Hi to all develpoers out there,
I got a problem with Froyo and Wifi on my polaris.
When I activate Wifi Andriod says ERROR.
I don´t know where is comming from.
Bluetooth is working.
Is there a method to get a more detailed message or stack strace?
Might it solve the problem if I install RLS13 or an older nhb?
Allready done:
Fix Permissions (no Quit, reset after menu is displayed again)
Actual permissions:
-rwxr-xr-x 0 0 loadit
-rwxr-xr-x 0 0 wlan_loader
Additional Information:
Pamel Type: 3
FroYo RS 14: Incubus26Jc's Super FroYo RLS14 All Languages
NHB: polaimg-panel3-240x320-2.6.32-froyo-27-08-10_23.nhb
Thanks for all info. Post if need more detailed info from me.
Saberex
Saberex said:
Hi to all develpoers out there,
I got a problem with Froyo and Wifi on my polaris.
When I activate Wifi Andriod says ERROR.
I don´t know where is comming from.
Bluetooth is working.
Click to expand...
Click to collapse
see post http://forum.xda-developers.com/showpost.php?p=7876815&postcount=152
Who can I repace the existing file?
Thanks for this really fast reply.
Right now I am trying to copy the new wlan.ko into the folder mentioned.
Due to the fact that the file is existing I get errors even with su.
cp /sdcard/fixes/wlan.ko /system/lib/modules
says file is allready existing
rm -f /system/lib/modules/wlan.ko
says only read access.
Saberex
It works perfect form me with
kalt_kaffe nbh:
1. Get incubus file and copy to Andboot.
2. Get kalt_kaffe nbh panel1 in pola100
3. Patch it with nbh editor 4.0 (install phyton first as explains the nbh editor post)
4. Flash it from Windows
5. Use dpad to enter menu and install to nand (option 1)
6. Wait until it installs. No other files needed (only 2 files). Good luck.
WiFi, camera, market, bt ... all works pretty well and imported 500 contacts...Andy resets well
Sent from my Full Android on Polaris using XDA App
Use this update
Thanks for your solutions
Thanks to all of you.
I solved the problem the old fashion way. I haven´t installed anything, so I patched the wlan file inside the archive and redeployed it.
The update I found in the forum started an endless loop displaying the Android logo.
Thanks for your fast help.
hi, I am facing the same problem, can you please share the ptached file? or tell me how to patch a file?
> patched the wlan file inside the archive
Do it on computer (not in the telephone):
1) open "androidinstall.tgz" in an archiver
2) go to "/system/lib/modules/"
3) delete inside archive "wlan.ko"
4) pack there (i.e. in "/system/lib/modules/" folder of archive) previous version of
"wlan.ko"
5) Flash patched androidinstall.tgz as usual
I did it successfully yesterday after found the same WIFI behaviour in
Incubus26jc's Super Froyo RLS16.
I took "wlan.ko" from Incubus26Jc's Super FroYo RLS13.
After patching WIFI in RLS16 works correct.
05DC said:
> patched the wlan file inside the archive
Do it on computer (not in the telephone):
1) open "androidinstall.tgz" in an archiver
2) go to "/system/lib/modules/"
3) delete inside archive "wlan.ko"
4) pack there (i.e. in "/system/lib/modules/" folder of archive) previous version of
"wlan.ko"
5) Flash patched androidinstall.tgz as usual
I did it successfully yesterday after found the same WIFI behaviour in
Incubus26jc's Super Froyo RLS16.
I took "wlan.ko" from Incubus26Jc's Super FroYo RLS13.
After patching WIFI in RLS16 works correct.
Click to expand...
Click to collapse
Can you give us your RLS16 working ?
can someone give me a working RLS 16 with WIFI?
i tried to make like you told me up but gave me an error. Unable to open persistent property directory /data/peroperty errno: 2
you did a mess because it doesn't mount data dir:
Code:
Unable to open persistent property directory /data/peroperty errno: 2
Reinstall all.
Need help tethering G Tablet to Moto Droid 1
OK, I have tried everything to get this to work. I have tried TnT gapps patch in boot recovery and side loading and no go.
I have tried editing wpa_supplicant file in wifi folder both manually and with a mod that used g script as a toggler between infrastructue and ad hoc, no go.
Droid will ad hoc to Apple iPod and iPad and laptop running Windows XP with no problems, just can't figure out how to get the Droid 1 and G Tablet to ad hoc and also want it to ad hoc and connect to my router in infrastructure mode. G Tablet does connect to infrastructure router with no problem.
G Tablet and Droid 1 are both rooted. I am using Root Explorer to edit G Tablet. I am using Wireless Tether on the Droid 1. I have tried Barnacle too. Nothing works to get the two to link together.
I want to continue to use the stock UI on the G Tablet.
Here is device specs:
G Tablet: Stock UI rooted
Android OS Ver. 2.2
Tap UI Ver. 1.1-3389
Kernel Ver. 2.6.32.9-00000-10.8.2-dirty
hudson(at)tapntapsvn
Build Num. FRF91
Droid 1: Stock rooted
Android Ver. 2.2.1
Baseband Ver. C_01.43.01P
Kernel Ver. 2.6.32.9-g68eeef5
android-build(at)apa26 #1
Build Num. FRG3D
(Parenthesese around (at) in Kernel Ver. due to new user rules about links)
I have been at this for days and can't figure it out. If someone has a true step by step or can offer any help to get this going it would be greatly appreciated.
Thank you in advance,
Brian
install the 3389 performance pack. This fixes adhoc and installs gapps.
http://forum.xda-developers.com/showthread.php?t=885940&highlight=wpa
Read this to understand standard recovery if you dont have clockwork recovery
http://forum.xda-developers.com/showthread.php?t=892090
Read this to install the right clockwork if you want to make your life easier.
http://forum.xda-developers.com/showthread.php?t=865245
The first post of each thread explains everything. The biggest reason to flash clockwork recovery is to repartition your sdcard to avoid problems later. There are a couple of known issues with the stock TnT 3389.
The tab seems to get stuck at a low cpu speed when waking from sleep. It takes a reboot to fix this. You can flash a custom kernel to fix this.
The tab will delete your media files from your external sdcard if you don't put an empty file named ".nomedia" in whatever folder your media files are in.
Well so much for that. I installed the enhancement pack and now have zero conectivity and don't know what to fix now. At least with all of the other mods it was easy to back out of.
WTF!!! I am about ready to take it to the shop and run it through the table saw.
How do I recover it now???
P.S. I read all of those threads you posted before I posted. I tried to install the generic one before but not the enhanced one. How do I recover it???
Read the update.zip thread I linked.
Install clockwork and install the 3389 update stock rom. Wipe data/cache
If you don't want to install clockwork then download the 3389 update and the clockwork 0.8 zip.
Unzip clockwork 0.8 zip to the root of a micro sdcard
Delete the update.zip file
Open the recovery folder
Open the command file in the recovery folder
Make sure the line has "SDCARD2" and NOT "SDCARD"
You can edit it. Make sure if you do it doesn't add a .txt extension to it
Rename the 3389 update zip file to "update.zip" and place that on the root of the micro sdcard
Insert micro sdcard in the tablet
Boot the tablet holding the Power/Vol+
Hold the Vol+ until you see " Recovery key pressed"
Let it install and reboot and you should be back to stock.
Install the performance pack the same way.
If you install clockwork recovery you don't need the recovery command file to flash roms. I can't recommend strongly enough to install clockwork recovery to do this and to wipe data/cache
I think your problem has a very simple solution because I have had this problem after the wifi teather app recently updated all I had to do is go into the wifi feather app and select a channel I choose channel 11. Then I went into settings on the tablet and wifi network I pressed menu advanced and choose channel 11 also this fixed my issues hopefully it will fix yours I too use a Motorola Droid 1 and a G Tablet my tab is on vegan5.1 with pershoots latest kernal my D1running the latest bugless beast with jdlfg 1125 Kernel
I was able to install clockwork mod so far but I am still working on getting the enhancement to load. It aborts install. I will try to re download it.
Neither enhancement works. Clockwork mod works, it starts to load the fine then quits with a prompt, (bad) cannot load file. 3389 and 3452 both come up bad. I re downloaded both several times form all of the sites still hosting it. Some of the sites had the file removed.
Why is this not working? I followed it to a tee. Same procedure as installing clockwork mod. Command file is formatted correctly and directs to the proper folders and drive. (SDCARD) I also cleared the cache and did a backup.
Any other suggestions? Thanks for the help so far. It at least installed clockwork mod. I did at least figure out how to return the wifi settings to allow infrastructure to work. Every time I try to install this it skews the file and permissions. I can at least return it so it is still useable but would really like to get the ad hoc to work.
I also tried WPA, no encryption, changing channels, changing IP addresses, and just about every other setting on this.
Tablet has original OTA update from 12/25/10 then rooted.
Once clockwork is installed you no longer need the recovery/command. Make sure the 3389 performance pack is a .zip and not a .rar. If it is .rar then you need to "unrar" it.
Place it on the internal sdcard and select it in the clockwork recovery menu. Don't use Rom Manager.
None of this is working. Error comes up:
E:Can't open /sdcard/update.zip
(bad)
Installation aborted
I have tried to re download the files, I have just renamed them, I have pasted them into an already labeled zip folder, nither option works.
I use the manual install on CWMod so I know I am choosing the correct file andf it just says that it is bad.
Is it possible that the download file is no good? When you said to "unrar" it is that simply changing the file name or is it copying to another folder or extracting the file??? If the file is bad then I am just going in circles but if I am doing something wrong (which I don't think so) then I am missing something.
After a reboot I need to go into the wifi folder to open permissions for the wifi to connect again and then it will connect to my router but not the droid.
Brian Oshman said:
None of this is working. Error comes up:
E:Can't open /sdcard/update.zip
(bad)
Installation aborted
I have tried to re download the files, I have just renamed them, I have pasted them into an already labeled zip folder, nither option works.
I use the manual install on CWMod so I know I am choosing the correct file andf it just says that it is bad.
Is it possible that the download file is no good? When you said to "unrar" it is that simply changing the file name or is it copying to another folder or extracting the file??? If the file is bad then I am just going in circles but if I am doing something wrong (which I don't think so) then I am missing something.
After a reboot I need to go into the wifi folder to open permissions for the wifi to connect again and then it will connect to my router but not the droid.
Click to expand...
Click to collapse
I dunno if this will help but i remember on my droid it never liked working with a files named update.zip in cwm.. change the name of the file and then apply it
"rar" is another file compression like zip. On windows download 7zip. It will allow you to "unrar" ie "unzip" the file. I just checked and the performance pack is a .rar file. You can't rename it to .zip. You must extract it using the unrar file extraction tool. There will be a .zip inside that that you can flash
That was it!!!! Thanks for all of your help and for replying. The 7zip did the trick. I was unaware that the zip format was different.
Very cool. Works on Droid 1 wireless tether.
if the files you are downloading are in RAR format, you cannot simply rename them to ZIP. You will need to use a WinZip, 7Zip, or some other utility to extract the update.zip file from the file you downloaded.
Once you have extracted update.zip to your PC, you can then connect your g tablet via USB and connect that way. Copy update.zip to the folder of your choice and then reboot into cwm to install the update.
Ok, the new flash works, ad hoc now works and it added the market and the stock android camera and some other things. Here is the new issue and I will just continue in this thread since one relates to the uprade of another.
After the upgrade, the internal camera will take pics an are viewable in the "gallery" but any jpg loaded into the tablet via usb or e mail are not visible. He gallery shows a blank thumbnail and opens blank file as i the image was there but no actual pkc. I saved the pic in DCIM, camera, thumbnails, andro, sdcard, etc... and the gallery will pick up all of these files but displays blank thumbnails and blank photos.
I realize that th original camera and viewer were different than the android camera and gallery. Th problem is that I want to be able to view e mailed photos and imported photos like it used to. As I said it does store and view pics taken with the internal camera but that is not of real importance here but a fix woud probably fix all of it.
Anybody have a patch or fix for that that would not undo any of the other changes? Also, a patch to usb tether a droid or other mass storage device?
Thanks in advance.
You can attach a fat32 external HD to the Gtab. The externally powered ones seem to work more consistantly.
thebadfrog said:
You can attach a fat32 external HD to the Gtab. The externally powered ones seem to work more consistantly.
Click to expand...
Click to collapse
Thanks.
Anyone got a fix for the gallery problem?
Brian Oshman said:
Thanks.
Anyone got a fix for the gallery problem?
Click to expand...
Click to collapse
Never mind. I figured it out. Thanks.
I have rooted both my Samsung Replenish and my Acer A500, installed the Wifi Tether AND the Wireless Tether apps, tried both, but my A500 did not recognize them at all.
So, in rooting around I found this thread: http://forum.xda-developers.com/showthread.php?t=1033314
Which has a modified wpa_supplicant file.
I downloaded it,
turned off wifi,
unzipped it,
and using Root Explorer, renamed the old wpa_supplicant in the /system/bin/ folder,
then copied the modified wpa_supplicant to that same folder,
changed the permissions on the modified file to 755 (rwxr-xr-x),
rebooted my A500,
re-enabled wifi, and there it was.
I was able to connect and browse just fine.
There is another modified wpa_supplicant file that you can dl and try (I have not): http://www.android.net/forum/downloads.php?do=file&id=40
[REQ] please post wpa_supplicant file from transformer
I am trying to find a copy of the wpa_supplicant file from the transformer to see if it will work on the xoom. My xoom by default doesn't show or connect to ad-hoc networks but with a modified wpa _supplicant file it can. I noticed that a stock transformer could connect to my ad-hoc network so I want to try it on my xoom.
All you need is to be rooted and have a file manager that can remount system files. Root explorer is my favorite but if you don't have it or don't want to buy it es file explorer will work for free. Navigate to system/bin and copy the wpa_supplicant and post it back to this thread. Pretty easy... Thanks in advance.
This is not development
thebadfrog said:
This is not development
Click to expand...
Click to collapse
It absolutely is.
I am developing a mod to add ad-hoc connectivity to the xoom. I just don't have the source file from the transformer.
mr_wrong_0 said:
It absolutely is.
I am developing a mod to add ad-hoc connectivity to the xoom. I just don't have the source file from the transformer.
Click to expand...
Click to collapse
This is not development for the Asus Transformer. Therefore it should be in Q&A. Moving there.
Hello there, I am new here and I am not able to post directly in the right post, so I will start from here as instructed.
I flashed my OP3 with cm-13.0-20160823-UNOFFICIAL-PureCM-oneplus3 because the stock ROMs 3.2.6 and 3.2.7 don't work with 2 important tools I use very often. These tools are Drivedroid and Airdroid airmirror function, both essential in my opinion. So, I installed PureCM and I love it, ran into some issues but after two clean installations I was able to get rid of them, one was no home or fingerprint sensor at all and the other one was push for Blue mail not working.
The only thing that I don't see on my phone or any post is how to enable OTG. I read on the main thread that the development on this has stopped, but I see nightly updates coming in. Anybody out there using PureCM with OP3 with OTG enabled?
Move .xml file to /system/etc/permissions.
Set permissions to rw -r -r
Reboot!
If u can't download the XML file then download from
https://drive.google.com/open?id=0B4...3NrYUd2akxzT2s
raymond_bqg said:
Move .xml file to /system/etc/permissions.
Set permissions to rw -r -r
Reboot!
If u can't download the XML file then download from
ttps://drive.google.com/open?id=0B4...3NrYUd2akxzT2s[/url]
Click to expand...
Click to collapse
Hi, I found this file already on my folder. I believe that you were maybe trying to help me with Oxygen OS and the USB host issue in drivedroid.......? Thank you, but I am not on Oxygen anymore, I am using PureCM and I am trying to find an option to enable OTG on it.