Database Info

[Q]Restoring back to ODIN problem

I was going back from AOKP to Stock gingerbread Rogers (as i am a canadian owner) and its just stuck at factoryfs.rfs.
Any help?

Read thru the one click to stock section and the odin section in the iset page...see my links on my signature...

I have the Rogers infuse though... would that still work? i cant see a one click thats for the rogers everything i see is for att. :S
and im also using this trhread http://forum.xda-developers.com/showthread.php?t=1193927 so i think this is the absolute last resort :/

now it got to this point:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.rfs
<ID:0/006> Complete(Write) operation failed.
after like an hour of waiting :/

please someone help

Have you tried re downloading..odin...and try again?

yes i have. i have every version of odin at the moment and tested on 2 different computers just havent worked like anywhere

also, if it helps, my phone does not even turn on unless it's on download mode...... am i ****ed enough?

Cannot figure out this brick...

I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.

heyitsdan03 said:
I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.
Click to expand...
Click to collapse
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III

corbn89 said:
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III
Click to expand...
Click to collapse
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

heyitsdan03 said:
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.

corbn89 said:
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.
Click to expand...
Click to collapse
Yes i tried to flash just the root66 and this is what i get:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)
And i also tried the other guys post and this is what i get there:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)

What were you doing when it hung at the Verizon splash screen(what caused the brick)?

letinsh said:
What were you doing when it hung at the Verizon splash screen(what caused the brick)?
Click to expand...
Click to collapse
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it

heyitsdan03 said:
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it
Click to expand...
Click to collapse
Have you tried resetting the phone via the stock recovery?

corbn89 said:
Have you tried resetting the phone via the stock recovery?
Click to expand...
Click to collapse
stock recovery wont boot

you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?

letinsh said:
you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?
Click to expand...
Click to collapse
Yes, recovery wont boot but i can get into download mode, and i am using odin 3.07

Maybe this will help, i tried for the hell of it to boot normal and now it will go past the splash screen and come up to an "encryption failed" error with a reset button. The reset button does nothing..

have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).

Yes i just tried again and nothing... and no i dont have kies even installed

letinsh said:
have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).
Click to expand...
Click to collapse
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

heyitsdan03 said:
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the file you mentioned in the OP or the one I just pointed you to (different files)?

That last one was the file you pointed to me and yes they were different files, neither one work.

Flash this (stock bootchain) in PDA: http://truelinux.net/sch-i535/bootchains/BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5
then download this (stock rom), unzip it, and flash in PDA:
http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip
Having so many files fail with an Odin flash makes me think the error is caused by something else, though...

What else could it be?
Sent from my SAMSUNG-SGH-I747 using xda premium

Honestly, we've reached the limit of my experience. Must issues with Odin result from the physical connection. I know you tried different cords and different ports. I assume you're doing this, but make sure your usb cable is plugged into a port on the motherboard, not a hub or remote port.
I honestly don't know what the next step is... Reinstall drivers and Odin?
Sent from my SCH-I535 using xda app-developers app

note 10.1 is blocked in booting

hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

3achour said:
hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load

I'd agree with that.
I find it best to download the roms from Sammobile as they generally provide an MD5 sum you can check to make sure its not a bad download. Especially when using ODIN 4.03/07... ODIN 4.03 does the check before it flashes and ODIN 4.07 checks when the .tar file is selected.

temp
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "

erica_renee said:
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load
Click to expand...
Click to collapse
I have not access in the recovery mode

3achour said:
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "
Click to expand...
Click to collapse
odin did not finish the installation process about 2 hours and even post thank you for helping me

You need to download the rom again to see if it's not a corrupted copy. Use a PC to download it from sammobile.com.
If the flash file you are using is corrupt you can flash it til this century ends and it won't work...
If it still doesn't get past nand write then I believe you may need a pit file to repartition your internal memory. THIS IS A VERY DANGEROUS OPERATION. Make sure you have the correct pit file and if possible get it with an MD5 checksum so you know there is nothing wrong with the downloaded file. It MUST be for your device or bricking may occur, it MUST not be corrupted or bricking will occur.
Good luck and remember, you have been warned...

[Q] I717 Odin Flash help; What's wrong?

I've soft bricked my Galaxy Note I717 3 times in the last week while trying to update to the Jellybean firmware. Samsung Kies does not work. It says that there was a communication error during the upgrade process, whatever that means. I took it to the ATT store and they revived it within a few minutes with no data loss. This happened twice. I just tried to manually flash the update using odin, but I get this message:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> amss.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> mdm.bin
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I'm stuck in download mode. I tried to flash the Jellybean ROM again, but it stops right there. I'm currently runnin the stock ICS firmware. Any suggestions?

Beastmutt said:
I've soft bricked my Galaxy Note I717 3 times in the last week while trying to update to the Jellybean firmware. Samsung Kies does not work. It says that there was a communication error during the upgrade process, whatever that means. I took it to the ATT store and they revived it within a few minutes with no data loss. This happened twice. I just tried to manually flash the update using odin, but I get this message:
Initialzation..
Get PIT for mapping..
Firmware update start..
amss.bin
NAND Write Start!!
boot.img
cache.img.ext4
mdm.bin
recovery.img
system.img.ext4
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Now I'm stuck in download mode. I tried to flash the Jellybean ROM again, but it stops right there. I'm currently runnin the stock ICS firmware. Any suggestions?
Click to expand...
Click to collapse
So what are you flashing exactly and what slot are you placing it in?
Sent from my CLEAN Note ll

[Q] SGZ(R) Fail

Lord professionals help pliz in my trouble, I'll start with introductions, briefly talked on the phone and then put to work properly, I decided to call and everything! zero emotion - is dead. Reinstated in the post http://forum.xda-developers.com/showpost.php?p=23213275&postcount=1 helped even enters the firmware decided sewn through ODIN 3, but it was not there at all writes
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone red tex:
Partition size is small!! Bin:2060608(4KB) Part:131072(4КB)
WriteExt4Partition: Error to OpenComExt4! err:0xa
DownloadPartition_odin: Error to WriteExt4Partition.
Tegra_Nand_Write: Error DowloadPartition Odin: err:0xfffffff
Help the guys the reason. And even if the firmware gets very hot and starts around week then have to reboot image SOFTWARE TO FAIL for a few seconds and restart again. and all this with a connected cable. When reclined cable phone does not start.
Tried firware 2.3.4 Russian, 2.3.5 Germany, 2.3.6 China
Before that Germany stood 2.3.5 + Root + CWM from April

vagnyj said:
Lord professionals help pliz in my trouble, I'll start with introductions, briefly talked on the phone and then put to work properly, I decided to call and everything! zero emotion - is dead. Reinstated in the post http://forum.xda-developers.com/showpost.php?p=23213275&postcount=1 helped even enters the firmware decided sewn through ODIN 3, but it was not there at all writes
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone red tex:
Partition size is small!! Bin:2060608(4KB) Part:131072(4КB)
WriteExt4Partition: Error to OpenComExt4! err:0xa
DownloadPartition_odin: Error to WriteExt4Partition.
Help the guys the reason. And even if the firmware gets very hot and starts around week then have to reboot image SOFTWARE TO FAIL for a few seconds and restart again. and all this with a connected cable. When reclined cable phone does not start.
Tried firware 2.3.4 Russian, 2.3.5 Germany, 2.3.6 China
Before that Germany stood 2.3.5 + Root + CWM from April
Click to expand...
Click to collapse
use odin V1.85 for GB. Also, close all other link like kies etc.
Thanks,
Disturbed™
Sent from my Disturbed™ Galaxy S4 using Tapatalk (VIP)
______________________________________________________
Wait for my time, U gonna pay for what U have done. - Disturbed™

Disturbed™ said:
use odin V1.85 for GB. Also, close all other link like kies etc.
Click to expand...
Click to collapse
did just odin v.1.85 full name ODIN3 v.1.85 kies is not installed. flash drive and the sim is missing, just before 20 software and had no problems, but here the error, really hot, I suspect the hardware can welled as COOL phone firmware increases as the process is heated so immediately resets and restarts the circle
the more frightening message on screen display
Partition size is small!! Bin:2060608(4KB) Part:131072(4КB)
WriteExt4Partition: Error to OpenComExt4! err:0xa
DownloadPartition_odin: Error to WriteExt4Partition.
Tegra_Nand_Write: Error DowloadPartition Odin: err:0xfffffff .

vagnyj said:
did just odin v.1.85 full name ODIN3 v.1.85 kies is not installed. flash drive and the sim is missing, just before 20 software and had no problems, but here the error, really hot, I suspect the hardware can welled as COOL phone firmware increases as the process is heated so immediately resets and restarts the circle
the more frightening message on screen display
Partition size is small!! Bin:2060608(4KB) Part:131072(4КB)
WriteExt4Partition: Error to OpenComExt4! err:0xa
DownloadPartition_odin: Error to WriteExt4Partition.
Tegra_Nand_Write: Error DowloadPartition Odin: err:0xfffffff .
Click to expand...
Click to collapse
are u sure u r flashing Galaxy R firmware only? its partition size issue. btw if yes, then check downloaded firmware file. it may b bad.
Thanks,
Disturbed™
Sent from my Disturbed™ Galaxy S4 using Tapatalk (VIP)
______________________________________________________
Wait for my time, U gonna pay for what U have done. - Disturbed™

Disturbed™ said:
are u sure u r flashing Galaxy R firmware only? its partition size issue. btw if yes, then check downloaded firmware file. it may b bad.
Click to expand...
Click to collapse
Thank you very much cured installing firmware multifile china I9103ZCKJ3