Database Info

[ROM] Samsung GFit Gingerbread 2.3.4 new version (29th July)

I'm not sure if this is the right forum for posting this but yeah, if it's wrong feel free to delete :3
Was wandering on Samfirmware.com, found out that a new update for Samsung Gfit gingerbread (S5670XWKQ2) has just been released, i installed it and wow:
- Much Snappier
- Option to turn off mobile data in the "shutdown" menu (under the flight mode)
- Option for 2G Only OR 3G only Mode (in wireless networks options)
- Much MUCH better reception, the phone gives me good reception on 3G mode and it STICKS there, not randomly snapping between 2g, edge & 3G.
-OH and the recovery screen works on this one too (power + home + volume down)
-Slightly Better connected letters for the Arabic language, idk maybe it's just me o.o
-It seperates the phone numbers now (example 0777480209 becomes 077-7480-209 But that only worked on an Incoming/Outgoing Call).
-A "Traffic Widget" that asks you to enter a specific destination, idk what this does o,o.
-anything else tell me :3
you can get it here http://www.samfirmware.com/WEBPROTECT-s5670.htm (S5670XWKQ2 in the europe firmwares owo)
====Installation instructions====
0 - Connect your Phone in "Download" Mode (By turning off the phone, clicking the Power Button + Home button + Volume down button).
1 - Download the file from the above page.
2 - extract to a folder using the password Provided on the site (idk if i can provide it here o.o)
3 - you'll get two files, a .Dll and a .Tar, keep it like this, don't get nosy and rename/extract anything, keep them in the file.
4 - Run ODIN multi downloader, and load up a .OPS file for your phone.
5 - Select "One file package" from ODIN and in look waaay down, there's the one package selector, click it and browse to the .Tar file you got earlier, and click it.
6 - Once you made sure everything is in place, click start and it should take no longer than 3-5 minutes and you're done
7 - once done, the phone will restart and may take a while to start up, this is normal, go to settings, change the language and you're ready to go.
Boot into recovery mode, clear the cache partition, then Enjoy.
This is GingerBread 2.3.4 S5670XWKQ2
Any questions feel free to ask <3

What to do with .dll file
Sent from my GT-S5670 using Tapatalk

raj3534 said:
What to do with .dll file
Click to expand...
Click to collapse
Don't do anything with it, just keep it in the same folder with the .Tar file and just flash the phone using the .tar hope that helped <3

this rom supported arabic ????

ahmedadam said:
this rom supported arabic ????
Click to expand...
Click to collapse
Well it seems to connect the letters better, but no, not yet, wait for the next updates

thank youu

a eror when i turn on and in recovery mode say can't acces to ?system csc/ser/system what i do?

help........
after i update it is sayin process com.sec.android.ugl has stopped unexpectedly , please try again
d nly option is force close
when i select it , it is repeating

does exist ClockworkMod Recovery for s5670 i want kitchen themes

kannegantiaditya said:
after i update it is sayin process com.sec.android.ugl has stopped unexpectedly , please try again
d nly option is force close
when i select it , it is repeating
Click to expand...
Click to collapse
first go in recovery mode in do a reset factory and install agin this rom

kannegantiaditya said:
after i update it is sayin process com.sec.android.ugl has stopped unexpectedly , please try again
d nly option is force close
when i select it , it is repeating
Click to expand...
Click to collapse
i got that too the first time, easily solved.
Flash the S5670XXKPI here http://hotfile.com/dl/120301527/b900a23/S5670XXKPI.rar.html First, Reboot into recovery and clear the cache partition, and then flash the new Firmware and clear the cache.
That should do it

no themes for samsung fit S5670XWKQ4 gingerbread?

(FIRMWARE) latest chinese firmware 2012 July

Here are d steps
to UPGRADE to "OFFICIAL LATEST CHINESE FIRMWARE..
1.DOWNLOAD S5670ZCKPA_S5670OZHKPA_CHN.zip PROVIDED AT THE END..
2. Extract d downloaded file (by right
click on file , n clicking extract )
3. You will get one (.tar) File after
Extracting and that will be your one
package file in odin....
4.download odin and beni.ops(google it or u must be having of any other firmware )
5. Power Off your phone and
Remove memory n sim card .
6. INSERT the BATTERY & Now start
the phone in downloading mode by
these keys Volume Down + Menu Key
+ Power Button .
7. In your PC open "ODIN" and
check "One Package Option" .
Then select BENI_OPS under the
option OPS.
Select .tar(the one you got after extraction under the
option One Package .
8. Now connect your phone to the
PC via the USB.
9. When You see the Colour of COM
PORT MAPPING (in odin)
has changed to "Yellow" click START.
10. TIMER will start n Wait for almost
5 minutes .. till "PASS" comes
written n color changes to BLUE.
( do not disconnect your phone tilll
"pass" comes)
11. REBOOT .. n You have sucessfully install latest chinese firmware..
DOWNLOADING LINK...
CHINESE FIRMWARE http://www.hotfile.com/dl/164175817/341d94a/S5670ZCKPA_S5670OZHKPA_CHN.zip.html

No need to post this in dev section

i posted this on galaxy fit facebook group last night

Avilove.Cullen said:
No need to post this in dev section
Click to expand...
Click to collapse
so where to post???

samo_gf said:
i posted this on galaxy fit facebook group last night
Click to expand...
Click to collapse
but i got this from samfirmware website..

ajssdroid said:
so where to post???
Click to expand...
Click to collapse
In general section ... this has nothing to do with development .. !!
Press Thanks on getting Helped by me

Avilove.Cullen said:
In general section ... this has nothing to do with development .. !!
Press Thanks on getting Helped by me
Click to expand...
Click to collapse
oh sorry..

Ok so gapps will dey work as its chinese firmware

One question guys..
In dxkt7 dx is Indonesian code and kt7 is firmware same way zckp1 zc is Chinese code and kp1 is firmware
Kt7 shud be the advanced one..no?
Sent from my GT-S5670 using xda app-developers app

has anyone flashed this firmware ?
is there any major update ??

[ROM][STOCK][JB] Spice Stellar Mi-1010 tablet pad original factory firmware flash

***********************
this is probably the 1st time u guys r seeing ORIGINAL firmware+flasher+driver for any indian branded local device... lol... since i bought this device myself, am gonna get the max out of it
***********************
package has been linked directly from my server. supports resume and multi-part downloading... but i donno hw long i can keep it... so if som1 can fetch it to multiple file sharing sites & create some mirrors, it'll b great... but pls DONT modify the RAR in any way, respect my work + it might corrupt the FW
http://desi.info.tm/spice.mi-1010/sadhu.spice.Mi-1010.stock.FW.rar
rar pass -> sadhu
******* alternate url ******
http://125.19.68.27:8084/website/MI-1010_Stellar_Pad.zip
***********************
switch off mi-1010
run device manager on PC & keep an eye
press POWER + VOL UP -> wait 2 sec -> plugin USB -> wait 2 sec -> release POWER + VOL UP
screen should remain black
if driver installed -> rk30 device will pop up in device manager
if driver not installed -> unknown device will pop up in device manager -> double click -> update driver -> direct it to the correct sub-folder in /RockusbDriver
*** win8 flashing-driver installation -> http://www.youtube.com/watch?v=BbFpvMj7iyc
once rk30 device detected, run RKBatchTool (1 will be GREEN), choose update.img & hit UPDATE
after successful update, rk30 will vanish (device reboot) -> pull out usb immediately
***********************
see my other post to correctly root spice mi-1010
***********************
btw, the least u could do in return is to hit the THANKS button
***********************

How is this tablet?
Mine is coming in 2-3 days.

lekhwani said:
How is this tablet?
Mine is coming in 2-3 days.
Click to expand...
Click to collapse
Its great actually. Beautiful screen. Beautiful touch. Apps can b moved to sd utilizing the whole 16gb. Processor utilizes the whole spectrum upto 1.6gig. Wifi/battery gr8.
Antutu score 11500 . ..
I Thought am gonna regret somthing or the other but till nw nothing

Hi Sadhu,
First of all thanx for all your efforts. I'm getting one delivered in a couple of days as well and am really confused about one thing. Does it or does it not have GPS? Some sites mention it in the specs, some don't. I even asked the saholic guy when I got the call to confirm my order, he said yes.
Then someone who got it recently said it does not! So what is the deal, is there an inbuilt GPS antenna? Or does it just make do with some kind of wifi/network assisted location approximation?
I also heard playstore does not recognize this tablet? Any other points we should be aware of?
Thanx again.
BTW, you're probably going to see a sudden spurt of activity on your mi-1010 threads since a lot of people seem to getting it at the new bargain basement price!

itsnotmeatall said:
Hi Sadhu,
First of all thanx for all your efforts. I'm getting one delivered in a couple of days as well and am really confused about one thing. Does it or does it not have GPS? Some sites mention it in the specs, some don't. I even asked the saholic guy when I got the call to confirm my order, he said yes.
Then someone who got it recently said it does not! So what is the deal, is there an inbuilt GPS antenna? Or does it just make do with some kind of wifi/network assisted location approximation?
I also heard playstore does not recognize this tablet? Any other points we should be aware of?
Thanx again.
BTW, you're probably going to see a sudden spurt of activity on your mi-1010 threads since a lot of people seem to getting it at the new bargain basement price!
Click to expand...
Click to collapse
NO gps hardware
NO bluetooth
playstore recognises the device just fine, but some games dont recognise the device but who cares, they run just fine... i've installed & played very hardcore games which i didnt expect to run....
max payne
spiderman
dark knight rises
iron man 3
fifa 2013
real football 13
nfs..... so & so..... total i got about 10 hi-end games (1gb+ each) tat ate the whole 16gb.... the only sad part bout the whole mi1010 experience is tat "i suck" in gaming but i lov to hav hi-end games installed, just incase

sadhu_s60 said:
NO gps hardware
Click to expand...
Click to collapse
:crying:

whatsapp
how to install whatsapp on this tab ?
have tried applications like allwinner mod and app guard but didnt work

knuckleduster said:
how to install whatsapp on this tab ?
have tried applications like allwinner mod and app guard but didnt work
Click to expand...
Click to collapse
u need another ROOTed android PHONE
u need to ROOT mi-1010
TITANIUM BACKUP (free app) from play store
u need to follow this step by step guide EXACTLY as given
1. install & activate whatsapp on another rooted droid phone
2. install TITANIUM BACKUP on the same
3. thru titanium, backup whatsapp (incase it asks, choose app+data)
---> MUST UNINSTALL whatsapp from phone @this stage
4. copy the backed up (3 files) to mi-1010
5. install TITANIUM BACKUP in mi-1010
6. with titanium, RESTORE the backup up whatsapp (app+data) to mi-1010
---> enjoy whatsapp on mi-1010
--------------------------------
pls dont ask me HOW to use titanium, its not rocket science... visit titanium backup's play store page for that

Enjoying mine immensely.
Sent from Tapatalk 2

sadhu_s60 said:
u need another ROOTed android PHONE
u need to ROOT mi-1010
TITANIUM BACKUP (free app) from play store
u need to follow this step by step guide EXACTLY as given
1. install & activate whatsapp on another rooted droid phone
2. install TITANIUM BACKUP on the same
3. thru titanium, backup whatsapp (incase it asks, choose app+data)
---> MUST UNINSTALL whatsapp from phone @this stage
4. copy the backed up (3 files) to mi-1010
5. install TITANIUM BACKUP in mi-1010
6. with titanium, RESTORE the backup up whatsapp (app+data) to mi-1010
---> enjoy whatsapp on mi-1010
--------------------------------
pls dont ask me HOW to use titanium, its not rocket science... visit titanium backup's play store page for that
Click to expand...
Click to collapse
Oops I was looking for a method which doesn't require root, anyways thanks a lot for detailed method, it will be helpful for me in future of I root it

knuckleduster said:
Oops I was looking for a method which doesn't require root, anyways thanks a lot for detailed method, it will be helpful for me in future of I root it
Click to expand...
Click to collapse
dude, mi-1010 is pre-rooted (see my post to root it).... doesnt void warranty in any way

sadhu_s60 said:
dude, mi-1010 is pre-rooted (see my post to root it).... doesnt void warranty in any way
Click to expand...
Click to collapse
ok thanks bro ,will try it ,but no data will be lost right or should i take a backup ?
---------- Post added at 05:53 PM ---------- Previous post was at 04:59 PM ----------
sadhu_s60 said:
dude, mi-1010 is pre-rooted (see my post to root it).... doesnt void warranty in any way
Click to expand...
Click to collapse
TO Root the tab i did as directed but it didnt work for me ,super su app is asking "supersu needs to be updated" when i tap on continue it asks normal or TWRP/CWM , if i click normal it says intallation failed if i tap on TWRP/CWM it says to reboot when i reboot ,nothing happens ,please help

knuckleduster said:
ok thanks bro ,will try it ,but no data will be lost right or should i take a backup ?
---------- Post added at 05:53 PM ---------- Previous post was at 04:59 PM ----------
TO Root the tab i did as directed but it didnt work for me ,super su app is asking "supersu needs to be updated" when i tap on continue it asks normal or TWRP/CWM , if i click normal it says intallation failed if i tap on TWRP/CWM it says to reboot when i reboot ,nothing happens ,please help
Click to expand...
Click to collapse
in tat case, obv the rooting didnt happen... did the rooting script go thru the entire process without any error? its an interactive script
since its a one time thing, i wud suggest u backup yr data, flash the stock rom given in one of my posts & do the rooting straightaway. then u restore data & all tat..... & dont b scared bout rooting, its mostly hype, nothing will go wrong on its own just because its rooted

sadhu_s60 said:
in tat case, obv the rooting didnt happen... did the rooting script go thru the entire process without any error? its an interactive script
since its a one time thing, i wud suggest u backup yr data, flash the stock rom given in one of my posts & do the rooting straightaway. then u restore data & all tat..... & dont b scared bout rooting, its mostly hype, nothing will go wrong on its own just because its rooted
Click to expand...
Click to collapse
no , after connecting tab when i click on root file a dos windows opens and ,it say "The application has failed to start because its side-by-side configuration is incorrect . Please see the application event log or use the command -line sxtrace.exe tool for more details .
If the id is 0 / root then continue , otherwise cntl +c to exit
Press any key to continue "
Do i have to install that adb.exe application in folder "sadhu.mi1010.may.2013" ?
Also in that firmware flash procedure ,when after switching off i press volume up and power off keys ,nothing happens

sorry i was out of country with limited internet. hope yr prob is fixd by nw

sadhu_s60 said:
***********************
this is probably the 1st time u guys r seeing ORIGINAL firmware+flasher+driver for any indian branded local device... lol... since i bought this device myself, am gonna get the max out of it
***********************
package has been linked directly from my server. supports resume and multi-part downloading... but i donno hw long i can keep it... so if som1 can fetch it to multiple file sharing sites & create some mirrors, it'll b great... but pls DONT modify the RAR in any way, respect my work + it might corrupt the FW
http://desi.info.tm/spice.mi-1010/sadhu.spice.Mi-1010.stock.FW.rar
rar pass -> sadhu
******* alternate url ******
http://125.19.68.27:8084/website/MI-1010_Stellar_Pad.zip
***********************
switch off mi-1010
run device manager on PC & keep an eye
press POWER + VOL UP -> wait 2 sec -> plugin USB -> wait 2 sec -> release POWER + VOL UP
screen should remain black
if driver installed -> rk30 device will pop up in device manager
if driver not installed -> unknown device will pop up in device manager -> double click -> update driver -> direct it to the correct sub-folder in /RockusbDriver
*** win8 flashing-driver installation -> http://www.youtube.com/watch?v=BbFpvMj7iyc
once rk30 device detected, run RKBatchTool (1 will be GREEN), choose update.img & hit UPDATE
after successful update, rk30 will vanish (device reboot) -> pull out usb immediately
***********************
see my other post to correctly root spice mi-1010
***********************
btw, the least u could do in return is to hit the THANKS button
***********************
Click to expand...
Click to collapse
Hey I am not able to install the drivers I am getting error as - the hash for the file is not present in the specified catalog file....
Help me out...
Sent from my MB865 using XDA Premium 4 mobile app

mithun23 said:
Hey I am not able to install the drivers I am getting error as - the hash for the file is not present in the specified catalog file....
Help me out...
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
u r trying to install wrong driver for wrong hardware
if u need to connect it to pc to ROOT, u need to install pdanet
if u need to update FW, install the driver given in FW package

Samsung GT-S7562 S duos / What you need [ Root | CWM | Updating | Rom ]

-> -> I own only the credit of the explanation <- <-
Warning, This will void your warranty, i am not responsible for any thing you do with your phone
Only for s7562​Rooting Tutorials
method 1 :
Files are from Droidser
This method will root your phone and will give you CWM recovery which are going to go in later,
1.You will need samsung drivers, you can get these from Samsung kies (just intall it) or from here
2.Download the s7562 Rooting Kit (the link is hosted by droidser too)
3.Extract The kit, and open Odin, You can get a later version of odin from here. see Image 1
4.Click on PDA and choose The Recovery.tar, see image 2
5.Now Let's go to our device,
a. Go to developer option, now Hit ok and Check USB debugging if it is not
b.Put Cwm_SuperSU or Cwm_SuperUser, Only choose one
c.Turn your device off and boot it in downloading/download mod ( Turn it off, and Hold Vol_Down & Home & Power until you see light coming out from the device ( When you feel it booted ) and then you should see a warning, just ignore it and click Vol_Up ). should be something like image 3.
6.Now connect your android To your pc that has Odin, if done every thing correctly You should see The windows downloading drivers or Odin that printed : Com:****
7.Make sure to Have : Auto Reboot & F. Reset time & Pda Checkedd after you done Step 5 & 6. see image 4
8.Remove the back Cover of your phone ( you must do that )
9.Now Click on START in odin
10. You should see a Blue bar in the downloading / Download mod in your device
11. keep watching it, till it finishes
12.When it finishes, Your device has to reboot, Just When you see the samsung logo, Remove your battery
Now to the easy part
13.Remove the Usb from your device, and reinsert battery
14.Now you changed Your Stock_Recovery, With CWM_Recovery. Now you want to go to your new recovery, by pressing Vol_Down & Vol_Up & Home & Power release when you see samsung logo. You should see something like image 5 ( Version might be diffrent ).
Note : Your touch won't work here, Move with your Vol_Up / Vol_down and choose with Home button and go back with back button
15. Now i suggest you to make a backup if you have an external Sdcard, if not just skip
16. now choose " Install Zip from sdCard " and Go to Choose zip from Sdcard Or From internal sd Card ( Depends on where you put your Cwm_SUperuser)
17. now Go to where you have put your CWM_Superuser / Cwm_SuperSU. and click on The Home, and click yes and now wait a bit,
18. Now go back and choose Reboot System now
if you want to remove the triangle Download RootTriangleAway From XDA or PlayStore (The app is Free, but Please buy it, to support the developer )
Now you are rooted :victory::victory::victory:
This is another CWM Recovery, if the first one didn't work for you it was posted by vikassaini01 Thx for Androidnoob1961 and Mohitash for posting this
And Therer is KyleOpen Recovery ( It's a cwm recovery but does not support installing from Ext_SdCard )
Click to expand...
Click to collapse
Method 2 (This won't install Cwm But will root your phone )
Go to unlockroot.com and download Unlock Root pro ( The blue one )
Now install it ( it will install 2 apps one that needs a key and one doesn't )
Open it and connect your device ( Have usb debugging on ) without closing ( do not turn off your device )
Click on Root and Than it will ask you if you want to install PowerSaving app, make your selection
Than it will ask you to reboot system click Yes/Ok
Now you are rooted :victory::victory::victory:
if you want to get CWM follow steps 1 -> 12
This method will not Work for all but Give it a shot
i changed the method of the explanition a bit, THank me if i helped you
Link Summary
Samsung kies : http://www.samsung.com/us/kies/
Droidzer Rooting kit : http://d-h.st/BtL
Another Cwm : http://forum.xda-developers.com/attachment.php?attachmentid=1384777&d=1349682668
Note : if you want your warranty back, you will have to remove the Triangle (if you have) (Method 2 doesn't give you a triangle) with triangle away and Then : Flash a new BaseRom from samsung update (any one should work) and Root / cwm_recovery will be gone and you will get your warranty back
( See post 2 for Installing a rom / and 3 for Updating the phone )

How to Install a ROM
Note : This is based on the first post, so make sure that you have done the first 12 steps of post #1 ( that talks about installing Cwm recovery ) to be able to use/understand this ->
1. Place the rom In your Phone's external sd Card
2.Turn off Your device
3. Go to CWM Recovery ( VOl_UP + Vol_Down + Home + Power button )
4. I suggest you to make a back up if you have an external sd card ( a single back up can go up to 1GB )
5.Go to Wipe Data Factory reset and choose it, now Choose Yes, now wait (every thing will be deleted, you can download helium awesome app and doesn't rly needs root)
6. Go to Wipe Cache -> Yes -> wait
7. Now go to Advanced -> Wipe dalvik cache -> Yes -> wait
only for pmp light users : advanced -> wipe battery stats
8. now Install zip from sd card -> Choose zip from sd card -> choose the rom -> Yes -> wait
9. Now hit : Reboot system now
10. First boot may take some times, pls have some patient
s7562 ROM list :
Kyle open ROM By CheatMan
PMP Light ROM ( Modded stock ) By Mohitash
PMP Ultra ROM by Mohitash
HYD52ROM (MIUI Themed) / HYD52ROM (Glossy THEMED) by husen4u
SilverNexus ROM by SilverDragon24
COSMIC ROM by abhi922
S Duos Google Play Edition by gkostas
HyperX™ ROM by charles1111
Tweaks/Mods :
PMP™ Xtreme Purity MOD
Battery Mods
Modded Stock Camera
Collection Of Bootanimations
Lockscreen Swipe Effects
Xperia Z Flavor/Xperia Z Mod
Transparent Music Player Widgets
All by Mohitash
Please If you have uploaded / found any new rom, message me with the link

How to Upgrade
Method 1 :
Go to Your Recovery ( VOL Down, VOL up, Home, Power )
Make sure to have a backup, Now go to wipe data factory reset, and wipe cache
Go to Download mode ( Make sure USB Debugging is checked )
Open odin and Click on PDA (and Choose the update it should be like this : *********.tar.md5 )
Do not change any odin setting
Click on start
And let the device reboot normaly, and now You succesfully Updated Your android
Please Note that most of s7562 requires you to Upgrade your ROM ( Android )
Method 2 :
Download and install UnlockFlash for samsung
Once again, check "USB Debugging" ( settings > developer options )
Keep the phone running, Open unlock flash -> follow instructions -> Done

http://forum.xda-developers.com/showthread.php?t=2335532
Here's another ROM thanks for the list.

Dragon122333 said:
1. Turn off Your device
2. Place the rom In your Phone's external sd Card
3. Go to CWM Recovery ( VOl_UP + Vol_Down + Home + Power button )
4. I suggest you to make a back up if you have an external sd card ( a single back up can go up to 1GB )
5. Now Make sure you have a backup, Go to Wipe Data Factory reset and choose it, now Choose Yes, now wait
6. Go to Wipe Cache -> Yes -> wait
7. Now go to Advanced -> Wipe dalvik cache -> Yes -> wait
8. now Install zip from sd card -> Choose zip from sd card -> choose the rom -> Yes -> wait
9. Now hit : Reboot system now
10. First boot may take some times, pls be have some patient
s7562 RoM LiSt :
Kyle open ROM By CheatMan
PMP Light ROM ( Modded stock ) By Mohitash
HYD52 ROM by husen4u
If you have uploaded / Found any new rom. Please message me with the link, and if it's not tested i will test it, and then i will Add it to the list
Click to expand...
Click to collapse
Hey mate thanks for this
But you must correct it...
1. Place the rom In your Phone's internal sd Card
2. Turn off Your device
3. Go to CWM........
SOLVED
:good:

Mohitash said:
Hey mate thanks for this
But you must correct it...
1. Place the rom In your Phone's internal sd Card
2. Turn off Your device
3. Go to CWM........
:good:
Click to expand...
Click to collapse
External SD card is a better idea isnt it? seeing as the phones storage space is not only limited, but also exposed to factory wipes and such. The only problem is that cheatmans kyle cwm has the internal and external sd cards switched the wrong way around so its the internal sd card inside his cwm, but in reality it's really actually the external sd card... if that makes sense
This is the cwm recovery i use (with the sd cards the right way round)
http://forum.xda-developers.com/attachment.php?attachmentid=1384777&d=1349682668
from this guys post:
http://forum.xda-developers.com/showpost.php?p=32500955&postcount=35

Androidnoob1961 said:
External SD card is a better idea isnt it? seeing as the phones storage space is not only limited, but also exposed to factory wipes and such. The only problem is that cheatmans kyle cwm has the internal and external sd cards switched the wrong way around so its the internal sd card inside his cwm, but in reality it's really actually the external sd card... if that makes sense
This is the cwm recovery i use (with the sd cards the right way round)
http://forum.xda-developers.com/attachment.php?attachmentid=1384777&d=1349682668
from this guys post:
http://forum.xda-developers.com/showpost.php?p=32500955&postcount=35
Click to expand...
Click to collapse
Yup, thats fine. But see 1st three points in that. Something to be changed there, am i right?
SOLVED

Mohitash said:
Hey mate thanks for this
But you must correct it...
1. Place the rom In your Phone's internal sd Card
2. Turn off Your device
3. Go to CWM........
:good:
Click to expand...
Click to collapse
Corrected it, Thanks
But i think that Ext_SdCard is safer as you will need to wipe
And thank you and @Androidnoob1961 for the support

Quote, requote etc
well,
the initial very good idea from OP here to clear up
the messy site (t=2087177) is beginning now to end
up in a same messy place again.
can't you guys just quote the appropriate lines you refer to?
it sucks to scroll through large quotes for the sake
of reading a couple of lines of remarks been made to.
a lot of problems on the original site which caused this site
was due to this crap and also missing CR/LF,
bumptious letters, vacuous images etc.
I'm sure that was one of the main reasons why a lot of
people run including me into trouble because vital questions
had not been dignified with a response and/or simple answers
just been overseen.
at the end of the day - nobody here wants to end up with a brick!?
Damian

2 way call recording?
Hi all,
It is any patch for calls recording on this device? It is important to me to know because i what to buy this device and i need this function.
Sorry if i am out of topic.
Thanks.

Anvil2k12 said:
well,
the initial very good idea from OP here to clear up
the messy site (t=2087177) is beginning now to end
up in a same messy place again.
can't you guys just quote the appropriate lines you refer to?
it sucks to scroll through large quotes for the sake
of reading a couple of lines of remarks been made to.
a lot of problems on the original site which caused this site
was due to this crap and also missing CR/LF,
bumptious letters, vacuous images etc.
I'm sure that was one of the main reasons why a lot of
people run including me into trouble because vital questions
had not been dignified with a response and/or simple answers
just been overseen.
at the end of the day - nobody here wants to end up with a brick!?
Damian
Click to expand...
Click to collapse
Hi, as you know. xda forums doesn't have an actual Thread for our device. so i just decided to collect all information i know about out device and just added them, you should find every thing you need in first 3 posts. please tell me what you see is missing and i will see if i can add them

PMP Light ROM v2 Released
v2 Released
http://forum.xda-developers.com/showthread.php?t=2343108
You can see changelog in post #3 in ROM thread to know more.
ThankYou

Dragon122333 said:
14.Now you changed Your Stock_Recovery, With CWM_Recovery. Now you want to go to your new recovery, by pressing Vol_Down & Vol_Up & Home & Power release when you see samsung logo. You should see something like image 5 ( Version might be diffrent ).
Note : Your touch won't work here, Move with your Vol_Up / Vol_down and choose with Home button and go back with back button
Click to expand...
Click to collapse
Great guide! very detailed and thorough. Just a correction id like to make as i was reading through though, in cwm recovery, isnt the power button used to go back?

Androidnoob1961 said:
Great guide! very detailed and thorough. Just a correction id like to make as i was reading through though, in cwm recovery, isnt the power button used to go back?
Click to expand...
Click to collapse
Actually no, the power button is used for nothing in the cwm recovery ( at least for the one i posted ), but it is used to select in the stock recovery

s3mtex said:
Hi all,
It is any patch for calls recording on this device? It is important to me to know because i what to buy this device and i need this function.
Sorry if i am out of topic.
Thanks.
Click to expand...
Click to collapse
Currently there is no way to record without an app,
But, there are a lot of call recording apps on the market

Yes you're correct, my mistake. The power button is used to go back only in the cwm which I posted earlier

Dragon122333 said:
Currently there is no way to record without an app,
But, there are a lot of call recording apps on the market
Click to expand...
Click to collapse
Yes, i know, but is the telephone/kernel capable of 2 way recording calls?
Has anybody try and is working?

BootAnimation
Check this guys
http://forum.xda-developers.com/showthread.php?p=43215819

Mohitash said:
[/COLOR]Check this guys
http://forum.xda-developers.com/showthread.php?p=43215819
Click to expand...
Click to collapse
Awesome We realy need a sound Collection of sounds for them
But can you make a bootanimation.zip for them ? :/

s3mtex said:
Yes, i know, but is the telephone/kernel capable of 2 way recording calls?
Has anybody try and is working?
Click to expand...
Click to collapse
Please... i really need to know. Is the function that i need and it will determine to buy or not the phone.
Can anybody confirm the working or not of this function?

Root canvas 2 running on ics

WELL WITHOUT WASTING MUCH OF THE TIME IN RAMBLING LET US SIMPLY START THE TUTORIAL:HOW TO ROOT CANVAS 2 RUNNING ON / WITH ICS......WHICH IS AS SIMPLE AS PLAYING SNAKE AND LADDER.
ROOTING.....
first of all enable USB DEBUGGING in your phone.
now connect your phone to your pc.
slide down the notification bar and select'touch for other options'.
now select MEDIA DEVICE option from that menu.
THEN DOWNLOAD bin4ry rooting tool from here..
extract it to any folder and open that folder.
now open runme.bat file from there.
it looks like a green coloured command prompt.
now just press 1 and hit enter.
then it will take about 1-2 mins as it is coping files to your phone.
(during this process your phone may reboot several times.)
THEN AFTER SOME TIME YOU WILL SEE THAT YOUR PHONES SCREEN HAS LIT UP.
IT WILL ASK YOU TO ENTER ENCRYPTION PASSWORD AND THEN FULL RESTORE YOUR PHONE.
IF YOU HAVEN'T SET UP ANY ENCRYPTION PASSWORD THEN JUST SELECT FULL RESTORE.
then after completing the process it will say press any key to continue.
now close this tool and switch on your phone.
you will find an app named superuser in your phone phone.
INSTALLING CLOCKWORK RECOVERY.
DOWNLOAD CLOCKWORK MOD RECOVERY FROM HERE.
put that downloaded recovery file (image) in the root of your sd card i.e. outside any folders otherwise mobile uncle tools won't detect it.
install an app named mobile uncle tools. YOU CAN DOWNLOAD IT FROM HERE.
open it and select recovery update option.
it will look for recovery file in your phone and display the result.
from there click on the recovery file and then select yes.
this will flash clockwork recovery in your phone.
And with dis u r done wid al d procedure..
Cill out
Hit thanx if i helped

Link of bin4ry rooting tool- www.mediafire.com/?wadbxnnxa8kf4b4
Hit thx if i helped

Link of cwm recovery (already renamed to recovery.img)
www.mediafire.com/download/ued9c4iqn6cr086/recovery.img

Good one.
Thx...:thumbup:

Please help..
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.

CM Punk said:
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.
Click to expand...
Click to collapse
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:

[email protected] said:
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:
Click to expand...
Click to collapse
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?

CM Punk said:
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?
Click to expand...
Click to collapse
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.

[email protected] said:
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.
Click to expand...
Click to collapse
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?

CM Punk said:
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?
Click to expand...
Click to collapse
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app

icoolguy1995 said:
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.

CM Punk said:
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.
Click to expand...
Click to collapse
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u

[email protected] said:
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u
Click to expand...
Click to collapse
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.

I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app

icoolguy1995 said:
I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ya i also thought that this could be the reason but he told me that only one device is connected...that why i asked him to follow the method of rooting jellybean because it also works on ics.

CM Punk said:
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.
Click to expand...
Click to collapse
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.

[email protected] said:
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.
Click to expand...
Click to collapse
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.

CM Punk said:
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.
Click to expand...
Click to collapse
Did you tried to run as admin

icoolguy1995 said:
Did you tried to run as admin
Click to expand...
Click to collapse
Yes.

CM Punk said:
Yes.
Click to expand...
Click to collapse
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
---------- Post added at 03:54 PM ---------- Previous post was at 03:49 PM ----------
icoolguy1995 said:
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
Click to expand...
Click to collapse
Another suggestion if the above method does not work.
Try with a different port or with different cable.