Having a rather annoying problem.
I decided to give the ICS leak a try, and did as instructed: Cleaned the cache & system files in recovery after making a backup, booted into download mode, used Odin to install the ICS Leak. Everything was working flawlessly. Booted back into download mode to install CWM Recovery. After about 5 minutes of nothing happening, my computer BSOD'ed on me with a memory leak error.
Here's where the problem started; I rebooted my phone, and the download mode was different, the "error" version:
"ODIN MODE
Product Name: SGH-I727
Custom Binary: No
Current Binary: Samsung Official
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I've looked into it extensively, and tried several different methods. The first thing I tried was uninstalling the drivers on my computer, restarting, installing the drivers again, and reisntalling. Than I tried using the stock tar file for Odin. BDOD occurred with the same error.
Tried switching USB ports and USB cable, and doing the above again, but the same BSOD occurred.
I've also tried just flashing the stock Kernel, and again the same thing.
I've tried about 8, maybe 9 different methods. I've never had a BSOD on this computer (Asus G73SW running Windows 7). I'm not sure if I'm just having really bad luck, or doing something wrong, but I could really use some new recommendations on what to try. :/
Thanks!
Try a different computer. I can't see any reason ODIN would cause a BSOD. Has to be something on ur machine. Try killing everything on startup and disable any AV and give it another try.
<insert witty signature here>
I made the silly mistake of not checking the md5 when flashing ics. Got the same error. I had an incomplete version that was malfunctioning. Dont worry, its fixable. First off, use a different pc.Download the ics one click and flash again. Once running flash root with odin. The important thing is to use a different pc (its probably not odin)
Also, this is a dev section. Odds are this will be closed. Next time post in general or Q&A.
Sent from my SAMSUNG-SGH-I727 using xda premium
orionl said:
Having a rather annoying problem.
I decided to give the ICS leak a try, and did as instructed: Cleaned the cache & system files in recovery after making a backup, booted into download mode, used Odin to install the ICS Leak. Everything was working flawlessly. Booted back into download mode to install CWM Recovery. After about 5 minutes of nothing happening, my computer BSOD'ed on me with a memory leak error.
Here's where the problem started; I rebooted my phone, and the download mode was different, the "error" version:
"ODIN MODE
Product Name: SGH-I727
Custom Binary: No
Current Binary: Samsung Official
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I've looked into it extensively, and tried several different methods. The first thing I tried was uninstalling the drivers on my computer, restarting, installing the drivers again, and reisntalling. Than I tried using the stock tar file for Odin. BDOD occurred with the same error.
Tried switching USB ports and USB cable, and doing the above again, but the same BSOD occurred.
I've also tried just flashing the stock Kernel, and again the same thing.
I've tried about 8, maybe 9 different methods. I've never had a BSOD on this computer (Asus G73SW running Windows 7). I'm not sure if I'm just having really bad luck, or doing something wrong, but I could really use some new recommendations on what to try. :/
Thanks!
Click to expand...
Click to collapse
Wrong section
Sent from my SAMSUNG-SGH-I727 using Tapatalk
nrm5110 said:
Wrong section
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
skrambled said:
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
Click to expand...
Click to collapse
Lol.. gotta admit, worked on me ;-)
Sent from my SAMSUNG-SGH-I727 using xda premium
skrambled said:
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
Click to expand...
Click to collapse
I'm sorry I let you down lol I am TRYING to be nicer since people are getting butt hurt and calling me out as the lone troll haha I don't want to turn us into t989
Sent from my SAMSUNG-SGH-I727 using Tapatalk
skrambled said:
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
Click to expand...
Click to collapse
I think you mean the ban hammer...:-D
rabbivj said:
I think you mean the ban hammer...:-D
Click to expand...
Click to collapse
I'm what you would call the banimal
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Related
I tried going back to gingerbread using Heimdall 1 click and it gives me a kernel error and failed. Now phone won't boot past the rogers logo. Any suggestions? No samsung screen. No green battery indicator when plugged in. Heimdall does detect the phone, and I've tried all USB ports and cords at my disposal. I use a mac so no access to odin. This is the first brick I haven't been able to get myself out of. Any help you would be appreciated
I am a gt i9000 owner, but can you get into download mode?
Sent by Santa Clause
If you can get download mode, then flash a gingerbread stock rom, even if it means you will lose root still do it, then flash a new rom of your choice, if you can get into download mode then you haven't got a brick
Sent by Santa Clause
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
http://forum.xda-developers.com/showthread.php?t=1293751
bigjoe2675 said:
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
Click to expand...
Click to collapse
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
teknhard said:
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
Click to expand...
Click to collapse
Hummmm..ok
Let's step back here does out prompt you for drivers?
....you might have to make a stop at your office..
Try different USB ports, I used heimdall yesterday to go back to gingerbread (so I could get the boot loaders) and I had the same problem as you, I finally got it to work with a different USB port and even then it kept failing...but I just kept trying and eventually it went through
(Pull battery, place battery back in, hold volume up and down, plug USB in-should put you in download mode...even if you can't see anything on your screen you can still enter download mode)
Sent from my SGH-I997 using XDA
DOesnt prompt me for drivers. It detects my phone and says ready to flash. I see the download mode screen. so its not completey screwed. Just can't get past the rogers logo.. I only have two USB on my macbook.. tried both quite a few times guess i'll mess with it some more. see if I can get it going. Thanks for the tips. ANy others ideas would also be appreciated
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
bigjoe2675 said:
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
Click to expand...
Click to collapse
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Sent from my SGH-I997 using Tapatalk 2 Beta-5
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Agreed. On my desktop (quad core 6 gb ram, watercooled blablablabl) can't run heimdal nor Odin to save its life.
My netbook (single core atom) took me back from CM9 with Odin like it was nothing.
My 7 year old laptop (running Ubuntu) works great using Heimdal (just run the .jar file as an executable)
theROMinator said:
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
bigjoe2675 said:
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
Click to expand...
Click to collapse
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
teknhard said:
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
Click to expand...
Click to collapse
I apologize wasn't directed to you just in general and your correct this forum is great...
Then reflash ics lol
Sent from my SGH-I997 using xda premium
threi_ said:
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
Click to expand...
Click to collapse
Because I don't have access to a PC for Odin, and the at&t should work to get me out of brick state. I currently can't get past rogers boot screen
GoSooners345 said:
Then reflash ics lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I don't have recovery.. otherwise I certainly would have
hey gang. have a samsung galaxy s2 i727 (at&t).
tried using the odin 1-click to install ics, but something happened, everything froze, and now i get the dreaded "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
kies won't read the phone, and i'm not sure how i can get into download mode to try and flash the original rom with Odin as some other threads are directing me to do. any advice would be greatly appreciated.
thanks!
Have you tried rebooting the phone with the charger attached?? That always puts me in download mode
Sent from my SAMSUNG-SGH-I727 using xda premium
i was able to get back to stock using odin 1.3. i'd much rather be on ics, but the 1-click odin isn't working for me.
i'll have to look around to see if i can get a tar of the rom.
thanks!
I went through the same thing. I just flashed the rom as soon as Odin recognize the phone and done deal
Sent from my SAMSUNG-SGH-I727 using xda premium
evantonio said:
hey gang. have a samsung galaxy s2 i727 (at&t).
tried using the odin 1-click to install ics, but something happened, everything froze, and now i get the dreaded "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
kies won't read the phone, and i'm not sure how i can get into download mode to try and flash the original rom with Odin as some other threads are directing me to do. any advice would be greatly appreciated.
thanks!
Click to expand...
Click to collapse
When the phone boots to "firmware encountered an issue message" you still in dl mode try the ics one click again or just push a custom recovery and flash a rom
Edit: if possible be sure to ALWAYS check md5 to ensure proper download. That goes for anything you flash to your phone :thumbup:
Sent from my SGH-I727 using Tapatalk 2
cdshepherd said:
When the phone boots to "firmware encountered an issue message" you still in dl mode try the ics one click again or just push a custom recovery and flash a rom
Edit: if possible be sure to ALWAYS check md5 to ensure proper download. That goes for anything you flash to your phone :thumbup:
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yup - figured out the DL mode thing. Just had a bit of a panic at first as the screen is pretty foreboding and it was my girlfriend's phone.
I went from, "Give me your phone, dear. I'm going to upgrade it and be your hero" to "Stop yelling. I didn't break your phone. Just give me a minute to figure out how to fix it."
My problem with the ICS one-click is that the program said it was done, but the phone just hung on the "downloading ROM screen" for 20 minutes. Now that I know how to fix the soft-brick, I want to try it again. The lady, however, doesn't seem too eager to hand over the phone. =]
Wait until she goes to sleep. Shell wake up to a surprise. :beer:
Sent from my SGH-I727 using Tapatalk 2
cdshepherd said:
When the phone boots to "firmware encountered an issue message" you still in dl mode try the ics one click again or just push a custom recovery and flash a rom
Edit: if possible be sure to ALWAYS check md5 to ensure proper download. That goes for anything you flash to your phone :thumbup:
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
thank you so much cd. its getting late and i too was attempting to make my wife's phone better, and i wasn't even thinking about that. i thought i was stuck since it said use kies and kies wouldn't recognize it
SR4130 said:
thank you so much cd. its getting late and i too was attempting to make my wife's phone better, and i wasn't even thinking about that. i thought i was stuck since it said use kies and kies wouldn't recognize it
Click to expand...
Click to collapse
Good search:thumbup:
Sent from my SGH-I727 using Tapatalk 2
Always use twrp for ROM flashing kies always has bugs flashing from phone is the best
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Ok so I've been rooted and unlocked for a while now, but stayed with the stock rom as when I tried out Synergy Nightlies it gave me some errors. So I went to try out CleanRom 2.1, people liked it and I didn't notice any flashing errors. So I flashed it through CWM 6.0.1 and it gave me the yellow exclamation mark saying I had unauthorized data on my phone. So I followed the sticky on how to unbrick my phone using the 2 boot loaders and the root66 stock image. My issue is that when running the root66 stock image through Odin it fails at _XmitData_Read, which seems to be somewhere in system.img.ext4. I've tried rebooting the computer, the phone, Odin, it just doesn't work. So when I reboot my phone after the failure I get Odin auto loading saying:
Odin Mode
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Then an image of a phone, 2 dots, a yellow exclamation, 2 dots and a computer are shown with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Anyone able to help me?
can you still get to odin mode? also if you have kies installed on the computer erase it.
kidhudi said:
can you still get to odin mode? also if you have kies installed on the computer erase it.
Click to expand...
Click to collapse
Kies isn't installed on the computer and yes I am still able to get into Odin Mode.
I'm under the impression that "unauthorized software" message comes from the locked bootloader (if I'm wrong about that someone plese correct me.)
Sounds like you're functional enough to be able to Odin back to stock and go from there - that's what I'd try. See the stickied thread in the Q&A forum.
I would run the FULL VRALF stock image through ODIN to return to stock. That is always the safest way out of a sticky situation.
Thanks guys, according to another post the version of EZ-Unlock I used most likely gave a false report and never actually unlocked my phone. The problem with going back to stock, which if what I'm trying to do, is that it fails.
Could be an USB issue - an intermittent connection would be most likely to cause problems while sending the system partition since that's the biggest. I've had problems using adb from time to time if I plug into one of the front-panel ports on my PC but no trouble with one on the back.
Maybe try switching ports or try a different cable ...
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Strange.... i was able to flash syergy on thefirst try. Never used odin during the whole process....
If youre rooted you need to make sure you have a custom recovery in place like cwm or twrp. Make sure you make a nand-backup.
I used casual to flash unsecure bootloader, with that and recovery in place you should be able to flash roms without any hitches....
I could never find a comprehensive guide on using odin so i never got around to testing it
kintwofan said:
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So far I've tried 3 different USB cables and both a desktop, both front and back ports and a laptop, each one fails on the write of XmitData under system.img.ext4
I had a custom recovery installed and Odin is only being used to get me back to a stock rom, otherwise I did all my flashing under CWM 6.0.1 or twrp. I think the whole fake unlocked bootloader just hard bricked the software.
EDIT: Come to think of it I remember waking up to my phone in download mode. I think Verizon tried to install the update to my phone while I was sleeping. Granted it failed at the end, but I'm wondering if that did something to brick me now.
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yea, I'm currently downloading at the speed of slug the newest update from the forums, will probably just redownload at home, since it's going to take over an hour >.<
EDIT:
Does anyone have a link for an older EZ-Unlocker, that is known to work, so that I don't get this problem yet again.
FIXED!
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
LlirasChosen said:
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
Click to expand...
Click to collapse
I personally suggest not using the app if you already had trouble. Just root your phone using the Debug Root method in Development, download the aboot.img from Adam Outlers thread HERE to your phone, and run the commands at the very bottom in Terminal Emulater app (from the market).
That way you know for sure your bootloader is unlocked. This is what I have done and never had an issue.
Edit: Glad you got your issue resolved!
So I have an old Infuse that my kids use and it went crazy the other day. Not sure what happened. Long story short I keep getting a boot loop at the ATT screen. This phone is not rooted and I'm not sure if it was on Froyo or GB. I've flashed every return from brick I can find on XDA. I'm using Odin and I'm pretty familiar with flashing/rooting etc. Can't figure this one out. The only thing I can think is the boot loaders are not the correct ones? Not sure, I keep seeing GTG's ultimate unbrick but all the links I get to it don't work. this is the only thing I haven't tried. Any help would be appreciated.
Edit to add: After I flash in Odin it goes to reboot then does the open update, verifying update, installing update, successfully installed update package.
Copying media files it says failed to mount/sdcard, can't mount /sdcard your storage not prepared yet please use UI menu for format and reboot. ??? I think that's the problem. How do I fix??
Just search in the stickies for bootloaders. That will solve your problems
Sent from my SGH-I997 using xda app-developers app
COfatboy said:
So I have an old Infuse that my kids use and it went crazy the other day. Not sure what happened. Long story short I keep getting a boot loop at the ATT screen. This phone is not rooted and I'm not sure if it was on Froyo or GB. I've flashed every return from brick I can find on XDA. I'm using Odin and I'm pretty familiar with flashing/rooting etc. Can't figure this one out. The only thing I can think is the boot loaders are not the correct ones? Not sure, I keep seeing GTG's ultimate unbrick but all the links I get to it don't work. this is the only thing I haven't tried. Any help would be appreciated.
Edit to add: After I flash in Odin it goes to reboot then does the open update, verifying update, installing update, successfully installed update package.
Copying media files it says failed to mount/sdcard, can't mount /sdcard your storage not prepared yet please use UI menu for format and reboot. ??? I think that's the problem. How do I fix??
Click to expand...
Click to collapse
If you'd like to try GTG's Ultimate Unbrick, you can find a working download here:
http://forum.xda-developers.com/showpost.php?p=22404446&postcount=391
Tried everything and no go. Not sure where to go from here. Sure seems like a hardware issue.
COfatboy said:
Tried everything and no go. Not sure where to go from here. Sure seems like a hardware issue.
Click to expand...
Click to collapse
You mentioned it's boot-looping at the Samsung logo - perhaps there's an issue with the power button.
Here's a couple of threads that may be helpful:
http://forum.xda-developers.com/showthread.php?t=2107558
http://forum.xda-developers.com/showthread.php?t=1996709
prairied0gg said:
You mentioned it's boot-looping at the Samsung logo - perhaps there's an issue with the power button.
Here's a couple of threads that may be helpful:
http://forum.xda-developers.com/showthread.php?t=2107558
http://forum.xda-developers.com/showthread.php?t=1996709
Click to expand...
Click to collapse
It goes past the Samsung logo screen then to the ATT Rethink Possible screen then keeps looping on that screen over and over. It charges normally also.
COfatboy said:
It goes past the Samsung logo screen then to the ATT Rethink Possible screen then keeps looping on that screen over and over. It charges normally also.
Click to expand...
Click to collapse
I would try flashing just a kernel (not the whole unbrick package). I have been in a similar situation and after trying everything imaginable that's what ended up fixing it for me.
Sent from my SGH-I997 using Tapatalk 2
prairied0gg said:
I would try flashing just a kernel (not the whole unbrick package). I have been in a similar situation and after trying everything imaginable that's what ended up fixing it for me.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Tried that earlier I thought, tried again just to make sure. Still no go. I appreciate all your help! :good: I'm gonna give up for tonight anyways.
COfatboy said:
Tried that earlier I thought, tried again just to make sure. Still no go. I appreciate all your help! :good: I'm gonna give up for tonight anyways.
Click to expand...
Click to collapse
This happened to me earlier. What I did was-
1 Went to full stock using heimdal one click, After completetion, U may stuck in bootloop in at&t as you said
2 Flash efs.zip found in the link below using odin. put efs.zip in odin and untouch any other setting and flash, (Ur imei may be previously corrupted so u got bootloop). This doesnot do any harm. So flash with confidence. If ur device doesnot show up in odin after u flash with heimdal one click , reinstal drivers with kies mini
Link for download http://forum.xda-developers.com/showthread.php?t=1729838
3 Now u'll be out of AT&T bootloop if ur imei was previously corrupted.
I was in similar situation. And this solved my proble.
Hit me thanks if I helped you :good:
Thanks for all the advise. Still not working. Tried everything above and much more. Different things I do give different results but pretty much the same in end. Either sticks in recovery or boot loops one way or another. Really don't see how this could be related to software but you never know I guess.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
tried to root my Skyrocket, tried to put on latest cm10.1 nightly, got system 7 error, someone said to format. Did so, now it won't go past the samsung screen. Can someone help me fix my newb-ness?
Noobs have no business messing with nightlies.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Noobs have no business messing with nightlies.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
thanks for stoppin' by
lookslikescreech said:
thanks for stoppin' by
Click to expand...
Click to collapse
Np, enjoy the skyrocket!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
lookslikescreech said:
tried to root my Skyrocket, tried to put on latest cm10.1 nightly, got system 7 error, someone said to format. Did so, now it won't go past the samsung screen. Can someone help me fix my newb-ness?
Click to expand...
Click to collapse
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Fall of Enosis said:
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Click to expand...
Click to collapse
Uh status 7 is assert protection so its a mismatch usually in device info typically model numbers, and has nothing to do with bad downloads.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Fall of Enosis said:
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Click to expand...
Click to collapse
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
lookslikescreech said:
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
Click to expand...
Click to collapse
Yeah, stay stock until you have a clue on what you're doing.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
lookslikescreech said:
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
Click to expand...
Click to collapse
In this section (q&a), read through "the ultimate newb guide" by vincom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
btm fdr said:
In this section (q&a), read through "the ultimate newb guide" by vincom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thanks, on it now. Just need to get it back to stock with Odin then I'll try again when I understand what I'm doing more.
Anyone feeling charitable and want to tell me how to flash the stock rom with Odin? I'd appreciate it.
lookslikescreech said:
thanks, on it now. Just need to get it back to stock with Odin then I'll try again when I understand what I'm doing more.
Anyone feeling charitable and want to tell me how to flash the stock rom with Odin? I'd appreciate it.
Click to expand...
Click to collapse
It's in the guide bro
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Best of luck mate, reply here if you have any issues. And for pete's sake, next time, instead of watching a YouTube video, read read read and re-read the forums. Once that's done, read them again. Only then, start flashing.
Fall of Enosis said:
Best of luck mate, reply here if you have any issues. And for pete's sake, next time, instead of watching a YouTube video, read read read and re-read the forums. Once that's done, read them again. Only then, start flashing.
Click to expand...
Click to collapse
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
lookslikescreech said:
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
Click to expand...
Click to collapse
Bro, you're going to end up with a paperweight. That guide is step by step. Read it, read it again.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
lookslikescreech said:
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
Click to expand...
Click to collapse
That's an alternate form of DL mode. Odin a stock ROM from that screen. Read the Noobs Guide. Odin is finicky so pay attention to the guide. Then read it again. Once you've read and comprehend it all spin in a circle saying "I deserve this" three times and Odin will grant your wish. lol
hechoen said:
That's an alternate form of DL mode. Odin a stock ROM from that screen. Read the Noobs Guide. Odin is finicky so pay attention to the guide. Then read it again. Once you've read and comprehend it all spin in a circle saying "I deserve this" three times and Odin will grant your wish. lol
Click to expand...
Click to collapse
hahaha thanks
Got it working, used TWRP to flash the latest RC CM 10.1
Got it all going now after a minor heart attack and a few more grey hairs. Just gotta figure out why the wifi isn't working at all now. Can't get it to turn on.
Your original 'system error 7' problem was most likely caused by trying to flash a newer ROM with an older version of CWM or TWRP. Glad you got the phone up, can't help you with the wifi problem, sorry. Although, what modem did you flash, if any? System Settings -> About phone -> Baseband version?
Tom
rpr69 said:
Your original 'system error 7' problem was most likely caused by trying to flash a newer ROM with an older version of CWM or TWRP. Glad you got the phone up, can't help you with the wifi problem, sorry. Although, what modem did you flash, if any? System Settings -> About phone -> Baseband version?
Tom
Click to expand...
Click to collapse
I flashed the UXUMA7 radio, didnt really do much, it worked before.
Still can't figure out the Wifi though :-/ just straight up won't turn on.
If you are on a newer CM 10.1 , the only supported radio is UCMC1, UXUMA7 is really old. That may be why wifi is not working.
UXUMA7 and UCMC1 are very similar. First one is the Rogers and second is att's release which is usually late by a month or so after rogers. Bottom line both will work.
Have your radiofile.zip, cm10.1.zip, and gapps from 20130301 all on your SD card.
Do you have a back up, nandroid? If not do it now.
Go to recovery and Clean up well:
Go to mounts and format data, system, cach twice or three times. Go to advanced and clean dalvik cache. Don't reboot
Now installing in this order:
- radio
-cm10.1
-gapps
Now reboot your phone.
Wait until it is finished and leave it untouched for 10 minutes to settle down and do its thing.
Then turn it off back on and enjoy.
Your noob status will start to fade if you do a clean install :thumbup:
Sent from my SAMSUNG-SGH-I727 using xda app-developers app