Hi to all develpoers out there,
I got a problem with Froyo and Wifi on my polaris.
When I activate Wifi Andriod says ERROR.
I don´t know where is comming from.
Bluetooth is working.
Is there a method to get a more detailed message or stack strace?
Might it solve the problem if I install RLS13 or an older nhb?
Allready done:
Fix Permissions (no Quit, reset after menu is displayed again)
Actual permissions:
-rwxr-xr-x 0 0 loadit
-rwxr-xr-x 0 0 wlan_loader
Additional Information:
Pamel Type: 3
FroYo RS 14: Incubus26Jc's Super FroYo RLS14 All Languages
NHB: polaimg-panel3-240x320-2.6.32-froyo-27-08-10_23.nhb
Thanks for all info. Post if need more detailed info from me.
Saberex
Saberex said:
Hi to all develpoers out there,
I got a problem with Froyo and Wifi on my polaris.
When I activate Wifi Andriod says ERROR.
I don´t know where is comming from.
Bluetooth is working.
Click to expand...
Click to collapse
see post http://forum.xda-developers.com/showpost.php?p=7876815&postcount=152
Who can I repace the existing file?
Thanks for this really fast reply.
Right now I am trying to copy the new wlan.ko into the folder mentioned.
Due to the fact that the file is existing I get errors even with su.
cp /sdcard/fixes/wlan.ko /system/lib/modules
says file is allready existing
rm -f /system/lib/modules/wlan.ko
says only read access.
Saberex
It works perfect form me with
kalt_kaffe nbh:
1. Get incubus file and copy to Andboot.
2. Get kalt_kaffe nbh panel1 in pola100
3. Patch it with nbh editor 4.0 (install phyton first as explains the nbh editor post)
4. Flash it from Windows
5. Use dpad to enter menu and install to nand (option 1)
6. Wait until it installs. No other files needed (only 2 files). Good luck.
WiFi, camera, market, bt ... all works pretty well and imported 500 contacts...Andy resets well
Sent from my Full Android on Polaris using XDA App
Use this update
Thanks for your solutions
Thanks to all of you.
I solved the problem the old fashion way. I haven´t installed anything, so I patched the wlan file inside the archive and redeployed it.
The update I found in the forum started an endless loop displaying the Android logo.
Thanks for your fast help.
hi, I am facing the same problem, can you please share the ptached file? or tell me how to patch a file?
> patched the wlan file inside the archive
Do it on computer (not in the telephone):
1) open "androidinstall.tgz" in an archiver
2) go to "/system/lib/modules/"
3) delete inside archive "wlan.ko"
4) pack there (i.e. in "/system/lib/modules/" folder of archive) previous version of
"wlan.ko"
5) Flash patched androidinstall.tgz as usual
I did it successfully yesterday after found the same WIFI behaviour in
Incubus26jc's Super Froyo RLS16.
I took "wlan.ko" from Incubus26Jc's Super FroYo RLS13.
After patching WIFI in RLS16 works correct.
05DC said:
> patched the wlan file inside the archive
Do it on computer (not in the telephone):
1) open "androidinstall.tgz" in an archiver
2) go to "/system/lib/modules/"
3) delete inside archive "wlan.ko"
4) pack there (i.e. in "/system/lib/modules/" folder of archive) previous version of
"wlan.ko"
5) Flash patched androidinstall.tgz as usual
I did it successfully yesterday after found the same WIFI behaviour in
Incubus26jc's Super Froyo RLS16.
I took "wlan.ko" from Incubus26Jc's Super FroYo RLS13.
After patching WIFI in RLS16 works correct.
Click to expand...
Click to collapse
Can you give us your RLS16 working ?
can someone give me a working RLS 16 with WIFI?
i tried to make like you told me up but gave me an error. Unable to open persistent property directory /data/peroperty errno: 2
you did a mess because it doesn't mount data dir:
Code:
Unable to open persistent property directory /data/peroperty errno: 2
Reinstall all.
Related
Download this than follow instructions
http://forum.xda-developers.com/attachment.php?attachmentid=333033&d=1274945942
Via root explorer :
-dl file
-put file in SD
-forceatop market from settings > applications
-use root explorer to look for file.
-make sure file name is vending_preferences.xml (no .txt) if not rename.
-copy file
-using RE go to data > data > com.android.vending > shared_prefs
-paste vending_preferences.xml (over writing the one you have)
-forcestop market again if you have to.
Via adb
-dl file
-make sure file name doesn't have .txt
-forcestop market
-adb remount
-adb push vending_preferences.xml /data/data/com.android.vending/shared_prefs/
-forcestop market again if you have to
And now paid apps should show works on the New Froyo Builds by Herver too
Edit: Doesnt work for CM but works on every other rom
didnt work here
same followed it to the letter
what rom are you'll using and what problems did you have?
Will this work in CM6?
I compared your new file to the file already on my phone with CM6 and, aside from the timestamps, it was identical.
nick8197 said:
what rom are you'll using and what problems did you have?
Click to expand...
Click to collapse
Cm6 N7 did not work
Has anyone tested this on tonight's CM nightly?
TheBiles said:
Has anyone tested this on tonight's CM nightly?
Click to expand...
Click to collapse
didnt work last nights dont think it would work in new one
Cm6 N7 did not work
[NEW GAPPS.ZIP & APK] New Android Market [2.2.6] for G1(Android 2.1&2.2)[16/12/2010]
EDIT: I've put the new gapps.zip to update all ur gapps . This has to work : ) Just flash this from the recovery . It'll overwrite your old gapps , giving you the latest of all the basic gapps (incl.the new Market )
You can then go to the new market and install the updated Gmail,Voice Search,Google Search,Maps,Youtube app etc.
New Android Market (version 2.2.6) features include:
1.Refund window changing to 15 minutes
2.New carousel with featured apps on main page
3.Widgets and Live Wallpapers categories added
4.Related content added to app page
5.Single page app viewing, all info in one place
6.Max size for apk files increased from 25 MB to 50 MB
Also the Downloads now get paused instead of getting cancelled if there is a network/data interruption
I am not making a flashable update since it might clash with the original Vending.apk . So here are the steps to remove the old market and install the new one.
1) Use adb to remove and install the new market.
a) adb remount
b)Backup your current Market by
adb pull /system/app/Vending.apk Vending.apk
c) adb shell rm /system/app/Vending.apk
Rename the apk you downloaded (MAKE SURE YOU DOWNLOAD THE RIGHT APK FOR ECLAIRS OR FROYO) to Market.apk and put the apk in the Android SDK/tools folder then
adb push Market.apk /system/app
OR
Simply use your favourite Root File Manager (Root Explorer ,SU explorer , Android Commander etc.) and go to /system/app and delete Vending.apk .
Then put the New Market apk in /system/app
Restart your phone and you're good to go
Credits : CyanogenMOD.
P.S: I'm not a regular thread creator so kindly move the thread if the section is wrong . Thanks
ENJOY !
Thank you for this update
force close on android 2.2.1 with the froyo one.
which one you have used yourself?
Got this already ...workign on my G1 2.2.1
awesome update for the market...
irisiris said:
force close on android 2.2.1 with the froyo one.
which one you have used yourself?
Click to expand...
Click to collapse
I have SparksMOD . It should work on all CM 6.1 (Android 2.2.1) and all Froyo ROMS.
Make sure you restart your phone and follow my instructions carefully.
Also try running fix permissions from recovery incase it doesnt help.
try to install this through file manager, and it says insufficient permission, can u make a zip file?
badboy68 said:
try to install this through file manager, and it says insufficient permission, can u make a zip file?
Click to expand...
Click to collapse
You cannot replace or manage Android phone system files through normal File managers like Astro,Linda etc.
Best way I recommend is to Use Android Commander and follow the steps for installing without adb commands.
http://androidcommander.com/
i installed thru recovery and works great
on my G1 with 6.1 2708 is great. install via adb
why I do not see the category widgets and live wallpaper?
Hey..
Pity, it doesn't work for me.
I did it with the Root Explorer. Installation suceeded but i get a "force close" error message, when i try to select a program from the list or to go to "my downloads".
Changing back to the old one without problems.
my device:
G1 white
Android FroYo (CM 6.1)
Country: Austria
Cheers!
I used the qr code/barcode scanner in the following link and followed the on-screen instructions. Took it a few minutes but it worked and I have no errors.
Tmobile G1
EZterry 14mb radio/spl
Mytouch3g OTA 2.2.1 updated
Here is the link with the QR code, just use your favorite QR scanner and then open via url or open in browser. It should then start a download, after its done just follow the on screen directions to install (it back-up's the installed markets user data then deletes it and installs the new market. http : // androidspin . com / 2010 / 12 / 11 / new-android-market-update-unofficially-available-for-download/
This isnt spam but I am new so I apparently can not post links, just remove the spaces then copy/paste
Universal Android Market updater v2.2.6
I've posted a new flashable updater
Here is what's new :
Backup original Vending.apk to sdcard
Select between Froyo or pre-Froyo rom
Thread : here
Download : here
woernsn said:
Hey..
Pity, it doesn't work for me.
I did it with the Root Explorer. Installation suceeded but i get a "force close" error message, when i try to select a program from the list or to go to "my downloads".
Changing back to the old one without problems.
my device:
G1 white
Android FroYo (CM 6.1)
Country: Austria
Cheers!
Click to expand...
Click to collapse
Did you rename the file to Vending.apk and change permission? work for me..
I installed with no problem on my MT3G just downloaded it and installed, running froyo 2.2.1
Sent from my T-Mobile myTouch 3G using XDA App
XmeccaX said:
I installed with no problem on my MT3G just downloaded it and installed, running froyo 2.2.1
Sent from my T-Mobile myTouch 3G using XDA App
Click to expand...
Click to collapse
through recovery?
http://androidspin.com/2010/11/11/new-android-market-update-unofficially-available-for-download/
this is the screen i get
badboy68 said:
through recovery?
Click to expand...
Click to collapse
No I installed it the normal way, thru the installer, it took about 2-3 minutes to open for the first time, but no I didn't need to go thru adb or recovery or root explorer
Sent from my T-Mobile myTouch 3G using XDA App
HellRazorGod said:
New Android Market (version 2.2.6) features include:
1.Refund window changing to 15 minutes
2.New carousel with featured apps on main page
3.Widgets and Live Wallpapers categories added
4.Related content added to app page
5.Single page app viewing, all info in one place
6.Max size for apk files increased from 25 MB to 50 MB
Also the Downloads now get paused instead of getting cancelled if there is a network/data interruption
I am not making a flashable update since it might clash with the original Vending.apk . So here are the steps to remove the old market and install the new one.
1) Use adb to remove and install the new market.
a) adb remount
b)Backup your current Market by
adb pull /system/app/Vending.apk Vending.apk
c) adb shell rm /system/app/Vending.apk
Rename the apk you downloaded (MAKE SURE YOU DOWNLOAD THE RIGHT APK FOR ECLAIRS OR FROYO) to Market.apk and put the apk in the Android SDK/tools folder then
adb push Market.apk /system/app
OR
Simply use your favourite Root File Manager (Root Explorer ,SU explorer , Android Commander etc.) and go to /system/app and delete Vending.apk .
Then put the New Market apk in /system/app
Restart your phone and you're good to go
P.S: I'm not a regular thread creator so kindly move the thread if the section is wrong . Thanks
ENJOY !
Click to expand...
Click to collapse
Please delete thread, there's already a thread for this, see http://forum.xda-developers.com/showthread.php?t=871585
Hello HellRazorGod. I have a G1. And I just got it rooted with Cyanogen 2.2 Froyo ROM. But then as you know, cyanogenMod doesn't come with google apps anymore. And then so I tried your android market maybe it will work. And before I downloaded yours, I found many market apk files from other source. But then it still wound't work. But when I tried yours. Still didn't work. I tried AndroidCommander. Adb and still with the same results. I open it, and it is just all white, and after about 5 seconds go back to desktop screen. I tried every possible way. And tried all your steps. Even with the AndroidCommander. Can you help me out? I have a Android 2.2 Froyo Cyanogen 6.1.0 DS ROM. Would really appreciate it.
fart23 did you download the gapps .zip file and then flash it after you flashed your rom. if not then you need to go check out cyanogens wiki how to root/install cyanogen rom.
Need help tethering G Tablet to Moto Droid 1
OK, I have tried everything to get this to work. I have tried TnT gapps patch in boot recovery and side loading and no go.
I have tried editing wpa_supplicant file in wifi folder both manually and with a mod that used g script as a toggler between infrastructue and ad hoc, no go.
Droid will ad hoc to Apple iPod and iPad and laptop running Windows XP with no problems, just can't figure out how to get the Droid 1 and G Tablet to ad hoc and also want it to ad hoc and connect to my router in infrastructure mode. G Tablet does connect to infrastructure router with no problem.
G Tablet and Droid 1 are both rooted. I am using Root Explorer to edit G Tablet. I am using Wireless Tether on the Droid 1. I have tried Barnacle too. Nothing works to get the two to link together.
I want to continue to use the stock UI on the G Tablet.
Here is device specs:
G Tablet: Stock UI rooted
Android OS Ver. 2.2
Tap UI Ver. 1.1-3389
Kernel Ver. 2.6.32.9-00000-10.8.2-dirty
hudson(at)tapntapsvn
Build Num. FRF91
Droid 1: Stock rooted
Android Ver. 2.2.1
Baseband Ver. C_01.43.01P
Kernel Ver. 2.6.32.9-g68eeef5
android-build(at)apa26 #1
Build Num. FRG3D
(Parenthesese around (at) in Kernel Ver. due to new user rules about links)
I have been at this for days and can't figure it out. If someone has a true step by step or can offer any help to get this going it would be greatly appreciated.
Thank you in advance,
Brian
install the 3389 performance pack. This fixes adhoc and installs gapps.
http://forum.xda-developers.com/showthread.php?t=885940&highlight=wpa
Read this to understand standard recovery if you dont have clockwork recovery
http://forum.xda-developers.com/showthread.php?t=892090
Read this to install the right clockwork if you want to make your life easier.
http://forum.xda-developers.com/showthread.php?t=865245
The first post of each thread explains everything. The biggest reason to flash clockwork recovery is to repartition your sdcard to avoid problems later. There are a couple of known issues with the stock TnT 3389.
The tab seems to get stuck at a low cpu speed when waking from sleep. It takes a reboot to fix this. You can flash a custom kernel to fix this.
The tab will delete your media files from your external sdcard if you don't put an empty file named ".nomedia" in whatever folder your media files are in.
Well so much for that. I installed the enhancement pack and now have zero conectivity and don't know what to fix now. At least with all of the other mods it was easy to back out of.
WTF!!! I am about ready to take it to the shop and run it through the table saw.
How do I recover it now???
P.S. I read all of those threads you posted before I posted. I tried to install the generic one before but not the enhanced one. How do I recover it???
Read the update.zip thread I linked.
Install clockwork and install the 3389 update stock rom. Wipe data/cache
If you don't want to install clockwork then download the 3389 update and the clockwork 0.8 zip.
Unzip clockwork 0.8 zip to the root of a micro sdcard
Delete the update.zip file
Open the recovery folder
Open the command file in the recovery folder
Make sure the line has "SDCARD2" and NOT "SDCARD"
You can edit it. Make sure if you do it doesn't add a .txt extension to it
Rename the 3389 update zip file to "update.zip" and place that on the root of the micro sdcard
Insert micro sdcard in the tablet
Boot the tablet holding the Power/Vol+
Hold the Vol+ until you see " Recovery key pressed"
Let it install and reboot and you should be back to stock.
Install the performance pack the same way.
If you install clockwork recovery you don't need the recovery command file to flash roms. I can't recommend strongly enough to install clockwork recovery to do this and to wipe data/cache
I think your problem has a very simple solution because I have had this problem after the wifi teather app recently updated all I had to do is go into the wifi feather app and select a channel I choose channel 11. Then I went into settings on the tablet and wifi network I pressed menu advanced and choose channel 11 also this fixed my issues hopefully it will fix yours I too use a Motorola Droid 1 and a G Tablet my tab is on vegan5.1 with pershoots latest kernal my D1running the latest bugless beast with jdlfg 1125 Kernel
I was able to install clockwork mod so far but I am still working on getting the enhancement to load. It aborts install. I will try to re download it.
Neither enhancement works. Clockwork mod works, it starts to load the fine then quits with a prompt, (bad) cannot load file. 3389 and 3452 both come up bad. I re downloaded both several times form all of the sites still hosting it. Some of the sites had the file removed.
Why is this not working? I followed it to a tee. Same procedure as installing clockwork mod. Command file is formatted correctly and directs to the proper folders and drive. (SDCARD) I also cleared the cache and did a backup.
Any other suggestions? Thanks for the help so far. It at least installed clockwork mod. I did at least figure out how to return the wifi settings to allow infrastructure to work. Every time I try to install this it skews the file and permissions. I can at least return it so it is still useable but would really like to get the ad hoc to work.
I also tried WPA, no encryption, changing channels, changing IP addresses, and just about every other setting on this.
Tablet has original OTA update from 12/25/10 then rooted.
Once clockwork is installed you no longer need the recovery/command. Make sure the 3389 performance pack is a .zip and not a .rar. If it is .rar then you need to "unrar" it.
Place it on the internal sdcard and select it in the clockwork recovery menu. Don't use Rom Manager.
None of this is working. Error comes up:
E:Can't open /sdcard/update.zip
(bad)
Installation aborted
I have tried to re download the files, I have just renamed them, I have pasted them into an already labeled zip folder, nither option works.
I use the manual install on CWMod so I know I am choosing the correct file andf it just says that it is bad.
Is it possible that the download file is no good? When you said to "unrar" it is that simply changing the file name or is it copying to another folder or extracting the file??? If the file is bad then I am just going in circles but if I am doing something wrong (which I don't think so) then I am missing something.
After a reboot I need to go into the wifi folder to open permissions for the wifi to connect again and then it will connect to my router but not the droid.
Brian Oshman said:
None of this is working. Error comes up:
E:Can't open /sdcard/update.zip
(bad)
Installation aborted
I have tried to re download the files, I have just renamed them, I have pasted them into an already labeled zip folder, nither option works.
I use the manual install on CWMod so I know I am choosing the correct file andf it just says that it is bad.
Is it possible that the download file is no good? When you said to "unrar" it is that simply changing the file name or is it copying to another folder or extracting the file??? If the file is bad then I am just going in circles but if I am doing something wrong (which I don't think so) then I am missing something.
After a reboot I need to go into the wifi folder to open permissions for the wifi to connect again and then it will connect to my router but not the droid.
Click to expand...
Click to collapse
I dunno if this will help but i remember on my droid it never liked working with a files named update.zip in cwm.. change the name of the file and then apply it
"rar" is another file compression like zip. On windows download 7zip. It will allow you to "unrar" ie "unzip" the file. I just checked and the performance pack is a .rar file. You can't rename it to .zip. You must extract it using the unrar file extraction tool. There will be a .zip inside that that you can flash
That was it!!!! Thanks for all of your help and for replying. The 7zip did the trick. I was unaware that the zip format was different.
Very cool. Works on Droid 1 wireless tether.
if the files you are downloading are in RAR format, you cannot simply rename them to ZIP. You will need to use a WinZip, 7Zip, or some other utility to extract the update.zip file from the file you downloaded.
Once you have extracted update.zip to your PC, you can then connect your g tablet via USB and connect that way. Copy update.zip to the folder of your choice and then reboot into cwm to install the update.
Ok, the new flash works, ad hoc now works and it added the market and the stock android camera and some other things. Here is the new issue and I will just continue in this thread since one relates to the uprade of another.
After the upgrade, the internal camera will take pics an are viewable in the "gallery" but any jpg loaded into the tablet via usb or e mail are not visible. He gallery shows a blank thumbnail and opens blank file as i the image was there but no actual pkc. I saved the pic in DCIM, camera, thumbnails, andro, sdcard, etc... and the gallery will pick up all of these files but displays blank thumbnails and blank photos.
I realize that th original camera and viewer were different than the android camera and gallery. Th problem is that I want to be able to view e mailed photos and imported photos like it used to. As I said it does store and view pics taken with the internal camera but that is not of real importance here but a fix woud probably fix all of it.
Anybody have a patch or fix for that that would not undo any of the other changes? Also, a patch to usb tether a droid or other mass storage device?
Thanks in advance.
You can attach a fat32 external HD to the Gtab. The externally powered ones seem to work more consistantly.
thebadfrog said:
You can attach a fat32 external HD to the Gtab. The externally powered ones seem to work more consistantly.
Click to expand...
Click to collapse
Thanks.
Anyone got a fix for the gallery problem?
Brian Oshman said:
Thanks.
Anyone got a fix for the gallery problem?
Click to expand...
Click to collapse
Never mind. I figured it out. Thanks.
hi, my SNS has been ROOTed , the version is 2.3.1, for the google maps navagator can't work in my country reason, so, I also have been removed the original GMaps-5.0 use the System-App-Remover , replace installed the Googlemap-4.6-brut version.
now, here is the problem:
I download the 601kb upgrade file , moved to the sdcard/os, when I chose this zip file to apply from my clockworkmod recovery v3.0.0.5, it's always aborted like the attached image,
I have tried such as
1. remove the googlemap-4.6-brut, download & install the latest GoogleMaps from the market,
2. download the Maps.apk directly, use "adb push Maps.apk /system/app"
all can't pass the recovery process, aborted with such "assert failed ..."message,
PLS help me ! Thanks a lot.
vibramm said:
hi, my SNS has been ROOTed , the version is 2.3.1, for the google maps navagator can't work in my country reason, so, I also have been removed the original GMaps-5.0 use the System-App-Remover , replace installed the Googlemap-4.6-brut version.
now, here is the problem:
I download the 601kb upgrade file , moved to the sdcard/os, when I chose this zip file to apply from my clockworkmod recovery v3.0.0.5, it's always aborted like the attached image,
I have tried such as
1. remove the googlemap-4.6-brut, download & install the latest GoogleMaps from the market,
2. download the Maps.apk directly, use "adb push Maps.apk /system/app"
all can't pass the recovery process, aborted with such "assert failed ..."message,
PLS help me ! Thanks a lot.
Click to expand...
Click to collapse
The update script is failing because you have modified system files that it expects to find (specifically Google Maps) in the /system/app directory. Downloading Maps from the Market won't help you, because you have to put a copy that will match the CRC check for Google Maps in the /system/app folder, and the Market download copy goes into /data/app and has a different name, crc, etc.
You need to get a clean copy from a 2.3.1 ROM that hasn't been modified in any way and put it back in /system/app.
You could also edit the updater-script to skip that file... Check out this thread, start reading around post 184 to the end and you should be able to figure it out: http://forum.xda-developers.com/showthread.php?t=923705&page=19
distortedloop said:
The update script is failing because you have modified system files that it expects to find (specifically Google Maps) in the /system/app directory. Downloading Maps from the Market won't help you, because you have to put a copy that will match the CRC check for Google Maps in the /system/app folder, and the Market download copy goes into /data/app and has a different name, crc, etc.
You need to get a clean copy from a 2.3.1 ROM that hasn't been modified in any way and put it back in /system/app.
You could also edit the updater-script to skip that file... Check out this thread, start reading around post 184 to the end and you should be able to figure it out: http://forum.xda-developers.com/showthread.php?t=923705&page=19
Click to expand...
Click to collapse
Thanks distortedloop !
I have been restore the stock 2.3.1 img through the nandroid, unroot it , upgrade to 2.3.2 OTA, then, re-Rooted it , many thanks !
Happy rabbit year ! -
This thread is closed.
You can find the new one here:
http://forum.xda-developers.com/showthread.php?t=1209425
Didnt you know some thing, ask me!
Welcome in the Thread for Samsung's Galaxy Gio (S5660)
INDEX
1. Root
2. Custom Bootanimation
3. Firmware releases
_________________________________________________________
First, i will post update_[number].zip files.
You can add this updates on this way:
1. Shutdown your phone.
2. press: Home button + Volume button - + On button
3. go to Add Update from SD-card.
4. Search for the update_[number].zip file on your SD-card
5. Run the update
Root
You can root Android 2.2 with: http://forum.xda-developers.com/showthread.php?t=803682
You can root Android 2.3.3 with: http://forum.xda-developers.com/showthread.php?t=1111414
Custom bootanimation
What you need:
- Rooted Galaxy Gio S5660 or an other Galaxy Phone.
- Data Cable or SD-Card reader
- Root explorer
- Little bit skills
1. download the patch_cutom_bootanimation.zip file bellow.
2. unzip the files to a new folder on your SDcard called: patchfiles
3. Open root explorer
4. go to /sd-card/patchfiles
5. press menu button and select multi-select
6. select all files without bootanimation.zip
7. press now on the bottom, copy
8. press now 2 times on back button
9. go to /system/bin/
10. press now paste and replace the files.
Now you need only place the bootanimation.zip in his directory
11. go back to your patchfile folder on your SD-card
12. copy bootanimation.zip and place him in /system/media/
13. reboot your device and watch your brand new bootanimation!
TIP:
1. With an bootanimation boot your device slowlier then normal.
you can also delete bootanimation.zip, your device is now booting with the Android 3.1 bootanimation, i like it!
2. You can also remove the shutdown animation, but it isnt posible to change him.
rename in the /system/media/video/shutdown/ the file shutdown.qmg to shutdown_backup.qmg
REMOVE SIMLOCK
http://forum.xda-developers.com/showthread.php?t=1139251
Firmware
2.2.1 unofficial - http://hotfile.com/dl/115778530/c3dab6d/S5660XXKC5_OXXKC3_XXKB9.rar.html
2.3.3 unofficial 2 june 2011 - http://hotfile.com/dl/119787749/eeddc82/S5660XXKPA.rar.html
2.3.3 official 24 june 2011 - http://hotfile.com/dl/123845369/b1f54c4/S5660XXKPE_S5660XXKPA_S5660OXFKP1.rar.html <- also on KIES
2.3.3 official 24 june 2011 - http://hotfile.com/dl/124686521/ca109ee/S5660XXKPE_S5660XXKPA_S5660XENKP1.rar.html <- also on KIES
2.3.4 unofficial 24 june 2011 - http://hotfile.com/dl/124831067/3d27a39/S5660XXKQ3_S5660XXKQ3_S5660SEBKQ1.rar.html
2.3.4 unofficial 23 july 2011 - http://hotfile.com/dl/125489515/6fa36c7/S5660XXKQ6_S5660XXKQ5_S5660SEBKQ1.rar.html
pass: samfirmware.com
APK lost ?
Backup System Apps (apk), download here:
Froyo - flashing ...
Gingerbread All apps, backup system/apps/ 90MB
Did you lose an APK file?
Get you errors with a APK?
Do you Morph you APK wrong?
AND NO BACKUP?!
Search your APK from the ZIP file,
Apply him to system/apps/
And your apk will work as even before!
TAGS: Galaxy, Gio, APK, Lost, S5660, system, apps, gMail
Custom ROM
http://forum.xda-developers.com/showthread.php?t=1136798
I' m following this thread. Please continuie sharing
how to enable a2sd darktremor to S5660XXKPA?
Following this thread. Thanks for getting it going.
nice work bro please keep it up
Nice Work , keep it going..
Me too following this topic.
How to make a CUSTOM BOOT ANIMATION...
Install winrar
Root your Android!
using the console or Root explorer goto the /system/media directory.
Copy bootanimation.zip to your SD Card.
Connect your Android to your computer with usb and mount the SD Card
Copy bootanimation.zip to your computer.
extract bootanimation.zip to a folder
Inside you will find 2 folders with all the individual PNG files in them.
With photoshop or paint modify the png files to add your custom graphics.
Highlight the two folders and the desc file.
Right click the highlighted files.
Select add to archive.
Select Zip
In the compression method drop down box select Store. (this is key if you dont do this it wont play the animation)
save the archive as bootanimation.zip
copy the new bootanimation.zip to your SD Card
Load terminal emulator and enter the following commands with an enter after each
***BEGIN TERMINAL COMMANDS***
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
dd if=/sdcard/bootanimation.zip of=/system/media/bootanimation.zip
Reboot
Great!!!
Sent from my GT-S5660 using XDA App
Patch added, sorry ive also a daily job...
strunkie said:
Backup System Apps (apk), download here:
Uploading...
Click to expand...
Click to collapse
this is exactly what I need!
I screwed up with Calendar.apk and Calendar.odex and almost anybody on forums wants to help...
why not uploading a full original \system\app folder for every possible needs?
is it ready or still uploading?
keep sharing, Btw when upgrade to ginger bread will be available officially ?
taand said:
keep sharing, Btw when upgrade to ginger bread will be available officially ?
Click to expand...
Click to collapse
Samsung will release 2.3.3 and 2.3.4.
I think that 2.3.4 the lastest update is.
beeryourself said:
this is exactly what I need!
I screwed up with Calendar.apk and Calendar.odex and almost anybody on forums wants to help...
why not uploading a full original \system\app folder for every possible needs?
is it ready or still uploading?
Click to expand...
Click to collapse
finished, will add now
strunkie said:
finished, will add now
Click to expand...
Click to collapse
Great!
that's exactly what I needed!
Thanks!
well, it's still not working...
I downloaded the zip, put Calendar.apk and Calendar.odex on the phone, then moved to \system\app and changed proprietary to 0-root and permissions rw-r--r-- for both. reboot. no calendar application in drawer.
what else can i do to get this damn app back?
beeryourself said:
great! waiting online...
Click to expand...
Click to collapse
Backup System Apps (apk), download here:
All apps, backup system/apps/
90MB
See third post
Does somebody here also have the phone getting turned off in your pocket problem?
xpowerstef said:
Does somebody here also have the phone getting turned off in your pocket problem?
Click to expand...
Click to collapse
Some times my phone wont wake-up, then i hold the power button for a few seconds the phone will reboot then.
Do you have the same problem, its tooks longer to get your phone on...