Database Info

Update Galaxy Fit With 4.0.3 Ice-Cream Sandwich firmware [BETA 4] Realese

Prerequisites
- Charge your device to a minimum of 90% as since the procedure is bit lengthy, the phone will consume more battery than the normal usage. Lesser battery will lead to the turning Off of the device in the middle of the firmware update process.
- Back up all your data which is there in the phone memory, as in an unlikely event if the data gets lost then you can easily restore the backup.
- Up next is you need to ensure that the USB Debugging is enabled in your phone. The USB Debugging can be enabled from the path of Settings > Applications > Development > USB debugging. Apart from this you also need to ensure that your computer has ADMIN privileges and USB Read / Write Access. It’s not recommended to use computers which have limited access.
Instructions For Custom ROM users
Just in case if you are on any of the custom ROMs then you need turn Off your phone so that you can then enter into the recovery mode. The recovery mode can be entered by pressing Volume UP Key + Middle button, and holding both simultaneously press the Power Button. If the device boots normally then you need to again try to enter the same.
In the recovery mode, select the options like Wipe data/factory reset, Wipe Cache partition and then select reboot system now to reboot the phone. You can select the options using the Volume keys and can select the appropriate option by pressing the Power button. This basically clears off all the cache data which is there in the phone so that the room can be made to accommodate this all new custom ROM firmwares
Procedure For Updating
STEP 1: Official Firmware Installation
First up you need to update your phone with the 2.3.x version of firmware (And not on Froyo 2.2.x). You need to follow the instructions which are mentioned below in the form of Links. Please note that it’s a base firmware and you need to install it
STEP 2:Install ClockWorkMod 5 Recovery Image
First up you need to download the beni_cwm-5_ext4_v2.tar & odin+beni.ops.zip.Extract the files and Find Odin 4.38.exe And BENI_v1.0.ops in your Extracted Folder.
Now, Switch off Your Fit And Enter into Download Mode By Pressing Power+Menu Button+Volume Down Button Until Downloading Mode Appears.Open S5670_Odin_Multi_Downloader_v4.38.exe.Place BENI_v1.0.ops on OPS tab.Check the One Package Option.Place beni_cwm-5_ext4_v2.tar on One Package tab.Connect the device to PC which you have put in Downloading Mode.Press Start and wait for flashing process is finished.
After this you will have to proceed to the next step which is mentioned Further
STEP 3:Installation Of CM 9 ICS Firmware
1.First up you need to download Zip file which is mentioned below in your computer
https://hotfile.com/dl/151919225/1624f9b/cm_beni-beta4.zip.html
2.Now, once you are done with downloading the above file in your computer, you need to now copy the file in your phone and ensure that you are not placing these file deep into the phone. Please note that you should not modify or rename the files which you have downloaded or else there is a high probability that the file would not be supported.
3.After this Enter in Recovery Mode by Holding Power Off + Menu Button Until Recovery Mode Appears.
4.In the recovery mode, you will have to choose “choose zip from SD”. Now, from the list of files and paths you will need to first select the file which is named as “cm_beni-beta4.zip (or which You Have Copied to SD Earlier)”. Ensure that you select the file properly.
5.Now, as soon as the process is over.Select Wipe Data/Factory Reset And Wipe Cache Partition.After All Done Select “Reboot System Now”
So, there you go as soon as the phone is rebooted you will see that the firmware is updated with the latest version of Android 4.0(ICS 4.0.3)...
No Need To Say THANKS Just Press It..

mohitawasthi said:
Prerequisites
- Charge your device to a minimum of 90% as since the procedure is bit lengthy, the phone will consume more battery than the normal usage. Lesser battery will lead to the turning Off of the device in the middle of the firmware update process.
- Back up all your data which is there in the phone memory, as in an unlikely event if the data gets lost then you can easily restore the backup.
- Up next is you need to ensure that the USB Debugging is enabled in your phone. The USB Debugging can be enabled from the path of Settings > Applications > Development > USB debugging. Apart from this you also need to ensure that your computer has ADMIN privileges and USB Read / Write Access. It’s not recommended to use computers which have limited access.
Instructions For Custom ROM users
Just in case if you are on any of the custom ROMs then you need turn Off your phone so that you can then enter into the recovery mode. The recovery mode can be entered by pressing Volume UP Key + Middle button, and holding both simultaneously press the Power Button. If the device boots normally then you need to again try to enter the same.
In the recovery mode, select the options like Wipe data/factory reset, Wipe Cache partition and then select reboot system now to reboot the phone. You can select the options using the Volume keys and can select the appropriate option by pressing the Power button. This basically clears off all the cache data which is there in the phone so that the room can be made to accommodate this all new custom ROM firmwares
Procedure For Updating
STEP 1: Official Firmware Installation
First up you need to update your phone with the 2.3.x version of firmware (And not on Froyo 2.2.x). You need to follow the instructions which are mentioned below in the form of Links. Please note that it’s a base firmware and you need to install it
STEP 2:Install ClockWorkMod 5 Recovery Image
First up you need to download the beni_cwm-5_ext4_v2.tar & odin+beni.ops.zip.Extract the files and Find Odin 4.38.exe And BENI_v1.0.ops in your Extracted Folder.
Now, Switch off Your Fit And Enter into Download Mode By Pressing Power+Menu Button+Volume Down Button Until Downloading Mode Appears.Open S5670_Odin_Multi_Downloader_v4.38.exe.Place BENI_v1.0.ops on OPS tab.Check the One Package Option.Place beni_cwm-5_ext4_v2.tar on One Package tab.Connect the device to PC which you have put in Downloading Mode.Press Start and wait for flashing process is finished.
After this you will have to proceed to the next step which is mentioned Further
STEP 3:Installation Of CM 9 ICS Firmware
1.First up you need to download Zip file which is mentioned below in your computer
https://hotfile.com/dl/151919225/1624f9b/cm_beni-beta4.zip.html
2.Now, once you are done with downloading the above file in your computer, you need to now copy the file in your phone and ensure that you are not placing these file deep into the phone. Please note that you should not modify or rename the files which you have downloaded or else there is a high probability that the file would not be supported.
3.After this Enter in Recovery Mode by Holding Power Off + Menu Button Until Recovery Mode Appears.
4.In the recovery mode, you will have to choose “choose zip from SD”. Now, from the list of files and paths you will need to first select the file which is named as “cm_beni-beta4.zip (or which You Have Copied to SD Earlier)”. Ensure that you select the file properly.
5.Now, as soon as the process is over.Select Wipe Data/Factory Reset And Wipe Cache Partition.After All Done Select “Reboot System Now”
So, there you go as soon as the phone is rebooted you will see that the firmware is updated with the latest version of Android 4.0(ICS 4.0.3)...
No Need To Say THANKS Just Press It..
Click to expand...
Click to collapse
From which planet are you?

ZmisiS said:
From which planet are you?
Click to expand...
Click to collapse
Didn't Get U..

ZmisiS said:
From which planet are you?
Click to expand...
Click to collapse
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??

mohitawasthi said:
Didn't Get U..
Click to expand...
Click to collapse
Lol .. Wen beta 7 s out y r u posting an update for beta 4 ?? Read da forum rules .. Dnt post spam .. !!
Sent From Hell ... Wanna Come .. ??

avilove4u said:
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??
Click to expand...
Click to collapse
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...

avilove4u said:
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??
Click to expand...
Click to collapse
He already has 15 posts. He coping from other websites and pasting on this site.

ZmisiS said:
He already has 15 posts. He coping from other websites and pasting on this site.
Click to expand...
Click to collapse
Ohh u knw dat fact...lolzz
Give d souce where i copy paste it...

mohitawasthi said:
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...
Click to expand...
Click to collapse
This Beta 4 already is on this site.
---------- Post added at 08:26 PM ---------- Previous post was at 08:25 PM ----------
mohitawasthi said:
Ohh u knw dat fact...lolzz
Give d souce where i copy paste it...
Click to expand...
Click to collapse
Ask Aspire.

mohitawasthi said:
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...
Click to expand...
Click to collapse
No one wants beta 4 wen beta 7 s out .. !!
Sent From Hell ... Wanna Come .. ??

ZmisiS said:
He already has 15 posts. He coping from other websites and pasting on this site.
Click to expand...
Click to collapse
Ohh .. Then it seems dat he loves flickering n bugs.. As beta 4 has sooo many bugs !!!!
Sent From Hell ... Wanna Come .. ??

ZmisiS said:
This Beta 4 already is on this site.
---------- Post added at 08:26 PM ---------- Previous post was at 08:25 PM ----------
Ask Aspire.
Click to expand...
Click to collapse
Why dude why i ask to Aspire U say dat i copy paste it so u knw dat fact frm where i copy paste it so jst tel wats d problm....i repeat mind ur work dont interfere...

mohitawasthi said:
Why dude why i ask to Aspire U say dat i copy paste it so u knw dat fact frm where i copy paste it so jst tel wats d problm....i repeat mind ur work dont interfere...
Click to expand...
Click to collapse
Just you work. I have a right to express their opinion.

ZmisiS said:
Just you work. I have a right to express their opinion.
Click to expand...
Click to collapse
yea so only express ur opinion or give a suggestion...dont interfere...mind ur work nly..

mohitawasthi said:
yea so only express ur opinion or give a suggestion...dont interfere...mind ur work nly..
Click to expand...
Click to collapse
My opinion is that what you are doing on this website is wrong.

[q] huawei u8812d

Can I root Huawei U8812D? pls someone advice me.

babbird said:
Can I root Huawei U8812D? pls someone advice me.
Click to expand...
Click to collapse
I am a new user so I cannot post a links yet but google your phone and there should be a link to ANDROID net forum. There you will find a video showing you how to do it.

found something on chinese site that looks good
babbird said:
Can I root Huawei U8812D? pls someone advice me.
Click to expand...
Click to collapse
This looks really rough, but apparantly there is a boot.img, then other cracking tools can be used.
I'd love to try it, but... well... my chinese is limited to google-translate.
The URL won't post so this is a big hint:
products . mobileuncle . com / thread-202642-1-1 . html

I think I got it root on g302d u8812d
j_chytown said:
This looks really rough, but apparantly there is a boot.img, then other cracking tools can be used.
I'd love to try it, but... well... my chinese is limited to google-translate.
The URL won't post so this is a big hint:
products . mobileuncle . com / thread-202642-1-1 . html
Click to expand...
Click to collapse
Currently on that URL is a approx 14 MB rar file download, I _think_ I just got it sorted!
I don't have time now to make this pretty, but some others who want to hack. add links, etc feel free to work with this...
in fact I dont know if all these steps are required.
General Broad steps (ymmv, you are doing this to your own dang phone, dont blame me for bricks viruses or earthquakes etc, etc/ etc).
on your computer, uninstall adb, pdanet and any other tools that use the adb drivers and dlls, reboot as needed.
install the mt6575 drivers (I forgot whether I downloaded these or if they were part of the 14 meg file) reboot as needed
power down phone.
remove battery from phone, don't plug into computer.
launch flash_tool.exe
load the included scatterloading file MT6575...emmc.txt
press the download button
plug in phone to usb
put battery in phone
watch the blinkinlights for a few seconds, wait for the big green O
then I disconnect phone and ensure power down.
install SDK
power up phone and plug in
test adb (adb shell)
kill adb server
download and install superoneclick
download extra superoneclick exploits
launch superoneclick
click the big root button.
Test (you can use something like rom manager)
Now people should be able to try to install various CWMs.
I haven't gotten that far yet.

CWM for u8812d g302d ?
j_chytown said:
Currently on that URL is a approx 14 MB rar file download, I _think_ I just got it sorted!
I don't have time now to make this pretty, but some others who want to hack. add links, etc feel free to work with this...
in fact I dont know if all these steps are required.
General Broad steps (ymmv, you are doing this to your own dang phone, dont blame me for bricks viruses or earthquakes etc, etc/ etc).
on your computer, uninstall adb, pdanet and any other tools that use the adb drivers and dlls, reboot as needed.
install the mt6575 drivers (I forgot whether I downloaded these or if they were part of the 14 meg file) reboot as needed
power down phone.
remove battery from phone, don't plug into computer.
launch flash_tool.exe
load the included scatterloading file MT6575...emmc.txt
press the download button
plug in phone to usb
put battery in phone
watch the blinkinlights for a few seconds, wait for the big green O
then I disconnect phone and ensure power down.
install SDK
power up phone and plug in
test adb (adb shell)
kill adb server
download and install superoneclick
download extra superoneclick exploits
launch superoneclick
click the big root button.
Test (you can use something like rom manager)
Now people should be able to try to install various CWMs.
I haven't gotten that far yet.
Click to expand...
Click to collapse
Okay I may have found a working CWM clockworkmod recovery, but I don't have access to the chinese site, so others out there may be able to download it and try it out.
mm-mpxteam . net / forum . php ? mod = viewthread & tid = 4203
or maybe this one:
products . mobileuncle . com / thread-203098-1-1 . html

got the uncles recovery on the phone!
j_chytown said:
Okay I may have found a working CWM clockworkmod recovery, but I don't have access to the chinese site, so others out there may be able to download it and try it out.
mm-mpxteam . net / forum . php ? mod = viewthread & tid = 4203
or maybe this one:
products . mobileuncle . com / thread-203098-1-1 . html
Click to expand...
Click to collapse
it isn't clockwork, but I got a mobileuncle recovery on the phone. Is kinda fun to try to translate!
pan . baidu . com / share / link ? shareid = 63706 & uk = 2483368669
---------- Post added at 06:39 PM ---------- Previous post was at 06:25 PM ----------
j_chytown said:
it isn't clockwork, but I got a mobileuncle recovery on the phone. Is kinda fun to try to translate!
pan . baidu . com / share / link ? shareid = 63706 & uk = 2483368669
Click to expand...
Click to collapse
installed gapps 20110828 (via mobileuncle recovery) and I now have a market that doesn't force-close!
still getting "partners" to force close, but a lot of other stuff is working.

Great work!!! I'll try this on my phone or wait until is working?
Are the recovery and rom in chinese?
Thank a lot for testing.

working well
hiosin said:
Great work!!! I'll try this on my phone or wait until is working?
Are the recovery and rom in chinese?
Thank a lot for testing.
Click to expand...
Click to collapse
It is working very well.
No need for you or anyone to wait.
Just please know what you are doing (do you have basic understanding of recovery mode, roms, factory mode, and the dangers) in other words, if this is your first time doing this on a phone.. ask someone who knows what they are doing for help because I am not able to put together a documented procedure, but the findings above should allow someone else to do that. Additionally, I have no idea of the legality or safety of the software at URLs above.
conceptually this is 4 steps
1) flash boot.img that will allow cracking
2) crack to get SU installed
3) install Mobile Uncle Recovery mode and app
4) install gapps.
The MobileUncle recovery mode is Chinese, But the mobileuncle app is kinda like rom manager, it lets you set up what happens at next boot so you don't need to read the chinese in recovery text mode.
The patched rom is working for me in English with root, no detectable problem except FC on google partners (and I can't tell if that actually does anything). Remember this is not a new rom, just a patch to the huawei rom that allows a root crack.
There are about 4 chinese apps that I am afraid to uninstall..
one appears to be a chinese app store too, kinda fun to browse
gapps must be flashed with mobileuncle recovery (don't just unzip them)
US google play store is working.
I am fully migrated to this phone now and use it for daily work.
Good luck, and remember that this is why you got an android instead of a i-Thing.

Thanks thanks again. I'll try it and don't worry this is not the first time to modify a mobile. If it is all ok i posted here.

Working u8812d
Ok... It was successfully working on my phone. I have root and change recovery and then installing gapps. Almost of the apps is working of the play store. Thanks again and hope there is a release of ICS or JB rom for our phones.
See ya!!!:good:
j_chytown said:
It is working very well.
No need for you or anyone to wait.
Just please know what you are doing (do you have basic understanding of recovery mode, roms, factory mode, and the dangers) in other words, if this is your first time doing this on a phone.. ask someone who knows what they are doing for help because I am not able to put together a documented procedure, but the findings above should allow someone else to do that. Additionally, I have no idea of the legality or safety of the software at URLs above.
conceptually this is 4 steps
1) flash boot.img that will allow cracking
2) crack to get SU installed
3) install Mobile Uncle Recovery mode and app
4) install gapps.
The MobileUncle recovery mode is Chinese, But the mobileuncle app is kinda like rom manager, it lets you set up what happens at next boot so you don't need to read the chinese in recovery text mode.
The patched rom is working for me in English with root, no detectable problem except FC on google partners (and I can't tell if that actually does anything). Remember this is not a new rom, just a patch to the huawei rom that allows a root crack.
There are about 4 chinese apps that I am afraid to uninstall..
one appears to be a chinese app store too, kinda fun to browse
gapps must be flashed with mobileuncle recovery (don't just unzip them)
US google play store is working.
I am fully migrated to this phone now and use it for daily work.
Good luck, and remember that this is why you got an android instead of a i-Thing.
Click to expand...
Click to collapse

This does not work for my u8812d, gives an error using flash tool

Still not rooting
j_chytown said:
Currently on that URL is a approx 14 MB rar file download, I _think_ I just got it sorted!
I don't have time now to make this pretty, but some others who want to hack. add links, etc feel free to work with this...
in fact I dont know if all these steps are required.
General Broad steps (ymmv, you are doing this to your own dang phone, dont blame me for bricks viruses or earthquakes etc, etc/ etc).
on your computer, uninstall adb, pdanet and any other tools that use the adb drivers and dlls, reboot as needed.
install the mt6575 drivers (I forgot whether I downloaded these or if they were part of the 14 meg file) reboot as needed
power down phone.
remove battery from phone, don't plug into computer.
launch flash_tool.exe
load the included scatterloading file MT6575...emmc.txt
press the download button
plug in phone to usb
put battery in phone
watch the blinkinlights for a few seconds, wait for the big green O
then I disconnect phone and ensure power down.
install SDK
power up phone and plug in
test adb (adb shell)
kill adb server
download and install superoneclick
download extra superoneclick exploits
launch superoneclick
click the big root button.
Test (you can use something like rom manager)
Now people should be able to try to install various CWMs.
I haven't gotten that far yet.
Click to expand...
Click to collapse
Thanks for the steps though the problems are still coming thick and fast, I have a new U8812D from China, no China unicom splashscreen but lots of 'bloatware' still. I've been trying for days to root this thing and nothing's working.
I'm pretty sure I need root access becasue the phone is currently preventing me from adding my Gmail account and using the google play market and apps, other bits and pieces like assigning incoming call number to a contact are supposedly fixed by getting the google thing right. The phone is good but I'm missing alot of functionality.
If the above description sounds like rooting is not the solution, please let me know and point me to the right forum, if rooting is the obviously the only way out, I'm hoping to clarify a few step in the above walkthrough to help me and others.
1. I cant install the mt6575 MediaTek drivers, installing directly gives error 'driver cannot be installed this way' there is no COM-LPT port in my device manager to attach it to as a manually locate driver, I can add a COM port with add remove hardware but I have Code 10 error, device cannot start and doesnt seem to accept the mt6575 driver as an update even when forced to it with locate new driver, apparently this is no problem from other forums, still bugging me. Maybe I havent the right files? how do i get COM-LPT ports to show up properly?
2. when 'install m6575 drivers ... reboot' is the phone plugged in? to what device do we install the drivers or should it be automatic?
3. launch flash tool, i have located two versions of the MT6575...emmc.txt file, one delivers error, block count fail and has no files paths for the item in the main table, the other refuses to open, giving error, incorrect scatter file format. The latter has considerably more data in it when read in notepad.
4. Becasue of these errors, SP flash tool does not download to phone. all subsequent steps fail.
Assuming the initial flashing steps are successful, I must to use SuperOneClick to root the phone, where do I find the extra exploits needed? or are tehy automoatically sourced by SOC? Succeeding the root access step, I assume i can freeze the apps causing problems to my google sign in or delete them. Or could I please be directed to the ATTPlain rom mentionned by JohnnyParanoia in 'Almost All Huawei Stock Roms (Firmware) - Updated 28/06/12' board.
Since so many of the resource files I've trawled through are bung, anyone who can point me to reliable/tested files known to work with the U8812d I'd greatly appreciate in on top of the great appreciation I already have for your patience with a Noob. I located the 14Mbit .rar file mentioned above but not all parts worked, had to dl the different programs individually and some files had to hunt down form fileshare sites.
Lastly, i am using an HP laptop, Windows 7 64-bit, Thanks in advance.
Michael

SM-T210 Root without ODIN!

Hey guys, since I wanted the flashcounter to keep from climbing up too high, I was looking for a rooting method, that would not involve Odin.
I searched all day long and finally had luck with THIS ONE.
Works like a charm, but leaves a chinese version of superuser behind. But I guess everyone who is looking for root and makes it, should be able to change the superuser.apk (dont forget to set the correct permissions ).
To grant Superuser permissions, you need to hit the right button at the superuser prompt!
-sidenote- mine updated during the setup process, so wait till it goes all the way to 100% and installs again.
Well other than that, have fun and now I need to look into mobile Odin, because then I guess we wont need Odin anymore and can keep the flash-O-meter from climbing
Maybe someone can also create a full system-dump, so we can restore untouched partitions if needed. Would be great if someone who is new here could do so!
TWRP ADB flasher(no Odin-no flashcounter):
http://d-h.st/xde
Credits go to @gr8nole (TWRP) @Ilko (the script) @redy2006 (the package)
If I forgot you here, please PM me and I ll add you ASAP!
Hope it helps some fellows out
Oh and maybe I can find out about the exploit they are using, so we can make our own software, without having to install their software

root
Thanks for the post this worked once I remembered to set to USB bugging mode good thing I read Chinese (joking)

Cool!
Too bad I already rooted my SM-T210 with Odin by now. Still an interesting find!

LEECH666 said:
Cool!
Too bad I already rooted my SM-T210 with Odin by now. Still an interesting find!
Click to expand...
Click to collapse
I also had it rooted before already, flashed back, rooted it this way, flashed TWRP and guess what, I think I also found a simple way to turn you custom status to official again both in the tab and in downnload mode, so I got root, TWRP and am still status: official and able yo update already made a nandroid, so others can test it as well
Sent from my SM-T210 using xda app-developers app

Does anyone wanna try to restore my backup and see if you also get a rooted but still "official" device? If yes, PM me and I ll upload it

N00BY0815 said:
Does anyone wanna try to restore my backup and see if you also get a rooted but still "official" device? If yes, PM me and I ll upload it
Click to expand...
Click to collapse
Nice, the value has to be stored somewhere where flashing neither custom ROMs nor Recovery touch it...shouldn't be too hard to find it - but probably dangerous...(bootloader partition?)

k.aibutsu said:
Nice, the value has to be stored somewhere where flashing neither custom ROMs nor Recovery touch it...shouldn't be too hard to find it - but probably dangerous...(bootloader partition?)
Click to expand...
Click to collapse
Try the following:
I first flashed the ROM released in October 2013, then rooted and installed TWRP.
Then:
Delete Sysscope data
Stop the process
Stop Enterprise vpn (not sure, if this is necessary)
Delete Enterprise sysscope data
Shut your tablet down,
Reboot to upload mode, enter it and check for the change, then hold the powerbutton for 10 secs to reboot and also check in Settings-About phone-Status
And please report back
Sent from my LG-P760 using xda app-developers app

N00BY0815 said:
Try the following:
I first flashed the ROM released in October 2013, then rooted and installed TWRP.
Then:
Delete Sysscope data
Stop the process
Stop Enterprise vpn (not sure, if this is necessary)
Delete Enterprise sysscope data
Shut your tablet down,
Reboot to upload mode, enter it and check for the change, then hold the powerbutton for 10 secs to reboot and also check in Settings-About phone-Status
And please report back
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Did it but it didn't help, would probably have been too easy . Still 2 Flashs and both on "custom". In settings, too. I don't care too much about it, but if you'd like me to try something else, I'll try to help.
EDIT:
I did find this though: http://forum.xda-developers.com/showthread.php?t=2315942
Maybe I'll check it out later.
---------- Post added at 08:00 PM ---------- Previous post was at 07:40 PM ----------
k.aibutsu said:
I did find this though: http://forum.xda-developers.com/showthread.php?t=2315942
Maybe I'll check it out later.
Click to expand...
Click to collapse
I tried it - did't kill my phone but now I can't access "Settings". This seems like a good time to try your Backup...is it for the T210? Can I flash it via CWM or do I need TWRP?

Mine is made via TWRP and is forthe 210 version. Ill upload it, one it get to it and poat a link here. If I forget it, please PM me after lets say 12 hours
Sent from my LG-P760 using xda app-developers app

N00BY0815 said:
Mine is made via TWRP and is forthe 210 version. Ill upload it, one it get to it and poat a link here. If I forget it, please PM me after lets say 12 hours
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
After flashing stock I tried your rooting method but it did't work... I also found this: http://forum.xda-developers.com/showthread.php?t=1886460 wich was originally designed for Sony Phones but is reported to work on Samsung devices, too. Unfortunately it didn't work for me either...
I flashed CWM (from the forums) and rooted via CWM afterwards. Continuing with CM 10.2 now

U could also root the tab 3 t210 using cydia impactor. It didnt increase my flash counter since this tool uses adb to root although u have to install busy box and superuser apk from play store
Sent from my SM-T210 using xda app-developers app
---------- Post added at 10:41 PM ---------- Previous post was at 10:40 PM ----------
U could also root the tab 3 t210 using cydia impactor. It didnt increase my flash counter since this tool uses adb to root although u have to install busy box and superuser apk manually from play store.
Sent from my SM-T210 using xda app-developers app

It works! I just gained root permissions on my new gtab
Thank you N00BY0815 !!!

[email protected] said:
It works! I just gained root permissions on my new gtab
Thank you N00BY0815 !!!
Click to expand...
Click to collapse
Does this mean that my current sm-t210 (in fw 4.1.2) which is stock and non rooted can be rooted without losing warranty ?
and the mention about a chinese superuser is easy to "repair" and get back my French status ?
Or what about this other method from Ironman38102:
U could also root the tab 3 t210 using cydia impactor. It didnt increase my flash counter since this tool uses adb to root although u have to install busy box and superuser apk from play store
Click to expand...
Click to collapse
Ironman38102 : could you detail the procedure ? I'm very intrested in any mean to root my tablet without losing warranty..
ricorico94

ricorico94 said:
Does this mean that my current sm-t210 (in fw 4.1.2) which is stock and non rooted can be rooted without losing warranty ?
and the mention about a chinese superuser is easy to "repair" and get back my French status ?
Or what about this other method from Ironman38102:
Ironman38102 : could you detail the procedure ? I'm very intrested in any mean to root my tablet without losing warranty..
ricorico94
Click to expand...
Click to collapse
First make sure all the drivers are installed then go to this website http://www.cydiaimpactor.com/ and download the tool. Then launch the tool and u may see option #drop supersu etc. Etc. And then press start. After when its completed download and install supersu then download busybox and install busybox via busy box app.
Done(Hope I was clear enough)
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)

Ironman38102 said:
First make sure all the drivers are installed then go to this website http://www.cydiaimpactor.com/ and download the tool. Then launch the tool and u may see option #drop supersu etc. Etc. And then press start. After when its completed download and install supersu then download busybox and install busybox via busy box app.
Done(Hope I was clear enough)
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)
Click to expand...
Click to collapse
Thanks.
In Cydiaimpactor, do we need to change anyoption ? (you mention "#drop supersu, etc." : do we need such options or just leave them as they are ?)
Is it the cydiaimpactor which is allowing root, or the supersu and busybox ? Those apps (busybox and supersu) are supposed to require root, but I didn't know they are used to root.
ricorico94

ricorico94 said:
Thanks.
In Cydiaimpactor, do we need to change anyoption ? (you mention "#drop supersu, etc." : do we need such options or just leave them as they are ?)
Is it the cydiaimpactor which is allowing root, or the supersu and busybox ? Those apps (busybox and supersu) are supposed to require root, but I didn't know they are used to root.
ricorico94
Click to expand...
Click to collapse
Leave them as they are and when u run that tool it roots ur device but does not install the busybox and superuser so install those after u run cydia impactor.
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)

Ironman38102 said:
Leave them as they are and when u run that tool it roots ur device but does not install the busybox and superuser so install those after u run cydia impactor.
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)
Click to expand...
Click to collapse
I downloaded cydiaimpactor, but It doesn't find my device. When I connect tablet on PC, the PC can see the tablet. Just in case, I downloaded some drivers (not found on samsung which apprently only lists in downloads some manuals.. but google drove me to some pages with samsung drivers) and my PC can discuss with tablet.
But when clicking "start" in Cydia, I receive an error message "no device found" and if I tru the USB/scan menu, I also receive an error message "no such device". Any idea ?
Cydia had no installer, so I unzipped all files in a temporary folder (c:\temp\cydiaimpactor) and double click on the .exe .
ricorico94

ricorico94 said:
I downloaded cydiaimpactor, but It doesn't find my device. When I connect tablet on PC, the PC can see the tablet. Just in case, I downloaded some drivers (not found on samsung which apprently only lists in downloads some manuals.. but google drove me to some pages with samsung drivers) and my PC can discuss with tablet.
But when clicking "start" in Cydia, I receive an error message "no device found" and if I tru the USB/scan menu, I also receive an error message "no such device". Any idea ?
Cydia had no installer, so I unzipped all files in a temporary folder (c:\temp\cydiaimpactor) and double click on the .exe .
ricorico94
Click to expand...
Click to collapse
Try reinstalling the drivers by connecting it in a different usb port. It will search and install the drivers then try again

Ironman38102 said:
Try reinstalling the drivers by connecting it in a different usb port. It will search and install the drivers then try again
Click to expand...
Click to collapse
I'm stupid... I had forgotten to enable "usb debug".. Once enabled, I run cydia with same error, but retrying 1 minute later, it worked !
After cydia, I did not install supersu, but only rootkeeper, which detected the tablet as rooted.
What is the advantage of supersu ? Description lists many features, but are those really helpfull when usage is not to develop but rather to enable use of apps such as adblocking, security, etc. ?
Thanks a lot for your help, and bravo for having found and published ths method which allows my device to remain with "official" status !
ricorico94

ricorico94 said:
I'm stupid... I had forgotten to enable "usb debug".. Once enabled, I run cydia with same error, but retrying 1 minute later, it worked !
After cydia, I did not install supersu, but only rootkeeper, which detected the tablet as rooted.
What is the advantage of supersu ? Description lists many features, but are those really helpfull when usage is not to develop but rather to enable use of apps such as adblocking, security, etc. ?
Thanks a lot for your help, and bravo for having found and published ths method which allows my device to remain with "official" status !
ricorico94
Click to expand...
Click to collapse
U need supersu and busybox for most scripts and apps here in xda and playstore so I suggest you install it. Also pressing thanks is alot better than saying it

[Q] Videocon A45 - Android Phone Status Bar missing n Phone keeps Restarting itself.

Videocon A45 - Android Phone Status Bar missing and Phone keeps Restarting itself.
My Videocon A45 Android v2.3.5 Phone keeps restarting on itself....
Also, when it starts "sometimes", it shows (com.systemui process error) and asks to force close ..... i see that the status/ notification bar on top which displays your battery, connections, usb connections n all, is missing.
I have Rooted my device.
This problem started soon as i was using root uninstal software and i was backing up some apps and uninstalling them to free up some internal storage...
but i guess i have uninstalled some, which i shouldnt have...
Please tell me if you need some more information to solve this problem....
Please please help me out with this Thank You...

AndroidifiedPratik said:
Videocon A45 - Android Phone Status Bar missing and Phone keeps Restarting itself.
My Videocon A45 Android v2.3.5 Phone keeps restarting on itself....
Also, when it starts "sometimes", it shows (com.systemui process error) and asks to force close ..... i see that the status/ notification bar on top which displays your battery, connections, usb connections n all, is missing.
I have Rooted my device.
This problem started soon as i was using root uninstal software and i was backing up some apps and uninstalling them to free up some internal storage...
but i guess i have uninstalled some, which i shouldnt have...
Please tell me if you need some more information to solve this problem....
Please please help me out with this Thank You...
Click to expand...
Click to collapse
I think you uninstalled some system apps. May be the systemUI.apk , it is the one which is responsible for the status bar.
Hit thanks rather than typing it now Free

parkourkarthik said:
I think you uninstalled some system apps. May be the systemUI.apk , it is the one which is responsible for the status bar.
Hit thanks rather than typing it
Click to expand...
Click to collapse
what can I do to fix this....Please tell me.... Thank you for replying...!

AndroidifiedPratik said:
what can I do to fix this....Please tell me.... Thank you for replying...!
Click to expand...
Click to collapse
You should have had a backup of your systemUI else at least a nandroid backup.
It seems you don't have a Custom recovery like cwm.
Also you don't have the systemUI backup i think.
Other choices as you don't have backups-
Search for your device's CWM try to flash it & then find a custom Rom for your device and flash it.
Another way is that ask some of the members with the same device as yours for the systemUI.apk and push it into the /system/app either with the help of adb or CWM through aroma filemanager.:thumbup:
Please do a little search on what i am suggesting and try to learn & do as i can't post all the methods step by step in a single post.
Hit thanks rather than typing it now Free

parkourkarthik said:
You should have had a backup of your systemUI else at least a nandroid backup.
It seems you don't have a Custom recovery like cwm.
Also you don't have the systemUI backup i think.
Other choices as you don't have backups-
Search for your device's CWM try to flash it & then find a custom Rom for your device and flash it.
Another way is that ask some of the members with the same device as yours for the systemUI.apk and push it into the /system/app either with the help of adb or CWM through aroma filemanager.:thumbup:
Please do a little search on what i am suggesting and try to learn & do as i can't post all the methods step by step in a single post.
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. Karthik, as i mentioned in the first post, that my phone starts sometimes, it did now , and i checked for the SystemUI.apk (Status Bar) ,
2. i find that it has not been uninstalled,
3. it is there, also i have backed it up using Root Uninstaller software to my SD card....!
4. It shows on my SD Card..
5. Also please let me know, whether factory reset can solve this (i dont mind losing the data, its jus been 2 weeks i have bought it )
6. Also, please tell me, does unrooting my phone help to fix this...??
7. I have not used ClockworkMod in any ways...
8. Please please help me sir.... my first android phone and has just been less than 2 weeks i bought it... Please help me Sir...! Thank you....

AndroidifiedPratik said:
1. Karthik, as i mentioned in the first post, that my phone starts sometimes, it did now , and i checked for the SystemUI.apk (Status Bar) ,
2. i find that it has not been uninstalled,
3. it is there, also i have backed it up using Root Uninstaller software to my SD card....!
4. It shows on my SD Card..
5. Also please let me know, whether factory reset can solve this (i dont mind losing the data, its jus been 2 weeks i have bought it )
6. Also, please tell me, does unrooting my phone help to fix this...??
7. I have not used ClockworkMod in any ways...
8. Please please help me sir.... my first android phone and has just been less than 2 weeks i bought it... Please help me Sir...! Thank you....
Click to expand...
Click to collapse
Any methods that i know couldn't help you AFAIK.
Coz there are ways complex for you to get into right now. (such as taking logcat through adb, finding & debugging the problem)
Better try to give it in service center, and don't say that you rooted the device.
They can easily flash a fresh firmware for your device.
All the best:thumbup:
Hit thanks rather than typing it now Free

parkourkarthik said:
Any methods that i know couldn't help you AFAIK.
Coz there are ways complex for you to get into right now. (such as taking logcat through adb, finding & debugging the problem)
Better try to give it in service center, and don't say that you rooted the device.
They can easily flash a fresh firmware for your device.
All the best:thumbup:
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. The service center people will directly know that the device is rooted, coz as i said my device starts up and functions normally for sometime, and i can see root apps on the menu, superSU, RootUninstaller , Titanium Backup and all... and I would like to keep it as last option to go to service center, they would take too long to solve this...
2. Do you suggest Uninstalling these root apps first....?
3. Do you suggest Unrooting my device before i take it to the service center...? coz i had read that they wont know that it was rooted then..
4. How do you take logcat through android debugging , find & debug the problem-- What do i require to do this, i mean the required softwares n all....
5. i also have the com.android.acore unexpectedly closed error... i cannot access call functions as well....
6. What are the probable causes for this problem........ ? Thank you..!

AndroidifiedPratik said:
1. The service center people will directly know that the device is rooted, coz as i said my device starts up and functions normally for sometime, and i can see root apps on the menu, superSU, RootUninstaller , Titanium Backup and all... and I would like to keep it as last option to go to service center, they would take too long to solve this...
2. Do you suggest Uninstalling these root apps first....?
3. Do you suggest Unrooting my device before i take it to the service center...? coz i had read that they wont know that it was rooted then..
4. How do you take logcat through android debugging , find & debug the problem-- What do i require to do this, i mean the required softwares n all....
5. i also have the com.android.acore unexpectedly closed error... i cannot access call functions as well....
6. What are the probable causes for this problem........ ? Thank you..!
Click to expand...
Click to collapse
2. Yes
3. Yes
4. Your device's usb drivers, adt or just the platform tool folder & Time to research.
6. I can't say for sure
Hit thanks rather than typing it now Free

parkourkarthik said:
2. Yes
3. Yes
4. Your device's usb drivers, adt or just the platform tool folder & Time to research.
6. I can't say for sure
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. Please provide download links for Android Developement Tool, is it universal for all devices or like clockworkmod coz i coudnt find CWM for my device.
2. What do you mean by, "just the platform tool folder", what is it??
3. Actually, i want to try fix this myself, i am ready to spend time on this, and not willing to go to service center as i said above, they take like for ever...
4. Thank you...!

AndroidifiedPratik said:
1. Please provide download links for Android Developement Tool, is it universal for all devices or like clockworkmod coz i coudnt find CWM for my device.
2. What do you mean by, "just the platform tool folder", what is it??
3. Actually, i want to try fix this myself, i am ready to spend time on this, and not willing to go to service center as i said above, they take like for ever...
4. Thank you...!
Click to expand...
Click to collapse
Try a data/cache wipe first & check whether it gets solved..
1. Google it as 'download adt'.
2. It can be said as adb environment. It's a part of adt.
Hit thanks rather than typing it now Free

parkourkarthik said:
Try a data/cache wipe first & check whether it gets solved..
1. Google it as 'download adt'.
2. It can be said as adb environment. It's a part of adt.
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. I did wipe cache partition and also I did wipe data/factory reset...
2. And now my phone is stuck on "Welcome to videocon A45 - Touch the Android to begin" Screen...
3. When I do touch the Android Logo it just glows and nothing happens... the animation of a hand demonstrating the touching goes on and on..
4. I dont know what to do ...Please help..!
5. Can I Unroot the device now...?
6. I did download the ADT Bundle... 480Mb size... I will install it ... How do I use it..??
Thank you.

AndroidifiedPratik said:
1. I did wipe cache partition and also I did wipe data/factory reset...
2. And now my phone is stuck on "Welcome to videocon A45 - Touch the Android to begin" Screen...
3. When I do touch the Android Logo it just glows and nothing happens... the animation of a hand demonstrating the touching goes on and on..
4. I dont know what to do ...Please help..!
5. Can I Unroot the device now...?
6. I did download the ADT Bundle... 480Mb size... I will install it ... How do I use it..??
Thank you.
Click to expand...
Click to collapse
please reply karthik....!

hey i gave it to the service center,... they fixed right away thanks....!:good:

How to root the Zte n9520 aka ZTE Boost Max

Note: So far there is no custom recovery for this device yet as soon as one is available i will update my post and write a guide for you to follow to install. If you have any question feel free to Private message me or email me at [email protected]. With this being said lets start the guide on rooting the New boost max.
Step 1. We want to make sure that you turn on USB Debug on your phone under development settings in settings tab.
Step 2. Plug in your device nd select install ZTE drivers on your phone.
Step 3. If your pc doesnt recognize the phone click here for zte driver
support.zte.com.cn/support/%28S%28ct55nzeou0okp055palpbk45%29%29/news/NewsDetail.aspx?newsId=1000442
(if it doesnt allow you to click on it then copy and paste it on your browser)
Step 4. Once you have all drivers install and you pc recognizes your phone go on your browser and download an app call kingo. The app can be found here
kingoapp.com
Step 5. Once you download and install kingo app open u kingo and give it a sec to recognize the phone. Once it does select root and let the pc do its thing. Once the phone is rooted it will restart and ask you for superuser permissions, at this point select grant and your phone will be rooted. Open Superuser pp and install binaries onto the phone once you do that i suggest you go onto the play store and update the superuser app.
This is it now your new zte boost max is rooted and we are just waiting on a custom recovery to arise or i will work on one and upload it here on this post for you. I do have a spare zte max phone i can work on to try everything i can on it so dont worry hopefully real soon i will have it. Now i worked mostly on Samsung phones Unlocking and flashing repairing imeis so building custom recovery is quite new for me but i promise to work hard. Thanks And enjoy And sorry for some reason the xda is not letting me post url links since im a new member so until i become n old member i cant write www in front of any links. I know its stupid lol

thanks so much bro its good to see someones working on this

Hey there..thanks for this post. I actually went on the new devices forum and requested that they add the device. It's been a good phone and responds well.
Sent from my N9520 using XDA Premium HD app

Progress?
damaso1986 said:
Note: So far there is no custom recovery for this device yet as soon as one is available i will update my post and write a guide for you to follow to install. If you have any question feel free to Private message me or email me at [email protected].
Click to expand...
Click to collapse
Have you been able to make any progress on the custom recovery or roms?

zte max
can somone help me i rooted the zte max but still cant find an app for hotspot / internet sharing

Having the same problem, have installed over 20 apps and none seem to work.
Sent from my N9520 using xda app-developers app

Max
nice it work for my zte max thanks alot , was very easy

guzman953 said:
nice it work for my zte max thanks alot , was very easy
Click to expand...
Click to collapse
what was the original settings cause i cant get my wifi to work at home
---------- Post added at 10:02 PM ---------- Previous post was at 09:57 PM ----------
does anyone have the setting before the wifi tether change

Custom Recovery By Philz
Well I didn't get to create the custom recovery however thanks to a friend I was able to flash a recovery that did work on the device. I am uploading the recovery there is a set of instructin tat is required to flash it but I found a better faster way that you can even do it without a pc really. So first you are going to want to download the recovery I uploaded. Once you have it downloaded you are going to extract the file to the root of your sd card or your phone (I think I had it on both just incase it didn't work on one) then after you have it on your phone you are going to take off your computer and open up play store and search for an app called FLASHIFY and install it on your phone. When you open flashify its going to ask you to grant permission grant it. Then agree with disclaimer. Okay once in the main app you will see boot image and recovery image and zip file. You are going to click on recovery image a pop up will ask choose a file download twrp download cwm cancel you are going to click on choose file. Scroll down til you see sdcard click on that. Now when you scroll down you should see the recovery img you copied in there you will know its the image because right next to it there will be a circle with the lighting on it. you are going to click on that. Its going to ask you if you want to flash that file you are going to select yup! and once it done it will ask you if you want to reboot or continue select reboot now it will reboot into your new recovery. Thanks a lot George for finding the recovery for me. Im still going to work on a twrp I think its more stable and I never use philz recovery but its really nice.
ps Well for some reason the file is not uploading so im am going to see if I can copy the link on here it migt not let me let see
androidforums.com/iconic-phablet-all-things-root/832497-recovery-philz-touch-6-19-2-need-testers.html

boost max will tether 3g but not 4g
I have the phone rooted with no problems, but i have installed wi fi for rooted phones and barnacle and when use either one of those tether programs, they only tether in 3g but will not tether in 4g. i have verified that 4g does work directly from the phone when i run the speed test but when i run the same speed test from my tether device, it only test in 3g. any suggestions?

Follow the tutorial that is a few posts back in this tired.
Sent from my N9520 using xda app-developers app
---------- Post added at 03:05 PM ---------- Previous post was at 02:18 PM ----------
damaso1986 said:
Well I didn't get to create the custom recovery however thanks to a friend I was able to flash a recovery that did work on the device. I am uploading the recovery there is a set of instructin tat is required to flash it but I found a better faster way that you can even do it without a pc really. So first you are going to want to download the recovery I uploaded. Once you have it downloaded you are going to extract the file to the root of your sd card or your phone (I think I had it on both just incase it didn't work on one) then after you have it on your phone you are going to take off your computer and open up play store and search for an app called FLASHIFY and install it on your phone. When you open flashify its going to ask you to grant permission grant it. Then agree with disclaimer. Okay once in the main app you will see boot image and recovery image and zip file. You are going to click on recovery image a pop up will ask choose a file download twrp download cwm cancel you are going to click on choose file. Scroll down til you see sdcard click on that. Now when you scroll down you should see the recovery img you copied in there you will know its the image because right next to it there will be a circle with the lighting on it. you are going to click on that. Its going to ask you if you want to flash that file you are going to select yup! and once it done it will ask you if you want to reboot or continue select reboot now it will reboot into your new recovery. Thanks a lot George for finding the recovery for me. Im still going to work on a twrp I think its more stable and I never use philz recovery but its really nice.
ps Well for some reason the file is not uploading so im am going to see if I can copy the link on here it migt not let me let see
androidforums.com/iconic-phablet-all-things-root/832497-recovery-philz-touch-6-19-2-need-testers.html
Click to expand...
Click to collapse
Worked perfectly!

This worked perfectly for me a few moments ago!

Rom
Now all we need are some custom roms! :fingers-crossed:

phone will only tether 3g but not 4g
I have the phone rooted with no problems, but i have installed wi fi for rooted phones and barnacle and when use either one of those tether programs, they only tether in 3g but will not tether in 4g. i have verified that 4g does work directly from the phone when i run the speed test but when i run the same speed test from my tether device, it only test in 3g. any suggestions?

Has anyone tried, Can this device work on T-mobile?

If I root my Max will lose Test Msgs.
I want to root my boost max but i want to know if I do will it erase all the text msgs I have
already saved. Thank you!

Please can anyone help in getting MSL for this phone? If possible at all.

need help kingo won't recognize my device installed drivers from phone it didnt work then tried the one from the site you pasted still didn't recognize my phone

Nope....
damaso1986 said:
Note: So far there is no custom recovery for this device yet as soon as one is available i will update my post and write a guide for you to follow to install. If you have any question feel free to Private message me or email me at [email protected]. With this being said lets start the guide on rooting the New boost max.
Step 1. We want to make sure that you turn on USB Debug on your phone under development settings in settings tab.
Step 2. Plug in your device nd select install ZTE drivers on your phone.
Step 3. If your pc doesnt recognize the phone click here for zte driver
support.zte.com.cn/support/%28S%28ct55nzeou0okp055palpbk45%29%29/news/NewsDetail.aspx?newsId=1000442
(if it doesnt allow you to click on it then copy and paste it on your browser)
Step 4. Once you have all drivers install and you pc recognizes your phone go on your browser and download an app call kingo. The app can be found here
kingoapp.com
Step 5. Once you download and install kingo app open u kingo and give it a sec to recognize the phone. Once it does select root and let the pc do its thing. Once the phone is rooted it will restart and ask you for superuser permissions, at this point select grant and your phone will be rooted. Open Superuser pp and install binaries onto the phone once you do that i suggest you go onto the play store and update the superuser app.
This is it now your new zte boost max is rooted and we are just waiting on a custom recovery to arise or i will work on one and upload it here on this post for you. I do have a spare zte max phone i can work on to try everything i can on it so dont worry hopefully real soon i will have it. Now i worked mostly on Samsung phones Unlocking and flashing repairing imeis so building custom recovery is quite new for me but i promise to work hard. Thanks And enjoy And sorry for some reason the xda is not letting me post url links since im a new member so until i become n old member i cant write www in front of any links. I know its stupid lol
Click to expand...
Click to collapse
Hmmmm. I've tried to ROOt my ZTE MAX 4 times I've followed these steps precisely as instructed..
first 3 times I received error : ROOT Faile Conecctionunstabli, last time I received ROOT Failed Script Error...
I'm using a PC with Windows 7, New phone, pc auto read phone and downloaded drivers..so whts the problem???

guzman953 said:
can somone help me i rooted the zte max but still cant find an app for hotspot / internet sharing
Click to expand...
Click to collapse
Foxfi in the play store works pretty well for me across all my devices without hotspot or USB tethering....it also use Bluetooth to share your network like a VPN