[FWD] [ROM][29/8 Updated] ME865 ICS 4.04 official OTA with modification by siyuwuxin - Motorola Atrix 2

the download link is here, flashable zip file : http://pan.baidu.com/share/link?shareid=4109&uk=3170931929
original thread is here , in chinese : http://bbs.mfunz.com/thread-582725-1-1.html
there are lots of modification , including :
1. zipalign
2. deodex
3. 1% battery
4. weaker vibrate
5. SuperSU included
6. Beats Audio
7. Sony Graphic Engine
8. Supercharged modifications included
etc.
I can't find the non-modified OTA.
I think it can be flashed in to MB865 phone just like ME865 flashing with MB865-zip.
WARNING 1 : You must have your phone flashed to ICS (mostly by RSD lite) before you flash this rom.
WARNING 2 : The rom may be over-and-wrongly-modified that made some RAM problem. I suggest you wait some clean roms.
P.S. The previous 04-Jul leaked version includes Both English and Chinese interface and I think this one has the same language module.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
================
based on the same OTA but has less modification : ( 28/8/2012)
1. 1% battery mod
2. NO battery charging LED (OMG)
3. showing battery level in un/lock-screen
4. GPS optimization
5. build.prop and init.d mod. About speed , sd card RW and internet
6. letting the apps to be installed in the phone or SD card.
original thread in chinese : http://bbs.gfan.com/android-4906625-1-1.html
Download :
http://pan.baidu.com/share/link?shareid=7905&uk=3170931929

Some pics of the ROM installed would be nice.

manojsuper said:
official OTA?
Click to expand...
Click to collapse
There were many many leaked versions of the ME865 ICS. This one is modified based on the latest OTA version, distributing from last week for 1000 people only.

Can we use it for MB865 ATT?
Sent from my MB865 using xda premium

ryuben2k said:
Can we use it for MB865 ATT?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I tried to flash the MB865 rom , like those SCV7 roms, into my ME865 as long as it's a CWM flashable rom.
I do think you can make a trial but remember to make a backup and make sure your phone is bootmenu-installed.
*** Your phone must be already updated to any version of ICS ***

flash ?
one question for our DEVs
flashing this is GO or NO GO ?

shardul.phatak said:
one question for our DEVs
flashing this is GO or NO GO ?
Click to expand...
Click to collapse
Bootmenu has problems flashing large zips.
I could be wrong, but i think it's a no go.
Sent from my MB865 using xda premium

matt99017d said:
Bootmenu has problems flashing large zips.
I could be wrong, but i think it's a no go.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I haven't seen any confirmation that its fixed or not. Whirleyeyes is on vacation. So hold on until then.
Sent from my locked MB865 on Ice Cream Sandwich.

So if we don't have ics e can't get an ics ROM. I hate Motorola, they need to unlock the stupid bootloader already. this is why HTC and Samsung are better. I'm so impatient and have sent motorola emails yelling at them.

vujkovicv said:
So if we don't have ics e can't get an ics ROM. I hate Motorola, they need to unlock the stupid bootloader already. this is why HTC and Samsung are better. I'm so impatient and have sent motorola emails yelling at them.
Click to expand...
Click to collapse
There is a way to get an ics ROM onto our Atrix 2 phones. http://forum.xda-developers.com/showthread.php?t=1779968
Then you can use SCv7. http://forum.xda-developers.com/showthread.php?t=1648421

ok i flashed this on my indian atrix 2. was using sc7
warning:- try at ur own risk if it did't work or brick ur phone don't blame me
1)backup with boot menu custom recovery
2)wipe data and cache
3)flashed zip and reboot(it will erase bootmenu hijack but dont worry say goodbye to boot menu)
4)after system boots install bootmenu and install hijack again
:good::good:
first impression is very smooth, will reply if found any bug

I was under the impression boot menu couldn't flash large zips. Basically over 100 mb, much less than a rom. Give us a screeny.
Sent from my MB865 using Tapatalk 2

shamsud said:
ok i flashed this on my indian atrix 2. was using sc7
warning:- try at ur own risk if it did't work or brick ur phone don't blame me
1)backup with boot menu custom recovery
2)wipe data and cache
3)flashed zip and reboot(it will erase bootmenu hijack but dont worry say goodbye to boot menu)
4)after system boots install bootmenu and install hijack again
:good::good:
first impression is very smooth, will reply if found any bug
Click to expand...
Click to collapse
wifi work?

gvsukids said:
wifi work?
Click to expand...
Click to collapse
Build date?

xanadu said:
Build date?
Click to expand...
Click to collapse
i flashed with bootmenu
buid date is Aug. 7
wifi is working
Sent from my ME865

so finally do you recommend it to flash or not? if it has problem with boot menu,so how can we fix it?!

Black Metal said:
so finally do you recommend it to flash or not? if it has problem with boot menu,so how can we fix it?!
Click to expand...
Click to collapse
it ur choice dont blame me if something goes wrong, actually i am "flasholic" so i try to flash every rom "at my own risk".:thumbup:
Bootmenu can be installed once the rom boot
Sent from my ME865

Just a thought
why not use the system keeper option in boot menu instead of saying goodbye to boot menu
that way if something goes wrong you can still get into recovery

it may work
Sent from my ME865

Please clarify
Can someone lease tell me the prerequisites for this rom..
im seeing many comments to this thread and nothing of substance...
do u have to have some sort of ics leak already installed..
or can u just flash via cwm...
i dont have bootmenu installed..
so please anyone can you clarify this..
and list some sort of step by step....

Related

[ROM] 2.3.6 VictoryRom v1.1 Nothing Special.. It's Simple. 29/03/12

Disclaimer: I am not responsible for loss, damages or any other kind of issue that can arise from installing this ROM.
I'm not into overclocking + heavy Themes so I make my own Roms. Once I feel comfortable I post it (Removing all possible bugs). Like most of us, I like Mod's and extras. Thanks to all the dev's who worked on Mod's.
I'm sure some of you wanted something like this... I hope u enjoy. and yes everything works (GPS with CWM on Boot etc). I will be out of country for a month starting tomorrow. So ur on ur OWN. Guys please help each other. Thanks.
Based on 2.3.6
What is VictoryRom?
1. Deodexed, Zipaligned, ROOTED
2.Pull down notification settings
3.Build.prop tweaks
4.Droid Razr bootanimation
5.Beats Audio
6.Sony Bravia Engine
7.Lightly ICS Themed
8. Ad Block (host files). Personally I'm not into Ad block cos many Dev's create free apps cos of it.. But many users want Ad-Block so I added.
9. Few fonts from ICS.(Roboto as Default Font)
10. Extended WIFI Scan Interval to get more battery.
11.Webtop via HDMI
12. APN Lists (more added)
DOWNLOAD
Installation Instructions - THIS IS A INSTALL ZIP (NOT BACKUP)
1.Put zip on sdcard
2.Back Up apps with Titanium backup
3.Make CWM backup
4.Wipe DATA(Factory Format),WIPE Cache and WIPE dalvik cache
5.flash zip
Thank u all... If u want name next to your mod's let me know...BIG THANKS TO alteredlikeness For keeping Victory alive.
ScreenShots and Updates
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Files?
Sent from my MB865 using Tapatalk
smgulsby said:
Files?
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
Uploading...
Nice. Is this an "install zip" or a restore backup? Just wanna be clear.
Running RebelRom Beta 3
KEB64 said:
Nice. Is this an "install zip" or a restore backup? Just wanna be clear.
Running RebelRom Beta 3
Click to expand...
Click to collapse
Install ZIP.
KEB64 said:
Nice. Is this an "install zip" or a restore backup? Just wanna be clear.
Running RebelRom Beta 3
Click to expand...
Click to collapse
He said flash so im guessing not a restore.
Googler_1976 said:
Install ZIP.
Click to expand...
Click to collapse
Cool thank you!
Running RebelRom Beta 3
Sony bravias engine?
Is this debloated?
Sent from my MB865 using Tapatalk
If I'm correct zipaligned means you can flash it.
Atrix 2 / RebelRom V3
smgulsby said:
Is this debloated?
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
NO.. Freeze what u want from TB.
It looks very nice, I like the simplistic approach. Thanks for taking the time to work on this!
One thing I'd like to know about Bravia Engine: did you have to do anything to port it or did a ported version from another device work on the A2?
cogeary said:
It looks very nice, I like the simplistic approach. Thanks for taking the time to work on this!
One thing I'd like to know about Bravia Engine: did you have to do anything to port it or did a ported version from another device work on the A2?
Click to expand...
Click to collapse
It's supposedly makes pic's and video's make look better... Who knows. So I just threw them inside the rom. No Harm.
Good deal. I've ran your roms on the captivate and the infuse and they are good stable roms. I'll be flashing this once my a2 charges up. Thanks for making one for the a2.
Sent from my SAMSUNG-SGH-I997 using xda premium
EDITED- BEST ROM EVER. The issues I had must have been something weird. Bad download, shady install... I don't know. What I do know is the second time I installed this ROM its working beautifully. Appologies to the Dev. You obviously took your time with this. Great work! This is the first ROM I've used where I actually like the stock launcher. This ROM is very battery friendly and everything I've tryed so far works as advertised. Including CWM on boot + GPS.
Thank you Googler_1976! Very nice work!
Sent from my MB865 using Tapatalk
On the positive side... I like the notification screen, phone pad dialer, the whole system seems very smooth and quick. I might take another look at this when I have more time. Thanks for your efforts! You will make a lot of people happy with this.
@cogeary,
Thanks for the sequence on the Play Store. I'll give that a try next time I install this.
KEB64 said:
I think I like enough tor use. Couple things... Google play store keeps force closing. I deleted cache and data and I'm getting force closes still. I repaired permissions as well. CWM on boot doesn't appear to be working. Not sure why. Is the lockscreen supposed to have an almost double image of a lock and unlock? Seems like it shouldn't? Keyboard is throwing up weird images of keys and freezing spuratically. Sorry for my spelling.
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
Had to cancel download so I haven't been able to download and flash yet so I don't know about the lockscreen or keyboard. However, I know that the market/play store will FC if you flash /system without clearing data... to fix it just clear cache+data, uninstall updates, then leave it open for a minute or two to update.
How do you make roms? Do u use the android kitchen? Im interested in making (yet another) rom for the a2
cogeary said:
Had to cancel download so I haven't been able to download and flash yet so I don't know about the lockscreen or keyboard. However, I know that the market/play store will FC if you flash /system without clearing data... to fix it just clear cache+data, uninstall updates, then leave it open for a minute or two to update.
Click to expand...
Click to collapse
Did u come from blaze to this? Oh poop... wrong person. Ment for keb64. Sorry the gf was talking while I was typing
Bmatthews11 said:
How do you make roms? Do u use the android kitchen? Im interested in making (yet another) rom for the a2
Click to expand...
Click to collapse
This should be of some help to you.

[Q] How do i Know Which bootloader i'm on

maybe it's a stupid question... i'm gonna flash the new ICS Room but i dont want to see any rainbow..
actually i'm using ZTR rom... i installed it from froyo stock..
which bootloader i have?..
Suggestion since your not familiar with what your bootloaders are...do some reading...
and since ics is still being in the delivery room not born yet....
Do some homework...
If you flashed the ICS kernel and you are seeing rainbow recovery, then you are on Froyo bootloaders.
What carrier
Sent from my SGH-I997 using xda premium
i've not flashed ICS yet, it's from att.. i'm not familiar with what bootloaders are.. according to some things I've read i know this is what "SAYS" kernel what to load until phone starts.. but when i updated froyo to GB with zeus 6 and then ZTR i did not do anything about bootloader just installed a 3e modded recovery and i could flash it well!! i've even got back to stock froyo using odin
froyo stock to ztr means that you most likely are on froyo bootloaders.
Simply flashing a ROM wont update you bootloaders. The easiest way to update bootloaders is through Qkster's Heimdall from my experience. As far as Roger's goes I believe their stock Bootloaders are GB. I am not 100% sure of this, but I believe that is correct.
Take a pic of what your phone looks like in download mode so I can determine whether or not you have gingerbread bootloaders
Sent from my SGH-I997 using xda premium
theaductiv
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the image what looks like in recovery mode.. i could take a photo of my phone so i googled one exactly the same.. also mine show at top of the screen
Custom Binary Download : NO
Current Binary : Samsung Official.. i think i'm on froyo BL.. i'll wait a lil ultil i know how to get GB BL so then i will flash ICS.. Thank you so muchh!!
Use heimdall to flash bootloaders-put phone in downloaded mode connect to PC run heimdal and flash bootloaders
Sent from my SGH-I997 using XDA
MaliciousIntent69 said:
Simply flashing a ROM wont update you bootloaders. The easiest way to update bootloaders is through Qkster's Heimdall from my experience. As far as Roger's goes I believe their stock Bootloaders are GB. I am not 100% sure of this, but I believe that is correct.
Click to expand...
Click to collapse
either qkster's or AdamOutler's back to stock will install GB bootloaders.
None of the custom ROMs have bootloaders built-in, only kernels, modems and such are built in.
Qkster's Hemidall is the easiest I've found. You need to flash the rom first before the checkbox to install bootloaders is available. Then check the box and flash again.
Use hemidall 1 click back to stock uclb3...tick on "install bootloaders" (if the option cannot be ticked flash the the stock rom anyway but leave the hemidall program window open, ensure the phone is has booted uo completely then go back into download mode and then you should be able to tick it and flash over the stock rom together with gb bootloaders) ..then flash entropy dd to get cwm and root with super one click...
Sent from my SGH-I997 using xda premium
quikvzla said:
maybe it's a stupid question... i'm gonna flash the new ICS Room but i dont want to see any rainbow..
actually i'm using ZTR rom... i installed it from froyo stock..
which bootloader i have?..
Click to expand...
Click to collapse
Is it really that bad to see the rainbows? Unlike previous Gingerbread kernels on Froyo bootloaders without the rainbowfix, recovery is semi-usable.
If you get the rainbows, you need to flash. If you don't get the rainbows, you don't need to. Best to check if you need the BLs first.
That said, what you've stated so far makes me think you're probably on Froyo BLs.
I also want to know what BL I'm on. I bought the infuse already rooted and running Zeus build 6 v2. I'm also wanting to flash an ICS Rom soon and don't want to brick cause I have to pc.
Sent from my SAMSUNG-SGH-I997 using XDA
popi09 said:
I also want to know what BL I'm on. I bought the infuse already rooted and running Zeus build 6 v2. I'm also wanting to flash an ICS Rom soon and don't want to brick cause I have to pc.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
If you follow the direction on Entropy512 post, look at post 3 regarding bootloaders..... Read all op post 1-3 then read again...ok stay in that thread once you decided to run the ROM, any questions the fellow thread user will help, ok
http://forum.xda-developers.com/showthread.php?t=1601844
So I guess I'm on the gingerbread firmware since my CWM is red? Sorry for all the questions, just don't want to brick lol.
Sent from my SAMSUNG-SGH-I997 using XDA
Your on froyo boot loaders... just use Odin... flash the uckk4 leak... then the community kernel to get cwm.. sound like yo really don't know what your doing, so using hemidal might not work for you.. the UCKK4 leak will give you boot loaders... then flash jts custom recovery to flash ics....
popi09 said:
So I guess I'm on the gingerbread firmware since my CWM is red? Sorry for all the questions, just don't want to brick lol. Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Ok if really want to attempt this do some reading...i suggest using this thread link below ...no extra flashing with diff files it's setup to use one file to flash first and to flash with same file again..read the OP then reread...plus the support if needed is here...your call...
http://forum.xda-developers.com/showthread.php?t=1601844
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
popi09 said:
So I guess I'm on the gingerbread firmware since my CWM is red? Sorry for all the questions, just don't want to brick lol.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
No that has nothing to do with bootloaders.
Seriously, don't **** with them unless you've confirmed you need them by actually seeing the rainbows.

[Recovery][MTD] CWM Touch 6.0.1.0 10/19/12

Clockwork Mod Touch for the Epic 4G!!!!!!!!!!!!!!!!!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everything I used to create the Zip is in here: http://d-h.st/zIL
I used unpack-bootimg.pl (I forget where that came from) to unpack an existing CWM Touch recovery.img from the Nexus S 4G
Then, I unpacked an existing boot.img from our device using zman0900s tools here: http://forum.xda-developers.com/showthread.php?t=1405284
Then, I added the etc/recovery.fstab and the default.prop from the epic to the nexus s 4g's recovery img.
Then, I repacked using a modified tool I made based on nubecoder's boot.img repack tools: https://github.com/nubecoder/create_boot.img
Then, I added the newly made ramdisk-recovery.img to Dees_Troy's TWRP zip.
Instructions:
Just flash this zip in any MTD recovery: http://d-h.st/Wfq and enjoy the new recovery after you go to advanced>reboot recovery
Unfortunately, due to the way our boot.imgs are packed, this recovery will be replaced when you install a new kernel or ROM, but the recovery replacement does not occur until you reboot recovery, so all you have to do is flash whatever you were flashing, then flash the CWM Touch zip and then recovery will stay.
On stock touchwiz ROMs, flash this modified version of Shadow Kernel that includes the recovery
http://forum.xda-developers.com/attachment.php?attachmentid=1419586&d=1350836408
There are probably other ways to build the recovery, but none of them worked for me... not Koush's Builder and not building from source
Anyone can add this recovery to their kernel by extracting a boot.img using zman0900s tool, then adding my initramfs_cwm folder in the build script zip at the beginning of my post, then repack using nubecoder's tool.
Thanks to Koush for CWM
Thanks to our CM team for the device specific files I pulled to make this possible
Thanks to Dees_Troy for his TWRP zip I based this on
Thanks to nubecoder for his create boot image zip
Thanks to zman0900 for his extract boot image zip
First. About to try now. Thanks for this.
Sent from my SPH-D700 using xda premium on cm10 nightly
Second. Been waiting for this for a long time. Thanks Xbox
Sent from my SPH-D700 using xda app-developers app
softbricked
...
Successfully worked on my phone.
Sent from my SPH-D700 using xda app-developers app
Weird that it softbricked you. It worked fine for me. I wouldn't have posted it otherwise. Try again after you odin stock.
Thanks a million for this xbox! Been waiting a long time to see a touch cwm!
Sent from my Epic4G using xda developers premium[HD] app
No problem guys.
*Ahem* I'd like to file a complaint if you will. I flashed this and my phone stole my little sister, and obviously since you put no disclaimer in this thread I'd like to formally blame you.
Can't wait to get the new epic... an awesome ex epic owner may be sending me his for free... I know what recovery I will be using! Thanks Xbox!
AproSamurai said:
*Ahem* I'd like to file a complaint if you will. I flashed this and my phone stole my little sister, and obviously since you put no disclaimer in this thread I'd like to formally blame you.
Click to expand...
Click to collapse
Still better than your sister stealing your phone...
xboxfanj said:
Still better than your sister stealing your phone...
Click to expand...
Click to collapse
I would like to officially 2nd this statement!
Heh, good work Jake. I'm sure people will greatly enjoy this.
Great job Jake..Didn't think we would ever see this. So where this is based off of twrp, would it be possible to create an inject.cwm file like twrp has so there is an option to re inject after a flash?
Sent from my SPH-D700 using Xparent SkyBlue Tapatalk 2
Thank you xbox, good works
no soft brick issue in here and works fine
Sent from my SPH-D700 using xda premium
Took an hour to redo my phone. At theater to see paranormal activity 4. Will re flash when I get home. I don't know why it soft bricked. I really want cwm touch. All I did was flah the zip. No rom update or anything else. But all the positive comments from everyone else gives me hope. But just in case I will re download in case it was a bad dl.
Sent from my SPH-D700 using xda premium
Jmax0420 said:
Took an hour to redo my phone. At theater to see paranormal activity 4. Will re flash when I get home. I don't know why it soft bricked. I really want cwm touch. All I did was flah the zip. No rom update or anything else. But all the positive comments from everyone else gives me hope. But just in case I will re download in case it was a bad dl.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
So want to see that movie... im jealous... and ya I would have to say it was probably a bad download seens how nobody else has had a problem... anyways goodluck and enjoy the movie!
Uhhhhhhhhhhh... I was waiting too long for this "touch", then I hopped onto TWRP days ago AND deleted ALL but one CWM backup... and here's the long-awaited touch but aww... Since TWRP everything's a hell lot easier but lost that sense of geek...
PLUS: Would like to report that TWRP does not work with "Stock FC09 Prerooted MTD", stuck at the Samsung logo too. If same phenomenon here, I guess it's that InjectTWRP won't work with stock kernels (CM and other kernels based on CM are all fine) ... @xboxfanj interested in the issue?
Sent from Nokia N900 w/ Android 2.3.7
Jmax0420 said:
Took an hour to redo my phone. At theater to see paranormal activity 4. Will re flash when I get home. I don't know why it soft bricked. I really want cwm touch. All I did was flah the zip. No rom update or anything else. But all the positive comments from everyone else gives me hope. But just in case I will re download in case it was a bad dl.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Yeah thats the problem. You need to be on an mtd rom. So, Odin stock then cwm, then flash any cm rom, then flash this cwm.
Sent from my GT-P7510 using Tapatalk 2
xboxfanj said:
Yeah thats the problem. You need to be on an mtd rom. So, Odin stock then cwm, then flash any cm rom, then flash this cwm.
Sent from my GT-P7510 using Tapatalk 2
Click to expand...
Click to collapse
"God damn it, Gump! You're a god damn genius! This is the most outstanding answer I have ever heard. You must have a goddamn I.Q. of 160. You are goddamn gifted, Private Gump!"
Substitute "Xbox" for "Gump" and you've got it. Jake, your genius is truly amazing and inspirational.Thank you...

guide and review of official JB {UPDATED}

IT WAS NEVER AND WILL NEVER E FOR ATT PHONES
WAIT FOR THE DEVS TO CRACK IT UP ......... :crying:
NOW FOR ASIA and other non att phones there is good chance of flashing it !!
DOWNGRADING TO ICS IS CONFIRMED FOR NON ATTS {THANX A LOT STOLENPRECIOUS FOR CONFORMATION }
ROOTING WORKS (found one )
THREAD http://forum.xda-developers.com/showthread.php?p=36576365#post36576365
Click to expand...
Click to collapse
I am not taking responsibility of ur phone save it urself !!
thought of giving the review as i am good at that only !!
first i am on indian att that is searet rom is our main rom
for all asian user flash it without the fear of ur cid number it does not cause a ny harm i have tested it it is working
just flash it using fastboot and if any fc occurs do a factory reset from stock recovery:::::
REVIEW
THIS IS THE ONLY UPTO MARK ROM CREATED BY MOTO ITS BADASSS!!!
ADVANTAGES ::ALL THE JELLY BEAN GOODNESS WITHOUT THE CAMERA AND ORIENTATION GLITCH
INTERNAL STORAGE INCREASED TO 6GB!!!!
HAS TWO CAMERA APPS STOCK JB 4.1 AND THE CAMERA APP WE USE IN CM10
WHAT ELSE U NEDD HA??!!
dISADVANTAGES :CANNOT BE ROOTED NOW (checking)
NOT FOR ATT
HERE ARE SOME PICS (I LIKE THIS KILLER WALLPAPER GIVEN WITH LAUNCHER HAHAHA)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(SCREENSHOTS SAVED AS PNG )
HOPE THIS WAS HELPFULL AND ENJOYABLE
I THINK U SHOULD WAIT TILL SOMEONE ROOTS IT UP
HIT THANKS IF I HELPED U ?
:highfive::laugh:
OMG! Thank you for the screens and for this thread. I'm charging the battery now, and then i'll flash it
REPLY
nothing here
Oh, i forget. I bought my phone in Argentina. Do i need to flash it with or without cdt.bin and bootloader?
And, the camera isn't working yet? :|
brianmoyano said:
oh, i forget. I bought my phone in argentina. Do i need to flash it with or without cdt.bin and bootloader?
And, the camera isn't working yet? :|
Click to expand...
Click to collapse
camera is working good all good but i think if u want t returrn to ics later then do not flash cdtbin and bootloader
answersamir said:
camera is working good all good but i think if u want t returrn to ics later then do not flash cdtbin and bootloader
Click to expand...
Click to collapse
Oh, okey. But, if this works well i don't have the necesity to go back to ics.
And, how do i not flash those archives?
I have to delete them from the folder?
brianmoyano said:
Oh, okey. But, if this works well i don't have the necesity to go back to ics.
And, how do i not flash those archives?
I have to delete them from the folder?
Click to expand...
Click to collapse
then u r free to flaash it bro use rsd lite and join the army !!!!
if u want to know how to exclude it jus search fatboot commands
in fastboot there are specific commands for specific files to be flashed like for boot img we type
motofastboot flash boot boot.img
Click to expand...
Click to collapse
etc etc just google it
answersamir said:
then u r free to flaash it bro use rsd lite and join the army !!!!
Click to expand...
Click to collapse
A final review to know that what I'm going to do will not damage my phone.
I open RSDLite and then select the file. Xml, right?
Then I connect my phone in Apfastboot mode and then i select 'start'?
brianmoyano said:
A final review to know that what I'm going to do will not damage my phone.
I open RSDLite and then select the file. Xml, right?
Then I connect my phone in Apfastboot mode and then i select 'start'?
Click to expand...
Click to collapse
correct if ur non att u will not damge phone and yes what u said is correct
answersamir said:
correct if ur non att u will not damge phone and yes what u said is correct
Click to expand...
Click to collapse
Now i'm running Jelly bean
Thx bro :laugh:
brianmoyano said:
Now i'm running Jelly bean
Thx bro :laugh:
Click to expand...
Click to collapse
No probes bro good luck
Sent from my ME865 using xda app-developers app
Maybe Jim might wanna take his phone back...
Sent from my U8160 using xda app-developers app
Is webtop still there?
Sent from my stock rooted ATRIX 2
built in drop toggles & no carrier info is better work from moto
can u upload more screenies :silly:
shardul.phatak said:
built in drop toggles & no carrier info is better work from moto
can u upload more screenies :silly:
Click to expand...
Click to collapse
Sure bro wait some time
Sent from my ME865 using xda app-developers app
this is awesome...
I think non att users can flash back to ics since the CDT secure version is same
6.7.2_EDEM-18-SEARET_cfc.xml ( ICS)
fastboot-p3_edison-edison-user-4.1.2-6.7.2_GC-384-402-release-keys-Retail-05_hktwn (jelly bean)
Where is download link?
anand.parmar said:
Where is download link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2092107
Someone in the dev thread says that a rooting method worked.. Can someone check it out and test it?
Sent from my MB865 using Tapatalk 2

[ROM][4.3][jwr66v]master-NEXUS1.3 with root[01/09] lots of new changes!

MASTER NEXUS ROM FOR NEXUS 7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
master-NEXUS 4.3 1.3 now available!
features of master nexus
base on stock android 4.3 jwr66v
amazing transition animation
include root
including m-kernel
stock like
super speed very fast amazing benchmark! 15622 on antutu
overclocked
custom boot animation
battery percentage
mms &sms
dsp manager
include gapps
fully deodexed
Zipaligned APKs
signed
smooth
amazing battery life!!!!
feels very clean
if u like my work and own galaxy s2 check this
if u found a problem let me know
for all my work go here
whats new in 1.3?
deodexd
battery percentage
mms &sms
updated kenrel
dsp manager
boot animation fix
updated gapps
and more
checking the beta 3 for errors now
MASTER NEXUS 4.3 1.3 beta 2 with battery percentage HERE
MASTER NEXUS 4.3 1.3 beta 1 HERE
MASTER NEXUS 4.3 1.2 HERE
how to install
not sure yet but for now must come from android 4.3
if you are not coming from android 4.3 flash this first THIS
if u dont have recovery flash THIS
place rom on sd card
reboot to recovery
nandroid!
if you are coming from master-nexus skip this step
DO NOT WIPE SYSTEM!
if u wipe system device will keep reboot to recovery!
wipe data factory reset (recomended)
install MASTER-NEXUS 4.3.ZIP
if asking to fix root click yes
reboot device
bootloader is just a white screen for now so dont worry.
fix root
enjoy
screenshots
please dont forget to hit the thanks button
credits: Spannaa
kubino99
google
xda guides
all xdas user
kRt_uK
android kitchen creator
Wow, this one is fast, will try this one! Thanks to the dev!!!
Sorry, this even does not boot for me. It says it needs to fix root permissions, does not work w/ or w/o. Always returns back to TWRP.
Do u have tilapia or grouper?
Sent from my GT-I9100 using xda app-developers app
Are u coming from 4.3?
Sent from my GT-I9100 using xda app-developers app
Tilapia, comming from 4.2 XenonHD.
Should upgrade to 4.3 first? (Was not mentioned in install instructions)
Sent from my Nexus 7 using xda premium
fdebef said:
Tilapia, comming from 4.2 XenonHD.
Should upgrade to 4.3 first? (Was not mentioned in install instructions)
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
yeah u should come from 4.3 sorry my bad..
So I downloaded this and can't install on my nexus tablet unless I have stock 4.3?
Sent from my LG-P925g using xda premium
feralcat said:
So I downloaded this and can't install on my nexus tablet unless I have stock 4.3?
Sent from my LG-P925g using xda premium
Click to expand...
Click to collapse
im not sure i havnt test it yet on m nexus 7 but flashing stock 4.3 is very easy just flash this
but then again u can just do a nandroid check if it works when u coming from 4.2.2 and let me know
i was on stock 4.3 (no root), flashed your rom and got every single error possible, keyboard error, CPU something error, and on on... and i cant go to the main screen cuz i don't have keyboard to put my router pass.... nice try, but make sure you do your test before posting the rom.
and i flashed 4.3 stock again and this time didn't do any wipe and flashed your rom, same problem.
so far so good.
Works fine,got a fc on an app on first boot.other than that its fine.
Would like to change nav bar icons but great work.
FYI murders quadrant!!!!
Vidati said:
i was on stock 4.3 (no root), flashed your rom and got every single error possible, keyboard error, CPU something error, and on on... and i cant go to the main screen cuz i don't have keyboard to put my router pass.... nice try, but make sure you do your test before posting the rom.
and i flashed 4.3 stock again and this time didn't do any wipe and flashed your rom, same problem.
Click to expand...
Click to collapse
did u wipe data?
i will chek it out.
for me it was
coming from 4.3 stock rooted
reboot recovery
wipe data/factory reset
install rom
reboot
fix root
p.s how did u install the rom without root?
Already have backup. When I get hone from hobnail give it a go and see. Will let you know if it worked or not
Sent from my Carbonized Infuse G4. I think therefore I Droid.
feralcat said:
Already have backup. When I get hone from hobnail give it a go and see. Will let you know if it worked or not
Sent from my Carbonized Infuse G4. I think therefore I Droid.
Click to expand...
Click to collapse
thanks
Thank you for your work :good:
Flashed 1.1 version via trwp on wiped device
My nexus only shows white screen instead boot animation (no problem for me) ,and installed no-frills via marketplace to get it working
Can i make request for wifi usb bluetooth theter for this rom ?
best regards
How to install
How to install this rom?i have flash it but it always back to TWRP after finished flashing. and i have upgrade my bootloader and radio to 4.3. please help me...
:crying:
It's working very well for me from Stock JB 4.3 with updated radio and bootloader. Updated the No Frills CPU via playstore and all working fine. Thanks dev.:good:
ganjar1989 said:
How to install this rom?i have flash it but it always back to TWRP after finished flashing. and i have upgrade my bootloader and radio to 4.3. please help me...
:crying:
Click to expand...
Click to collapse
did u come from android 4.3?
did u wiped data?
if u wipe system it will keep reboot to recovery
so u need to flash stock 4.3 and then withoud system wipe only data wipe flash the rom
ganjar1989 said:
How to install this rom?i have flash it but it always back to TWRP after finished flashing. and i have upgrade my bootloader and radio to 4.3. please help me...
:crying:
Click to expand...
Click to collapse
If u have problems install stock 4.3 rom nakasig-jwr66v-factory-aebc7b11.tgz via fastboot
boot and single run it (check if u have 0409 radio and 4.3 boot but you should) .... copy master-pin on internal memory
flash CWM or TWRP & flash master-pin zip wipe dalvik & cache
uploading new version right now

Categories

Resources