

I'm using usb cables from nokia and blackberry they fits more stable for some reason.

No problems with my USB port, however I have been battery swapping since December. I also transfer data via drop box or airdroid. I'm really loving drop box, my wife takes pictures and video of the kids while I'm out of town on business and they automatically get uploaded. Works out pretty well.
Sent from my SAMSUNG-SGH-I997 using XDA

Awizzle said:
The micro USB port on my infuse is getting really loose. Its to the point where if I pick my phone up.while its plugged in and even just check my phone it will fall out shortly after picking it up. Is there anything I can do to try to fix it? Would Samsung do anything about it? I haven't even had it a year yet.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
You could always try to get it back to stock and send it in. It has a year manufacture warranty on it.
Sent from my SAMSUNG-SGH-I997 using xda premium

I had the same problem. Got to the point it wouldn't charge. Called AT&T. After some troubleshooting, they determined I should take to my local service center. It was replaced with a new (refurb) phone. Of course I had to get it completely back to stock. So far happy with the new one. Updated it with stock Gingerbread. Will stay with that for a while.

I've been using dropbox too for data, but it's the charging or charging it in the car that's annoying. Like when using it fir GPS and having the cable pop out all the time makes it annoying. I might try calling att and seeing if I can get anything done under warranty. Should have some time to deal with them soon. Thanks for the ideas.
Sent from my SAMSUNG-SGH-I997 using XDA

phone wont turn on

My phone wont turn on after installing titanmim backup it was working ok and had about 50% battery left but thenit suddenly went off and now wont turn on.

Can it boot into recovery? What happens when you plug it into a charger and try turn it on?

It wont boot in to recovery mode. Am on my way home now so soon as am in am going to try and plug it in to the charger and see but before I installed titanmim backup it had about 50% battery still in it
Just tuck it out of my pocket and the screen feels warm to the touch

Try it when you get home and see how it goes.

Just got in and plugged it in to the charger and it's not coming on the charger light isn't even coming on

How the PC recognize it in the device manager?

At the moment my pc isn't picking it up

Pull the battery, put it back in, then try to power on.
Sent from my HTC Sensation 4G using xda premium

Tried that tried 2 different battery's and 2 different chargers and 2 different laptops

Did you try and turn the phone on without a battery in? I read somewhere that that may help discharge the final bit of power in the phone, but it's probably bull crap.
So no computer sees it at all? Have you ever run ADB or FASTBOOT commands with your computer? I ask because I want to make sure you have proper drivers installed and everything.
The next thing I would do is start downloading a RUU of your liking. I say that becasue it may come down to trying that out, and the download takes a while. Here's a link to the thread: http://forum.xda-developers.com/showthread.php?t=1074559
Any other info you can provide like is it stock, rooted, what ROM, etc. would be helpful.

It rooted and running OrDroid rom from here, It as been running great till tonight when I tried to install titanium back and it just went off with no life in it at all

Sorry to say but it sounds like a lot like what happened to me. My first Sensation just died on me one day. Have a read about it in this thread.

Am starting think that my self as I left it on charge all-night and its still dead. Don't even think it as any warranty left oh well best start saving just a pitty you can't make calls from a galaxy 10.1

freddy0000 said:
Am starting think that my self as I left it on charge all-night and its still dead. Don't even think it as any warranty left oh well best start saving just a pitty you can't make calls from a galaxy 10.1
Click to expand...
Click to collapse
Yeah that is a real shame about the Galaxy 10.1. I have actually been thinking about getting one of those myself. I don't know about the Galaxy 10.1, but my Accer Iconia A500 tablet has a slot for a SD card that has a peice of molded plastic covering the slot. And it is work going on to be able to use it like a phone. Terrible how OEMs lock out a feature like that
Anyway back on topic, if you are interested I can give you contact info to someone that can replace the mainboard for you at a reasonable price. That would be cheaper than buying another device I think. Just PM me if you are interested.

Am in the UK mate

Think ill take my chances and try and sending if off to HTC for repair

Just booked it in now so hopefully they will fix it

Same thing happen to me the other day. It shut off and wouldn't come on. Thankfully I am paying extra for extended warranty which is basically lifetime warranty and got it replaced.
Sent from my Sensation 4G using XDA App

How much did you pay for extended warranty*

Got a email from Htc saying even though my phone is in warranty they want a £145 to fix it put not because of the fault but because at the top of the screen there a little crack and even though I said that's not why its broke they still want me to pay it. So I don't now if its worth paying that much to fix it or count my loss's. Isn't there any other way to fix a bricked phone

Root w/o usb port (wireless adb maybe?)

so, i've been researching this all night and i want to get a straightforward answer. is there any way i can root my S3 without using the USB port? the port is busted and doesn't detect anything being plugged in (i have 3 batteries and an external charger, since it won't charge)
basically, i'm coming across some posts from the S2 explaining that you could root that one by simply flashing some SU files etc in recovery:
http://forum.xda-developers.com/showthread.php?t=1746794
can any of this be done with the S3? i was looking into wireless ADB as well, but you def. need root for that, despite the fact i also found someone on the S2 forums who apparnetly had wireless ADB working without root:
http://forum.xda-developers.com/showthread.php?t=1371326
i have no idea how he did it, because i def can't.
any thoughts? i'd love to root this thing and just keep it stock (just delete bloatware and make tweaks to stop the launcher redraw) and that's it..not even looking to throw custom roms on it yet.

Honestly I think you are SOL for the time being

well that's not good cmon con, i know you can figure something out lol
Sent from my Samsung Galaxy S3 using Tapatalk 2

I was able to root by flashing an SU zip in CWM. However I was only able to flash CWM thanks to Casual. It wouldn't root me. But did let me install cWM. From there I booted into recovery and was rooted in seconds. With no USB though that makes things tricky. Not sure how you could get CWM on there then. I was able to root my Droid x purely using terminal emulator on the phone and pushing files from the SD card. But that was years ago and i think rooting is a bit different now since it looks like it gets symlinked.
--Sent from GlaDos baked potato

Port death by tit sweat.

jayochs said:
so, i've been researching this all night and i want to get a straightforward answer. is there any way i can root my S3 without using the USB port? the port is busted and doesn't detect anything being plugged in (i have 3 batteries and an external charger, since it won't charge)
basically, i'm coming across some posts from the S2 explaining that you could root that one by simply flashing some SU files etc in recovery:
http://forum.xda-developers.com/showthread.php?t=1746794
can any of this be done with the S3? i was looking into wireless ADB as well, but you def. need root for that, despite the fact i also found someone on the S2 forums who apparnetly had wireless ADB working without root:
http://forum.xda-developers.com/showthread.php?t=1371326
i have no idea how he did it, because i def can't.
any thoughts? i'd love to root this thing and just keep it stock (just delete bloatware and make tweaks to stop the launcher redraw) and that's it..not even looking to throw custom roms on it yet.
Click to expand...
Click to collapse
Why don't you just get the phone replace as it is obviously defective?

First remove your battery and you may try to clean your usb plug on your phone by take a toothpick, needle etc.. and wrap a little piece of paper towel around it, soak with Windex or alcohol and scrub all the pins inside of the USB. This works wonder! second recommendation is to try another usb cable. Good luck.

piiman said:
Why don't you just get the phone replace as it is obviously defective?
Click to expand...
Click to collapse
I think he got it from a third party.
Synergized GS3

piiman said:
Why don't you just get the phone replace as it is obviously defective?
Click to expand...
Click to collapse
Cause it has physical damage.

zetsumeikuro said:
Cause it has physical damage.
Click to expand...
Click to collapse
Samsung would still fix it. I wouldn't live with it like that but to each his own

thanks for the responses guys! a few answers:
1.) i literally got this phone for $30 from a customer at my store who ruined it due to said tittysweat. no lie, the woman ran with it in her shirt, and sweat corroded the charge port. i SOMEHWAT fixed it with alch and Deoxit weeks ago, and it would BARELY charge (like maybe half a percent every 3 hours..ridiculous lol) but then after further cleaning, it completely died and doesn't work now.
2.) i've never once had insurance on my lines in all my 16 years with verizon, so i'm not adding it to make a claim, because it's gonna look fishy especially if they see 3 different phones on my acct within weeks
3.) has two TINY cracks in the corners of the phone screen, so i couldn't even get it replaced due to that as well
when i would plug it in when it barely charged, it would go between charging (ac) and just charging. so it was def messed up. i opened up the back to look at it, but i didn't take the entire phone apart yet.
i've got a replacement charge port (was 5 bucks on ebay), problem is i don't have a hot air soldering iron so i can't do it myself and don't have any repair guys near me.
just looking for basic ways to get rooted w/o having the usb port, but it seems to be futile
also for samsung to fix it, the turn around is like 2-4 weeks and i'm sure costs an arm and a leg..whereas i have a few members on here who i could send to and would cost less, and it would take a lot less time than samsung lol

jayochs said:
thanks for the responses guys! a few answers:
1.) i literally got this phone for $30 from a customer at my store who ruined it due to said tittysweat. no lie, the woman ran with it in her shirt, and sweat corroded the charge port. i SOMEHWAT fixed it with alch and Deoxit weeks ago, and it would BARELY charge (like maybe half a percent every 3 hours..ridiculous lol) but then after further cleaning, it completely died and doesn't work now.
2.) i've never once had insurance on my lines in all my 16 years with verizon, so i'm not adding it to make a claim, because it's gonna look fishy especially if they see 3 different phones on my acct within weeks
3.) has two TINY cracks in the corners of the phone screen, so i couldn't even get it replaced due to that as well
when i would plug it in when it barely charged, it would go between charging (ac) and just charging. so it was def messed up. i opened up the back to look at it, but i didn't take the entire phone apart yet.
i've got a replacement charge port (was 5 bucks on ebay), problem is i don't have a hot air soldering iron so i can't do it myself and don't have any repair guys near me.
just looking for basic ways to get rooted w/o having the usb port, but it seems to be futile
also for samsung to fix it, the turn around is like 2-4 weeks and i'm sure costs an arm and a leg..whereas i have a few members on here who i could send to and would cost less, and it would take a lot less time than samsung lol
Click to expand...
Click to collapse
These guys offer USB port repairs on the GNex...I would contact them and see if they are planning on offering that service for the S3. Worth a shot.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-nexus-usb-port-repair/
they can also JTAG bricked phones, sell Jigs to get into download mode etc. Looks like they also offer an unlock and custom rom service which made me lol.
EDIT** was she hot?? lmao

MFD00M said:
These guys offer USB port repairs on the GNex...I would contact them and see if they are planning on offering that service for the S3. Worth a shot.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-nexus-usb-port-repair/
they can also JTAG bricked phones, sell Jigs to get into download mode etc. Looks like they also offer an unlock and custom rom service which made me lol.
EDIT** was she hot?? lmao
Click to expand...
Click to collapse
aahaa that was the most asked question..unfortunately not lol

Isn't there like a mobile Odin program you could use to flash the stock rooted system image? I don't know if that would work or not just a thought.

JBO1018 said:
Isn't there like a mobile Odin program you could use to flash the stock rooted system image? I don't know if that would work or not just a thought.
Click to expand...
Click to collapse
Yeah I saw that but apparently to even use it you need to be rooted..
Sent from my Samsung Galaxy S3 using Tapatalk 2

It's actually Jay's titty sweat. Man boob corrosion!

zetsumeikuro said:
It's actually Jay's titty sweat. Man boob corrosion!
Click to expand...
Click to collapse
listen up, zetsumi mike zero, i can assure you it was feminine t-sweat

Few things

Just yesterday traded my Galaxy S2 for one s (s4) and I really like it for now. Phone came with one problem: usb connector is not so good, so I have to find the "right angle" for charger/ usb to work. Gonna take it to a service these days to get connector changed.
Anyway, I have noticed that it takes a lot of time to charge (when I get it working). Is this normal on this phone or is it related to my problem maybe?
Also, this phone is from Swiss (swisscom operator, sim free, 4.1.1 rom). Is there any stock deodexed jb rom that I can install and is there anything that I should be aware of (like brickbug on samsung phones) ?
Allready got s-off, root and recovery.
Sent from my HTC One S using Tapatalk 2

Flash the ViperOneS rom. It's the best stock sense rom with lot of tweaks!

How long time is long? Mine charges 10-100% in 2-2.5h, sometimes 3h if I use it a bit while its charging.

Well to be honest didn't charged it full yet. Have it for one day and two nights now, first full charge was over night so have no idea how long it took. Yesterday it was on charger for about 30-40 minutes and charged from 45% to 62%. Wi fi and power saver were on
Sent from my HTC One S using Tapatalk 2

Cayman.n2o said:
Just yesterday traded my Galaxy S2 for one s (s4) and I really like it for now. Phone came with one problem: usb connector is not so good, so I have to find the "right angle" for charger/ usb to work. Gonna take it to a service these days to get connector changed.
Anyway, I have noticed that it takes a lot of time to charge (when I get it working). Is this normal on this phone or is it related to my problem maybe?
Also, this phone is from Swiss (swisscom operator, sim free, 4.1.1 rom). Is there any stock deodexed jb rom that I can install and is there anything that I should be aware of (like brickbug on samsung phones) ?
Allready got s-off, root and recovery.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Get a new USB cable. My stock one also became loose. When I use my wife's SG3 USB or son's tablet USB it fits securely.
Sent from my One S using Xparent Skyblue Tapatalk 2

I did, tryed like 5-6 different cables, same thing. Tommorw I'm taking it to service, well see how it goes

So I get my phone issue fixed...somehow. I went to a local service, they oppened my phone to get the connector fixed, and when they oppened the phone we saw it was glued!!!
There was something wrong with the phone and whoever worked on it, they did something that in service told me its called "blowing" the processor. Its some kind of technique that revives a proccessor, getting it to work for a bit longer. Also, when they assembled the phone they use some cheap glue that, due to the heat of the phone, got spilled all over the motherbord which made a short circuit and made the connector, camera flash and touch screen act weird.
After a few hours of raging and yelling, I managed to find the guy who gave me that phone, and he was very correct, I gave him back the phone, and he provided me a never used one s, bought just 10 days ago from a local carrier. I was so happy, but when I got home I found out it's an S3 version :/
So why so much frustration I've decided I dont want to trade phone again and I want to keep it. Its just that I have traded my s2 for one s because I love to try new roms and so, and one s seamed like a more suitable devise for that, but now with s3 version I'm dissapointed...Seam that I'll have to wait.
Just if could get a viperones rom that is for S4 ver I would be verry happy.

If the s4 connecter was fixed, then go get it back. s3 is far inferior. That blowing crap sounds like a load of ****, probably just trying to sell you a new phone.
HTC_One_S | Root_Box | Bubba_Kernel_2.8b | S-OFF

[Q]Return to stock without USB data working

I probably know the answer to this but is there any way to return to stock while not having use of USB data?
Sent from my SGH-I997 using xda app-developers app

I think there's probably a small crowd of people that are looking for this ability. I've not heard of a solution to go back once you lose USB.
Sent from Tapatalk 2.

I know of one but our device isn't supported but it's too use mobile Odin , I think I'm just gonna fix the port via replacing it but I don't have all the tools to do so, I need a small tip for my soldering iron
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Cheap fix
I may be the only one that gets this lucky, but I was having a lot of trouble with my usb port being seen by computer. It got to the point that I had to get the phone ad cable just right to charge. I decided last night I had to do something or replace phone. I powered down phone and squirted lighter fluid in the usb port,then took a toothpick and piece of rag and cleaned best I could. Phone is working great now. All of my cables are charging and being seen by computer.
I was at point of replacing phone anyway,so don't try if your not prepared for failure, but good luck and let me know if you have success with this.

elbscorp said:
I may be the only one that gets this lucky, but I was having a lot of trouble with my usb port being seen by computer. It got to the point that I had to get the phone ad cable just right to charge. I decided last night I had to do something or replace phone. I powered down phone and squirted lighter fluid in the usb port,then took a toothpick and piece of rag and cleaned best I could. Phone is working great now. All of my cables are charging and being seen by computer.
I was at point of replacing phone anyway,so don't try if your not prepared for failure, but good luck and let me know if you have success with this.
Click to expand...
Click to collapse
And so it happens.
I hooked up my phone and made a file transfer and then...usb stopped functioning.
I tried a whole bunch of stuff, thinking it was just the pc or the driver recognition..but no go. Even after pc wipe and reinstall OS and drivers. No luck.
The sad part is that I was on a rooted 2.3.6 but after a wipe, the stock sammy recovery replaced the cwm recovery.
No usb means no return.
I did try to use alcohol, wiped and scrubbed. I even opened the phone and try a few cleanings. Even disassembled
No luck.
I know this is available:
http://forum.xda-developers.com/showpost.php?p=43451544&postcount=6
This seemed more fun though:
http://www.youtube.com/watch?v=Ao5T9_XcCrU
And this is what I have until I get this:
http://www.ebay.com/itm/Lot-3-USB-C...e_Replacement_Parts_Tools&hash=item20cdd2f5ec
attached photos

qkster said:
And so it happens.
I hooked up my phone and made a file transfer and then...usb stopped functioning.
I tried a whole bunch of stuff, thinking it was just the pc or the driver recognition..but no go. Even after pc wipe and reinstall OS and drivers. No luck.
The sad part is that I was on a rooted 2.3.6 but after a wipe, the stock sammy recovery replaced the cwm recovery.
No usb means no return.
I did try to use alcohol, wiped and scrubbed. I even opened the phone and try a few cleanings. Even disassembled
No luck.
I know this is available:
http://forum.xda-developers.com/showpost.php?p=43451544&postcount=6
This seemed more fun though:
http://www.youtube.com/watch?v=Ao5T9_XcCrU
And this is what I have until I get this:
http://www.ebay.com/itm/Lot-3-USB-C...e_Replacement_Parts_Tools&hash=item20cdd2f5ec
attached photos
Click to expand...
Click to collapse
hey let me know how your repair goes, i dont have the tools to do it myself, or i would but if yours goes well, let me know i may ask you to do mine if thats alright with you?
so i just tried to go back to stock via flashing rom via recovery, and lets just say... that didnt go so well, i have no os recovery is borked ... kernel seems fine but no usb data so my infuse if ****ed until i can get the usb fixed

qkster said:
And this is what I have until I get this:
http://www.ebay.com/itm/Lot-3-USB-C...e_Replacement_Parts_Tools&hash=item20cdd2f5ec
Click to expand...
Click to collapse
If you don't want to spend $100+ on a Weller micro-solder setup or on the "professionals" take a look at this item... might fit the bill for the project.
http://www.amazon.com/Coopertools-S...78319450&sr=1-3&keywords=micro+soldering+iron
btw... what's that discoloration on the main circuit board shield? it almost looks like some kind of chemical corrosion took place .... just sayin'

Please keep us informed on how it goes. The naphtha which is a stronger cleaner than alcohol worked for a little while,but I'm starting to have a few cables not read again

Zen Arcade said:
If you don't want to spend $100+ on a Weller micro-solder setup or on the "professionals" take a look at this item... might fit the bill for the project.
http://www.amazon.com/Coopertools-S...78319450&sr=1-3&keywords=micro+soldering+iron
btw... what's that discoloration on the main circuit board shield? it almost looks like some kind of chemical corrosion took place .... just sayin'
Click to expand...
Click to collapse
Ya know..come to think of it, I think that resembles water and chlorine dried up on a metallic surface of PCB board doesn't it? I'm still trying to figure out how that happened.
@deathblade:
I had on old solder iron I bought from Big Lots years ago for about $4-$5.
I filed the point down using a whetstone. You can use a file or just the rough surface like cement, brick, clay or just the bottom of a ceramic plate.
The one Zen suggested looks good.
Here is another inexpensive source:
http://www.harborfreight.com/30-watt-lightweight-soldering-iron-69060.html
Just take your time.
If you never done it before, open an old electronic part and practice.
I'm not an expert at this. I feel comfortable in sacrifice my phone for parts but I don't like the idea of messing up someone else's phone.
It's better if someone else messes up their phone though.
I did buy 10 of the usbs charging port. If it works and you guys need one, hit me up, I mail you one at cost and stamp. (~$1.70ea + stamp)

qkster said:
Ya know..come to think of it, I think that resembles water and chlorine dried up on a metallic surface of PCB board doesn't it? I'm still trying to figure out how that happened.
@deathblade:
I had on old solder iron I bought from Big Lots years ago for about $4-$5.
I filed the point down using a whetstone. You can use a file or just the rough surface like cement, brick, clay or just the bottom of a ceramic plate.
The one Zen suggested looks good.
Here is another inexpensive source:
http://www.harborfreight.com/30-watt-lightweight-soldering-iron-69060.html
Just take your time.
If you never done it before, open an old electronic part and practice.
I'm not an expert at this. I feel comfortable in sacrifice my phone for parts but I don't like the idea of messing up someone else's phone.
It's better if someone else messes up their phone though.
I did buy 10 of the usbs charging port. If it works and you guys need one, hit me up, I mail you one at cost and stamp. (~$1.70ea + stamp)
Click to expand...
Click to collapse
The, I understand where your coming from I do have some experience with soldering but not as much as I'd like I to however have plenty experience with replacing non soldered hardware, and do to past events I don't have any old devices to practice on, I might take you up on that offer for the part, though I wouldn't know how much the stamp would be, as I never mailed anything before, you wouldn't happen to also have any spare power buttons would you? Lol my Cappy's doesn't work, tried to reset the solder as I've heard that might help but instead it turned everything displayed on the screen blue for a while <<<weird lol
Sent from my SGH-I747 using xda app-developers app

deathblade said:
The, I understand where your coming from I do have some experience with soldering but not as much as I'd like I to however have plenty experience with replacing non soldered hardware, and do to past events I don't have any old devices to practice on, I might take you up on that offer for the part, though I wouldn't know how much the stamp would be, as I never mailed anything before, you wouldn't happen to also have any spare power buttons would you? Lol my Cappy's doesn't work, tried to reset the solder as I've heard that might help but instead it turned everything displayed on the screen blue for a while <<<weird lol
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
us stamp is $.46 -first class - 1oz
I havent had any issue with the power button yet so i dont have any spare on hand.
i saw them on ebay though
http://www.ebay.com/itm/5x-POWER-SW...e_Replacement_Parts_Tools&hash=item19e04d52f9
works out to be about $3/ea
i'll have the ports..you'll the buttons..we can trade.

qkster said:
us stamp is $.46 -first class - 1oz
I havent had any issue with the power button yet so i dont have any spare on hand.
i saw them on ebay though
http://www.ebay.com/itm/5x-POWER-SW...e_Replacement_Parts_Tools&hash=item19e04d52f9
works out to be about $3/ea
i'll have the ports..you'll the buttons..we can trade.
Click to expand...
Click to collapse
Lol we shall be the peripheral supply
Sent from my SGH-I747 using xda app-developers app

I just found this http://www.multi-com.pl/index.php/en_US,details,id_pr,8831,menu_mode,categories.html sounds like it would really help
Sent from my SGH-I747 using xda app-developers app

deathblade said:
I just found this http://www.multi-com.pl/index.php/en_US,details,id_pr,8831,menu_mode,categories.html sounds like it would really help
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
yeah. I recalled that. but you need that board and the riff box and others. not feasible for one infuse unless you are planning a side line business of jtagging infuses.
for the cost of that setup, you could buy 2 working infuses or a later phone model

elbscorp said:
Please keep us informed on how it goes. The naphtha which is a stronger cleaner than alcohol worked for a little while,but I'm starting to have a few cables not read again
Click to expand...
Click to collapse
I had severed the 7 pins with an exacto blade.
de-soldered the points
cleaned up the points
socketed in the new port
seems to fit
soldered in the new port.
slightly sloppy but seated well
re-assembled.
no reading or charge
I think it's due to poor new pin/old pin contacts.
prolly could have used better equipments or techniques
I left the new port in place and prolly will just send it to the mobiletech guys
i have 9 brand new ports available.

Just an update guys...
I soldered the new port on. My first attempt. Kinda sloppy actually. I wasn't able to clean off the old materials very well as I had concern about over heating the board. I think having the correct materials, solders, flux, magnifiers, and heat shield cloth and such may help. My attempt did not work. I suspect I was not able to get the 7pins to touch or connect properly.
I sent mine to mobiletechvideo without the port.
It's about 10 days turn around. It came back working. I was not expecting it to boot up and was ready to flash it back to stock myself but it came back with the leaked GB KK4 firmware installed. Kinda odd I guess as most of the return to stock on XDA were either UCKE3, UCKJ4 or UCLB3.
Although when I have the Infuse on the data cord at an angle that stress the connection, the computer reports the device as unknown. I suspect it is not as good as factory ship but good enough for me to restore the phone to function.
I'll have to keep an eye on the connection for now.
Conclusion: it can be done..but better success if you have the proper equipment for micro welding.

Glad to hear it's working
Sent from my SAMSUNG-SGH-I747 using xda app-developers app