maybe it's a stupid question... i'm gonna flash the new ICS Room but i dont want to see any rainbow..
actually i'm using ZTR rom... i installed it from froyo stock..
which bootloader i have?..
Suggestion since your not familiar with what your bootloaders are...do some reading...
and since ics is still being in the delivery room not born yet....
Do some homework...
If you flashed the ICS kernel and you are seeing rainbow recovery, then you are on Froyo bootloaders.
What carrier
Sent from my SGH-I997 using xda premium
i've not flashed ICS yet, it's from att.. i'm not familiar with what bootloaders are.. according to some things I've read i know this is what "SAYS" kernel what to load until phone starts.. but when i updated froyo to GB with zeus 6 and then ZTR i did not do anything about bootloader just installed a 3e modded recovery and i could flash it well!! i've even got back to stock froyo using odin
froyo stock to ztr means that you most likely are on froyo bootloaders.
Simply flashing a ROM wont update you bootloaders. The easiest way to update bootloaders is through Qkster's Heimdall from my experience. As far as Roger's goes I believe their stock Bootloaders are GB. I am not 100% sure of this, but I believe that is correct.
Take a pic of what your phone looks like in download mode so I can determine whether or not you have gingerbread bootloaders
Sent from my SGH-I997 using xda premium
theaductiv
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the image what looks like in recovery mode.. i could take a photo of my phone so i googled one exactly the same.. also mine show at top of the screen
Custom Binary Download : NO
Current Binary : Samsung Official.. i think i'm on froyo BL.. i'll wait a lil ultil i know how to get GB BL so then i will flash ICS.. Thank you so muchh!!
Use heimdall to flash bootloaders-put phone in downloaded mode connect to PC run heimdal and flash bootloaders
Sent from my SGH-I997 using XDA
MaliciousIntent69 said:
Simply flashing a ROM wont update you bootloaders. The easiest way to update bootloaders is through Qkster's Heimdall from my experience. As far as Roger's goes I believe their stock Bootloaders are GB. I am not 100% sure of this, but I believe that is correct.
Click to expand...
Click to collapse
either qkster's or AdamOutler's back to stock will install GB bootloaders.
None of the custom ROMs have bootloaders built-in, only kernels, modems and such are built in.
Qkster's Hemidall is the easiest I've found. You need to flash the rom first before the checkbox to install bootloaders is available. Then check the box and flash again.
Use hemidall 1 click back to stock uclb3...tick on "install bootloaders" (if the option cannot be ticked flash the the stock rom anyway but leave the hemidall program window open, ensure the phone is has booted uo completely then go back into download mode and then you should be able to tick it and flash over the stock rom together with gb bootloaders) ..then flash entropy dd to get cwm and root with super one click...
Sent from my SGH-I997 using xda premium
quikvzla said:
maybe it's a stupid question... i'm gonna flash the new ICS Room but i dont want to see any rainbow..
actually i'm using ZTR rom... i installed it from froyo stock..
which bootloader i have?..
Click to expand...
Click to collapse
Is it really that bad to see the rainbows? Unlike previous Gingerbread kernels on Froyo bootloaders without the rainbowfix, recovery is semi-usable.
If you get the rainbows, you need to flash. If you don't get the rainbows, you don't need to. Best to check if you need the BLs first.
That said, what you've stated so far makes me think you're probably on Froyo BLs.
I also want to know what BL I'm on. I bought the infuse already rooted and running Zeus build 6 v2. I'm also wanting to flash an ICS Rom soon and don't want to brick cause I have to pc.
Sent from my SAMSUNG-SGH-I997 using XDA
popi09 said:
I also want to know what BL I'm on. I bought the infuse already rooted and running Zeus build 6 v2. I'm also wanting to flash an ICS Rom soon and don't want to brick cause I have to pc.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
If you follow the direction on Entropy512 post, look at post 3 regarding bootloaders..... Read all op post 1-3 then read again...ok stay in that thread once you decided to run the ROM, any questions the fellow thread user will help, ok
http://forum.xda-developers.com/showthread.php?t=1601844
So I guess I'm on the gingerbread firmware since my CWM is red? Sorry for all the questions, just don't want to brick lol.
Sent from my SAMSUNG-SGH-I997 using XDA
Your on froyo boot loaders... just use Odin... flash the uckk4 leak... then the community kernel to get cwm.. sound like yo really don't know what your doing, so using hemidal might not work for you.. the UCKK4 leak will give you boot loaders... then flash jts custom recovery to flash ics....
popi09 said:
So I guess I'm on the gingerbread firmware since my CWM is red? Sorry for all the questions, just don't want to brick lol. Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Ok if really want to attempt this do some reading...i suggest using this thread link below ...no extra flashing with diff files it's setup to use one file to flash first and to flash with same file again..read the OP then reread...plus the support if needed is here...your call...
http://forum.xda-developers.com/showthread.php?t=1601844
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
popi09 said:
So I guess I'm on the gingerbread firmware since my CWM is red? Sorry for all the questions, just don't want to brick lol.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
No that has nothing to do with bootloaders.
Seriously, don't **** with them unless you've confirmed you need them by actually seeing the rainbows.
Related
****I'm not responsible for what you do to your phone. Love it or hate it, but whatever happens, you are an adult****
This is the EC10 update for the Mesmerize. There is no difference between this one and the official update from the USCC homepage other than I rebuilt this one to work with Odin, instead of Kies.
To use these files, flash in Odin.
#####IF YOU HAVE VOODOO ENABLED, DISABLE LAGFIX BEFORE YOU USE ODIN#####
1. Pull your phone battery
2. Start Odin
3. Click PIT and select the .pit file from the download
4. Check the PDA box, Click PDA and select the .tar.md5 file from the download
5. Plug your phone into the USB port and hold volume down
-your phone should go into download mode
6.Verify that Odin sees your phone.
-if not, try another USB port
7. Click Start
It will look similar to this. -- and when i say similar, I mean 'not exactly like'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mesmerize EC10 with Stock Recovery
*Removed Root/Voodoo/Custom recovery build. Obsolete with all of the new kernels and recoveries out there now anyway.
*Removed Combo ROM from this thread.
Second! About time you released this. Good work.
any plans to make a deodexed Rom for this? if so as soon as you release it ill start porting themes for it, or with some help...il make a deodexed ROM for this
Is the Combo Rom fully functional or is it missing things like the AOSP Rom is?
BakedTator said:
any plans to make a deodexed Rom for this? if so as soon as you release it ill start porting themes for it
Click to expand...
Click to collapse
He already said the Combo Rom is deodexed
akellar said:
He already said the Combo Rom is deodexed
Click to expand...
Click to collapse
thought he said "Neither are rooted or deodexed"...if im misunderstanding this then good...lol
BakedTator said:
thought he said "Neither are rooted or deodexed"
Click to expand...
Click to collapse
Keep reading
Neither are rooted or deodexed. That's what the ROM is for.
akellar said:
Keep reading
Neither are rooted or deodexed. That's what the ROM is for.
Click to expand...
Click to collapse
im so confused...lol...so this is an all in one right? forgive me for my retardation please...been a long day already
BakedTator said:
im so confused...lol...so this is an all in one right? forgive me for my retardation please...been a long day already
Click to expand...
Click to collapse
The first one is stock. The second one is stock with CWM. The 3rd is a hybrid of AOSP and is deodexed.
And we have officially hijacked his thread
akellar said:
The first one is stock. The second one is stock with CWM. The 3rd is a hybrid of AOSP and is deodexed.
And we have officially hijacked his thread
Click to expand...
Click to collapse
yes sir we have...damn us!!!! so flash the third 1 in cwm right....others are for odin....i read this post like 4 times...and im still lost...think im having an off day
EDIT : it all makes sense now...holy crap im stupid!!!!!!
and Tator says let the thread be hijacked!!!
will have puzzlelock in a min
wow, you two just filled up the whole first page with banter lol..
i think you two could probably host a TV show together.... I'd watch it..
elijahblake said:
wow, you two just filled up the whole first page with banter lol..
i think you two could probably host a TV show together.... I'd watch it..
Click to expand...
Click to collapse
thats good...think it would be funny???
Back on topic, I got the puzzle unlock done and working for this and i like what phidelt has done with the launchers and its so light, not as light as aosp but light!!! great work phidelt...you never let us down
Quick question, does this rom require a factory reset/will I lose everything if I flash the rom?
I always backup anyway, just wondering if I should flash this now or wait till I get home and can access my titanium backups.
Also, do I need to do the odin flash first (like when going to the 2.2 PnP's) or can I just flash the rom on it's own?
Sent from my voodoo froyo Mesmerize
Mesmerizeuser said:
Quick question, does this rom require a factory reset/will I lose everything if I flash the rom?
I always backup anyway, just wondering if I should flash this now or wait till I get home and can access my titanium backups.
Also, do I need to do the odin flash first (like when going to the 2.2 PnP's) or can I just flash the rom on it's own?
Sent from my voodoo froyo Mesmerize
Click to expand...
Click to collapse
Gotta use odin first just like the other builds, then flash the custom rom/kernel package.
Thanks phidelt, as always you are the man and very much appreciated!
Can I flash the old voodoo kernal for the EC10+custom recovery or will I have to download the rom to get voodoo?
chidesd said:
Can I flash the old voodoo kernal for the EC10+custom recovery or will I have to download the rom to get voodoo?
Click to expand...
Click to collapse
I'm thinking that the AOSP part is the kernel (or at least part of it) and it's voodoo and faster than our previous one - but I could be way off. I'm about to find out just getting the files downloaded.
Phidelt would have to advise on whether EA11 kernel would work but I would imagine it would considering it did with the last two and this is just closer to being polished off, no major changes.
Is MMS and bluetooth working in the hybrid rom?
chidesd said:
Can I flash the old voodoo kernal for the EC10+custom recovery or will I have to download the rom to get voodoo?
Click to expand...
Click to collapse
Yes, you can flash the old voodoo kernel. It's actually the same kernel in the ROM.
Sent from my SCH-I500
chidesd said:
Is MMS and bluetooth working in the hybrid rom?
Click to expand...
Click to collapse
Yes. Both should work just fine. I'm not using AOSP MMS in this version.
Sent from my SCH-I500
lol nevermind, i'm slow
Repost of Krylon's thread:
http://rootzwiki.com/showthread.php?t=2972
Odin
NOT deodexed
ODEXED
No root
No custom kernel
Plain samsung leak with no modifications.
krylon360 said:
ro.build.display.id=GINGERBREAD.VUVKH2
ro.build.date=Thu Aug 11 23:26:34 KST 2011
Here we go again.
Found another leak for the SGS4G. This one has a build date of 08/11.
I'm sure this fixes some issues that were found in KH1.
Same steps, Extract then ODIN to flash.
I'm sure a Deodexed version will come soon.
Thanks to my partner in crime Chainfire
Download
Click to expand...
Click to collapse
I'm bearly getting settled in with KH1 and here's KH2.. LOL!! I just love it!
LOL!! This is getting better!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Leaks and versions are too fast for me...ill stay with kg6 till official versio. Will be out
Sent from my SGH-T959V using XDA App
wizardslovak said:
Leaks and versions are too fast for me...ill stay with kg6 till official versio. Will be out
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
KG6 was supposed to be the official version. Hahaha.
Yippie ! More goodies to play with haha
Sent from my SGH-T959V using XDA Premium App
Can I directly flash it even if I'm on the GB Leak?
Sent from my SGH-T959V using XDA Premium App
peterpandesal06 said:
Can I directly flash it even if I'm on the GB Leak?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Yup, it's an Odin rom.
How's the wifi with this version?
Sent from my SGH-T959V using XDA Premium App
FBis251 said:
Yup, it's an Odin rom.
Click to expand...
Click to collapse
even if i did not flash the kh1 and directly skip to this ROM is it still ok?
+1
OnE ShoT said:
How's the wifi with this version?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Sent from my SGH-T959V using XDA App
peterpandesal06 said:
even if i did not flash the kh1 and directly skip to this ROM is it still ok?
Click to expand...
Click to collapse
Well this doesn't come with bootloaders, so as long as you have the GB bootloaders from KG4 you should be gravy.
EDIT
People asking about wifi, I haven't flashed it. It's only been out for less than 2 hours.
Oh, this leak doesn't have bootloaders this time? That's really interesting...
Which was the latest GB release with bootloaders? I thought KH1 had them but now I'm not sure. Seems like there must be bootloaders out for KH2 somewhere. Where's krylon getting these releases from? The only Samsung site I know about is the one with source code on it.
I'm mistaken. This does have it. I didn't look at the right filenames
KF1 came with both boot.bin and sbl.bin, the primary and secondary bootloaders.
KG4,KG6,KH2 came with sbl.bin only, which modified recovery and download modes
Those are the only ones I have on my computer, but it looks like all the GB leaks came with at least a secondary bootloader, which is what you need.
Not sure where krylon is grabbing them from, but I'd guess he's got a URL that Kies might use to check for updates and grab files.
nazcalito said:
Which was the latest GB release with bootloaders? I thought KH1 had them but now I'm not sure. Seems like there must be bootloaders out for KH2 somewhere. Where's krylon getting these releases from? The only Samsung site I know about is the one with source code on it.
Click to expand...
Click to collapse
KG4 has the bootloaders in it.
Just did some testing. Wifi signal full, incoming calls don't get dropped, all show up on call logs, no force closes. I haven't tried restoring apps or data, and haven't tried the deodexer yet but this is going REALLY well.
FBis251 said:
Just did some testing. Wifi signal full, incoming calls don't get dropped, all show up on call logs, no force closes. I haven't tried restoring apps or data, and haven't tried the deodexer yet but this is going REALLY well.
Click to expand...
Click to collapse
Sounds awesome.
Would you happen to know if I would have to disable voodoo before odin-flashing this?
Might wait for a cwm zip..
overthinkingme said:
Sounds awesome.
Would you happen to know if I would have to disable voodoo before odin-flashing this?
Might wait for a cwm zip..
Click to expand...
Click to collapse
Yeah you'd better disable it since this comes with a stock kernel which has no ext4 support. You can enable it again after you reflash the KG4 custom kernel with voodoo.
I just got ICBINB KH2 the way I want it.
I wonder if the changes are significant in this build to flash.
I still have MMS issues with KH1 though. I have to use handcent for it to work.
Hello again everybody!
In #skyrocket irc.irondust.net, I've been working with the awesome Kuraijay to get a flashing method going that bypasses odin entirely, letting us flash without the bootloader restrictions (that don't allow you to flash rogers radio to AT&T phone for example)
Well, it works! I'm putting together a package for things now.
Can someone who is on the AT&T OTA 2.3.6 update (rooted) please dump the radio and upload it for me?
Here's how:
boot to CWM
connect usb
open command prompt, adb shell
on the CWM screen, go to mounts and storage -> mount emmc
type:
dd if=/dev/block/mmcblk0p17 of=/emmc/radio-dump.bin
then type "exit" to leave adb shell when it's done
now:
"adb pull /emmc/radio-dump.bin ."
That should leave you with radio-dump.bin in the current folder, zip that, upload and link please
I currently have a copy of the stock AT&T radio, and the stock Rogers radio. I have confirmed the ability to flash back and forth between versions so now we need to get them together so I can make a nice post explaining how and provide easy CWM zips
This allows flashing back to fully stock without triggering the flash counter or using odin at all. Should be able to provide a CWM zip that works great to flash back to stock!
Obligatory screenshot (note this is from an AT&T Skyrocket
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sure thing
http://dev-host.org/nt9qyn873oth/radio-dump.zip
Friggin fantastic!
Sent from my SGH-T989 using XDA App
Much appreciated, romracer
Any chance you could do the same for /system, /cache, /recovery, and /boot?
dd if=/dev/block/mmcblk0p24 of=/emmc/system-dump.bin
dd if=/dev/block/mmcblk0p26 of=/emmc/cache-dump.bin
dd if=/dev/block/mmcblk0p22 of=/emmc/recovery-dump.bin
dd if=/dev/block/mmcblk0p8 of=/emmc/boot-dump.bin
Now if we could only figure out how to reset the flash counter! I'm already at 3
L1near said:
Now if we could only figure out how to reset the flash counter! I'm already at 3
Click to expand...
Click to collapse
I'm already at 6! Had some significant issues with melvins rom
Sent from my SGH-i727
cough, 23 here! I'm an addict.
Sent from my SAMSUNG-SGH-I727 using xda premium
How do you get the flash counter number? I wanna see if mine was incremented when I flashed CWM.
Sent from my SAMSUNG-SGH-I727 using XDA App
I was able to successfully port the DoCoMo SC-03D ROM using this method to our Skyrocket
Obligatory images follow:
(Yes, this is AT&T Skyrocket running AT&T Custom Kernel, Rogers Radio, DoCoMo ROM, franken-rocket!)
awesome work fellas! I up for the next phase - resetting that damn counter!
Da_G said:
I was able to successfully port the DoCoMo SC-03D ROM using this method to our Skyrocket
Obligatory images follow:
(Yes, this is AT&T Skyrocket running AT&T Custom Kernel, Rogers Radio, DoCoMo ROM, franken-rocket!)
Click to expand...
Click to collapse
and this is exactly why I am happy to see this!!!!
Da_G said:
I was able to successfully port the DoCoMo SC-03D ROM using this method to our Skyrocket
Obligatory images follow:
(Yes, this is AT&T Skyrocket running AT&T Custom Kernel, Rogers Radio, DoCoMo ROM, franken-rocket!)
Click to expand...
Click to collapse
Awesome!! Are you going to put out a ATT/Rogers/DoCoMo-Franken-Rocket Rom? Is there any DoCoMo goodies we can use? I'd love to mess around with this! That lockscreen looks pppuuurrrrddddddyy.
Nice work!
Sure, i'm just fixing up some stuffs in the ROM (i had to strip a lot for it to fit in our FS, DoCoMo uses a much larger system partition and has way more stuffs in the ROM)
PScales17 said:
How do you get the flash counter number? I wanna see if mine was incremented when I flashed CWM.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Just boot to download mode and it'll show you the counter.
I'm at six. Flashing recovery (CWM) with Odin doesn't trip it for me.
But flashing the stock ROM via Odin does trip it.
Be nice if we can ever get MIUI on our phones
LordGeek said:
Be nice if we can ever get MIUI on our phones
Click to expand...
Click to collapse
+1
Sent from my SAMSUNG-SGH-I727 using xda premium
Da_G said:
Sure, i'm just fixing up some stuffs in the ROM (i had to strip a lot for it to fit in our FS, DoCoMo uses a much larger system partition and has way more stuffs in the ROM)
Click to expand...
Click to collapse
yes,just like GS2(docomo model SC-02C), have a larger system partition than other GS2 models
What does the counter do? Does it matter? Do you only have a certain number of flashes you are allowed?
00mred00 said:
and this is exactly why I am happy to see this!!!!
Click to expand...
Click to collapse
i want this!!
Sent from my SAMSUNG-SGH-I727 using xda premium
This is the type of thing I was working on when I broke my phone! Glad to see a pro working on it. TBH, all I was after was the TRUE network status, but that lockscreen looks pretty sick!
As for the flash counter, I've tried to reset it with a jig but that's a no-go. Hopefully I get it RMA'd anyway!
Stock EL30 packages​
These packages will revert your phone to 100% stock EL30.
They contain the Stock system, stock kernel, stock recovery and stock bootlogo.
The packages will also wipe your data and cache partitions.
These packages do not contain a modem, because there is no flashable EL30 modem. If you want to get to the EL30 modem, see this thread.
Downloads​
Stock EL30 Heimdall Package (MD5: CE8BF07CA73BE18E72E6EAE18916FBFB)
Requires Heimdall to flash.
Contains system,kernel,recovery,data,cache,param
Can be used to come back from MTD (Check "Repartition")
Does *NOT* contain a modem (there is no flashable EL30 modem.bin)
Stock EL30 ODIN Package (MD5:FD4F656BFE754E167B375EB8B01D9C88)
Execute ODIN, load *tar.md5 file into PDA slot and click "Start"
Contains system,kernel,recovery,data,cache,param
Can be used to come back from MTD (load included *.pit file and check "Repartition")
Does *NOT* contain a modem (there is no flashable EL30 modem.bin)
Notes​
A great overview of how to use ODIN can be found here.
If flashing fails:
unplug cable
pull battery
re-enter download mode
plug cable back in/try a different cable/try and different usb port
try rebooting before repeating step 1-4 if flashing repeatedly fails
Thread Hall of Shame:
Dante of the Inferno said:
So then which modem does the tar ball have, EH17?
Click to expand...
Click to collapse
w00t
Sent from my SPH-D700 using Tapatalk
Nice work.
And I have a deodexed stock rooted zip ready to go, just getting ready to upload it.
bbelos said:
Nice work.
And I have a deodexed stock rooted zip ready to go, just getting ready to upload it.
Click to expand...
Click to collapse
Awesome. I'll pass on making the update zip for now. Is there any demand for an truely stock update.zip?
Oh, and BTW I added the ODIN package.
toadlife said:
Oh, and BTW I added the ODIN package.
Click to expand...
Click to collapse
Excellent work Toadlife.
Sent from my SPH-D700 using xda premium
Thanks Toad! I
Sent from my SPH-D700 using XDA Premium App
Good no more going back to ec05 appreciate
Sent from my SPH-D700 using xda premium
Yay!!!! Thanks toad
Sent from my SPH-D700 using Tapatalk
Oooops double post...
Biggoron said:
Good no more going back to ec05 appreciate
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Unless you want to flash the EL30 modem.
RandomKing said:
Unless you want to flash the EL30 modem.
Click to expand...
Click to collapse
I hear its crap anyways... ill stick to ei22
Sent from my SPH-D700 using xda premium
Biggoron said:
I hear its crap anyways... ill stick to ei22
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
It is actually pretty good for me. My signal and speeds are now amazing...
Sent from my SPH-D700 using Tapatalk
Okay regaurdless I can flash the delta anyways
Sent from my SPH-D700 using xda premium
So then which modem does the tar ball have, EH17? If so, then we just have to flash the EI22 modem, reboot and flash the EL30 modem. Btw, does this tar ball have stock recovery? If so, will we be able to put CWM or ACS Recovery back on EL30?
Dante of the Inferno said:
So then which modem does the tar ball have, EH17?
Click to expand...
Click to collapse
*facepalm*
Read the OP. It mentions the modem.
Dante of the Inferno said:
If so, then we just have to flash the EI22 modem, reboot and flash the EL30 modem.
Click to expand...
Click to collapse
To get to the EI30 modem, you have to be on EI22. There are separate zip files that will upgrade your modem from that version. See this thread.
Btw, does this tar ball have stock recovery? If so, will we be able to put CWM or ACS Recovery back on EL30?
Click to expand...
Click to collapse
Yes, and yes.
Thanks toad. Flashed this just to play with it and it seems pretty smooth. Can't wait for the devs to come out with some awesome ROM's. I too can report that my 4G speeds are pretty silly lately on this modem. Though I also think that may be the mass migration to Iphones in my area
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes, this is true. I'm sorry non 4G brothers and sisters
bit1 said:
Thanks toad. Flashed this just to play with it and it seems pretty smooth. Can't wait for the devs to come out with some awesome ROM's. I too can report that my 4G speeds are pretty silly lately on this modem. Though I also think that may be the mass migration to Iphones in my area
Yes, this is true. I'm sorry non 4G brothers and sisters
Click to expand...
Click to collapse
I've been having some faster than usual 4G speeds too! I thought it was just me lol
Sent from my SPH-D700 using Tapatalk
Could someone tell me if you can flash the pre-rooted ROMS (specifically from bbelos) from this ROM's stock recovery? I ask because I don't think I've ever dealt with stock recovery before (only CWM and ACS Recovery).
Dante of the Inferno said:
Could someone tell me if you can flash the pre-rooted ROMS (specifically from bbelos) from this ROM's stock recovery? I ask because I don't think I've ever dealt with stock recovery before (only CWM and ACS Recovery).
Click to expand...
Click to collapse
No. You need CWM recovery to flash non-official update.zip files. You can get CWM5 here.
the download link is here, flashable zip file : http://pan.baidu.com/share/link?shareid=4109&uk=3170931929
original thread is here , in chinese : http://bbs.mfunz.com/thread-582725-1-1.html
there are lots of modification , including :
1. zipalign
2. deodex
3. 1% battery
4. weaker vibrate
5. SuperSU included
6. Beats Audio
7. Sony Graphic Engine
8. Supercharged modifications included
etc.
I can't find the non-modified OTA.
I think it can be flashed in to MB865 phone just like ME865 flashing with MB865-zip.
WARNING 1 : You must have your phone flashed to ICS (mostly by RSD lite) before you flash this rom.
WARNING 2 : The rom may be over-and-wrongly-modified that made some RAM problem. I suggest you wait some clean roms.
P.S. The previous 04-Jul leaked version includes Both English and Chinese interface and I think this one has the same language module.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
================
based on the same OTA but has less modification : ( 28/8/2012)
1. 1% battery mod
2. NO battery charging LED (OMG)
3. showing battery level in un/lock-screen
4. GPS optimization
5. build.prop and init.d mod. About speed , sd card RW and internet
6. letting the apps to be installed in the phone or SD card.
original thread in chinese : http://bbs.gfan.com/android-4906625-1-1.html
Download :
http://pan.baidu.com/share/link?shareid=7905&uk=3170931929
Some pics of the ROM installed would be nice.
manojsuper said:
official OTA?
Click to expand...
Click to collapse
There were many many leaked versions of the ME865 ICS. This one is modified based on the latest OTA version, distributing from last week for 1000 people only.
Can we use it for MB865 ATT?
Sent from my MB865 using xda premium
ryuben2k said:
Can we use it for MB865 ATT?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I tried to flash the MB865 rom , like those SCV7 roms, into my ME865 as long as it's a CWM flashable rom.
I do think you can make a trial but remember to make a backup and make sure your phone is bootmenu-installed.
*** Your phone must be already updated to any version of ICS ***
flash ?
one question for our DEVs
flashing this is GO or NO GO ?
shardul.phatak said:
one question for our DEVs
flashing this is GO or NO GO ?
Click to expand...
Click to collapse
Bootmenu has problems flashing large zips.
I could be wrong, but i think it's a no go.
Sent from my MB865 using xda premium
matt99017d said:
Bootmenu has problems flashing large zips.
I could be wrong, but i think it's a no go.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I haven't seen any confirmation that its fixed or not. Whirleyeyes is on vacation. So hold on until then.
Sent from my locked MB865 on Ice Cream Sandwich.
So if we don't have ics e can't get an ics ROM. I hate Motorola, they need to unlock the stupid bootloader already. this is why HTC and Samsung are better. I'm so impatient and have sent motorola emails yelling at them.
vujkovicv said:
So if we don't have ics e can't get an ics ROM. I hate Motorola, they need to unlock the stupid bootloader already. this is why HTC and Samsung are better. I'm so impatient and have sent motorola emails yelling at them.
Click to expand...
Click to collapse
There is a way to get an ics ROM onto our Atrix 2 phones. http://forum.xda-developers.com/showthread.php?t=1779968
Then you can use SCv7. http://forum.xda-developers.com/showthread.php?t=1648421
ok i flashed this on my indian atrix 2. was using sc7
warning:- try at ur own risk if it did't work or brick ur phone don't blame me
1)backup with boot menu custom recovery
2)wipe data and cache
3)flashed zip and reboot(it will erase bootmenu hijack but dont worry say goodbye to boot menu)
4)after system boots install bootmenu and install hijack again
:good::good:
first impression is very smooth, will reply if found any bug
I was under the impression boot menu couldn't flash large zips. Basically over 100 mb, much less than a rom. Give us a screeny.
Sent from my MB865 using Tapatalk 2
shamsud said:
ok i flashed this on my indian atrix 2. was using sc7
warning:- try at ur own risk if it did't work or brick ur phone don't blame me
1)backup with boot menu custom recovery
2)wipe data and cache
3)flashed zip and reboot(it will erase bootmenu hijack but dont worry say goodbye to boot menu)
4)after system boots install bootmenu and install hijack again
:good::good:
first impression is very smooth, will reply if found any bug
Click to expand...
Click to collapse
wifi work?
gvsukids said:
wifi work?
Click to expand...
Click to collapse
Build date?
xanadu said:
Build date?
Click to expand...
Click to collapse
i flashed with bootmenu
buid date is Aug. 7
wifi is working
Sent from my ME865
so finally do you recommend it to flash or not? if it has problem with boot menu,so how can we fix it?!
Black Metal said:
so finally do you recommend it to flash or not? if it has problem with boot menu,so how can we fix it?!
Click to expand...
Click to collapse
it ur choice dont blame me if something goes wrong, actually i am "flasholic" so i try to flash every rom "at my own risk".:thumbup:
Bootmenu can be installed once the rom boot
Sent from my ME865
Just a thought
why not use the system keeper option in boot menu instead of saying goodbye to boot menu
that way if something goes wrong you can still get into recovery
it may work
Sent from my ME865
Please clarify
Can someone lease tell me the prerequisites for this rom..
im seeing many comments to this thread and nothing of substance...
do u have to have some sort of ics leak already installed..
or can u just flash via cwm...
i dont have bootmenu installed..
so please anyone can you clarify this..
and list some sort of step by step....